Fedora :: OpenOffice Installed But Not Shown In F12
Dec 10, 2009
I am using fedora 12 genome. I install open office 3.. by these command:
1- tar xvzf OOo_3.0.0_LinuxIntel_install_xxxxxx.tar.gz
2- su to root
3- cd into the RPMS( where all RPMS package were present)
4- BY RPMS auto installer. I install all package.
There are two folder in my "/opt" folder. openoffice.org and openoffice.org3. But office is not shown in application start menu, but when we check it by add/remove software option this is show that it install.
View 1 Replies
ADVERTISEMENT
Oct 29, 2010
I have openoffice installed but when I click on .odt or any other file types associated with it, it opens the archive manager. For now, I have added the application using "soffice" which will open it. But I have to right click every time I open it, which I don't like, and is a little bit embarrassing when I show off my system to those poor prisoners of microsoft.
I had a hayell of a time getting it installed! I used the software manager which finally worked. But it never put any menu shortcuts in the applications menu, so I had to go on an easter egg hunt to actually find this "soffice" thing, which actually only opens up the general Open Office project manager.In short, what I need is for Open Office files to open with Open Office.
View 13 Replies
View Related
Jun 10, 2011
I am running ubuntu 11.04. Compiz seems to be installed as shown by green in Synaptic along with some other related packages. I have now marked compiz-fusion bcop & Emerald & installed them. Both turned green in Synaptic. While Emerald Manager is seen in the System Preference list, Compiz is not seen anywhere. How to launch Compiz?
View 2 Replies
View Related
Sep 1, 2011
I have installed d4x its not showing in Ubuntu 11.04 dash but its showing as installed in software center. I have tried the command of "which d4x" and I got nothing.
Code:
assassin@genupulas:~$ sudo dpkg --configure d4x
[sudo] password for assassin:
dpkg: warning: there's no installed package matching d4x
Code:
assassin@genupulas:~$ which d4x
assassin@genupulas:~$
View 5 Replies
View Related
Mar 31, 2010
I installed sun virtual box 3.1 by double clicking on its .deb package and it said it has been successfully installed, but I can't see it in the applications menu, what's wrong ? It's listed under synaptic package as installed after completing the installation
View 3 Replies
View Related
Dec 14, 2009
I'm trying to install a language-pack for my OpenOffice, but there seems to be a dependency-problem. Maybe someone has a suggestion. FC12, x64 OOo.x64 3.1.1
Code:
[root@sarah yum.repos.d]# yum install openoffice.org-langpack-de
Loaded plugins: fastestmirror, presto, refresh-packagekit, remove-with-leaves
Loading mirror speeds from cached hostfile
* fedora: ftp.astral.ro
* livna: rpm.livna.org
[Code]...
View 6 Replies
View Related
Mar 16, 2011
I have OpenSuse 11.3/64 with OpenOffice and want to use some additional (ttf) fonts.
They install fine in KDE (configur desktop / fonts ) and are available in progs like Gimp. But Open Office doesn't recognize the new installed fonts. What am I missing here?
View 1 Replies
View Related
Sep 26, 2010
I just reinstalled Ubuntu Lucid Lynx and an old problem has come back. For some reason I couldn't fix it even in my previous installation. The problem is the top gnome panel. See the photo below: As you can see, the network icon is not shown properly while the Me menu is being shown twice. I can't even restart or log out or shut down at this situation without pressing the keystroke to turn the power off.
View 9 Replies
View Related
Feb 1, 2011
Yesterday I disinstalled with yast java-1_6_0-openjdk-1.6.0.0_b20.1.9.2-0.2.1-x86_64 and java-1_6_0-openjdk-plugin-1.6.0.0_b20.1.9.2-0.2.1-x86_64 (which were installed as part of our sitewide suse 11.3 installation) and replaced them with java-1_6_0-sun-1.6.0.u22-1.2.1-x86_64 and java-1_6_0-sun-plugin-1.6.0.u22-1.2.1-x86_64 (et al) to solve my problem about bad graphics quality in firefox applets as described and suggested in this other postl.That successfully solved my applet problem, but I just discovered it triggered a new problem with openoffice . I tried opening an existing sxc document and got this error message:[Java framework]sunjavaplugin.so could not load Java runtime library: file:///usr/lib64/jvm/java-1.6.0-openjdk-1.6.0/jre/lib/amd64/server/libjvm.so.
It looks like that openoffice is still looking into the old openjdk instead of the new sun java. How can I repoint it to use the current java (assuming it really needs it) ? Apparently even entering openoffice on a new document gives error in a popupOpenOffice org requires a JRE to perform this task. The selected JRE is defective. Please select another version or install a new JRE and select it under Tools-Options-OpenOffice org-Java ... but since openoffice does not start I cannot access those options I guess (or is such stuff located elsewhere, and if so where) ?
