Currently my setup is a road runner cable modem connected to a desktop via a ethernet cable. The networkmanager lists "Broadcom BCM440-BO 100BaseTX" device not managed. I've turned off the power to both the cable modem and the computer. I then turned on the power to the cable modem and then the computer. If I try the firefox browser, it can not connect to the internet.
View 3 RepliesI use my T61 both wireless and in the dock, where I switch to the wired connection. After the latest round of updates, I seem to have lost the ability to switch to the wired network. When I turn the laptop on, I see it connect to the wireless network, but when I left click on the tray icon under Wired Network is says Device not managed. I have not made any changes to anything in the last couple weeks, besides some updates. How do I go about getting the wired network back in there?I tried to add eth0 back into System - Preferences - Network Connections, but whenever I try and add eth0, but it still says Device not managed.
View 2 Replies View RelatedI'm having trouble getting onto the internet with ubuntu 9.04. I have just moved house and have just got the internet set up here (typing this on windows laptop with wireless). My ubuntu desktop is plugged in to the network, but in the top right hand corner when I click on the network icon I get: "Wired network device not managed"
In my old house I had a static IP. Is this anything to do with it?
when I first installed it on my IBM thinkpad, the eth0 was working correctly. I had someone try to install the network card for me, and something was changed to where now the wired connection is displaying "device not managed".
View 2 Replies View RelatedYesterday I did an upgrade and today my box is unable to connect to the internet.
I have tried another cable, it didn't help.
Basically NetworkManager does not connect eth0 to the network, if I try to run ifup from the command line I get:
Code:
I can see in network configuration settings, that the device has been correctly detected and eth0 interface is correctly activated, yet when I try to uncheck the box manage by NetworkManager and start it manually, it tells me that the cable is disconnected... I've tried two different cables, different ports on my router - no help.
I posted earlier and got no response, so here i go again. I installed openSUSE 11.3 KDE, it all works fine but the wireless doesnt work and i cant connect to the internet at all, i don't know how to, and i don't even know if the proper drivers are installed. I posted this in the last thread:
"i ran this this command in ubuntu:
Code:
lspci | grep -i network
came up with this result:
Code:
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
I'm not sure if its going to help any but at least you have the name of the wireless card. Please help, Without internet.
Seems everytime I upgrade wireless quites working.
Anyways, here's the info:-Acer Aspire One AOA150-1997
Quote:
kevin@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code]...
I think that's all that would be needed to help diagnose the issue. I'm kinda new to linux, and this is primarily a music machine.
I have a problem with my internet connection this is the picture the device is Realtek RTL8187. i didn't know how can i manage this device to work so could you help me i don't have an internet connection in ubuntu right know and i really wanna move to ubntu my verison is 9.10
View 9 Replies View RelatedI installed Linux 6, configured the network during the install with a static IP and when I do an ifconfig command it doesn't show an IP Address. Can't get out to the Internet because I don't think I have an IP/Address. I restarted network, went into preferences-network connections and everything looks fine, ran system-config-network and everything looks fine. When I do an ipup ifcfg-eth0 and get the message "Connection activation failed: Device not managed by NetworkManager". Is there an option I failed to load at install or I need to install now?
View 2 Replies View Relatedi have created dialup internet connection in windows xp using my bluetooth enabled mobile and bluetooth device ,,and my question is that how to set up the same procedure in my fedora 11 system.
View 1 Replies View RelatedAfter the use of pppoeconf, the network manager does not recognise neither the wired nor the wireless connection anymore. (It nicely did it before that) I tried to replace the etc/network manager folder with that of a different machine. Still the same. What else can I do to reset Network Manager ?
View 1 Replies View RelatedI instaled vmware and created a virtual machine which is bt4. first of all i cant creat an user password and i log on with root second when i run the command airmon-ng i cant get my device name or anything caz nothing comes up under interface or i forgot what its caled.
