I am having difficulty with my brother hl-2040 printer. Linux recognizes the printer and it's set as the default. The job shows up in the printer queue as completed, but nothing comes out of the printer.
View 5 RepliesI believe I have installed my Brother HL 2040 printer on my Fedora 11 64 bit system. However, every time I click printer the printer goes through its warm up procedure but it does not print anything. There is paper in the tray and I know it was working when I was running Fedora 10. It is shown under the Printers heading under Administration.
View 4 Replies View RelatedI tried to print something today with my Brother HL-2040 series printer, and it seems like there are no drivers for that particular model. Is there a source I haven't thought of, or are there really no drivers?
View 5 Replies View RelatedIn the past when I had Slackware 12 with brother HL-2040 printer drivers installed, the printer was working fine. Then I upgraded to slackware 13, but I had too many problems with it so I downgraded back to 12 and reinstalled everything related to slackware 12. Now I can't get the printer to work properly. I installed both the LPR and the CUPS drivers (in RPM packages) provided by brother for linux. I find that now every time I try to print something (even graphics) in KDE 3.5 (for slackware 12), the printer prints excessive pages where the first page starts with something like this:
%!PS-Adobe-3.0
%%LanguageLevel: 1
Are there any special settings that I am unaware of that I should be changing in order for the proper printout to appear? Is there something special that I have to install that I wasn't previously told about?
I know for a fact manual duplex is supported by my printer since in windows it is able to do so unproblematically. After downloading official driver from Brother, printer works but File > Print > Page Setup > Layout > Two-sided > "NOT AVAILABLE" (option greyed out). I need the prompts to come up to tell me when to flip the pages and visually illustrate what needs to be done. This prompt and automatic behaviour by the printer is available in Windows. (Do not recommend to me Gnome Manual Duplex. It's a poor substitute for manual duplexing and doesn't even do what it claims to do.) How to get two-sided printing enabled?
View 6 Replies View RelatedI cannot modify my printer in Cups. In the past when I wanted to add a printer, or modify an installed printer, I clicked on the Admin tab, and I get a prompt to enter a password. I never get the prompt to enter user - root and the root password. So I can not add a printer, or modify one that is installed. My Brother HL-2040 is still working, I can print jobs O.K. it will not print test page. Why do I care? I want to have a better understanding of the location on the lpr and cupswrapper drivers on this system.
I have installed Slackware 13.1 on a second drive, and am trying to convert to that system. In 13.1 cups asks me for Admin user and password, I can enter root + password, and add a printer, and Mandy used to. However, in 13.1 after converting the .rpm files to .tgz files and installing them with pkgtool, I can not 'see' the lpr or cupswrapper driver in 13.1. I wanted to see what it looked like in Mandriva, however I can't and don't know why.
I have openSUSE 11.2 and printer Brother HL-2040 connected to my openSUSE laptop. It was correctly recognized by manufacturer and model and was "automagically" installed by downloading the appropriate driver. Whenever I click "print" its name correctly appears on the page on which you choose where to send the print jobs to. And when I click "print" it prints... empty pages. When I chose to print the test page, 10 empty pages came out.
This printer worked just fine under Ubuntu 9.04 and winXP. I read the topic here about HL-2040 in openSUSE 11.2 using the driver of 2060 but upon checking both the printer config page and CUPS web admin page it was confirmed that the driver is actually the correct required one, HL-2060 Foomatic/Postscript.
I'm trying to get a Brother HL-2040 printer working, without much success. I installed the brother-cups driver, but that didn't work. When I try to print, the printer just shoots out blank pages, and the only way I can stop it is by unplugging the printer. Worked OK on Ubuntu 10.10. I have gnome fallback, if that matters. There's a post saying that I need to download a ppd file, [URL] but when I try to get it, it opens a page instead of downloading a file. Also the information is from 2008, and I don't know how well that will work with all the changes that have been made to Ubuntu and the newer kernel. I got lucky! went to: [URL] and got the .deb files for the lpr driver and the cups driver. Had to use sudo dpkg -i in the terminal, as I couldn't get the software GUI to work. But it prints.