View 5 Replies
View Related
Feb 5, 2011
I am running Suse 11.3 64bit and OpenOffice 3.2.1.4 it installed with the system.OpenOffice's latest is 3.3 something, is there a repository that I can add to continuously update the program? Or do I need to completely remove the present program and install the latest from OpenOffice.org? It would appear that the one that came with the system was pieced together by the Suse team - do they update this at all?
View 7 Replies
View Related
Jun 18, 2010
I was looking for some alternative and find go-oo. I installed them:
[Code]...
I have openoffice installed. but there is no gooo. is it a different package or plugin to work with openoffice?
View 2 Replies
View Related
Feb 13, 2011
I installed openoffice. installation seemed to go well, but openoffice doesn't show up under main/applications/office. in fact - it doesn't show anywhere.
I did find it using "find files/folders" ...in the folder:
There's a file called soffice of Type: Shell script that runs openoffice. How do I add this to my menu?
View 5 Replies
View Related
Jan 1, 2011
iam working on F14 KDE 64-bit ....i installed Matlab today it was installed successfully with no errors at all but when i try running it from /usr/local/MATLAB/R2010b/bin/glnxa64/ ..... the Matlab logo shows up then disappear again .and with no errors.. i opened the system monitor to see that Matlab is running ..... i searched the web and got that Matlab makes problems with selinux so i turned it off ...and still the same
View 6 Replies
View Related
Jun 1, 2011
Login image is not shown in F15.Worked in F14.I have amd64 version of F15.
View 2 Replies
View Related
Apr 21, 2009
I have 5 or 6 computers on my home network. Most of them are wired connections, a few wireless. All the Linux machines run Samba and they are all configured identically. Workgroup name is the same on all, user=share on all and they all have a share or 2. I can ping any one from any other but they don't all show up when I run smbtree, usually from my wireless laptop. Maybe I should run it on all the Linux boxes and see what the result is, but I've never done that. My question is, why do they not all show up? One of them never shows in the list. The Windows boxes always do.
View 10 Replies
View Related
Jun 8, 2009
I'm trying to upgrade my current fedora 8 box to fedora 10. I downloaded the cd images and burned from the fedora website. After I booted my laptop using the fedora installation cd, the anaconda program started and went immediately to the keyboard selection, language selection, etc. but no upgrade option screen was shown at all until the point that I have to choose my partitions where it was obvious that a fresh installation was being done.
Using crtl+f2 I checked the /tmp/anaconda.log file, whoch has the warning: "step install type does not exist". At this point I do not know exactly what is going on.
View 11 Replies
View Related
Mar 10, 2010
There is a thread in this forum that points to this website [URL] as a place for good directions on getting the new Java and the new Firefox to cooperate with one another. I followed it and was unable to get that to happen. To test it I used the official U.S. clock website. Don't quite know what to ask, except what did I do wrong? I following the directions to the letter, but in the "aboutlugins" part, Java doesn't show up.
View 7 Replies
View Related
Aug 11, 2011
i just downloaded the newest kde spin from fedora's web site.installed fine, but have noticed that only 3.2 gigs of 4 is being shown on the os.the bios see's 4.this doesn't happen on windoze but it happened on linux mint 64 bit also.why is linux distro's not seeing it?
View 6 Replies
View Related
Feb 7, 2011
I need to create this link between the two directories shown below.... So I assume everything that is put into the outgoing directory is copied to
# pwd
/home/e-smith/files/users/admin/home
ls -l
lrwxrwxrwx 1 root root 29 Jun 25 2008 outgoing -> /var/spool/asterisk/outgoing/
View 5 Replies
View Related
Sep 12, 2009
I am having difficulty with my brother hl-2040 printer. Linux recognizes the printer and it's set as the default. The job shows up in the printer queue as completed, but nothing comes out of the printer.
View 5 Replies
View Related
Jul 5, 2010
I've always been a fan of Fedora since the first distro. I remember downloading 4 cds and then relizing that I only needed one. ;D Anyways, I've been using Ubuntu for years. I've gotten tired of the Ubuntu fan boys and just the responses I get from saying that Ubuntu was my distro. I've moved to Fedora to simply learn and understand the yum system which I already enjoy using in the terminal.
All of that set aside, I've kept my Ubuntu /home partition (ext4) in tact as I always do moving from distro to distro and have never had a problem. The thing is, all the distros I've tried have deb based. Now, my /home partition is roughly 56gbs. Nautilus shows free space as 8gbs currently on my parition so I know the files are still there but why won't Fedora read them? It must be a permission thing, but what? If I must loose my /home it's fine, however I'd much prefer not to.
View 5 Replies
View Related
Sep 16, 2010
I did some modification of fstab, and works, but for some strange reason, there are drives shown in the Places menu that shouldn't be there when the drives (they are usb drives) are unplugged. I had to put them in fstab, because they are mp3 players and I need user privelages in order to sync them. With nothing plugged in the usb ports,I checked, and they aren't shown in mtab, and only Sansa-e260 and JOSHS PHONE are shown in fstab, although as far as I know, they shouldn't appear in Places when unmounted. Is there a way to reset it?
