I'm completely stumped by a problem with httpd in Fedora 13. It fails to start on boot: I can see: Starting htpd: FAILED, in /var/log/boot.log, but I can't find anything else in messages, audit.log or anywhere else that gives me any clue why. The weird thing is that running: run_init service httpd start after boot _works_ and the server runs fine, but even when it's running OK, service httpd status reports httpd dead but subsys locked
I'm guessing that the problem somehow relates to selinux, but I can't find anything in the audit logs that gives me a clue. How to turn on more logging so that I can get closer to the problem. I finally discovered the cause. This system was originally configured to use network services directly, without NetworkManager. It had been upgraded a number of times since installation. It seems that over time, if you have turned off NetworkManager, the defaults have changed. Used to be that the network services was 'enabled' by default (hence started at run time). Now, the default is 'disabled'. Httpd couldn't start because there was no network to start on. Enabling network services at boot time fixed this. I guess I should have noticed this. But one might think that httpd failing to start because of the lack of a network might at least give a warning message in the logs about the reason.
I have just installed Fedora 11 on a "fresh machine" and everything works ok, except for Apache httpd the message seen in the error_log is the following: Name or service not known: mod_unique_id: unable to find IPv4 address of "myserver"
I have one problem regarding my web server. When I am try to restart my httpd service it shows...
[root@localhost ~]# service httpd restart Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs [FAILED] [root@localhost ~]#
I have installed fedora 13 in my system. httpd server is also installed. when I tried to start the service of httpd, following error message displayed: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
Alright, so I installed the c5-testing versions of httpd, php, and mysql, since my server is used for other daemons primarily and these aren't used as production servers I decided to test the bleeding edge versions of these, report any bugs I find, etc. The problem is, since I updated httpd and mysqld they no longer start up at boot. I tried using chkconfig --add with both of them, but both their init.d scripts have - for levels, so I did not assign any levels. They still do not start up at boot. [URL]
I am trying to get SQL-Ledger installed and running on my computer, which needs PostgreSQL installed to run.Currently, I am having trouble with it starting at boot-up. How can I access the appropriate log files in order to figure out what's wrong?
Also, I need to know what httpd is, and who the owner and groups using that might be on my system.
I rebuilt my box with Fedora 14. installed httpd, mysql php etc. when I tried to start my httpd it was giving me error about finding the root document and server name I was able to fix temp the issue with the name by placing ServerName 192.168.1.105:80 in the httpd.conf file and the root document somehow was fixed also. but I am still can't start the httpd and no error message except that it failed. I also disabled Selinix but still no luck.
Can anyone help me with how to create an init.d script that will startup a vm machine in virtualbox at boot? I found this script:[URL]..But it is for ubuntu. I am running fedora 12 x386 and using it as an Amahi server. Very cool, but it would be extra cool if I had a virtual windows machine startup when I booted up this server. Then I could just rdp into it when I needed something in windows.
httpd have been install by default and I don't start it as services. I have install apache2 but don't want to start as service, I can't add it into the chkconfig. When I try to remove httpd, fedora also want to remove these software.
gnome-user-share i586 2.26.0-2.fc11 installed 809 k httpd-manual i586 2.2.11-8 installed 3.5 M mod_perl i586 2.0.4-8 installed 6.3 M
php and webalizer I don't care as I want to install the new version, but is their any problem removing the other one? Also I want to pount the apache2 documentroot to var/www/httpd but when I do this and try to see the website I got a 403 error (not autorize)
I just did a clean install of FC12 x86_64 and want to configure tomcat to run behind apache httpd. What is the easiest way to accomplish this? I'm a newbie at server configuration so detailed instructions would be nice
I've just setup Fedora 10 x64 on a Supermicro 7045 with dual nic; I setup a web site and ran into a strange problem; I can't see my website from outside my LAN; checking IP on Internet it sees my IP as coming for my dynamic IP (IP of router/switch) and not my static IP.
eth0: Static IP eth1: Dynamic IP
These are standard Intel 82563EB Dual-Port Gigabit Ethernet Controller.
Is there a way to specify the order in which it sees the nic ports?
I'm wonder if I can mix Static and Dynamic IP's; on the outside they resolve to a static IP; the dynamic one shows up as my router/switch IP; but it allows me to access my DHCP computers; this isn't a web server; but a development machine for writing PHP apps.
Where 18.104.22.168 is my static IP address.
I should mention that nmap -v -p 80 22.214.171.124 shows an open port on 80
I just installed FC12 x86_64. After a clean install I found that httpd, mysql, svn, svnadmin, etc are already installed. I still need to install and configure tomcat running as a worker behind httpd and configure everything. But my question is about security. What do I need to do to ensure that when I start httpd and mysql that they are secure? Are there default settings that I need to change? Are there security patches I need to apply?
