i just downloaded the newest kde spin from fedora's web site.installed fine, but have noticed that only 3.2 gigs of 4 is being shown on the os.the bios see's 4.this doesn't happen on windoze but it happened on linux mint 64 bit also.why is linux distro's not seeing it?
View 6 Replieshow come shared memory is only using 4 gigs of ram?
Code:
localhost router # free -m
total used free shared buffers cached
Mem: 8001 858 7142 0 130 235
-/+ buffers/cache: 492 7508
[code]...
On a new box with Debian Lenny, I have 2x2 gig of ddr2 but the karamba applet show only 3291mb. And dmesg show this:
Code:
dmesg | grep Memory
[0.004000] Memory: 3362976k/4194304k available (1769k kernel code, 43092k reserved, 752k data, 244k init, 2489792k highmem)
I just reinstalled Ubuntu Lucid Lynx and an old problem has come back. For some reason I couldn't fix it even in my previous installation. The problem is the top gnome panel. See the photo below: As you can see, the network icon is not shown properly while the Me menu is being shown twice. I can't even restart or log out or shut down at this situation without pressing the keystroke to turn the power off.
View 9 Replies View RelatedFedora 14 xfce
HP Mini 210
I am looking to buy some memory for my netbook. Currently I have 1 GB of DDR3 memory. However, the specification says that 2 GB of memory is the max. However, when I do the following it says that 4GB is the max:
[Code].....
Code:
I am about at the end of my patience with this. I have ran BUM and removed everything apart from the bare essentials stop most programs from starting with Startup Applications and just did a pretty violent clean up of programs I don't use.
I removed preload as I had that installed to see if that was the problem, but that made no difference at all.
I already know about the xorg problem but this should not affect me as I am running the property ATI driver.
This wouldn't be too much of a problem if it just sat at about 2 gigs when idle, but it doesn't. After about 3-4 hours of it being on it's using all my memory and the PC is unusable.
i doubt theres a fix for this as wine is emulating windows but is there any possible way to speed up wine a bit? I do need some windows programs to work properly but there soooo laggy. my system is a msi slim pc with 2 gigs ram and 500 g hd so i dont see why it would be running slow or is that just how wine is?
View 1 Replies View Relatedhow can I format my Creative Zen Vision M and use it then as an external drive? I dont want to use it as an MP3 and as a hard drive, i want to remove everything from it and use its 30 gigs.I'd rather format it into fat32, but could also deal with ext3
View 5 Replies View RelatedI have a dvd that is 5 gigs and I want to put it on a dvd that is about 4.4 Gigs. Anyone have an idea of software that will reduce the size of one dvd so I can put it on a dvd of smaller size. My dvds at my house are always getting manged and destroyed so I want to burn a dvd that will take the fall and make another copy of the one I do have. I will never redistribute any burned dvds. I saw a recent supreme court ruling that deemed this and using libdvdcss legal. This really gets me going. When I have a file I want to burn thats 50 Megs bigger than than 4.4gigs on debian systems so it tells me to put in bigger storage, whatever.
View 12 Replies View Related10.4 install on ibm g40 failure. I'm trying to install U 10.4 on an IBM Laptop g40 with .75 gigs of ram with no luck. Workstation CD I use f6 and remove splash- from other options. When I select install option the screen goes black after moving through the Ubuntu dots then the screen goes blank.
View 7 Replies View RelatedLike the title says, I uninstalled wubi 10.04 last night and I noticed that my computer was running extremely slowly. I checked the amount of RAM and it said I only had 1 GIG which is definitely wrong. I have 3 GIGs. how I can recover that lost memory? I've tried searching google and haven't really found anything promising..
Also: I'm running windows 7 32-bit on a Sony VGN-CS190.
