I have installed fedora 13 on my dell inspiron 14 r laptop recently.but no network icon is shown on top right corner.well i tried from system menu list and manually configured it.i have wired connection and tried my best but unable to browse the net.
View 1 RepliesThis is a small screen shot of my problem: I've changed the default icon for eclipse but this problem existed before I've done that. I'm using AWN Dock. How I can get rid of it?
View 9 Replies View RelatedAfter a recent dist-upgrade I have lost my network.There is no Network manager icon in the top corner.My switch and the RJ45 port on the PC are both lit green and connected. There is an internet connection from the other PC on the LAN.I am now able to ping the other PC on the LAN but still no internet!My router is at 192.168.0.1 so I have also tried:sudo route add default gw 192.168.0.1.
View 1 Replies View RelatedI just reinstalled Ubuntu Lucid Lynx and an old problem has come back. For some reason I couldn't fix it even in my previous installation. The problem is the top gnome panel. See the photo below: As you can see, the network icon is not shown properly while the Me menu is being shown twice. I can't even restart or log out or shut down at this situation without pressing the keystroke to turn the power off.
View 9 Replies View RelatedFC13, Gnome.The network icon seems to have gone away.How to get it back up there?I used to be able to click on it, then select the desired interface.
View 2 Replies View Relatedjust installed Fedora 15 on my laptop Samsung RF511Everything works perfectly fine but It seems that I cannot connect to the internet.When I clicked Network icon on the right top corner of the screen, only two option came out:Wired - cable unpluggedNetwork setting.How do I solve this problem. Since the laptop is not connected to the internet, I cannot use command yum.P.S. Samsung RF511 using Broadcom.
Another question, My laptop has two graphic cards. Intel and Nvidia Optimus.Can Fedora 15 use the Nvidia card?Please tell me step by step or send me a link tutorial for beginner to setup my internet since I am very new at linux.
Code:
[root@localhost kostia]# lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
[Code].....
1. It shows root@localhost kostia, but during the installation of Fedora 13 DVD x86 I renamed localhost.localdomain into baikal as my laptop name. Very strange error. On static PC I used amour name and it works without localhost.
2. Above you can see my list of initial cards. I wish to know where is it my ethernet card? The bug #2 is that after Fedora was installed, I can't see any connections in my Network Manager. So I created Wired one myself. After that I still can't see the icon in the top-right corner to restart the connection as usually we may do that. So, what is wrong? How to make my laptop going to the Internet.
I a trying to setup a wired connection in my ubuntu machine 8.04. but could not able to connect to internet, the internet status icon in status bar is always disabled irrespective of whether I connect the cable or not.
View 9 Replies View Relatedeverything was excellent till yesterday evening but from the evening, when i switched on my pc, the Network Connections icon is missing from the panel of my fedora 12 os. i'm being able to connect to internet from Systems->Preferences->Network connections & check Connect Automatically to my Mobile broadband connection. but i'm not being able to disconnect it. i've to remove the mobile phone from my pc.please put some light on how will I be able to disconnect it (without removing the phone)?
View 2 Replies View RelatedI have assigned ip address to laptop by editing /etc/network.interfaces. From next reboot the Network Manager Applet which was present on right hand upper corner, disappeared. I wonder why? This has happened with 9.04, 9.10 and now in 10.04. Another question is, are Network Manager settings (ip) and /etc/network/interfaces do correspond to same thing or not? As I have narrated above, since network manager applet is no more visible how to see the physical network cable connectivity status (as we do in windows xp)? (is there any other app of such kind or what?)
View 2 Replies View RelatedIve been using fedora 11 fora few months now and suddenly today after I booted up fedora network authentication(the little icon that lets me choose wifi networks) isnt showing up in the upper right hand corner which isnt that big of a problem but the fact that its on start up applications and its not wondering is what Im wondering about but on top of that my internet doesnt work at all.It will work for a little bit after boot then die and when I go to network authentication and network manager no wifi networks show up and I have about 5 around my house not including my own which is also what ive been wondering.
View 7 Replies View Relatedthis is a brand new installation of 10.04 on a desktop. it's a dual boot with XP and the connection works on that side.i'm thrown off balance by the complexity of the situation... at least it is to me . i am able to see my wireless connection (along with my neighbor's). i enter the WPA password when prompted and for the next 5 minutes, it tries to connect with no success at the end.
