I'm trying to send files from a Unix server using http/curl to a Linux webserver running Apache. I get the following PUT error message when and the file does not send:
<title>405 Method Not Allowed</title>
</head><body>
<h1>Method Not Allowed</h1>
<p>The requested method PUT is not allowed for the URL
I would like to find out how I would use both curl and wget to sent an http post to get the hostnames of a few servers. I know am not even given any work of anything I have done, but the reason is that I am really lost, and I do not even know how to start it.
View 4 Replies View RelatedI'd like to permit to start download file when I click over some links. How can I to start download files through http protocol with apache 2?
View 5 Replies View RelatedWe have a cisco ASA firewall at work,which redirects all http traffic to our webserver. We have to install a new website ,but it can't be installed to the same server. Setting up a squid reverse proxy can redirect the incoming http requests to the appropriate webserver? If yes, could I get some directions on howto?
View 5 Replies View RelatedI did a wget on the source and built the apache binaries correctly. Now what do I need to do to get some documents accessible using HTTP (start some services?)? Also, do I need to group all the files I want to make accessible in some directory and make the directory and its contents accessible or can I just make the individual documents available? I will be providing these links to my colleagues and do not want them to be down, so need to make sure that the apache services are up automatically after a reboot. Does apache have some inbuilt support for this?
View 2 Replies View RelatedHi, is it possible to send a request to a http server without using sockets?
View 7 Replies View RelatedThe server I'm running runs Debian Etch, Squid and Shorewall. Every 24 hours the server gets a new internet IP so I need to use dyndns to keep the dns pointing to the correct PC.
I have a webserver that is running behind the debian server and am having trouble with it. When I enter the web address, it gets a timeout.
I have tftpd-hpa and dhcp3-server up and running. I just want to install server edition via network, from the host machine (my laptop, running ubuntu 9.10) with an ISO file (ubuntu 8.04 32-bit server edition). I managed to boot the client machine with pxe-netboot technique, but instead downloading all the files from internet, I need to do this process directly from ISO. To transfer ISO from host to client, I also installed Apache. I unpacked ISO file into /var/lib/tftpboot/server/. I created a link to the Apache root: /var/www
Code:
ubuntu@ubuntu:/var/www$ ls
returns => index.html server
server folder is the place where I unpacked the ISO.
My dhcp3-server has this setup and it works well with netboot, but I don't know how to add Apache to the formula to transfer the iso file from host to client. Firewall is disabled. This is my edited /etc/dhcp3/dhcpd.conf file.
Code:
host pxeinstall {
hardware ethernet 00:06:29:DE:E3:CD;
fixed-address 192.168.2.4; (client IP)
next-server 192.168.2.2; (host IP)
filename "/server/install/netboot/pxelinux.0"; (relative to tftpboot)
} subnet 192.168.2.0 netmask 255.255.255.0 {
range 192.168.2.2 192.168.2.5;
option routers 192.168.2.1; }
When I pxe-boot the client, the process comes to a halt when tftp server is trying to access to pxelinux.0 file. I got thls error:
PXE-T00: Permission denied
PXE-E36: Error received from TFTP server
I have no experience with Apache... so I think there is a problem with my IP addresses.. Do I need to use 127.0.1.1 instead of 192.168.2.1 (my routers IP)?
im looking for a program that lets me monitor server remote a check if apache is running and if its not send out a mail pretty much something like the Big Brother projeckt was before they went comercial i found a few projekts but most havent been updated for years anyone got a clue on any active projekt that does this?
View 1 Replies View RelatedI am trying to setup my webserver and I am trying to make a website to run under suexec but somehow I cannot start my apache it directly fails and SELinux is giving me errors and don't really know what to do with it, it is giving me some command to type but not sure if this will make my server less secure. The SELinux error is as follow:
Code:
Summary:
SELinux prevented httpd reading and writing access to http files.
Detailed Description:
SELinux prevented httpd reading and writing access to http files. Ordinarily httpd is allowed full access to all files labeled with http file context. This machine has a tightened security policy with the httpd_unified turned off, this requires explicit labeling of all files. If a file is a cgi script it needs to be labeled with httpd_TYPE_script_exec_t in order to be executed. If it is read-only content, it needs to be labeled httpd_TYPE_content_t, it is writable content. it needs to be labeled httpd_TYPE_script_rw_t or httpd_TYPE_script_ra_t. You can use the chcon command to change these contexts. Please refer to the man page "man httpd_selinux" or FAQ [URL] "TYPE" refers to one of "sys", "user" or "staff" or potentially other script types.