View 2 Replies
View Related
Nov 11, 2010
I have installed fedora 13 on my dell inspiron 14 r laptop recently.but no network icon is shown on top right corner.well i tried from system menu list and manually configured it.i have wired connection and tried my best but unable to browse the net.
View 1 Replies
View Related
Apr 1, 2011
I've got a Toshiba Satellite L655D-S5109 and the gnome cpu temp applet only shows 3 cpu's. Its a dual core AMD Turion II - I would have expected 4 cpu in the temp applet.
View 5 Replies
View Related
May 31, 2010
I have a problem when tried to upgrade my fedora 12 to fedora 13...
I run this command :
su -
yum update rpm ---- running success
yum -y update --- running success
After this, my laptop hang so i force to shutdown by pressed power button ! Next problem which is after i boot my laptop, it always shows me, GRUB prompt shell, GRUB > (commands GRUB) !
Code:
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename. ]
grub>
I already run this command :
Code:
grub> find /grub/grub.conf
(hd0,5)
grub> root (hd0,5)
Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... no
Checking if "/grub/stage1" exists... yes
Checking if "/grub/stage2" exists... yes
Checking if "/grub/e2fs_stage1_5" exists... yes
Running "embed /grub/e2fs_stage1_5 (hd0)"... 30 sectors are embedded.
succeeded
Running "install /grub/stage1 (hd0) (hd0)1+30 p (hd0,5)/grub/stage2 /grub/menu
.lst"... succeeded
Done.
But when I reboot, it always shown me GRUB prompt shell.
View 7 Replies
View Related
Mar 24, 2009
I installed FC10 but can not see mouse pointer (it was so also during the installation process). Mouse is working, Crtl shows pointer's position, moving over sensitive areas activates them but no pointer can be seen. The Mouser Property Tool doesn't show the part for selecting pointer themes (as given in Help). FC9 on the same computer worked ok, FC10 on other computers work ok, too.
View 8 Replies
View Related
Mar 10, 2010
I had F11 which was working OK'ish on my laptop and decided to upgrade to F12 when it was available. This was not too successful and I started getting problem with updates to the extent that I could not install any as I got errors which stopped the updates. Bit the bullet and backed up all the data then wiped the disk and started from a clean downloaded DVD of the full F12. Still getting problems running the updates (output below) and trying to install/run VirtualBox is also failing (also below). The build and source mentioned show as broken links, where do I go next?
Update errors -
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
VirtualBox install log error
Error! Your kernel source for kernel 2.6.32.9-70.fc12.i686.PAE cannot be found at
/lib/modules/2.6.32.9-70.fc12.i686.PAE/build or /lib/modules/2.6.32.9-70.fc12.i686.PAE/source.
View 3 Replies
View Related
Jun 18, 2010
I'm having the weirdest thing with F13. I HAD a HP 8430 with docking station and external 22" monitor. Worked well, using the RADEONHD drivers. Now I have a HP 8530p laptop. At startup, as soon as the login would show, the screen (both laptop lid and external display) go black. To resolve, I have to disconnect the DVI connector to be able to see the login screen. After initialization of the laptop display (showing login screen) I can connect the DVI connector again.
When I'm logged in and have the DVI connector connected again, I go to GNOME monitor preferences and see, besides my laptop display, my external display, not once but TWICE. if I enable the wrong one, my screen goes black again. If I enable the right one, my external display works as expected. I made sure that the monitor is connected only ONCE with DVI.
I'm using a freshly installed F13 with the default setup, so RADEONHD is being used. My laptop has the following video device (from lspci): 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3650. The bad thing is I don't know where to go for analysis to get this fixed... any hints?
View 1 Replies
View Related
Jun 12, 2011
I use .htaccess to deny all ip addresses except certain to an internal wiki on a subdomain.
Code:
If access is denied to the homepage users are shown the Fedora test page instead of my own custom 403 error page. When I go to a page - not home - I see a standard 403 error page.
Code:
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.54 (Fedora) Server at wiki.domain.com Port 80. What am I missing here? Seems like my ErrorDocument is not being reached..
View 2 Replies
View Related
Jan 4, 2011
I have just installed Fedora 13, everything seems to work but the Internet connection. 3 devices are shown in the "Network Configuration" window (devices tab)(under "Network Device Control")"Network Cards" (wired) (wireless) and even the Motorola Modem from the ISP as well as all of the primary and secondary "DNS's", but will not connect! I have Broadcom devices on a Dell Latitude D600 Laptop. On the upper right of the desktop, the connection icon shows when I plug and unplug the cat5e, so it sees something there, but will not connect.
View 10 Replies
View Related