Code:
francis@gandhi:~$ sudo lshw -c network
*-network:0
[code]...
How do you remove the power icon in the top right hand corner? So that it's no longer displayed.
View 1 Replies View RelatedI recently installed fedora 15 on my computer but I have a huge problem. I can connect to my router wirelessly for a couple of minutes only. Afterwards my computer has no Internet connection although the network manager and the icon on the upper bar says that i am still connected. I tried editing the /etc/rc.local and /etc/resolv.conf as mentioned in other posts in here bit no luck so far.
View 6 Replies View Relatednotice that the shutdown icon is not really round(on the upper right corner)? Have they fixed this one yet?
View 4 Replies View RelatedI have installed Mint8. I was using VPN connection before to be able to use skype (it's blocked in the Middle East...) but can't get it to work in Linux I've installed the network manager, added and configured the VPN connection but when I click on it to connect it doesn;t do anything. No window popping up, no error message... anyone has got an idea what else I should do in order making it work? or how else can I use skype without logging into private networks?
another "problem" we have got 2users on Linux and the other one cannot see the wifi icon in the bottom right corner on his desktop. after nm applet (or some command like that ) i got back that its been taken by another user. so can only one user see this icon on his desktop??
Okay currently I am using a a Belkin F6D4050v1 usb wireless n card on a 32 bit intall of ubuntu 9.10. I have already installed ndiswrapper and installed the the rt2870.inf driver and rebooted. But i still have no wireless. when I use the command "sudo lshw -C network" all i see is my pci wired nic card"lsusb" the ID of the card is "050d:935a Belkin Components""sudo iwconfig" sayslo no wireless extensionsetho no wireless extensions
View 2 Replies View RelatedI recently upgraded from Ubuntu 9.10 to 10.04 (both 64-bit) and my USB WiFi adapter which previously worked fine stopped working. The adapter is a Hama USB stick based on the Ralink rt73 chipset. I've tried using the Ralink drivers that come with 10.04 (both rt2800usb and rt73usb) but neither work. When I use rt2800usb, the adapter is recognized as interface wlan0, however I can't see any wireless networks. When I use rt73usb (and blacklist rt2800usb to avoid conflicts) I no longer have a wlan0 interface and there is no wireless adapter shown in the network manager. I've pasted in the results of lsmod, lsusb, and ifconfig -a (with MAC addresses removed) below.
[Code]....
I have installed CentOS. I have two ethernet card (one onboard and one PCI). I am able to set ip for realtek ethernet card and my atheros(on board) is not shown in network ifconfig shows only one ethernet card (PCI) hen i gave the command lspci i got the following output
01:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
03:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
3 computers in the house run various windows based programs and everything is fine with them connecting to the internet as far as putting in the security password to log in and get online.My old back up computer that I use in the basement that has Ubuntu 9.10 was working fine with the secured network situation up until today.I booted up the computer this morning and it automatically connected as it typically does and I was reading some email and then the computer froze, which on rare occasions it does.
Upon reboot I got a window that asked for the password for the Network Manager Applet which I supplied and then it asked for the password for the secured internet connection which I supplied.It would not connect. After numerous tries of disabling the wireless and enabling the wireless and entering the Network Manager Applet password and the secured internet password I still get no connection.
I notice that when it is trying to connect, the window comes up on the screen that shows that there is reception from the modem, but there is also a little "lock" icon like I'm locked out of the connection.I finally found a way to get rid of the Network Manager Applet password problem but that still didn't alleviate the connection problem.
I am having the problem enabling Bluetooth on my Dell studio 1555.
When I start System->Preference-Bluetooth Manager, I get message Connection to Bluez failed :
Bluez daemon is not running, blueman-manager cannot continue.
Some information :
uname -a
Linux T-D 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 x86_64 GNU/Linux"
hcitool dev
Devices:
hci0 00:22:5F:97:20:A0"
dmesg | grep 'Bluetooth' .....
rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
I have reinstalled, removed rebooted and installed bluez, bluez-utils, Blueman, bluetooth number of times now. Two attachments are included,
BlueZ output screen
Bluetooth output screen
Bluetooth works perfect, when I boot lucid using live CD, So I guess there is some problem with the installation. I upgraded from 9.10 to 10.4. It never worked with 9.10 and its continuing the same way.