I'v downloaded the new versions of suse many times. I average 3 to 4+ times before it's successful, bad downloads(bad checksum) or download stops for no reason. I'v used direct link and bittorrent. Bittorrent takes 2-3 times as long. So, I usually use direct link. I can do the download in about 6-8 hours. The first time, it stopped at 334 megs, using direct link. Using bittorrent, it took about 16 hours. I got a bad checksum. Is there a way I fix the file without downloading it again? Suse 10.4
View 9 Replies View RelatedI have a UUID file that has grown to 8.4 gigs... and I don't know what to do. Its sucking up all the free space in the partition. I guess I will have to delete the file but I don't know how to do it properly.I suspect this is a backup of all the data I have been moving around between drives recently.
View 2 Replies View Relatedno disk detected when installing debian 5 on a msi P55-GD80 mother board 8 gigs Kinsgton Ram and 2 x seagate barracuda 500 gigs 9BD648-552, I get a list of drivers to choose from but dont know wich to choos
View 3 Replies View RelatedI am using fedora 12 genome. I install open office 3.. by these command:
1- tar xvzf OOo_3.0.0_LinuxIntel_install_xxxxxx.tar.gz
2- su to root
3- cd into the RPMS( where all RPMS package were present)
4- BY RPMS auto installer. I install all package.
There are two folder in my "/opt" folder. openoffice.org and openoffice.org3. But office is not shown in application start menu, but when we check it by add/remove software option this is show that it install.
iam working on F14 KDE 64-bit ....i installed Matlab today it was installed successfully with no errors at all but when i try running it from /usr/local/MATLAB/R2010b/bin/glnxa64/ ..... the Matlab logo shows up then disappear again .and with no errors.. i opened the system monitor to see that Matlab is running ..... i searched the web and got that Matlab makes problems with selinux so i turned it off ...and still the same
View 6 Replies View RelatedLogin image is not shown in F15.Worked in F14.I have amd64 version of F15.
View 2 Replies View RelatedI have 5 or 6 computers on my home network. Most of them are wired connections, a few wireless. All the Linux machines run Samba and they are all configured identically. Workgroup name is the same on all, user=share on all and they all have a share or 2. I can ping any one from any other but they don't all show up when I run smbtree, usually from my wireless laptop. Maybe I should run it on all the Linux boxes and see what the result is, but I've never done that. My question is, why do they not all show up? One of them never shows in the list. The Windows boxes always do.
View 10 Replies View RelatedI'm trying to upgrade my current fedora 8 box to fedora 10. I downloaded the cd images and burned from the fedora website. After I booted my laptop using the fedora installation cd, the anaconda program started and went immediately to the keyboard selection, language selection, etc. but no upgrade option screen was shown at all until the point that I have to choose my partitions where it was obvious that a fresh installation was being done.
Using crtl+f2 I checked the /tmp/anaconda.log file, whoch has the warning: "step install type does not exist". At this point I do not know exactly what is going on.
There is a thread in this forum that points to this website [URL] as a place for good directions on getting the new Java and the new Firefox to cooperate with one another. I followed it and was unable to get that to happen. To test it I used the official U.S. clock website. Don't quite know what to ask, except what did I do wrong? I following the directions to the letter, but in the "aboutlugins" part, Java doesn't show up.
View 7 Replies View RelatedI need to create this link between the two directories shown below.... So I assume everything that is put into the outgoing directory is copied to
# pwd
/home/e-smith/files/users/admin/home
ls -l
lrwxrwxrwx 1 root root 29 Jun 25 2008 outgoing -> /var/spool/asterisk/outgoing/
I am having difficulty with my brother hl-2040 printer. Linux recognizes the printer and it's set as the default. The job shows up in the printer queue as completed, but nothing comes out of the printer.
View 5 Replies View RelatedI've always been a fan of Fedora since the first distro. I remember downloading 4 cds and then relizing that I only needed one. ;D Anyways, I've been using Ubuntu for years. I've gotten tired of the Ubuntu fan boys and just the responses I get from saying that Ubuntu was my distro. I've moved to Fedora to simply learn and understand the yum system which I already enjoy using in the terminal.
All of that set aside, I've kept my Ubuntu /home partition (ext4) in tact as I always do moving from distro to distro and have never had a problem. The thing is, all the distros I've tried have deb based. Now, my /home partition is roughly 56gbs. Nautilus shows free space as 8gbs currently on my parition so I know the files are still there but why won't Fedora read them? It must be a permission thing, but what? If I must loose my /home it's fine, however I'd much prefer not to.
