Fedora Networking :: Fedora 10 Unable To Access To Windows Share Folders On LAN

Jan 8, 2009

I am using F10 desktop edition, all the computers using windows are able to access the shared folders over lan except me using F10. I have tried many things with smb but still unable to connect.I am new to linux so i dont khow much of its technicalities.kindly suggest how can i be able to access the shared documents ..

View 1 Replies


ADVERTISEMENT

Fedora Networking :: Share Folders Between Windows 7 And F12

Sep 25, 2010

I want shared folders and files between my desktop (Windows 7) and my notebook (Fedora 12). I installed with YUM the server SAMBA and configured all according this tutorial (http://www.ubuntu-es.org/?q=node/130156)
also configured the firewall with Firestarter, allow all entries for the HOST.

The problem is that in windows I can not enter to notebook or by network interface or by ip address. and viceversa.There is another option for sharing files, or what I do?

View 2 Replies View Related

Fedora Networking :: Trying To Access Restricted Windows Share From Fedora

Dec 27, 2009

I've lasted a lot longer than usual before resorting to asking around, but I've finally gone delightfully mad. I've been trying to access shares based on Windows 7 Ultimate with limited user access on said shares. I've managed to get into my XP machine, another mate's Vista machine and various Linux boxes with no issues, but that's only for shares that are accessible by everyone. The moment I try to get into a share that requires user credentials, I get "Error returning browse list: NT_STATUS_ACCESS_DENIED".If I try to access restricted shares (be it machine or folder) through Nautilus, I will get a user logon prompt, but it fails. Using smbclient results in just as little success, and now I'm munching through O'Reiley's Samba manual from '99, after realising that I need to basically learn Samba in its entirety to have a hope in hell at getting this to work. The trouble is though, every HOWTO and relevant forum post I get my hands on all seem to concentrate more on the server side of things, and usually servering from a linux box, not the other way around as I'm trying to.

The above Windows 7 machine won't even allow me to view its share contents, whereas the XP machine previously will allow me to browse, but won't allow me to access folders with restricted access. I'm pretty sure there aren't any major issues with the way the Windows 7 machine is setup, as it can be accessed with logon from my Xbox, Ubuntu machine, XP and Vista, with only Fedora having problems getting in as it constantly fails logon. What I'm trying to establish is, if Ubuntu can get in, is there something in my Fedora samba config I'm missing that's preventing me access? My thanks in advance to those of you who've been able to put up with me rambling.

View 8 Replies View Related

Fedora Networking :: Access Windows Share From Machine

Nov 2, 2009

he moved in a new place and there is a huge share on the network machine which runs windows... however he has fedora 10 installed on a desktop pc with a big screen and asked me to configure it so it can access the share... i have almost no experience with fedora and i've been trying to do this for two days now... i installed the samba package, but now what? how to do this because the exact commands are unknown to me... i have the root password and everything else on the network... so i just need to know what ot write in order to be able to mount all the TBs of information on the server...

View 4 Replies View Related

Ubuntu Networking :: Unable To Access Windows 7 Share?

May 5, 2010

I'm currently using ubuntu on my laptop, and I want to access my windows 7 folders via network and file sharing...but there's this problem...

Everytime I want to connect to my Windows 7 pc, it will just prompt me a "password required for xx pc"...and keep looping on every username/password [afaik from the windows account], and I'm unable to login to it.

Even tho I've set "LmCompatibilityLevel" dword key, 1 or 2 [restarted every set] under LSA..it's still the same thing happens...

View 4 Replies View Related

Fedora Networking :: Unable To Access Fedora 10 Shared Folder From Windows

Aug 17, 2009

Linux OS : Fedora 10 (No graphical mode)Windows OS : XP and Windows Server NT...I am able to access from my windows to linux using following step//fedora10 ip username of admin and password...I am able to view the admin and shared printer of fedora 10.When i try to enter in the admin folder i am not able to access it. It is giving error "Access is denied".

View 6 Replies View Related

Ubuntu Networking :: Unable To Access Samba Share From Windows Machine?