After a restart, I see bluetooth icon, but its grey all the time. Two more screen shots..
Bluetooth output screen (Turn on)
Bluetooth output screen (Turned on)
sudo /etc/init.d/bluetooth status
* bluetooth is running
What does it mean if you boot from a live CD, the CD spins, a screen appears with the keyboard and human icons at the bottom, then a blank screen appears with a blinking cursor in the upper left corner - and that's it? It just stays that way.
I've tried two different discs, one 10.04 and one 10.10; and two different disc drives.
I have 5 or 6 computers on my home network. Most of them are wired connections, a few wireless. All the Linux machines run Samba and they are all configured identically. Workgroup name is the same on all, user=share on all and they all have a share or 2. I can ping any one from any other but they don't all show up when I run smbtree, usually from my wireless laptop. Maybe I should run it on all the Linux boxes and see what the result is, but I've never done that. My question is, why do they not all show up? One of them never shows in the list. The Windows boxes always do.
View 10 Replies View RelatedI have just installed Fedora 13, everything seems to work but the Internet connection. 3 devices are shown in the "Network Configuration" window (devices tab)(under "Network Device Control")"Network Cards" (wired) (wireless) and even the Motorola Modem from the ISP as well as all of the primary and secondary "DNS's", but will not connect! I have Broadcom devices on a Dell Latitude D600 Laptop. On the upper right of the desktop, the connection icon shows when I plug and unplug the cat5e, so it sees something there, but will not connect.
View 10 Replies View RelatedI was browsing the net very well and without any issues for the past 15 days since I installed FC14. Fantastic experience and then suddenly yesterday after nearly 2 hours of a smooth online session I lost internet connectiivity.At that point I noticed that the network icon on top was showing a red cross. After clicking on it I could NOT eth0. I specifically remember seeing it there before.I checked the cables and the setting to no avail and just could not get it back. Any idea what I should be doing to see eth0 in the connection?Also FYI I have been noticing this from day one since I installed FC14----When going through administration-->network-->One cannot see the red and GREEN activate button that I am used to seeing in FC9. In fc14 its greyed out. So I actually had to go and enter the /etc/init.d/network start command to change the status from inactivate to activate.Also the network manager does not seem to be managing eth01 as it does not appear as an entry in its console.
View 1 Replies View RelatedI'm a complete beginner who just installed 10.04. I'm trying to follow guides to setup my internet connection, but I am completely unable to locate the Network Manager Icon. I have the notification area already, but there is no icon. I tried the instructions here
After inputting
nm-applet --sm-disable
It gave me:
** (nm-applet:1722): WARNING **: <WARN> constructor(): Couldn't initialize the D-Bus manager.
i'm try to find what i can do to reactivate the network icon (where i can select the wifi network i want to connect), which are usualy on the 'tableau de bord'
View 2 Replies View RelatedI have been using ubuntu 10.04 LTS for the last 5 months, used tata photon plus for networking. Everything went fine when couple of days ago, after doing normal updates as listed by the update manager, sound went off.. to solve this, I had to remove and reinstall certain packages as listed in [URL] ...+documentation, I had to restart, after restarting, the sound problem was gone but the network manager icon went off, the modem was not getting power from the computer though the LAN wire was connected. To add to dismay, the mobile broadband connections that I had added to the network manager were gone. I tried adding the tata photon plus (huwaein) again but could not be added, reinstalled usb-mode switch data and related packages, but still the computer does not detect the photon as usb device. I have broadband dsl connection and tata photon plus too but cant use any of them.
View 3 Replies View RelatedWhen the laptop boots I get a very brief message to say "wireless network available, click on icon". But it disappears in a second. I'm not clear whether my WL-140 card is in device wlan0 or wmaster0. Here's what lshw -C network says...
*-network
description: Wireless interface
product: ISL3886 [Prism Javelin/Prism Xbow]
vendor: Intersil Corporation
physical id: 2
bus info: pci@0000:06:00.0
logical name: wmaster0
version: 01
serial: 00:0c:f6:14:a4:35
width: 32 bits
clock: 33MHz .....
Got rid of the network icon on task bar, how can I get it back?
View 2 Replies View Related