iam working on F14 KDE 64-bit ....i installed Matlab today it was installed successfully with no errors at all but when i try running it from /usr/local/MATLAB/R2010b/bin/glnxa64/ ..... the Matlab logo shows up then disappear again .and with no errors.. i opened the system monitor to see that Matlab is running ..... i searched the web and got that Matlab makes problems with selinux so i turned it off ...and still the same
View 6 RepliesI just reinstalled Ubuntu Lucid Lynx and an old problem has come back. For some reason I couldn't fix it even in my previous installation. The problem is the top gnome panel. See the photo below: As you can see, the network icon is not shown properly while the Me menu is being shown twice. I can't even restart or log out or shut down at this situation without pressing the keystroke to turn the power off.
View 9 Replies View RelatedI need to set up permissions for matlab (at least I think permissions is the problem). I haven't been able to find any conclusive instructions how to set permissions and the advice I see are often confusing or contradictory. I have installed matlab (64-bit version) using root account as that was recommended by the installer and everything seems fine except for the error message I got after installation:
[root@localhost User]# /mnt/dvd/install
The following messages were written to standard error while running 'xsetup' the X Window System version of 'install'.
xsetup: Unable to load required font.
Warning: This program is an suid-root program or is being run by the root user. The full text of the error or warning message cannot be safely formatted in this environment. You may get a more descriptive message by running the program as a non-root user or by removing the suid bit on the executable.
Warning: Cannot convert string "%s" to type %s
Check the content of the installation output file (backend):
/usr/local/lib64/matlab/install_matlab.out
Error messages found:
Warning: Permission Problem With MATLAB Files!
| Checked some files in your MATLAB root directory. These are bad:|
-r--r--r--. (not world readable) - ./toolbox/matlab/general/diary.m .....
Can I set up permissions to make it work afterwards? If so - how? I see the error message talking about the permissions being -r--r--r-- which I guess is only readable to all users. But should I set permissions to folders, executables or both? Was there anything I could have done before installation to make this work? I'm rather new to linux though I feel quite comfortable to work with the terminal. My system is fedora 13.
I found this excellent resource: [URL]. Though I'm still not sure how to set up permissions and I'm a bit hesitant as I don't want to create any security holes in my system. Would it be enough for me to give executable rights for my user to the program files in usr/local/bin? Now that I look at the permissions it seems I already have permission (through others...?) to the mentioned files.
...
-r-xr-xr-x. 1 root root 174426 5 jan 2010 librxtxSerial.so
-r-xr-xr-x. 1 root root 94246 4 jan 2010 libtbbmalloc.so.2
...
want to install Matlab on my fedora 14. tried using "yum" but it says "no package Matlab found". do i have to add some repository.
View 2 Replies View RelatedI currently work at a lab which uses Matlab to do calculations that take weeks. We're having problems monitoring Matlab outside of the lab. Specifically, what we would like would be to have Matlab run on a linux computer in the lab and be able to check up on it every so often. We've tried playing around with X server and are going to try VNC when there's time.
View 2 Replies View Relatedhaving migrated from Ubuntu 10.10 and just installed Matlab 2010b on it It does not run in Fedora but producs the following error :-
Code:
[milli@milli bin]$ ./matlab
expr: error while loading shared libraries: libgmp.so.3: cannot enable executable stack as shared object requires: Permission denied
/usr/local/MATLAB/R2010b/bin/util/oscheck.sh: line 138: [: -eq: unary operator
[Code].....
I tried running this under super user mode by giving su - and going to the directory but still gives the same error is shown . Also I get a SE Linux Security alert about AVC , I have no clue what that means.
Any one use octave while taking a matlab class? I am currently in MATLAB but cant offord the software and there are no trials of it. The studernt edition is still expensive and i need to save money. I have been going in during math class to do matlab homework but i cant keep skipping math since i am a mechanical engineer.
View 14 Replies View RelatedI am very new to linux. I just got the dual boot working a couple of days ago. Now I downloaded MATLAB (2009b) from my university website. It came in a zip file...well I have no clue how to install it. I looked at the instruction manual, it doesn't really explain much.
View 5 Replies View RelatedI wanted to know if matlab and solid works run well on linux and fedora especially.
View 3 Replies View RelatedI am trying to install matlab R2011a student edition in Fedora 15, 64 bits system. This version of matlab do not support 64 bits linux out of the box, but can be installed by adding -glnx86 as an argumenof the installing script.
However after running the installation script I receive the following error message:
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/mathworks_32316/java/jre/glnx86/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
It seems to be a problem with libXext.so.6, however, I do have libXext library installed in my computer. The name of the package I have installed is:
X.Org X11 libXext runtime library
libXext-1.2.0-2.fc15 (x86_64)
I installed MATLAB R2009a in my laptop (Fedora 14 x86-64), the installation was succesful but when I run MATLAB (in a console), appears a message: error while loading shared libraries: libut.so: cannot enable executable stack as shared object requires: Permission denied
I find a "solution", execute in a terminal: execstack -c libut.so
I used several times with differents libraries that I needed, but I run MATLAB in a terminal, MATLAB starts in a terminal, only a prompt ">>" and nothing.
I am using fedora 12 genome. I install open office 3.. by these command:
1- tar xvzf OOo_3.0.0_LinuxIntel_install_xxxxxx.tar.gz
2- su to root
3- cd into the RPMS( where all RPMS package were present)
4- BY RPMS auto installer. I install all package.
There are two folder in my "/opt" folder. openoffice.org and openoffice.org3. But office is not shown in application start menu, but when we check it by add/remove software option this is show that it install.
Login image is not shown in F15.Worked in F14.I have amd64 version of F15.
View 2 Replies View RelatedI have 5 or 6 computers on my home network. Most of them are wired connections, a few wireless. All the Linux machines run Samba and they are all configured identically. Workgroup name is the same on all, user=share on all and they all have a share or 2. I can ping any one from any other but they don't all show up when I run smbtree, usually from my wireless laptop. Maybe I should run it on all the Linux boxes and see what the result is, but I've never done that. My question is, why do they not all show up? One of them never shows in the list. The Windows boxes always do.
View 10 Replies View RelatedI'm trying to upgrade my current fedora 8 box to fedora 10. I downloaded the cd images and burned from the fedora website. After I booted my laptop using the fedora installation cd, the anaconda program started and went immediately to the keyboard selection, language selection, etc. but no upgrade option screen was shown at all until the point that I have to choose my partitions where it was obvious that a fresh installation was being done.
Using crtl+f2 I checked the /tmp/anaconda.log file, whoch has the warning: "step install type does not exist". At this point I do not know exactly what is going on.
There is a thread in this forum that points to this website [URL] as a place for good directions on getting the new Java and the new Firefox to cooperate with one another. I followed it and was unable to get that to happen. To test it I used the official U.S. clock website. Don't quite know what to ask, except what did I do wrong? I following the directions to the letter, but in the "aboutlugins" part, Java doesn't show up.
View 7 Replies View Relatedi just downloaded the newest kde spin from fedora's web site.installed fine, but have noticed that only 3.2 gigs of 4 is being shown on the os.the bios see's 4.this doesn't happen on windoze but it happened on linux mint 64 bit also.why is linux distro's not seeing it?
View 6 Replies View RelatedI need to create this link between the two directories shown below.... So I assume everything that is put into the outgoing directory is copied to
# pwd
/home/e-smith/files/users/admin/home
ls -l
lrwxrwxrwx 1 root root 29 Jun 25 2008 outgoing -> /var/spool/asterisk/outgoing/
I am having difficulty with my brother hl-2040 printer. Linux recognizes the printer and it's set as the default. The job shows up in the printer queue as completed, but nothing comes out of the printer.
View 5 Replies View RelatedI've always been a fan of Fedora since the first distro. I remember downloading 4 cds and then relizing that I only needed one. ;D Anyways, I've been using Ubuntu for years. I've gotten tired of the Ubuntu fan boys and just the responses I get from saying that Ubuntu was my distro. I've moved to Fedora to simply learn and understand the yum system which I already enjoy using in the terminal.
All of that set aside, I've kept my Ubuntu /home partition (ext4) in tact as I always do moving from distro to distro and have never had a problem. The thing is, all the distros I've tried have deb based. Now, my /home partition is roughly 56gbs. Nautilus shows free space as 8gbs currently on my parition so I know the files are still there but why won't Fedora read them? It must be a permission thing, but what? If I must loose my /home it's fine, however I'd much prefer not to.
I did some modification of fstab, and works, but for some strange reason, there are drives shown in the Places menu that shouldn't be there when the drives (they are usb drives) are unplugged. I had to put them in fstab, because they are mp3 players and I need user privelages in order to sync them. With nothing plugged in the usb ports,I checked, and they aren't shown in mtab, and only Sansa-e260 and JOSHS PHONE are shown in fstab, although as far as I know, they shouldn't appear in Places when unmounted. Is there a way to reset it?
View 2 Replies View RelatedI have installed fedora 13 on my dell inspiron 14 r laptop recently.but no network icon is shown on top right corner.well i tried from system menu list and manually configured it.i have wired connection and tried my best but unable to browse the net.
View 1 Replies View RelatedI've got a Toshiba Satellite L655D-S5109 and the gnome cpu temp applet only shows 3 cpu's. Its a dual core AMD Turion II - I would have expected 4 cpu in the temp applet.
View 5 Replies View RelatedI have a problem when tried to upgrade my fedora 12 to fedora 13...
I run this command :
su -
yum update rpm ---- running success
yum -y update --- running success
After this, my laptop hang so i force to shutdown by pressed power button ! Next problem which is after i boot my laptop, it always shows me, GRUB prompt shell, GRUB > (commands GRUB) !
Code:
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename. ]
grub>
I already run this command :
Code:
grub> find /grub/grub.conf
(hd0,5)
grub> root (hd0,5)
Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... no
Checking if "/grub/stage1" exists... yes
Checking if "/grub/stage2" exists... yes
Checking if "/grub/e2fs_stage1_5" exists... yes
Running "embed /grub/e2fs_stage1_5 (hd0)"... 30 sectors are embedded.
succeeded
Running "install /grub/stage1 (hd0) (hd0)1+30 p (hd0,5)/grub/stage2 /grub/menu
.lst"... succeeded
Done.
But when I reboot, it always shown me GRUB prompt shell.
I installed FC10 but can not see mouse pointer (it was so also during the installation process). Mouse is working, Crtl shows pointer's position, moving over sensitive areas activates them but no pointer can be seen. The Mouser Property Tool doesn't show the part for selecting pointer themes (as given in Help). FC9 on the same computer worked ok, FC10 on other computers work ok, too.
View 8 Replies View RelatedI had F11 which was working OK'ish on my laptop and decided to upgrade to F12 when it was available. This was not too successful and I started getting problem with updates to the extent that I could not install any as I got errors which stopped the updates. Bit the bullet and backed up all the data then wiped the disk and started from a clean downloaded DVD of the full F12. Still getting problems running the updates (output below) and trying to install/run VirtualBox is also failing (also below). The build and source mentioned show as broken links, where do I go next?
Update errors -
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
VirtualBox install log error
Error! Your kernel source for kernel 2.6.32.9-70.fc12.i686.PAE cannot be found at
/lib/modules/2.6.32.9-70.fc12.i686.PAE/build or /lib/modules/2.6.32.9-70.fc12.i686.PAE/source.
I'm having the weirdest thing with F13. I HAD a HP 8430 with docking station and external 22" monitor. Worked well, using the RADEONHD drivers. Now I have a HP 8530p laptop. At startup, as soon as the login would show, the screen (both laptop lid and external display) go black. To resolve, I have to disconnect the DVI connector to be able to see the login screen. After initialization of the laptop display (showing login screen) I can connect the DVI connector again.
When I'm logged in and have the DVI connector connected again, I go to GNOME monitor preferences and see, besides my laptop display, my external display, not once but TWICE. if I enable the wrong one, my screen goes black again. If I enable the right one, my external display works as expected. I made sure that the monitor is connected only ONCE with DVI.
I'm using a freshly installed F13 with the default setup, so RADEONHD is being used. My laptop has the following video device (from lspci): 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3650. The bad thing is I don't know where to go for analysis to get this fixed... any hints?
I use .htaccess to deny all ip addresses except certain to an internal wiki on a subdomain.
Code:
If access is denied to the homepage users are shown the Fedora test page instead of my own custom 403 error page. When I go to a page - not home - I see a standard 403 error page.
Code:
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.54 (Fedora) Server at wiki.domain.com Port 80. What am I missing here? Seems like my ErrorDocument is not being reached..
I have just installed Fedora 13, everything seems to work but the Internet connection. 3 devices are shown in the "Network Configuration" window (devices tab)(under "Network Device Control")"Network Cards" (wired) (wireless) and even the Motorola Modem from the ISP as well as all of the primary and secondary "DNS's", but will not connect! I have Broadcom devices on a Dell Latitude D600 Laptop. On the upper right of the desktop, the connection icon shows when I plug and unplug the cat5e, so it sees something there, but will not connect.
View 10 Replies View RelatedI have been trying to install MATLAB 2008b as a standalone version; however, every time when the process runs to 18% it shows an error as follows: "There was an error extracting the archives for MATLAB compiler. Chceck that you have enough disk space and rerun the installer."
I did have checked the disk space which is much more than enough. I have also changed few different disks that are way more than enough as well, about 5GB at least, but this error still popped out when it runs to 18%.