Jul 15, 2011

I am unable to access samba share from my windows machine. I am getting the following error

View 9 Replies View Related

Networking :: Share Files And Folders In Fedora?

Aug 11, 2009

How to sharing files and folders in fedora?

View 5 Replies View Related

Ubuntu Networking :: Sharing Folders From It To Windows - Error: "Unable To Mount Location" "Failed To Mount Windows Share"

Jun 28, 2011

I have a computer running Ubuntu 10.10. I am using it to share many hard drives connected to it. I am using Samba. I have successfully shared many folders to one Windows user. I am attempting to share other folders within the shared folders to another user as read only but have not had any success. When I attempt to connect to one of the shares from another computer running Ubuntu 10.10, logged into an Administrator account with the same username and password which I setup on the Samba share I get the error: "Unable to mount location" "Failed to mount Windows share"

View 3 Replies View Related

Ubuntu Networking :: Unable To Access Windows 7 Share From Ubuntu 11.04

Jun 9, 2011

I've read several threads on the subject but all seem to be related to problems I'm not having, or at least the troubleshooting loses me at some point where my results have differed too many times to ignore.So, I'd like to start from scratch if anyone can help me. I'm simply trying to access a folder shared on Windows 7. The Windows computers on the network have no trouble accessing it with the username and password -- both XP and Win7 systems are able to access the share.I can try going to Places > Network > Windows Network -- but I get "Unable to mount location. Failed to retrieve share list from server".I can try going to Places > Connect to Server but I get "Cannot display location "smb://192.168.1.8/". Failed to retrieve share list from server." (tried both computer name and local IP)

I currently have Windows Firewall turned off on the server for troubleshooting purposes.I'm pretty new to Linux still -- are there any commands I can report on from Terminal that will help steer me in the right direction?

View 9 Replies View Related

Ubuntu Networking :: Cannot Share New Folders With Windows 7 Or XBMC

Sep 13, 2010

I have had folder sharing under Samba working for several past versions of Ubuntu. I recently upgraded to 10.04 and my old shares are still working, but any new folders I attempt to share I cannot get to work, despite attempting multiple workarounds.

The Windows 7 error I get is:"Windows can't find "\MYSERVERshared_folder". The name might be misspelled."

View 9 Replies View Related

Fedora Networking :: Remote Access To Folders?

Jan 10, 2011

We have a fedora 10 server that the company connects to with other computers in the office. The file everyone access, public_share has no restrictions to the people that use it. We have another file, art_share that is password protected and everytime someone wants to access it they must login with it, but there are only 3 people out of the 15 that need to access it. Everyone needs to access public_share at some time.

My question is: is there a way to limit the permission for certain remote users to public_share so that they cannot write or execute, but at the same time allowing others full permission? I tried to do use chmod, but then it changes everyone's permission (I assume because of the remote access).

View 9 Replies View Related

Ubuntu Networking :: Accessing Windows Network Share Folders

Feb 16, 2011

I'm using Ubuntu 10.10 since 2-3 weeks. First I tried live CD and the OS seems to be very good. So i installed it on my laptop.So far i had no problems until I tried to access the shared network folders of my Server running on MS Windows Vista and another trial PC running WindowsXP. I'm trying to solve this since 2-3 days, I haven't found a solution.1st of all my network works fine. All computers can ping each other and as the laptop had Windows XP installed the server was accessable.1st I installed the SMB4k tool with this program. I could see the computer names, but as soon as I select a Windows computer the tool searches and nothing happens.

I tried a lot of different variations of this command but in the end I receive this kind of error. I also tried to add -o user=username pass=password, nothing changed.After this I searched information about this error, some forum threads I googled are telling the SMB4K tool modifies the /etc/sudoers file and cause this error. So i tried to change it back with some kind of sudo chmod 0640 etc/sudoers but this won't work it seems I can not modify or edit thisw file using sudo.With the pyNeighbourhood tool I could only see my Laptop but not the Windows PCs.At the end I will install Linux systems on all of my PCs, but only if all my tests will pass .

View 1 Replies View Related

Ubuntu :: Unable To Access (10.10) Share Drive On Windows PC?