Allowing Access:
Changing the "httpd_unified" boolean to true will allow this access: "setsebool
-P httpd_unified=1"
Fix Command:
setsebool -P httpd_unified=1
I will write down how I did setup my server so maybe you can see a mistake I did. First I changed my Apache httpd.conf I added the following to it:
Code:
NameVirtualHost 192.168.1.2:80
<VirtualHost 192.168.1.2:80>
ServerName localhost
DocumentRoot /var/www/html
DirectoryIndex index.html index.html index.shtml index.php
</VirtualHost>
<VirtualHost 192.168.1.2:80>
SuexecUserGroup ulyaoth ulyaoth
ServerAdmin webmaster@ulyaoth.org
ServerName test.ulyaoth.org
DocumentRoot /var/www/ulyaoth/www/html
ErrorLog /var/www/ulyaoth/logs/error_log
CustomLog /var/www/ulyaoth/logs/access_log common
DirectoryIndex index.html index.htm index.shtml index.php
ScriptAlias /cgi-bin/ /var/www/ulyaoth/www/cgi-bin/
<Directory /var/www/ulyaoth/www/cgi-bin/>
AllowOverride none
Order allow,deny
Allow from all
Options +execCGI
AddHandler cgi-script .cgi .pl
</Directory>
</VirtualHost>
Then I created the username "ulyaoth" with the group "ulyaoth" as I specified with my suexec, then I created all the directories as specified in my httpd.conf and "chown ulyaoth:ulyaoth (dirname)" them to the right group and username.
I am trying to connect to the web interface found at [URL] using curl. This first requires login information to be entered at [URL], but I am having an issue with the login process. I am trying to submit the following form via POST:
Code:
<form action="j_security_check" method="post" id="login_form" name="login_form">
<center> <table style="background: #cac1cf;FONT-SIZE: 12px;">
<tr> <td align="center" colspan="2">Please enter your username and password:</td>
</tr> <tr> <td align="right">Username</td>
<td> <input name="j_username" style="width: 250px" id="j_username" type="text"/> </td>
</tr> <tr>
<td align="right">Password</td>
<td> <input style="width: 250px" name="j_password" id="j_password" type="password"/> </td>
</tr> <tr> <td colspan="2" align="center">
<input value="Enter" name="enter" type="submit"/>
<input value="Clear" name="Clear" type="reset"/>
</td> </tr> </table> </center> </form>
The command that I am using for this is the following:
Code:
curl -c cookies -b cookies -L -d "j_username=user%40domain.com&j_password=pass" [URL]
The command is properly formatted as far as I can tell. I tested it with another website using a similar authentication scheme using different POST variables specific to the form and it worked fine.
When I run the above command with the -v tag, it reveals this:
Code:
* Connected to lcl.uniroma1.it (151.100.4.74) port 80 (#0)
> POST /sso/j_security_check HTTP/1.1
> User-Agent: curl/7.21.0 (i686-pc-linux-gnu) libcurl/7.21.0 OpenSSL/0.9.8o zlib/1.2.3.4 libidn/1.18
> Host: lcl.uniroma1.it
> Accept: */*
> Content-Length: 44
> Content-Type: application/x-www-form-urlencoded
>
} [data not shown]
< HTTP/1.1 408 The time allowed for the login process has been exceeded. If you wish to continue you must either click back twice and re-click the link you requested or close and re-open your browser
< Date: Sat, 29 Jan 2011 15:26:41 GMT
< Server: Apache-Coyote/1.1
< Content-Type: text/html;charset=utf-8
< Content-Length: 1554
< Connection: close
<
{ [data not shown]
103 1554 100 1554 0 52 5081 170 --:--:-- --:--:-- --:--:-- 10223*
Closing connection #0
I cannot tell why the login timeout is expired when I try to do this, and my investigation toward this end has been fruitless. I saw a brief snippet on Google that vaguely suggested that the underscores in the domain name were at fault, but replacing these with their encoded counterparts did nothing to resolve the issue (that, and underscores should be fine when sent unencoded according to the standards). I have extensively perused the man pages and have come up with nothing to adequately explain this behavior. I also talked to a friend who has worked with curl in his line of work, but he mostly has experience in the context of PHP and has not dealt with this issue before. I am running GNU/Linux 2.6.35-22-generic-pae.
Fedora 14. I have Apache HTTP Server installed and running fine. I am interested in doing some java servlet pages. Am I correct that in addition to the above I need to install another server - for example Tomcat - that knows how to process java servlets? I see that yum has tomcat. And that Tomcat is not an add on to the HTTP Server, but an alternative to it? i.e I start one or the other?
View 2 Replies View RelatedI've had a VPS running Ubuntu 9.10 x64 server, hosting 3 websites of mine for a few months now. This problem has been happening for a while. Every once in a while, probably every 2 or 3 days, I'll wake up in the morning, and apache won't be responding, no web pages will load. /etc/init.d/apache2 status, reports that apache is functioning properly. Every time I simply have to restart the daemon and things run fine for another few days.