System Config: Fedora Core 12 x86_64 AMD Athlon II X2 250 3.0 GHz dual core GIGABYTE GA-MA785GM-US2H G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model F2-8500CL5D-4GBPK
I have Apache Server working online under Fedora Core 6. But before I installed and configured everything, I've been testing in Fedora 12. The problem surges here, when I start the httpd service, every supuse 404 action on a web browser, takes me to localhost. I mean, if I enter google.com, no error, just goes to localhost, http://asdasd, no error, gives back localhost. I used to ignore the problem 'cause I thought it was a problem on my apache, but when I installed the Server on the Fedora Core 6 machine, I found that I have the same problem there. Of course, it only occurs when I am browsing through the same machine that has httpd started. Does anyone know how to change that??
Alright, so I upgraded my old fedora 10 server to Fedora 11 with a netinstall CD, but now service httpd restart is broken. I already had to delete the old config file and reinstall apache, but now I can't restart it. I can kill it and then start it manually, but it never stops the running instance and fails to bind the port. I know it's because /var/run/httpd/htpd.pid is in the wrong place, which would be /var/run/httpd.pid, but do I have to make a symlink every time I want to restart it? I edited all the config files to point to the right place, but the system does not honor them. What do I do?
On F13 i386 inside Virtualbox. Host is a Win7 x64 box.
This may just be more idle curiosity than anything else since the server still works. . . but it's really bothering me because I can't explain it.
My (limited) understanding is that the devel files are just the source files and shouldn't actually affect peformance.
Yet, prior to installing httpd-devel (and its dependencies), /etc/init.d/httpd restart takes about 2 seconds total. After installing httpd-devel, the "stopping" phase of the httpd restart take 5-7 seconds (which seems really long when you're just sitting there waiting on it.
yum install httpd-devel also installs the following for dependencies: db4-cxx db4-devel cyrus-sasl-devel apr-devel apr-util-devel openldap-devel expat-devel
All but one of those are devel files as well. And here's the real kicker: Uninstalling them through YUM doesn't put things back to normal (even after reboot).
I'm no linux expert. But I wouldn't think installing devel files would have this effect or any effect like this since they're just source code files (?). Can anyone explain what's happening or give me tips on how I can watch the apache process stop and see what's hanging it up?
Configure the HTTP server via system-config-httpd brings up some nice gui.I start a console, login to root and start it with: system-config-httpdGoto tab Virtual Hosts, then addI name my Virtual Hosts "sea", set its document root to: /home/sea/webs/sea.hs/www where index.php is located for that 'local test server'.Host information is on Name based Virtual Host.But what do i have to enter for IP Adress and Host Name? Neither of these accept 127.0.0.1 nor localhost Further, when i try to exit, it wont let me close the app.Its not saved, hence i can even delete the default virtual hosts and its there again after restarting the app Even with adding sea /home/sea/webs/sea.hs/www or sea localhost.localdomain localhost to /etc/hosts doesnt change anything
i have installed apache and php in my fedora 11 system and httpd works fine except that it doesnt have internet connection for example rapileech doesnt work it says "cannot connect via port 80" and if i put an rss feed collector in a website it doesnt work but everything else works fine , also when i put the same file in a shared web host it works fine
I've just upgraded my serv from fedora8 to fedora12 and got a problem. The httpd and vsftpd add a junk in the beginning of html files. Png, tar and other files are ok. When I make a request to localhost everything is ok.
Code: #telnet localhost 80 GET /1.html <html> </html> but from any other computer.
Code: ..... But this is not an apache problem. When I dl html files from ftp I got the same problem. Iptables is swithed off.
I am trying to get mysql to start at boot without any success.
The mysqld scripts works fine when run from the command line, but it does not work when i use the links created by chkconfig. I checked the boot.log and found that mysql starts but then it stops or gets shutdown. This is the log message:
Starting mysqld daemon with databases from /data/mysql [ OK ] Starting cups: [ OK ] STOPPING server from pid file /var/run/mysqld/mysqld.pid starting DenyHosts: /usr/bin/denyhosts.py --daemon --config=/usr/share/denyho sts/denyhosts.cfg 090727 04:35:47 mysqld ended
While reading some papers on securing apache with selinux, I have tried to bind httpd to port 3000 expecting to be blocked by the selinux, since port tcp 3000 isn't on the http_port_t list. However I was able to start the service...
I'm preety sure selinux is enforcing. Also, if I bind httpd to tcp 81 selinux denies the start of the service, as expected!Did I miss something? Why is httpd allowed to start binded to a port that's not explicitly allowed?