Fedora :: Printing With F12 - Printer Stops After Generic Error
Apr 28, 2010
I've recently decided to migrate the infrastructure in my workplace from ubuntu to fedora, every thing except the printers went perfectly. When I try to print as an user It just throws an generic error and stops, as a root it doesn't even show the error.
This is the debug log:
Code:
D [28/Apr/2010:04:22:03 +0200] cupsdSetBusyState: Dirty files
D [28/Apr/2010:04:22:03 +0200] cupsdReadClient: 12 POST / HTTP/1.1
D [28/Apr/2010:04:22:03 +0200] cupsdSetBusyState: Active clients and dirty files
D [28/Apr/2010:04:22:03 +0200] cupsdAuthorize: No authentication data provided.
D [28/Apr/2010:04:22:03 +0200] cupsdReadClient: 12 1.1 Get-Jobs 1
D [28/Apr/2010:04:22:03 +0200] Get-Jobs ipp://localhost/printers/ .....
It worked fine in debian and ubuntu, so we can assume that the drivers are ok, any ideas?
View 5 Replies
ADVERTISEMENT
Jul 20, 2009
I have a FC11 box, with an HP prineter attached. I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5. I am not sure what is missing. when I tried to print from the XP box I got "Test pge failed to print" error.
View 9 Replies
View Related
Apr 1, 2011
I am trying to install a HP deskjet 1000-J110a. I downloaded a driver package thing, and I guess I unpacked it, and I made it, and I thought I installed it. I am totally confused and my brain hurts. The printing troubleshooter is telling me: Missing Printer Driver
Printer 'Deskjet-1000-J110-series' requires the 'foomatic-rip-hplip' program but it is not currently installed. I found something that is the 'foomatic-rip-hplip', but what the heck do I do with it?
View 9 Replies
View Related
Dec 28, 2010
I have been able (with some hair pulling and gnashing of teeth) to print from outside the LAN to the printer connected via USB to the desktop computer at home, until the last upgrade. The laptop will forst say the printer may not be connected, but eventually (usually) after a while says the job was sent to the printer. The log files on the desktop - serving as the printer server have an error message in cups/error_log that I am not familiar with, and don't believe I have seen before. I am sure if I could decipher that error and figure out how to change the behavior to get rid of it, it would once again work. Printing from within the LAN is a no-brainer as it has been for the last several releases. The error that I get when trying to print outside the LAN (via the internet) is:
cupsdAcceptClient: 12 from <WAN IP>:631 (IPv4) Unable to encrypt connection from <WAN IP> - GnuTLS internal error. I am missing something as far as authentication from the laptop to the desktop. how to fix it.
View 1 Replies
View Related
Dec 8, 2009
I'm running Fedora 11 and printing to both an HP Laser Jet 4Plus and HP Office Jet 7130 via a Windows 7 PC. I have a UID/PWD account on the PC that differs from that on the Fedora, also one that is identical UID/PWD to that used in Fedora. This has worked fine until "recently" (noticed it in ~last week or 2). Suddenly I'm being asked repeatedly to authenticate to print, neither account credentials are working. I get the message "Tree connect failed (NT_STATUS_ACCESS_DENIED)" and I get nowhere. I tried delete and reinstall the printers in Fedora, that works OK, can "see" them in setup on the Windows 7 host just fine. But can't get past the repeated authentications ...? I'm guessing something has changed in Fedora updates because this used to work with same Windows 7 PC in prior weeks.
View 1 Replies
View Related
Oct 15, 2009
I have a windows machine on my lan with a printer attached. I have samba running on my F11 laptop and I can use it to access shared files on the windows machine. But how can I use the printer from fedora? When I go to Administor>Printers then I just get an empty list, even after pressing 'rescan'. Do I have to change some firewall/samba configuration? If not then where else would I see the printer?
View 2 Replies
View Related
May 29, 2011
i recently installed fedora 14 xfce and i have a printer laserjet p1007 hp connected. the printer gets detected but there is an error while installation (i.e when i run hp-setup) it gives an error that some binary drivers missing. i refreshed the package list also. but still the driver does not get installed..
View 1 Replies
View Related
Oct 1, 2010
I have recently installed Fedora 13 dual booted with windows 7. Everything on both OS's works fine with the exception of Linux printing. I am using a Netgear WGPS606 print server. (it works fine on Windows 7). I have, from Linux pinged the server (192.168.1.200) and have gotten a response for each string sent but following the usual procedure [System-Administration-Printing then Add (a printer)- Expand Network Printer etc.] The response is that there is no printer found at that address. (the firewall was disabled).