I thought maybe it was a memory issue, so I lowered the MaxClients in the prefork module from 50 to 30 a few days ago, but the same thing is still happening. My VPS has 512MB of ram, burstable to 1GB, and according to Virtuozzo, there was only one night of high traffic where I even came close to that soft limit. I've checked my syslog, and there's absolutely nothing in there about apache. I've checked apache's error.log as well, and there's nothing in there that would indicate a problem either.
My server is installed on a guest OS on vmware. It really bugs me because I can't access it from the host OS's browser even though there is no discrepancy between /etc/hosts, /etc/sysconfig/network, httpd.conf files. Issuing ifconfig command also returns the same IP. I have also enabled netwroking in the vmware settings. And I can ping the guest OS's IP from the host.
View 3 Replies View RelatedHow to best manage both http and https pages on the same apache-server without conflicts. For example, if i have both 000-default.conf and 000-default-ssl.conf pointing to mydomain.com, and don't want users who visit mydomain.com without specifically type the https-prefix to be redirected to the https-page - how to handle users using browserplugins such as https-everywhere etc?
Another option would be to create a subdomain ssl.mudomain.com and have users who want to reach the ssl site to have to type ssl. I have tested several things with https everywhere enabled in my own browser, and it seems really hard to make this working the way i want, in one way or another i always end up getting redirected to the ssl-site automatically.
The reason i need this to work is because i run one site that i don't care much about SSL, that is the "official" part of that site, and i also host some things for friends and family on the SSL-part. This would not have been a problem if it wasn't that i use self-signed certificates for my ssl-site and the major user become afraid when a certificate-warning pops up in their browser and therefor leave the site.
A Linux (CentOS5.3) server is setup with apache reverse proxy. The reverse proxy server is opened to outside and an internal server is mapped to ProxyPass configuration. SSL certificate is also installed on the Apache reverse proxy server. The problem is, it is extremely slow in serving http requests through reverse proxy. There is no problem with server resources or bandwidth. When the internal server is directly accessed through Internet, there is no delay. The backend server and the reverse proxy server are also on the same switch (same subnet). When I searched the Net, there were recommendations to enable cache in Apache. I did so as follows in httpd.conf.
<IfModule mod_disk_cache.c>
CacheEnable disk /
CacheRoot "/var/cache/mod_proxy"
CacheDirLevels 5
CacheDirLength 3
</IfModule>
But still there is no progress. Do I want to enable cache in ssl.conf too? Or is there any other workaround to speed up Apache reverse proxy. Is there a way to check that caching is happening?
Ok let's say I have Apache Webservers on 2 different machines within my network, I have http://outterABC.com setup at dyndns.org to point to my modem at home, and my router forwards Port 80 to the ServerA Machine (i.e. 192.168.0.3). I can access my webpage I setup for the Server A Machine.
But what I want to try and do is somehow access my ServerB machine's website that is on my same network. I tried something like this http://ServerB.outterABC.com and the apache page came up with something like the page wasn't available. I want to access the content of the ServerB website, but because I have only one router, i can only forward Port 80 site traffic to my ServerA machine's website. I'm sure it's a different syntax I should use but i'm just not sure what I should enter to bring up the apache root web page for the Server B website via http://outterABC.com
I tried setting up DNS A records on ServerA, but I don't think it will work with what i'm trying to do above.
i want to send mail from unix mail command to my yahoo-id with attachment, but i want to receive it as attachment.
View 1 Replies View RelatedI just want to be able to send emails through my webserver, setup. I couldn't find a dev forum - so thought i'd post here. I'd like to be able to send emails (form my localhost setup) to and from my global client, namely: ( ***@yahoo.com), using PHP and Apache. A snippet from my php.ini file looks like:
Code:
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
; http://php.net/sendmail-path
sendmail_path = /usr/sbin/sendmail -i -t
sendmail_from = example@yahoo.com
Now, I never could get this working in Windows, let alone Linux. I could do with it working though.
I just got SSH access to my shared hosting server (unix). I am current in a directory on the server where there is a file called images.zip. I want to download this to my desktop (I am running windows locally if that matters). Which command do I need and what is the syntax?
View 8 Replies View RelatedI want to write a shell script which will copy files from user Mac machine to UNIX Server without prompting userID and Password. I do not want to use ssh or rcp commands as it prompts for password.
View 5 Replies View RelatedI'm working on an application that requires a large amount of storage space and I want to handle storage `in-house` (Much cheaper than, say, S3) so we will have multiple servers (Initially 4) with large amounts of storage (6TB each). The storage will need to be very flexible and configurable, each piece of data should be replicated on at least 2 servers and must be easily readable/writable from ether an API of a UNIX device/file/folder like a normal drive, I don't mind which. We must also be able to easily offload content to our HTTP CDN (Edgecast), it doesn't need to have built in HTTP support but if it doesn't I'm going to have to write something to get the files onto HTTP so they can be pulled by the CDN.
