When I click on System Administration Display I get the root pasword entry. I enter the root password and then nothing. I stumbled on another way to set the resolution before but I can't find it now
View 5 RepliesI did not have any /etc/X11/xorg.conf, so I read on these forums that system-config-display would create one for me. I ran system-config-display and it created an xorg.conf. But now my display is all messed up!! So, I deleted the xorg.conf and nothing changed. Why on earth would the display still be messed up if I deleted the file that was causing it?? Does system-config-display change somethign else?
View 14 Replies View RelatedMy machine is a new Fedora Core 12 install. The install did not make an /etc/x11/xorg.conf file by default, which is odd. So, I want to change things with the display. But there's no "system-config-display" in /usr/bin. What's going on? Why wasn't this installed by default? I've had lots of other problems with X on this machine as well:
the 10x20 fonts were missing XFree86-Misc error messages whenever I start an xterm I also receive these warnings, intermittantly, when I create xterms:
Code:
Xlib: extension "XFree86-Misc" missing on display ":0.0".
xmodmap: please release the following keys within 2 seconds:
Control_L (keysym 0xffe3, keycode 37)
xmodmap: please release the following keys within 4 seconds:
Control_L (keysym 0xffe3, keycode 37)
xmodmap: please release the following keys within 8 seconds:
Control_L (keysym 0xffe3, keycode 37)
With this many problems I want to know if there's something in general broken with X on FC12, or was that just my install, or what?
FC10/KDE system-config-display won't run and no error messages in /var/log/messages
# system-config-display
Traceback (most recent call last):
File "/usr/share/system-config-display/xconf.py", line 312, in <module>
[code]...
I just updated from Fedora 8 to 10 to 11 today. When I run system-config-display I get the following message:
Traceback (most recent call last):
File "/usr/share/system-config-display/xconf.py", line 33, in <module>
import rhpxl.monitor
ImportError: No module named rhpxl.monitor
If I comment out that line, the next one fails, and so on. I installed a newer package, 1.1.3-2.fc11, because I thought maybe the installer didn't put it on and that behaves the same. Why this won't run? I would desperately like to use my widescreen monitor and I'm hoping that 11 will finally support my intel graphics correctly.
When I installed F11 it didn't have the i810 driver so it defaulted to VESA. I upgraded to F12 using preupgrade and thought it would re-detect the graphical hardware and didn't. I want to recreate xorg.conf for my computer (Toshiba Satellite A45-S25) so I can use Compiz and some 3D application but I can't find system-config-display. It's missing from the system and I don't know what package it belongs to so I can't re-install it.
View 2 Replies View RelatedI can't change my screen resolution but my fedora doesn't have system-config-display. Trying to install this package and for some reason it is not listed under the add/remove software, and yum says it can't find it either.
# yum install -y system-config-display
results
No package system-config-display available.
Error: Nothing to do
Searching in the add/remove software I found some others such as system-config-firewall, system-config-date and etc but it doesn't have system-config-display. Is there any other way to install this package? currently running kernal linux 2.6.35.9-64.fc14.x86_64 , fedora 14 on 64 bit system gnome 2.32.0
When I try to run the 'system-config-display' program for Fedora 11 and I use the dual head tab, attempting to save the settings results in this:
Traceback (most recent call last):
File "/usr/share/system-config-display/xConfigDialog.py", line 212, in ok
if card.getDescription() == self.secondVideocardOptionMenu.get_menu().get_acti ve().get_data("NAME"):
AttributeError: 'NoneType' object has no attribute 'get_data'
And it won't save the data.
Now that I have system-config-display installed I tried to create a new xorg.conf so I can have 3D acceleration, etc using the correct driver. But the xorg.conf file generated does not work. It locks up the laptop (Toshiba Satellite A45-S250). I don't understand why this happens because the Fedora 12 Live CD (for i686) works find on boot.
I tried looking for the xorg.conf file after booting the live CD but it doesn't exist. I don't understand what is happening here. Also, when I used an older version of Fedora (8 I think) the X driver was i810 which worked fine. It gave me all the 3D acceleration, etc. When I installed F11 it gave me a dumbed down install using the VESA driver. What happened to the i810 driver? Why does the intel driver not work? Why does the Live CD work great but an installed system not?
Necessary info: Toshiba Satellite A45-S25 Fedora 12 (preupgraded from F11)
Am I right in thinking that the system-config-httpd tool doesn't work in Fedora 13?
View 1 Replies View RelatedI can't get the display config to come up what does this mean and is there a fix
[Code]..
system-config-samba doean't work from terminal neither it is shown in graphical mode, i cannot see system > administration > servers. Server is missing.
View 1 Replies View RelatedI'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
Can i use system-config-lvm to resize lv_root from 50GB to 20GB and then resize lv_home to use the new 30GB of space without any hiccups? Meaning I can do this without losing data etc?
View 1 Replies View RelatedI'm curious as to why system-config-services is not installed by default in Fedora 13. IMO it's a pretty important tool for managing a system. I checked the release notes but could not find any mention of its removal.
View 2 Replies View RelatedI looked around, but found no results that really matched and I would like to point out that I am fairly new to linux, so this may be a very obvious answer to some of you.I am running fc12.i686, installed from a disk in the back of a book for a class. No one else in my class is having this issue.When I select System > Administration > Network I am given this error: Failed to execute child process "/usr/bin/system-config-network" (No such file or directory). I am not so new to not realize that this file is not there, which I confirmed with an "ls -a". My question is, is there any way that I can download and install that bin? Or perhaps replace/repair it with the disc? It was supposed to be in the original install and my have been, the only thing that I have done in the /usr/bin/ directory is I tried to install Java (6.22 I think it was), which told me it installed correctly but didn't work when I tried Minecraft.
View 3 Replies View RelatedAfter an upgrade (preupgrade) from Fedora 12 to 14, system-config-boot opens from the menu and displays the right information but does not change grub.conf. I have searched the forums and found nothing like this. It worked before the upgrade. I have forced a new install of system-config-boot. I can change grub.conf manually. There are no SElinux messages that I can find. It would be nice to get the gui working.
View 4 Replies View RelatedNew install of FC12 and after logging into the KDE desktop then going back to Gnome, the Desktop Config File for KDE shows on the Gnome desktop. I ran gconf-editor and I can see the file but no option to not display in Nautilus. Is there an easy way to not display the file on the Gnome desktop without messing up the KDE config file?
View 2 Replies View RelatedI want to reinstall "system-config-network" in Fedora10. I have now system-config-network 1.5.95 and I want to have system-config-network 1.4.3 (it is from fedora8)
View 3 Replies View RelatedI've been running F10 since it first came out, and I was happy to see it was the first Fedora release that automatically recognized my Atheros wireless card. I have to run system-config-network and press the "activate" button when I start the machine, but that's ok and no big deal. But today, for whatever reason,in system-config-network, the "activate" and "deactivate" buttons are grayed out and I cannot start the device so I have no network access. When I boot the machine into Windows, it works fine.
View 2 Replies View Relatedthe icon in system menu for system-config-selinux get lost with last updates.
View 8 Replies View RelatedBeen running Fedora for a while now, iterating up through versions to 12. Decided to to a clean install upgrade to 14. Apparently, bug mistake. Everything seems to be progressing fine, but after 'transferring install image to harddrive', the 'Starting Install Process' fails withsystem-config-lvm-1.1.15-1.fc14.narach.rpm cannot be opened.I have no idea what to do with this. I've reburned the install disk a couple of times (and checked the HASH) -- no apparent problems with the install media.Tech details: x86_64 install on a multi-pro box with a 3ware raid 5 controller (5 disk). I've never run LVMs. Two simple hard partitions (/ and /home). Fedora 12 installed with no problems (as did every other version of Fedora <=12).---------- Post added at 12:29 PM ---------- Previous post was at 11:54 AM ----------Some additional information:1 tried Fedora 13 -- wouldn't even recognize my disks. Installer hung at trying to find basic storage. Not a good sign2 tried my old Fedora 12 install DVD -- again, worked like a charm. Expect that F12 repos are now closed.
So, it seems as if some 'change' between F12 and F13/14 has made some part of the install process choke on my 'hardware' (I'm guessing something related to 3ware RAID card). ---------- Post added at 01:51 PM ---------- Previous post was at 12:29 PM ----------I just tried CentOS 5.5 (x86_64). Also installed fine. For some reason, Fedora >= 13 absolutely won't let me get past the problem noted in the OP. I suppose I could go with CentOS (for long EOL support), but I need some of the newer compiler/dev libs in Fedora 14 for some projects I'm working on.
In Fedora 14, when i try system-config-selinux these errors are displayed.
/usr/share/system-config-selinux/system-config-selinux.py:71: PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text()
xml = gtk.glade.XML ("/usr/share/system-config-selinux/system-config-selinux.glade",
[code]....
I have tried re-installing system-config-network.
root@localhost:/home/kbriggs> system-config-network
Traceback (most recent call last):
File "/usr/sbin/system-config-network-gui", line 48, in <module>
gettext.bind_textdomain_codeset(PROGNAME,locale.nl _langinfo(locale.CODESET))
AttributeError: 'module' object has no attribute 'nl_langinfo'
I'm using Fedora 9 and I recently transferred my hard drive to a new laptop. Everything went smoothly except the wireless, which promptly broke. I played around with the network service and the NetworkManager service and chkconfig stuff and system-config-network, until I finally got it to work. Now I have wireless, but every time I shut down, I get some error-like messages:
"ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command." repeating every second for about 3 or 4 seconds before it finally does shut down.
These also appear in dmesg, usually about 20 in a row, thus my concern. My wireless device's interface is eth3. How to get rid of this message while still keeping wireless connectivity.
when I open this it opens up greyed out for a split second then closes.I started it in a console ,it did the same but the following was left in the terminal
Code:
[tytower@localhost ~]$ system-config-users
Traceback (most recent call last):
[code]...
I was trying to set my wireless to start up when the computer is booted like the regular ethernet eth0 but I can't figure out how to set the WPA pass phrase with system-config-network
View 2 Replies View RelatedConfigure the HTTP server via system-config-httpd brings up some nice gui.I start a console, login to root and start it with: system-config-httpdGoto tab Virtual Hosts, then addI name my Virtual Hosts "sea", set its document root to: /home/sea/webs/sea.hs/www
where index.php is located for that 'local test server'.Host information is on Name based Virtual Host.But what do i have to enter for IP Adress and Host Name? Neither of these accept 127.0.0.1 nor localhost Further, when i try to exit, it wont let me close the app.Its not saved, hence i can even delete the default virtual hosts and its there again after restarting the app Even with adding sea /home/sea/webs/sea.hs/www or sea localhost.localdomain localhost to /etc/hosts doesnt change anything
I switched over to Fedora a couple of days ago. I'm using the built-in firewall shipped with it but I can't find out how to enable logging of dropped packets. Among others I'd like to use psad that needs firewall logging. Is there an easy way to do this? I'm not an iptables "expert".
View 6 Replies View RelatedI can no longer start cups with system-config-services (System->Administration->Services). I am prompted for the root password but it is not accepted. I can start cups in a terminal with
Code:
$ su
Password:
[code]....