View 3 Replies View Relatedi finished installing CentOS 5 and managed to connect to the Internet. My Network Interface Card (NIC) is "Atheros L2 Fast Ethernet" and it is not in the device list. anybody can tells me what i should do now to be connected to the Internet?
View 8 Replies View RelatedI have a USB Tata Docomo (USB Modem to connect internet) lsusb shows
Code:
Did a lot of Googling etc on forums and seems a few people have been able to use it.
1) [url]
2) [url]
Though I followed steps as per above links but I my connection via network manager does not establishes. Which as per above links should have come if things went correctly. In Windows same modem works correctly.
I also installed usb-modswitch but not sure as how to use it. I installed it via Synaptic (I use Ubuntu)
Quote:
Shows
Quote:
Quote:
My kernel is
Quote:
Quote:
Like this it keeps on repeating above steps. My service provider does not give a user name and password.
Here is my wvdial.conf file
Quote:
Next set of commands
Quote:
Quote:
Quote:
Quote:
Quote:
I also tried as per this post [url]
Quote:
How do I connect to internet?
Is the driver for my device missing on my system?
Iam using suse linux desktop 10.0. when i connect tata photon USB modem for internet, the system recognises the USB device but unable to connect to internet. How to use tata photon in suse linux
View 3 Replies View RelatedI installed the 64-bit version of Fedora 12 on my MacBookPro5,1, and I am unable to establish a connection to my wireless network, which I can connect to fine with I boot the computer into Mac OS X. Here is my operating system information:
Code:
$ uname -a
Linux tosh 2.6.31.12-174.2.3.fc12.x86_64 #1 SMP Mon Jan 18 19:52:07 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
Here is information about the PCI devices available on the system:
Code:
$ lspci
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b3)
[code].....
My wireless connection has been giving me some problems, so I decided to try a wired connection directly to the router. However, when I try to do that, it doesn't work. When I click the network manager icon, it says that the wired device is not managed.
ifconfig gives this:
Link encap:Ethernet HWaddr 00:13:d3:dd:12:79
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::213:d3ff:fedd:1279/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
I ran sudo dhclient to try release and renew my IP, in case that was the problem. It released and renewed successfully, but still didn't connect to the Internet.
I'm running Squeeze and I'm looking 3 days now for a solution in some weird problem. The NetworkManager Applet shows that there isn't connection although I am connected. The icon has this small "x" and when mouseover it says "No network conncection". Moreover when left clicking it, it says
"Wired Network Device not managed"
While I was looking for the solution a came across this post by an Ubuntu developer who says:network-manager-applet displays the connectivity state of network-manager's managed interfaces not every interface. So the title "network manager says disconnected but is connected and working" is actually misleading. The interface is connected and working but not from network-manager's point of view since it is not managing the interface. Additionally, in Lucid now network-manager applet displays nothing now for non-managed interfaces so is less misleading. You can check to see whether or not an interface is managed by network-manager by using the command line too nm-tool. You'll see "State: unmanaged" for unmanaged interfaces.
I have used the information available at wiki.debian.org/iwlagn to install firmware etc for my Intel Pro Wireless 4965 card.According to the network applet the connection is good, but it only seems to work when my ethernet cable is plugged in.I get no connection without the cable in, even though clicking on "edit connections" showshat ethernet is shown as "device not managed".With the cable plugged in I can get emails. Iceweasel will connect to the internet, but Epiphany will not.Without the cable I get no internet connection at all
View 9 Replies View RelatedI have installed linux 10.10 and i want to connect internet through USB Bsnl EVDO modemprocedure/commands to connect to internet
View 5 Replies View RelatedJust installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
I have just installed the last FC distro, and everything works good, except the wireless network.I have a Linksys N-Ultra WirelessN USB wifi card, model WUSB600N.It uses the rt2x00 driver, concretely the rt2870 driver (at least, thats the driver included in the original device drivers CD).Right now, the problem is that i don't know how to make my Fedora 12 to enable and/or connect to internet.
dmesg | tail
usb 1-3: Manufacturer: Cisco-Linksys LLC
usb 1-3: configuration #1 chosen from 1 choice
[code]...
