Fedora Networking :: Unable To Use The "fish" In KDE 4.2
Apr 1, 2009
I installed KDE 4.2 ( and from using it I like it very much... switching up from gnome for a while ) and everything but one aspect is working perfectly fine and that is adding network folders... it seems that my install cannot seem to connect to any computer using fish://. Although when I ssh from command line it works fine... I installed the following packages for KDE for reference:
kdeadmin
kdebase
kdebase-workspace
kdenetwork
Also to note I am running fedora 10 and gnome is also installed on the system. The error that I get with fish is that the it cannot connect to server. Even though I can connect with ssh in terminal. Some places I have read about is kio ioslaves and there isn't any problems like I have occurring. From what I gather is that fish works fine for everyone else so I must be doing something wrong but at a loss for what it is...
View 6 Replies
ADVERTISEMENT
Feb 18, 2011
I have been unable to connect between two boxes. One box is using ethernet cable and the other has a wireless nic. I can ping from the box with the wireless card to the wired box, but not the other way around. Using fish:// either way times out. Ssh and vnc services are open in the firewalls. There is no encryption for wireless being used. The wireless card is an imicro wireless pci adapter. I load the wireless driver manually after booting the box (./wlan0up,etc.) Both boxes are using opensuse 11.3. I did not have any problem using fish:// until I replaced a failing ethernet nic with the wireless nic. I use dhcp for the lan ip address
View 12 Replies
View Related
Dec 5, 2010
i am trying to compile the fish shell, in order to install it on my system.when i am run the 'configure' command, i get an error that it can't find 'curses' implementation.i have on my system (Fedora 14) ncurses, which is also supported according to the Fish site.when i try to install curses with yum, i get a message that it couldn't find a package like that.i have tried to google about that but i found nothing
View 3 Replies
View Related
Apr 13, 2010
I've got a strange problem. I have a number of linux boxes - main running Gentoo, a couple of others running Mint and a new one running Kubuntu 9.10.All, except the new one, connect to my hosted remote server through FTP, FISH or SSH without any problem.However the new machine will connect to my remote server, via fish, but then gets immediately disconnected. I have discovered, via my hosting company, that it is flooding the connection and looking in my Router log I can see:Quote:1. 2010.04.13 03:24:42 **SYN Flood to Host** 10.10.xxx.xxx, 38299->> 209.85.xxx.xxx, 80 (from ATM Outbound)If I connect first through SSH on this machine it is fine and I can navigate through the remote filesystem. If I connect through FISH using either Konqueror or Dolphin, I get an initial file listing and then the remote firewall kicks in and blacklists my IP address for half an hour.Does anyone have any ideas why this may be happening? Once I'm blacklisted I cannot make any connection, from any machine on my external IP address - whether it is HTTP, FTP, SSH
View 2 Replies
View Related
May 21, 2010
I use the friendly interactive shell, or fish, as my default shell. I find it much more user-friendly than bash, but lately (as in for the last 2 months, give or take)dding new entries to .config/fish/fish_history and .config/fish/fish_history.tmp. this means when I press up I don't get the last command I typed, but rather the last command from before the bug occurred. I have no idea why this could be and have tried several tricks but none of them have worked. I have made a bug report on launchpad but I was hoping someone here who knows more about shells would know a workaround.The things that I have tried:removing the files to see if it creates a new onemaking sure I have write access to the filesremoving the files and then using touch to create a blank one
View 4 Replies
View Related
Aug 9, 2010
COmpiz does not have the option. if this is a nooby question im new 2 ubuntu
View 1 Replies
View Related
May 9, 2010
using konqueror/dolphin to connect to my desktop and the connection is okay.fish://userone@192.168.1.101:12345 out of curiosity, in konsole typedssh userone@192.168.1.101:12345 and got and error messagessh: Could not resolve hostname 192.168.1.101:12345: Name or service not known Googled and got more confused
View 6 Replies
View Related
Jan 18, 2011
I got a Rocketfish RF-WEB2C webcam, plugged it into my Dell Inspiron Mini 10, and it worked just fine. Cheese ran it, tinychat ran it, skype ran it, all was good. Today, all I get is a black screen. Tinychat claims that it isn't giving out any signal, though can detect it, and Cheese showed me a black screen, though listed it as the the device it was using. I figure it isn't a lack of drivers, as it worked yesterday, and it really shouldn't have broken yet, as I just opened it yesterday.
View 7 Replies
View Related
Sep 10, 2010
This started after my upgrade to 11.3, if I remember correctly. I may have it slightly wrong because I don't drag & drop copy every day, but it's close. Also, it happened to my laptop & desktop both.
I use fish & Krusader to manage some 50-60 servers and it's a dandy app. But now, when I try to copy files to remote servers, I get the following error. I tried it with Konqeror. I tried it with sftp instead of fish. Same results every way.
I've tried searching, but it's not an obvious error message to search for. I'm flummoxed. And sorta frustrated. Linux would be so slick minus these irritating regressions. I had been using WinSCP / Putty, but the Terminal / Krusader I like much better --- except that WinSCP always works.
Here's the screenshot of my error. You can't see it through the blur, but the part that is baffling is that the top line says something like:
this action will overwrite fish://root@server:2222/ with a newer file fish://root@192.168.5.10:2595/.asterisk_history. Notice that the remote server doesn't even HAVE that file on its system.
Selecting Overwriting just freezes Krusader.
View 6 Replies
View Related
Jul 27, 2010
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
View 12 Replies
View Related
Jan 8, 2009
I am using F10 desktop edition, all the computers using windows are able to access the shared folders over lan except me using F10. I have tried many things with smb but still unable to connect.I am new to linux so i dont khow much of its technicalities.kindly suggest how can i be able to access the shared documents ..
View 1 Replies
View Related
Aug 17, 2009
Linux OS : Fedora 10 (No graphical mode)Windows OS : XP and Windows Server NT...I am able to access from my windows to linux using following step//fedora10 ip username of admin and password...I am able to view the admin and shared printer of fedora 10.When i try to enter in the admin folder i am not able to access it. It is giving error "Access is denied".
View 6 Replies
View Related
Jul 7, 2011
I am trying to make my fedora 15 my gateway instead of my old D-Link, but I can't seem to get it working.
View 5 Replies
View Related
Mar 11, 2009
I am having trouble getting F9 to connect to the internet via Firefox. I can can get to the internet via ping ( both ip address and www.whatever.com) so it appears that DNS is working. But YUM is not working-error 110 connection timed out.I have disabled the firewall and SElinux.I had a similar problem when I was loading F10 and Scott pointed me at a fix that requires me to get the dnsmasq update but with yum not working I am at a standstill.
View 5 Replies
View Related
Dec 16, 2009
I'm facing a problem with 'ssh'. In my lan environment i've configured a system with fc12 and one more system with fc9. When i'm trying to login through ssh from fc9 to fc12 it's working, but at the same time if i'm trying to login through ssh from fc12 to fc9 it's not working. I was getting the error "connection closed by remote host"can any one suggest me how to recover this.
View 10 Replies
View Related
Nov 24, 2010
I am not able to install anything but stuff from fedora repositories. Let me show you:
Code:
[Vitaliy@localhost ~]$ su -c 'yum install gnome-commander'
Password:
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
[Code].....
View 1 Replies
View Related
Dec 7, 2010
I have a acer aspire. I recently dual booted with xp and fedora14. we have wifi in the campus and the problem is : I am able to connect to wifi & browse in xp but on the other hand with fedora I am able to connect and the signal is also pretty strong, but I am not able to browse.I am using a firefox mozilla, we also have a proxy for which I have configured all the setttings.The error being displayed is "connection time out".
View 1 Replies
View Related
Apr 30, 2011
I'm trying to connect via ssh from a remote to a local machine.The local machine is connect to the ISP thru a wireless router. I know the ip address of the local machine from myaddress.com. The local machine is running sshd. I can ssh from the local machine to the remote, but I'm unable to ssh from the remote to the local. I know the local machine has not yet changed its port number.
View 3 Replies
View Related
Feb 4, 2009
I have installed Fedora 10 on my Intel system. I am not able to connect to internet from it. Mine is a broadband connection with ADSL+2 modem. I could connect once but afterwards it was deactivated and I got following bug report.
Component: system-config-network
Version: 1.5.93
Summary: TBd036c2a6 re.py:237:_compile:TypeError: first argument must be string or compiled pattern
Traceback (most recent call last):
File "/usr/share/system-config-network/netconfpkg/gui/tonline.py", line 79, in on_generic_entry_insert_text
if re.match(str, text):
File "/usr/lib/python2.5/re.py", line 137, in match
[Code]...
View 2 Replies
View Related
Feb 13, 2009
From today, I am unable browse internet using Fedora 10. Before this, I was using net in F10 with no problem, F10 was automatically configuring for net settings. But now I cannot connect to internet in F10, but I can connect to internet using windows xp. I have ADSL modem which automatically connects to internet when it is switched on. When I press any site name in Firefox it won't display any thing (in status it shows done).
And even following command not works.
Code:
ping www.google.com
But following command works fine ( I know yum search for software in repo using internet). I wonder how this commend works, while I cannot browse web.
Code:
yum search player
(I am completely dependent on linux). One more thing before occurrence of this problem I had installed xmms, xmms-mp2 and xmms-skins. I don't think this created problem.
View 4 Replies
View Related
May 27, 2009
I installed fedora 10 and shut it down after failing to have ..... run to it. later when I turned on the computer after loading 100% a black screen comes up and i cannot access any further. How can I solve the problem without reinstalling the OS.
View 2 Replies
View Related
Aug 10, 2009
I have a broadcom 4322 with the broadcom-wl driver on Fedora 11. It worked the first time I used it, and since then is unable to detect any networks. I've tried reinstalling the driver, and it still does not work. Any suggestions?
View 2 Replies
View Related
Sep 8, 2009
When I try to connect to any Wireless Networks in Fedora, the option at the top of the screen is grayed out. I can only connect to VPN, a hidden network, or create a new wireless network. My wireless works fine on the Vista side, so I am a bit confused at this
View 5 Replies
View Related
May 28, 2010
I've recently installed Fedora 12 from the Live CD as a new virtual machine using VMware. The issue I'm having is that when I go into the "Add/Remove Software" package manager, everything is blank. I'm guessing this is probably a proxy issue as I do connect to the internet via a proxy server.
View 1 Replies
View Related
Jun 9, 2010
i have Fedora 13 dual booting with Win XP and i cannot ping my router in Fedora. just reinstalled and i'm still unable to ping my router.everything looks like it was installed correctly except in the ifcfg-eth0 it has IPV4_FAILURE_FATAL=yes dont think this should have a value of yes.
View 13 Replies
View Related
Jul 23, 2010
I have a fresh install of Fedora 13 64 bit. I am unable to create VPN profiles in network manager as a normal user.
To test: Logging in with gnome as root, I am able to create a VPN profile in Network Manager Logging in with KDE as root, I am not able to create a VPN profile in Network Connections.
Problem: Logging in as a normal user with KDE, I am not able to create a VPN profile in Network Connections. On the VPN tab, the Add... button is greyed out.
What is required to add VPN connections under KDE on Fedora 13?
View 1 Replies
View Related
Nov 11, 2010
I have a fresh install of Fedora 13 on my Toshiba Notebook. I am able to connect to the internet but can not browse neither by Ethernet or wireless. I have an Intel Pro/Wireless 2200BG wireless card and a Marvell Technology Group LTD 88E8036 PCI-E fast Ethernet card installed. The command ifconfig shows an ip address. I am able to ping by URL and IP address. It does the same with the firewall disabled. I have also disabled the iptable & ip6tables in the services. I have even set fire fox not to use proxy settings. I am just not able to browse at all.
View 2 Replies
View Related
May 6, 2011
I installed Fedora fc14.i686 in a VMware player. I have been able to install many packages off the web.
First of all, I'm having this issue: I am having trouble with GIT, it keeps timing out on me. github.com[0: 207.97.227.239]: errno=Connection timed out fatal: unable to connect a socket (Connection timed out). This is happening over a 24hr period so I think its something on my end.
Also, my apache directory is not visible on my local LAN to other machines. I can browse in Fedora, however. Even the machine hosting the VM can't see my var/www/http directory. I set permissions but I have a feeling its a network issue somwhere. BTW, I can ping the Fedora VM (192.168.0.17) from other machines.
View 1 Replies
View Related
Jun 15, 2011
I am drowning in Broadcom over here. Fedora 15 with Broadcom 4313 wireless inop. I believe that I have made every attempt to get this Broadcom 4313 off and flying that is posted on this, and many other, forums. I had the wireless working on this laptop yesterday when I made an error with a NVIDIA driver that caused me to be unable to boot. I updated/reinstalled the kernel and the fun began. Here is where things are at. note the broadcom version fc13? No idea why that would be 13.
[Code]...
View 14 Replies
View Related
Jun 16, 2011
I am using Fedora 14 and i am unable to open a few sites e.g
[URL]
I read in the forums that this could be bcoz of ipv6 and i have disabled it(or so I believe )
but still i'm unable to open the site.. the page loads half and gets stuck ...
View 3 Replies
View Related