View 4 Replies
View Related
Nov 20, 2010
Did anyone have any luck getting dell v305 printer to work on linux ? do u guys know any generic drivers for it?
View 2 Replies
View Related
Jan 1, 2010
I have had good success with the HP OfficeJet 6310 printing and Karmic. However, recently when printing, the print job stops after a certain amount of pages ( when printing a multiple page document ). The first page almost always prints immediately. This issue occurs with PDFs, OO Writer documents and OO Spreadsheet documents. The printer status window on the printer shows "printing" and the print manager in Gnome shows printing. Sometimes the printing completes after several minutes. Other times I end up killing the job and powering down the printer.
View 9 Replies
View Related
Jun 4, 2011
I'm having trouble with printing a PDF that is in landscape mode. When I tell Okular or Adoble Reader to print a document in landscape mode, the text is Illegible. If I tell it to print as portrait mode, then I can read the text but the end is cut off and there is no way for me to tell Okular or Adobe Reader what the margins are. That option was grayed out.
I'm having another problem: When I cancel the job from the CUPS interface, it says it canceled the job but the printer keeps going and finishes whether I want it to or not. With 11.2, I was able to have it set up so that when I told it to stop the printer, it did so right away. Why can't I get the printer to stop in the middle of a job if I see something wrong with it so that I don't have to waste ink?
View 9 Replies
View Related
Jul 2, 2010
How do I stop a printer from printing? Here's what happened- I started to print some PDF stuff and then changed my mind. The printing job hadn't finished so I just clicked on the printer icon and selected QUIT. Well, of course that didn't work so I just turned the printer off......same result- when I turn the printer back on it keeps on printing the same stuff. How do I stop the printer from continuing and delete all print jobs?
View 2 Replies
View Related
Jun 25, 2009
I googled this, to no avail. I've restarted cups, to no avail.This is a Networked Printer, but i have little doubt that can be ruled out as an issue.If i want to print an Image or Plain Text file, i get this error; if i print with OpenOffice, i do NOT get this error and it prints fine.I have also gotten a similar error, like "permission denied" or something, but i cannot recall exactly what it said, and cannot seem to recreate it at the moment.I have been getting this for quite some time now (months), but never found out why. Any ideas?
View 14 Replies
View Related
Oct 19, 2010
I have installed an HP LaserJet 2200 network printer using CUPS successfully and can print test pages and stuff from OpenOffice, Evince etc. But no luck printing from lpr. Using lpstat seems to suggest all is well:
$ lpstat -t
scheduler is running
system default destination: HP-LaserJet-2200
device for HP-LaserJet-2200: socket://192.168.10.42:9100
HP-LaserJet-2200 accepting requests since Tue 19 Oct 2010 14:01:50 NZDT
printer HP-LaserJet-2200 is idle. Enabled since Tue 19 Oct 2010 14:01:50 NZDT
Ready to print.
If I now try to print 'test.txt' using:
$ lpr test.txt
nothing happens. Try calling the printer by name:
$ lpr -P HP-LaserJet-2200 test.txt
lpr: HP-LaserJet-2200: unknown printer
I have added my user name to the lp and lpadmin groups. Trying the above as 'sudo' results in the same result. The only thing I've noticed is that when printing something from OpenOffice, in the document print status I get the message 'Processing - not connected?', although printing still works.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_NZ.UTF-8, LC_CTYPE=en_NZ.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
View 1 Replies
View Related
Jan 23, 2011
In December I finally filled up my root partition and broke Suse 11.1. I therefore resized my partitions and installed Suse 11.3 on /root. I didn't not touch my /home partition.
Last week I had a paper jam in the printer. This has been cleared and as far as I know the printer is now fine. However the printer will not print. In url, it says printing has been paused, but I cannot find resume printer/printing anywhere.
I have tried Google, but the instructions do not appear to match where I would find 'resume printer'.I am able to provide further information.
View 3 Replies
View Related
Nov 2, 2010
I have an HP C4795 printer and lately when I print something nothing happens until I reboot and then the printer will print. How can I fix this problem? This was printing from Okular pdf reader.
I'm running openSuse 11.3 KDE 64 bit.
View 7 Replies
View Related
Apr 9, 2011
I am not sure if this is the right place for this or not, but I am having a problem getting my HP6300 series all in one printer to print photo's with proper colors, all colors seem to run. I have hplip installed and set up to print photo's and it still prints colors like runs instead of correct.
View 9 Replies
View Related
Feb 17, 2010
I have a brand new Canon MF4350d printer/copier/fax/scanner installed and shared on XP that I can't get working on Ubuntu!
XP prints test pages fine. Ubuntu sees the XP shared printer, it sends print jobs, and the XP machine even receives the print jobs (I can see them "spooling" in the XP print manager) but then nothing happens. The job leaves Ubuntu showing 150k but then shows 50 bytes when received in XP before disappearing from the queue.
How I got to where I am...
There was no native driver in Ubuntu for the printer, so I downloaded Canon linux drivers source and compiled (including make install) based on some other threads I've found such as this one.
Compiling left me with PPD files that seem to be specific to the MF4350, although their names show MF4350z not MF4350d. I'm not sure why there were three different files with slightly different names (CNCUPSMF4350ZJ.ppd, CNCUPSMF4350ZK.ppd, and CNCUPSMF4350ZS.ppd).
I added the printer manually using the Ubuntu printer browser setup (Samba) and selected the .PPD files manually. I've tried all three different .PPD files to no avail.
I've toggled bi-directional comm. and tried different print drivers on XP. Nothing's worked yet.
View 8 Replies
View Related
Feb 4, 2011
Been using ubnutu gnome for a loooong time and my printer (Canon MX340) has been running just fine, configuration and usage.
I now switch to kde. configure my printer the same way i would under gnome and as soon as i send a job, it processes for about 3 seconds and just marks "stopped" under status. nothing goes through anymore!!
i've updated from 4.5 to 4.6 with backports and nothing is happening on there either.
im running maverick amd64 and using the i386 drivers (with dpkg -i --force-all) which are still recognized even under kde.
p.s.: the printer normally runs as wireless standalone (no samba/cups involvment whatsoever)
View 9 Replies
View Related
Apr 24, 2011
Thought I'd post this as I couldn't find much about it online. I have an HP3745 and am running Ubuntu 10.04. For some reason I couldn't get anything from the black ink cartridge in test mode or for real. The printer would go through the motions but would return a blank page. Turns out it was because my COLOUR ink cartridge was empty!! Solution was simply to select print in grayscale. Also I find with this particular printer HPCUPS works better than HPLIP.
View 1 Replies
View Related
Jan 15, 2010
Is there a way to print from a Canon MX 330 All-in-One printer in Ubuntu 9.04? I'm trying to print through a Linksys WRT54G router. The printer is physically connected to a Desktop PC running Windows Vista (64-bit).I've tried installing the printer though CUPS to no avail. I tried the iP4600, iP3600 and iP2600 drivers and none of them have worked for me. I've even tried the Gutenprint PIXMA IP4600 drivers.
View 2 Replies
View Related
Feb 26, 2009
From my Ubuntu Server 8.10, when i attempt to print to my network printer(Brother HL2700cn) it prints garbage and multiple blank pages. I also tried installing the Brother print driver (BR2700_2_GPL.ppd) as instructed, placing the file in directories: /usr/share/cups/model and directory /var/spool/lpd and restarted cups: /etc/init.d/cups restart. after all that, i get the same results, garbage and multiple blank pages. the printer has a static ip address
View 6 Replies
View Related
Jan 20, 2011
I'm running Red Hat Linux and CUPS 1.2.4. I can print a test page to a Win 7 shared printer ok. However, when I issue the lpr command from a user or root, it won't print. The CUPS message is "Remote host did not accept data file (1)" and the job just hangs till I cancel it. The only thing I can tell that is different is that when the test page from CUPS is generated, it uses user "guest". When I try to print it using the lpr command, the user is "eddie" or "root". I tried adding a user account named "eddie" to the Win 7 box, I can print successfully from both CUPS and users on several other Win XP boxes.
View 11 Replies
View Related
Mar 28, 2009
I have a recently installed dual boot system with Centos 5.2 and Fedora 10. I connect across a LAN to a network printer HP Laserjet 1320n I have been through the printer installation / setup on both systems Fedora works fine, Centos doesn't want to know. Sending anything to print just adds it to a queue that is never printed.
I have looked at the printer management through Firefox browser localhost.localdomain:631 If I send a test page from here (CUPS) it reports the document as printed, but the printer just sits there blinking an orange light indicating an error.