I've looked at a lot of solutions including
Eucalyptus Walrus
OpenStack Object Storage
MogileFS
MongoDB GridFS (I'm not sure why, it just sounded cool =) )
and some others which I can't remember
All the servers will be running RHEL 6, they have 4x1.5TB drives which will be RAID1'd into a single partition. All the servers have 1GB/s connections between them and 100MB/s connections to the internet with unlimited bandwidth. They have 2x2.66ghz processors. I understand there isn't a single, perfect answer but it would be nice to get some pointers.
I am running 11.3 64bit. I need to set up a simple web server, and I was trying to follow this tutorial to do it HowTo: Configure a Linux Apache Web Server on Suse/openSUSE for SSI, Includes, CGI, Common Gateway Interface, AddHandler, ExecCGI, AllowOverride, htaccess, DocumentRoot The web server is running but this part could not be applied and I need to change the ownership. it seems the command lampserver does not exist.
[Code]...
I need to setup a web server with apache (worker) and php. What is the cleanest way to this with Debian Squeeze?
View 1 Replies View RelatedI have a question about using ubuntu to download files from an HTTP server remotely and didn't know where to put it, so hopefully it falls under general support. Anyway, I am about to move into a place with an incredibly slow internet connection and a tiny data allowance and my brother has said that, if possible, I can use his internet connection to download any large files to a box I can just leave at his place, then I can simply come over to his place every few weeks and copy said files to a hard drive and all will be well. The problem is that I am not sure how to do this.
Today I went out and bought a few parts and built a cheap computer with a HDD big enough to hold whatever I need, however when I got home I realised I had no idea how I was going to handle the software aspect of this. Is there any way that I can access that computer remotely over the internet and schedule fairly large downloads from an http server? Also after talking to a friend I was told that I need to install the server version of ubuntu if this is to work, is this correct? Also, if its relevant the specs of the computer I have for this is using an "Intel Desktop Board D510M0 + Intel Atom Processor D510" which uses 64 bit architecture.
A question that I've asked myself (and google) many times but never got to an answer.Scenario:ServerA) postfix Primary MXServerB) postfix Backup MXAccording to the rfc a source mailserver can decide where to send email e.g.send an email to backup even is primary is reachable up and running.So my questions are: 1) how do I (live I mean) replicate messages arrived on any server to the other?2) How do I synchronise sent messages, message deletion, folder creation/deletion.Imapsync goes half way towards the solution but it needs to be run manually one off and you must specify source and destination.All I wanted really is a user to be able to use either server without having to worry about primary/secondary or what so ever.
View 4 Replies View RelatedI have installed VirtualBox on a MacBook and installed RHEL6 on a guest server ("Orion") in VirtualBox. I am trying to follow the tutorial at xenocafe on Apache Web Server Tutorial for Linux. I've checked a few other websites for port forwarding, and have used VBoxManage to set
Apache/GuestPort" 80
Apache/HostPort" 8888
Apache/Protocol" TCP
[code]...
I am able to ssh into the Virtual Box guest server using:
$ ssh -l rmt1 -p 2222 localhost
I believe this means that the port forwarding works. I am able to start and stop httpd on the guest with no warnings. I retired a problem with DocumentRoot by setting SELinus to disabled. My trouble is that: When I bring up a browser on the host and try localhost 8888 and expect to see my sample html page housed on the guest server (located under root / www), what I get is a spinning wheel.
And when I bring up a browser on the guest and try localhost 80 and expect to see the sample page I made, what I get is the well-known Apache test page. I am stuck in knowing (1) how to cause port 80 output from the guest to be interpreted by the host browser searching port 8888 (Or, Why does ssh into the guest work but http out of the guest not work), and, (2) how to arbitrarily determine the location of what the very first webpage is that will be loaded.
Is it true that the UNIX commands to send a file to a printer for printing are system-dependent?
View 2 Replies View RelatedI've tried to copy my files from Xamp httdocs in windows to /var/www/html,
but I can't paste the file, what should I do so I can paste the files ?
I have logged in as a root..
I have setup a Linux Centos with apache server on it in a home network. Everything works fine. When I access the webserver I put in the address bar the IP address of the server which is 192.168.0.150 and when hit enter, it prompts the page where I have to put login information. The login information is set to: username: admin@localhost.local password: *************
It takes long time for authentication go through and load the page eventhough I am accessing the site in a same home local area network with fast ethernet connection. How can I change the localhost.local to something else like maybe [URL] instead and if I have to change settings in other files as well?