View 1 Replies View RelatedI initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
I just backup my mysql db using mysqldump. I run it around 6pm of the evening but I just notice that on the last part of the dump file, it says "Dump completed on 2010-01-14 11:30:01". The time is "Jan 14 19:30" when I run mysqldump. Though the content is corrent, I still want to know why the dump reported it was completed but wrong time. I don't have my.cnf on my /etc so it means all was default by mysql. If I'm not mistaken, timezone by default in mysql is gmt.
My /etc/sysconfig/clock is
ZONE="Asia/Manila"
UTC=true
ARC=false
When I do "select now();" on mysql shell, it was the same with my system. I want to prove my backup was right but this thing confuse me a bit.
I've recently installed F15 LXDE RC from the livecd and connected my USB Brother All-In-One MFC-5440cn printer. After following the Brother installation page, the Cups & LPR drivers are installed but when I'm in the cups page (http://localhost:631/admin), the printer will not print a test page or print from any application. The LCD panel on the printer does show 'receiving data' but nothing comes out. The last version of Fedora I had running was F13 and the same printer worked fine.
Are there any other printer drivers I need to install besides the Brothers? The printer does show up in the Print Manager but nothing prints. I did have this same type of issue with Mageia Beta 1 and ended up installing a2ps, which wasn't included in the original print drivers, and it is now printing. So I had to install a2ps with F15 but still no print output. Something must have changed with the recent distros causing this. After looking at the output of dmesg I see this:
Code:
WARNING! power/level is deprecated; use power/control instead
[14.867397] udev-configure-printer[587]: add /devices/pci0000:00/0000:00:13.2/usb1/1-3/1-3.2/1-3.2:1.0
[14.867991] udev-configure-printer[587]: parent devpath is /devices/pci0000:00/0000:00:13.2/usb1/1-3/1-3.2
[14.869115] udev-configure-printer[587]: Device vendor/product is 04F9:016D
[14.880470] udev-configure-printer[587]: MFG:Brother MDL:MFC-5440CN SERN:- serial:BROM5F412304
[14.880520] usbcore: registered new interface driver usblp
[15.902920] udev-configure-printer[587]: failed to connect to CUPS server; giving up .....
Any idea why it's failing to connect to Cups or any idea how to find out? Is it possible to have too many USB devices connected? I'm using a 4 port usb hub in use and also using a usb mouse/keyboard connected.
I am unable to get a Brother MFC-5460CN printer to print on a fully updated F12 system. Everything looks normal in Administration | Printing. All fields match the format shown on the Brother site. The printer status is updating correctly so there is communication to the printer. But jobs just queue and eventually show as printed but nothing is actually printed. There are no other printers. Here is the output in /var/log/messages from plugging in the printer and trying to print a document:
Code:
Apr 4 21:23:34 localhost kernel: usb 2-2: new full speed USB device using ohci_hcd and address 4
Apr 4 21:23:34 localhost kernel: usb 2-2: New USB device found, idVendor=04f9, idProduct=01b7
Apr 4 21:23:34 localhost kernel: usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
Apr 4 21:23:34 localhost kernel: usb 2-2: SerialNumber: BROJ6F904373
Apr 4 21:23:34 localhost kernel: usb 2-2: configuration #1 chosen from 1 choice .....
I followed the instructions on the Brother Linux drivers page and all the rpms loaded without error. But the log is showing some type of key problem.
When I try to print something there is only some led blinks on printer and nothing is print. I am using drivers from brother(cupswrapper). I am using CUPS 1.3.11. I didn't have any problems on my previous installation of slackware(but I don't know which driver I've used).
View 11 Replies View RelatedI am using debian Lenny and a Brother MFC-665CW printer. I am trying to print a PDF, but nothing happens. I'm not sure if I've ever printed in Lenny (recently upgraded from Etch). It worked fine in Etch. I "added" the printer again in KDE Print and it spat out a test page, but it does absolutely nothing if I send the document to print.