View 3 Replies
View Related
May 14, 2011
I have a problem with LVM. My installation of Fedora 13 is on 2 SATA hard disks, which are set as /dev/sda and /dev/sdb. On sda there are two partitions (boot and a physical part of the volume group) and on sdb is only one partition (other physical part of the volume group). Both physical parts of the volume group are used for one volume group and the VG is splittet into multiple logical groups. The system works and all seems to be ok. But I saw a strange thing on last reboot:
The device /dev/sda was not recognized during the boot sequence, instead the system has build a device /dev/md126p1 with the same geometry and partitions and it has the same disk id as sda.
The volume group is also ok, the system boots into the desktop environment, but the system-config-lvm says that /dev/sda is not initialized and the volume group consists of sdb and md126p1. fdisk -l knows three devices (sda, sdb and md126p1). I think, that is the reason for my problems with preupgrade, which stops after the reboot with a LVM problem (root not found). Can I correct that without data loss?
View 1 Replies
View Related
Feb 10, 2010
Everytime I get HPLip working with my printer, it will only work until I shutdown the computer. On next restart, it no longer works and the only way to get it to work again is to delete the printer configs in hplip and re-create them!
View 2 Replies
View Related
Apr 7, 2010
I want to print from my linux box to my win7 pc that has a shared printer. I have cups installed and tried to add pritner using samba, but was unsuccesful, gave me an error when trying to add. The guide i followed is: Yet another Linux to Windows printing tip -- Debian Admin The printer model is a dell 2330d laser printer, it is not in cups, so i added the ppd file i got off the dell support site. I am aware that there is a native suse driver, but i want to print to the windows printer.If possible I would like to know how to do this via command line instead of the GUI.
View 9 Replies
View Related
Jun 30, 2010
I am currently running Lucid on my system and can't seem to get my printer on a Windows XP computer to print documents sent from my Ubuntu computer. I can see the Windows XP computer in Nautilus under Network and can even access the shared files on the Windows computer with no problem. I have been able to install the Windows shared printer on my Ubuntu computer using System>Administration>Printing>Add>Network Printer>"Windows Printer via Samba" without any error messages. The problem is that whenever I send a printing job to the shared printer, the printer acts like it is going to start printing then automatically stops just right before the paper is going to be fed. I have memorized the noises my printer makes right before the paper gets fed. That is how I know it stalls right before the paper is about to be fed.
When I check the print queue on my Windows computer, its status is "printing", but it never does. I have tried this with two different HP printers (Deskjet 3940 & PSC 1410), and it is the exact same problem on both.
View 1 Replies
View Related
Aug 30, 2010
I have a Brother MFC-665CW printer and finally got it connected via wireless. I always unplug my printer when I am not using it. But every time I plug it back in and print something, it always do a cleaning of the printer heads before printing.
System stats:
Running: Ubuntu 10.04 32 bit
What else should I add to the system stats?
View 2 Replies
View Related
Sep 5, 2010
I apologize if I'm a little wordy. I'll give the problem, then a detailed list of my setup (to help troubleshoot). Problem: I can't print from Ubuntu 10.4 on my Win7 shared printer. I also can't connect to the Win7 computer sharing the printer (probably a related problem).
Error Message:
1.) I click on Places, Network, Windows Network. I get an error that says "Unable to mount location, Failed to retrieve share list from server."
2.) I click on System, Administration, Printing, Add, Printer, Network Printer, Windows Printer via SAMBA, Browse..., and I get this error "No Print Shares, There were no print shares found. Please check that the Samba service is marked as trusted in your firewall configuration. To do this select System->Administration->Firewall from the main menu."
Network Configuration: I have a wireless/wired network (using a router) where the Ubuntu machine connects wirelessly and the Win7 machine connects wired. The Win7 machine is on a Win7 homegroup and custom named "workgroup". There is a username/password to log into the Win7 Machine. My other Win7 laptop connects just fine to the Win7 desktop's shared printer (and network drives). I know it isn't a issue of it not working (at least with other Win7 machines)
Problem: I'm assuming there is probably a setting in Win7 that needs adjusting (although I've looked at about everything I can find). I also don't know much about Ubuntu so it could very well be something I need to setup in Ubuntu. I checked already to make sure that SAMBA and the smbfs plugin is installed.
View 4 Replies
View Related