First, excuse me for my bad english I want to connect a bluetooth device with the command rfcomm. In a terminal, I put the command :
Code:
rfcomm connect 0 00:80:98:E4:07:53
And the system answers :
Code:
Connected /dev/rfcomm0 to 00:80:98:E4:07:53 on channel 1
Press CTRL-C for hangup
On fedora 10, or 11, I can use this command with all users. On fedora 12, only the root user can connect and use this device. Other users have the message :
Code:
Can't open RFCOMM device: Permission denied What can I do to resolve this problem?
I just upgraded to 15 and was wondering if it was possible to specify which devices to prioritize a route through. I have my machine, a laptop, connected to my family's router for an internet connection and a wired connection to a personal router for a faster and private connection between my other two computers and a network storage device. Whenever the laptop is connected to my personal router everything goes through it and it can't connect to any external web sites. But when I unplug it and go only on my family's wireless everything is fine, except I can't connect to the storage device since it has no external connections.
View 11 Replies View RelatedI am not able to configure ubuntu 9.04 on network ,
i get error Network UNCLAIMED. error ethernet controller is BROADCOM Corporation Device 1692 ( rev 01)
Finally got skype working on my Fedora 11 x64 version. Well, of course, the first thing is to download the 32 bit "skype-2.0.0.72-fc5.i586.rpm" from Skype official website..At first, I found a guide on [URL].. and followed the instruction.Installed skype using
Code:
rpm -i --force --nodeps skype-2.0.0.72-fc5.i586.rpm
Skype failed to start.. It's apparently dependency issue..
Then searched through and found out another "Howto" for F10.. http://forums.fedoraforum.org/archiv.../t-217122.html I tried to yum, but none of the following packages are found.
Code:
yum install alsa-lib.i386 dbus-libs.i386 e2fsprogs-libs.i386 expat.i386
fontconfig.i386 freetype.i386 glib2.i386 glibc.i686 keyutils-libs.i386
krb5-libs.i386 libcap.i386 libgcc.i386 libICE.i386 libpng.i386
libselinux.i386 libSM.i386 libstdc++.i386 libX11.i386 libXau.i386
libxcb.i386 libXcursor.i386 libXdmcp.i386 libXext.i386 libXfixes.i386
[Code]...
There are also some thread talking about this problem but I forgot to bookmark them. It seems that skype needs 32 bit lisa.. So I then installed the lisa-lib-1.0.20-1.fc(i586). Meanwhile, I configured sound in, out and ring to hw... Also disabled "Allow skype to adjust .. mixer level" . When I run skype from xtern, it still reports erors related to lisa.. But it works now...
I have ADSL Internet and with it updated my F12, 3 days ago. after that I can't connect to internet! when I click on NetworkManager in top panel and choose my connection to connect internet, dispaly a notification that I can't connect to Internet! This is my /var/log/messages Outputs:
[Code]...
I have Fedora 12 Repo installed. The computer has wire and wireless connections but I cant set it up any one of them. I can add a wire connection but it does not connect. I cant add any wireless connection because all the different options dont show up the apply button active. The dual boot does not work also. It only allows you to log on to Fedora Repo. I tried to install the i386 option but it failed to connect. I was using Mepis 8.5 before and I did not have any of these problems when I first installed it.
View 1 Replies View RelatedI have a voip calling client, called smartvoip (URL...). Current the client is available only for windows. So, I suppose it should be possible to get it running on wine.Even though the application comes up, it cannot connect to the internet and log me in.
View 1 Replies View RelatedI am using Fedora 13. I used to connect to the internet well. I am not able to connect to the internet now wired. I connect the cable to my laptop which has windows 7 and I can access internet.
View 10 Replies View Related