Jun 29, 2011

Unable to access linux(ubuntu 10.10) share drive on my windows PCIn my office we have few linux (obuntu 10.10) computers and 3 computers running on windows. We have data stored on one of the shared drives of a linux(ubuntu 10.10) system which has samba installed and we are able to access that folder from other linux systems and 1 windows xp system where it asks for user name and password and is able to access the data while in other 2 windows systems (with 1 having xp and 1 having windows 7) we are unable to access the folder because it does not ask for user name and password and it shows an error network drive not accessible as you may not have the permission.

View 3 Replies View Related

Fedora Servers :: Unable To Connect To The Share From Windows Machine

Jun 14, 2011

Trying to setup Samba for the first time and am unable to connect to the share from my Windows machine. It is a very basic setup, just trying to setup a single share to use a backup location for my windows files.

I've done the following:
1. Fresh install if fedora 15
2. installed samba
rpm -qa | grep samba
gives the following:

[Code].....

3. Used samba server configuration to setup the share and create the samba users
4. When I tried to connect from my windows machine I get the error that the server is not accessible, you might not have permission to use this network resource or I get the error "windows cannot access server, check spelling and try again.

Both computers can ping each other. I opened samba ports in the linux firewall and tried to connect again: same error Disabled firewall all together and have the same error. Here is the output from the testparm command

[Code].....

View 6 Replies View Related

Fedora Networking :: How To Access NFS Share In 12

Dec 3, 2009

In my office i've installed fedora 12, when ever i was trying to access NFS share in LAN environment i was getting these errors. $sudo mount x.x.x.x:/misc/export /misc/local , after executing this command i was getting these errors.

/usr/sbin/start-statd: line 8: /sbin/rpc.statd: Permission denied
/usr/sbin/start-statd: line 8: /sbin/rpc.statd: Success
mount.nfs: rpc.statd is not running but is required for remote locking.
mount.nfs: Either use '-o nolock' to keep locks local, or start statd.
mount.nfs: an incorrect mount option was specified

View 2 Replies View Related

Fedora Networking :: How To Share Internet From Windows Xp To Fedora 10

May 15, 2009

I am just struck in a situation of sharing internet connection with windows xp and fedora. the scenario is i'm connected to internet via wireless card in winxp system, i connected fedora and winxp through ethernet cards via cross over cable.

Now i shared the wireless connection in winxp by checking "allows other user to share this internet connection."

I have given ethernet adapter in windows xp an ip address"192.168.0.1/24"

I have given manually an ip address "192.168.0.2/24 with gateway 192.168.0.1" in fedora computer .

I have run the network setup wizard in winxp and name the workgroup as Mygroup then changed the smb.conf file as follows:

The probelm now is i can't able to get internet access in fedora i can able to ping fedora ip address from win xp. but in my network places ->workgroup computers there is nothing .

View 1 Replies View Related

Server :: Unable To Access Samba Share On CentOS 5.4 From Windows XP Or Vista

Jan 23, 2010

I can't be the first one with this problem. What am I missing?

I have setup Samba servers in the past, just none under SELinux. The last one I configured was a couple years ago, so I wouldn't doubt I'm a bit rusty.


---- Environment summary:
Clean server install of CentOS 5.4 includes SELinux
- lets call this 'server'
- updated samba to 3.0.33-3.15.el5_4.1

Client1 - Windows XP sp4 - WINS configuration uses 'server' noted above
Client2 - Windows Vista - WINS configuration uses 'server' noted above

---- What works / what doesn't ------
Clients can see the server (XP and vista) in network neighborhood.
The following does not work from windows (xp or vista)
net view
net view \server
net view \server-ip
net view \servershare

This does work on the server
smbclient -L \server
smbclient -L \server --user validuser
smbclient -L \client1 --user validuser


---- What I have configured and tried (config/output below) --------
firewall ports for samba are open
SELinux enforcing or permissive
file context is set on share
samba booleans are set

***firewall
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p tcp --dport 445 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 137 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 138 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p udp --dport 139 -j ACCEPT