View 14 Replies View RelatedI just installed openSUSE 11.3 (Gnome GUI). All hardware functions pico bello (Agfa SnapScan e42), card reader ACR038, but ... I can't get my Brother HL-2030 to print.
It is not on the list of Brother printers to be chosen from, so I went to the Brother site in order to get the correct driver, where I can download, after having clicked on the Brother 2030 rpm, a file called cupswrapperHL2040-2.0.1-1.i386.rpm.
So, this is the first thing that surprised me : 2040 instead of 2030 ?
I then tried to install it by right-clicking on the item and then choosing Open with package installer but it returns this error :
nothing provides brhl2040lpr needed by cupswrapperHL2040-2.0.1-1.i386
I remember I had the same problem after installing openSUSE 11.1 but I was able to resolve it rather quickly. So, with openSUSE 11.1 I could print what I wanted.
I am running ubuntu 9.04 and am having trouble printing. My Brother DCP 330c printer is detected however I have to manually chose a printer driver all of which do not work with the printer. I have tried downloading a printer driver from the brother website and tried to install it.
View 2 Replies View RelatedI have just purchased a brand new Brother printer MFC-250C which includes a fax/copier/scanner but mostly its for printing photos however Ubunto 10.4 does not recognize this model! (it works perfectly over on my other partition with windows7 using the setup disk for Brother). I have installed everything related to Brother from Synaptic and searched the Brother web site for any drivers relating to this model and have even tried installing from Synaptic MFC-240C drivers in case they may work (no 250c available in synaptic) selecting PRINT for instance in Fspot my printer receives information for the photo but does not commence printing ..the same applies working in Gimp Gutenprint.
View 1 Replies View RelatedNew 3040CN on 64-bit lucid. Test pages from console work fine. Cannot print using network or USB. Can http to printer on net, and system recognizes printer when USB attached. Downloaded and installed Brother's cups & driver files (despite being labeled as 64bit, they were i386) No 3040CN found in driver selection listings! system-config-printer thinks the driver should be for an Epson Stylus Photo 2200!
Tried various generic and foomatic PCL printers.
Tried attachment to lpd://10.10.10.20/binary_p1 and socket://10.10.10.20:9100. No results with lpd address, jobs are just lost. With socket address, get blank pages. Can't find an lpd file for this printer online.
I'm having trouble printing on my Brother MFC-8640D printer. I've tried both Ubuntu 10.04 and 10.10, neither of which work reliably although a page will occasionally print. I can print just fine from my dual-booted Windows 7 installation. Thunderbird seems to always print OK, OpenOffice writer prints sometimes, other programs don't print at all or are inconsistent.
View 1 Replies View RelatedI am unable to print on my Brother mcf 440cn printer. Every thing was working ok, today I finished some work in Open Office and could not print the saved file. I get an error unable to print msg. my printer is no longer recognized on the system. I reinstalled the driver no luck. I tested the printer with Windooze and every thing works fine
View 4 Replies View RelatedI have been attempting to get my Brother printer to read on my Ubuntu Maverick 64bit system with nothing but failure. I have downloaded all of the appropriate packages and I am now at the point where I am getting the following msg
sudo dpkg -i --force-all --force-architecture mfc6490cwlpr-1.1.2-2.i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
(Reading database ... 176291 files and directories currently installed.)
Preparing to replace mfc6490cwlpr 1.1.2-2 (using mfc6490cwlpr-1.1.2-2.i386.deb) ...
Unpacking replacement mfc6490cwlpr ...
start: Unknown job: lpd
dpkg: warning: subprocess old post-removal script returned error exit status 1
dpkg - trying script from the new package instead ...
start: Unknown job: lpd
dpkg: error processing mfc6490cwlpr-1.1.2-2.i386.deb (--install):
subprocess new post-removal script returned error exit status 1
start: Unknown job: lpd
dpkg: error while cleaning up:
subprocess new post-removal script returned error exit status 1
Errors were encountered while processing: mfc6490cwlpr-1.1.2-2.i386.deb
I have been trying to get 5250DN brother printer to print envelopes correctly and Have tried installing the ppd and a host of other things and still within openoffice on karmic nothing works correctly I have also installed the brother package specifically from the repository via synaptic as well
View 2 Replies View RelatedI just reinstalled Ubuntu Lucid Lynx and an old problem has come back. For some reason I couldn't fix it even in my previous installation. The problem is the top gnome panel. See the photo below: As you can see, the network icon is not shown properly while the Me menu is being shown twice. I can't even restart or log out or shut down at this situation without pressing the keystroke to turn the power off.
View 9 Replies View Relatedthis error happen while installing wine for fedora 15 x86_64 using yum extender, the same problem also happen when installing it using terminal
10:57:02 : ERROR: Dependency resolving completed with errors
10:57:02 : ERROR: Protected multilib versions: 2:libpng-1.2.46-1.fc15.i686 != 2:libpng-1.2.44-3.fc15.x86_64
Have a Brother MFC-9440CN the Scan function of which operated perfectly in Fedora 11. Have upgraded to Fedora 13, now when the Scanner Tool is activated (XSane .997) an error message is returned "Error during CMS conversion. Could Not open scanner ICM profile: (null)". Has anyone had and solved this problem, I have tried everything identified on the Brother web site. The scanner works perfectly when accessed through the Simple Scan application.
View 1 Replies View RelatedJust upgraded from Fedora 13 to 14. My network Brother MFC-9440CN will not operate (worked fine in F13). Error message from both Simple Scan and Scanner Tool (xsane) states "No devices available".
View 14 Replies View RelatedI have a Brother MFC-7345 Printer/Scanner and I got the printer working but the scanner won't work. I've installed all the drivers from Brother and followed all their instructions but still nothing. sane-find-scanner gives me
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
[code]....
and scanimage -L gives me No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). read the documentation which came with this software (README, FAQ, manpages).
I need to direction here: my laptop (F10 gnome) is cat5 dhcp connected to a dlink 524 router with IP 192.168.150.1. This in turn is connected to an arris modem with ip 216... Local IP is 192.168.100.1 (default). It works, connects to internet, supplies dhcp address to dlink. All this is upstairs in my ham room upstairs. My wifes laptop downstairs usually connects wirelessly to the dlink, and hence to the arris. Also works to the internet. There is a linksys (ddwrt software) running as a wireless repeater also located downstair, with box ip 192.168.1.1.
It is "joined" to the dlink router via wireless, hence it function, wireless repeater. It works, I have used it like this many time. However, I cannot seem to get a connection to the Brother printer (which has a print server function). It is connected to the linksys repeater via a lan cable. Gets an ip via dhcp. I think it should work, since my wife can connect to the linksys repeater, either wireless or wired, and surf the internet thru the dlink router via the repeater-dlink wireless repeater link. I must be missing something obscure (to me, at least).
I have a DCP 7030 multifunction printer. I have installed all proprietary drivers from Brother (printer an scanner drivers). [1] Printing works but unfortunately both Simple-scan and X-Sane do not recognize the scanner. Brother provides some scanner settings [2] - but unfortunately not for Fedora 13. I have tried the settings for Fedora 12 but they do not work. [URL]
View 1 Replies View RelatedI am having the oddest issue with the network scanning on my Brother 8080DN. When I click scan (primarily scan to e-mail) from my Brother Control Center on my computer, the scanner works fine. However, when I go to the actual printer/scanner and attempt to scan the printer does not scan, but these error messages come up on my computer:
"Failed to connect to device... MTW005" and "Scanning Failed... CC031"
This is an issue because the scanner (which is networked to several computers) is not in the same room as my computer, so I have to run back and forth between rooms in order to scan multiple documents.
What is puzzling me is that the scanning works when I initiate the scan from the computer (so obviously the scanner is networked to the computer), but not the other way around.
I tried installing updated drivers and reinstalling all Brother software on the computer and neither has worked.