I did some modification of fstab, and works, but for some strange reason, there are drives shown in the Places menu that shouldn't be there when the drives (they are usb drives) are unplugged. I had to put them in fstab, because they are mp3 players and I need user privelages in order to sync them. With nothing plugged in the usb ports,I checked, and they aren't shown in mtab, and only Sansa-e260 and JOSHS PHONE are shown in fstab, although as far as I know, they shouldn't appear in Places when unmounted. Is there a way to reset it?
View 2 Replies View RelatedI have installed fedora 13 on my dell inspiron 14 r laptop recently.but no network icon is shown on top right corner.well i tried from system menu list and manually configured it.i have wired connection and tried my best but unable to browse the net.
View 1 Replies View RelatedI've got a Toshiba Satellite L655D-S5109 and the gnome cpu temp applet only shows 3 cpu's. Its a dual core AMD Turion II - I would have expected 4 cpu in the temp applet.
View 5 Replies View RelatedI have a problem when tried to upgrade my fedora 12 to fedora 13...
I run this command :
su -
yum update rpm ---- running success
yum -y update --- running success
After this, my laptop hang so i force to shutdown by pressed power button ! Next problem which is after i boot my laptop, it always shows me, GRUB prompt shell, GRUB > (commands GRUB) !
Code:
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename. ]
grub>
I already run this command :
Code:
grub> find /grub/grub.conf
(hd0,5)
grub> root (hd0,5)
Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... no
Checking if "/grub/stage1" exists... yes
Checking if "/grub/stage2" exists... yes
Checking if "/grub/e2fs_stage1_5" exists... yes
Running "embed /grub/e2fs_stage1_5 (hd0)"... 30 sectors are embedded.
succeeded
Running "install /grub/stage1 (hd0) (hd0)1+30 p (hd0,5)/grub/stage2 /grub/menu
.lst"... succeeded
Done.
But when I reboot, it always shown me GRUB prompt shell.
I installed FC10 but can not see mouse pointer (it was so also during the installation process). Mouse is working, Crtl shows pointer's position, moving over sensitive areas activates them but no pointer can be seen. The Mouser Property Tool doesn't show the part for selecting pointer themes (as given in Help). FC9 on the same computer worked ok, FC10 on other computers work ok, too.
View 8 Replies View RelatedI had F11 which was working OK'ish on my laptop and decided to upgrade to F12 when it was available. This was not too successful and I started getting problem with updates to the extent that I could not install any as I got errors which stopped the updates. Bit the bullet and backed up all the data then wiped the disk and started from a clean downloaded DVD of the full F12. Still getting problems running the updates (output below) and trying to install/run VirtualBox is also failing (also below). The build and source mentioned show as broken links, where do I go next?
Update errors -
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
VirtualBox install log error
Error! Your kernel source for kernel 2.6.32.9-70.fc12.i686.PAE cannot be found at
/lib/modules/2.6.32.9-70.fc12.i686.PAE/build or /lib/modules/2.6.32.9-70.fc12.i686.PAE/source.
I'm having the weirdest thing with F13. I HAD a HP 8430 with docking station and external 22" monitor. Worked well, using the RADEONHD drivers. Now I have a HP 8530p laptop. At startup, as soon as the login would show, the screen (both laptop lid and external display) go black. To resolve, I have to disconnect the DVI connector to be able to see the login screen. After initialization of the laptop display (showing login screen) I can connect the DVI connector again.
When I'm logged in and have the DVI connector connected again, I go to GNOME monitor preferences and see, besides my laptop display, my external display, not once but TWICE. if I enable the wrong one, my screen goes black again. If I enable the right one, my external display works as expected. I made sure that the monitor is connected only ONCE with DVI.
I'm using a freshly installed F13 with the default setup, so RADEONHD is being used. My laptop has the following video device (from lspci): 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3650. The bad thing is I don't know where to go for analysis to get this fixed... any hints?