***SELinux mode/booleans
# sestatus
SELinux status: enabled
SELinuxfs mount: /selinux
Current mode: permissive
Mode from config file: enforcing
Policy version: 21
Policy from config file: targeted

# getsebool -a | grep smb
allow_smbd_anon_write --> off
smbd_disable_trans --> on

# getsebool -a | grep samba
samba_domain_controller --> on
samba_enable_home_dirs --> on
samba_export_all_ro --> off
samba_export_all_rw --> off
samba_share_fusefs --> off
samba_share_nfs --> off
use_samba_home_dirs --> on
virt_use_samba --> off

***filesystem
# semanage fcontext -a -t samba_share_t �/share/photos(/.*)?�
# restorecon -R -v /share/photos

***Disks
]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 9920624 2070872 7337684 23% /
/dev/sda1 101086 19146 76721 20% /boot
tmpfs 1846656 0 1846656 0% /dev/shm
/dev/mapper/VolGroup00-xen
100791728 202540 95469188 1% /xen
/dev/mapper/VolGroup00-photo00
251981556 191716 238989840 1% /share/photos
/dev/mapper/VolGroup00-dmsdoc00
100791728 192256 95479472 1% /share/alfresco
none 1846656 104 1846552 1% /var/lib/xenstored



***smb.conf
[global]
workgroup = workgroup
netbios name = server
security = user
name resolve order = wins hosts lmhosts bcast
encrypt passwords = yes
hosts allow = 192.168.0.
hosts deny = 192.168.122.
interfaces = eth0
passdb backend = tdbsam
oslevel = 222
local master = yes
domain master = yes
preferred master = yes
cups options = raw
username map = /etc/samba/smbusers
wins support = yes
log level = 4
guest ok = yes

[photo]
comment = Photos
path = /share/photos
read only = yes
guest ok = yes

View 5 Replies View Related

Fedora Networking :: Folders Not Visible In Windows?

Feb 24, 2011

I can see my windows folders in Fedora but cannot access fedora folders from within windows Xp.

View 12 Replies View Related

Ubuntu Networking :: How To Access Windows 7 Folders

May 14, 2010

I have ubutu10.0.4 installed on HP NC6000.I have another laptop running windows&.ow do I access my windows machine from ubuntu.I want to copy files from ubuntu to my wondows machine

View 1 Replies View Related

Ubuntu Networking :: Samba And Windows Networking - Read / Write Access To All Folders Contents From Both Machines

Mar 9, 2011

Ive managed to install samba, I've shared a folder. I can access from a Windows 7 machine via \ubuntupublic. I can put files in the folder form the ubuntu machine and edit them on the windows box. I can put files in the folder/share from the Windows box but then I cannot edit them on the Ubuntu machine (they are read only and have a "Lock" over them). I can fix this by going to the properties of the file/folder in Windows and manually assigning "Everybody" full control (then the lock disappears and all is well.) I want read/write access to all the folders contents from both machines all the time (security is NOT a concern I WANT the permissions wide open) what am I doing wrong?

View 7 Replies View Related

Fedora Networking :: Samba Share With Two Network Cards - No Internet Access

Mar 1, 2009

I have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:

Code:
eth0
|<--pppoe connection
|
MyComputer
(fedora 10)
|
eth1
|
switch
|
comp.1 comp.2
Win OS MacOS

View 2 Replies View Related

Networking :: Unable To Access NFS Share Which Is Shared On HP NAS Box?

Aug 3, 2010

Currently I am using HP NAS box and we have installed HP Storage Works storage Mirroring on NAS for Replication. Windows 2008 is installed on this NAS box. I have shared a directory as NFS share on this NAS box and allow anonymous read and write access to all machines. I want to mount and access this NFS share directory on one LINUX machine and this Linux machine has Redhat 5.3 Enterprise edition.

1.The issue I am facing here is, I can mount the NFS share on my Linux machine successfully but I can not do read/write on this NFS share. Whenever I try to access this mounted NFS share, I always get error Permission denied. I can do any read/write operation on this mount point. Please provide the inputs to resolve this issue.

2.How do I mount NFS share with user credential and password? Can I share a directory as NFS share with user credential which I can use when I mount the share? 3.Is there any other way to access NFS share by using user authentication and password?

View 3 Replies View Related

Ubuntu Networking :: Access Shared Windows Folders On Xubuntu 9.10?

Apr 24, 2010

I have a desktop pc running Windows 7 and a netbook running xubuntu 9.10. What I am trying to do is to access the shared folders on my windows 7 pc on my xubuntu netbook.

View 9 Replies View Related

Fedora Networking :: Mounting A Windows Share In FC 10

Jun 12, 2009

Usually you put external mounts in the /mnt folder, then link there with a symbolic link if you want access from somewhere else. By keeping all of your mounts in /mnt its easier to manage them as your system and ability grow.

You need to make mounts as root. Mounts take the data in the target and put it on top of an existing folder. When you mount something on top of a folder whatever was there becomes invisible until you remove the mount on top of it. If there is a problem with a mount and it does not work, any writes to the mount will go to the folder underneath, and any data you expect to read from there will not exist.

In making a mount you should realize that the char requires an escape char in bash to show up in the final output to the command. The escape char is also . Therefore to show \ in a Windows command, you need to type \\. Also, spaces must be escaped once with .

Howto:

You should substitute your ip or name for 10.10.9.5

Reminders: Make sure your Windows folder is shared read/write if you need to write to it.

You probably want to change permissions on /mnt/WindowsDocuments to 777

Tips:If you want a link from your desktop to your Windows "My Documents" folder you can now do this:

$cd ~/Desktop ln -s /mnt/WindowsDocuments WindowsDocs

This will make a symbolic link to /mnt/Windows, and if you execute: ls -l ~/Desktop you should see the links information in the response

Finally, if you want to keep a local backup of what's on the windows box in a local folder you could do:

The ~ char is shorthand for /home/<uername> and represents your home folder.

The result of the rsync command is to make a copy of WindowsDocs (which points to your mount at /mnt/WindowsDocuments which is linked to your Windows machine shared 'My Documents' folder) and put it into ~/WindowsDocumentsBackup

As always, make use of the man command if you get confused or the info command for more detail. ie man rsync

View 1 Replies View Related

Fedora Networking :: How To Share Printer To Windows

Jun 28, 2010

I am trying to share my printer with a windows xp machine.Samber server and configuration tool is installed. Still I have no clue how to get this to work. The printer is setup and working on my Fedora desktop.as anyone done this before and can give a step by step description on how to setup a Linux printer on a network (home-network) with windows.I already searched for it but non of the tutorial were clear enough or missing something.

View 12 Replies View Related

Fedora Networking :: How To Connect To Windows Share?

Mar 27, 2011

I'm running Fedora 13 on my laptop and am trying to share out a folder from a Win7 computer. Folder on Win7 machine is set to allow access to everyone.In Fedora, I have SELinux disable, I've made sure samba is allowed in the firewall, and that the smb service is running. There's no password on the Win7 computer, so in the Windows Share setting on Fedora I just put the username and left the pass field blank.

I've seen some things say all you have to do is go the the "Network" place...but somehow that seems to have become non-existent and I don't know how to get it back.Also, trying to connect to smb://WinShare/Share results in it saying that the server has timed out.

View 4 Replies View Related

Fedora Networking :: How To Access Shared Windows Files From Fedora System?

Mar 24, 2009

How can I access shared Windows files from a fedora system

View 3 Replies View Related

Networking :: Can't Access Mounted Windows Share?

Jan 6, 2010

It's the strangest thing, I've done this on a couple othervers with no issues whatsoever... here goes:I need to mount a windows share to copy some files to it, so I used this command which gets no errors:

Code:
sudo mount -t smbfs -o username=XXXXX,password=XXXXX,domain=XXXX.com //192.168.12.30/operrors /home/XXXX/scripts/operrors

[code]...

View 1 Replies View Related

Fedora Networking :: Share A Printer To Windows Machines?

Feb 9, 2009

I have a machine running fedora 10 that has a printer in cups that i want to share to the windows machines on the network.I cant find any mention of shareing printers in the cups interface

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved