Fedora Networking :: Create A Vpn - Pptp - Using The Networkmanager - Failed ?
Sep 21, 2009
I thought configuring a vpn would be a piece of cake, but it seems I'm missing something.
I'm attempting to create a vpn (pptp) using the networkmanager (0.7.1). I enter the gateway (I assume thats the server I'm trying to connect to) and my login information. What is the NT Domain?
When I try to connect it only tells me after a while that it failed to do so. How can I find the information on what went wrong in the process?
View 2 Replies
ADVERTISEMENT
Jun 11, 2009
I just installed F11 and can't make VPN connection to PPTP server using NetworkManager.
This is what I get:
** (nm-applet:8092): WARNING **: Error in getting active connection 'Vpn' property: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (nm-applet:8092): WARNING **: _nm_object_array_demarshal: couldn't create object for /org/freedesktop/NetworkManager/ActiveConnection/3
I can connect to this server from Fedora 10 using identical settings.
VPNC tunnels work fine.
View 1 Replies
View Related
Feb 26, 2010
pptp, after last update NetworkManager. My linux is Fedora Core.
View 5 Replies
View Related
Nov 11, 2009
I am trying to connect to our work server (windows), however, without succes In the log I get the message: "Failed to parse server response"
And when I close the vpn connection window I get "there were no valid vpn secrets"
I Use F10 with xfce on an aspire one.
View 2 Replies
View Related
Aug 10, 2010
Yesterday I did an upgrade and today my box is unable to connect to the internet.
I have tried another cable, it didn't help.
Basically NetworkManager does not connect eth0 to the network, if I try to run ifup from the command line I get:
Code:
I can see in network configuration settings, that the device has been correctly detected and eth0 interface is correctly activated, yet when I try to uncheck the box manage by NetworkManager and start it manually, it tells me that the cable is disconnected... I've tried two different cables, different ports on my router - no help.
View 3 Replies
View Related
Mar 12, 2010
I setup a PPTP VPN connection in ubuntu 9.10 (x86_64) using NetworkManager. After enabling the VPN connection, I can browse web pages (it's perfect) but after a while the vpn connection is terminated! The following is my syslog after connecting and terminating:
Code:
Mar 12 22:10:10 amir-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Mar 12 22:10:10 amir-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 2204
[Code]....
View 7 Replies
View Related
Jan 7, 2011
I am trying to connect to a PPTP VPN at work, and I cannot accomplish that. Both server and client are using Ubuntu 10.10.
Code:
Jan 7 11:32:26 multicore-dev03 NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
[code]....
View 9 Replies
View Related
Mar 13, 2010
i have a VPN server PPTPD on Centos 5.3
eth0: 62.2.2.x (public on the internet)
GW: 62.2.2.1 (cisco router)
i want to configure my ppptp server to allow users access internet with their own public ips of class 62.2.3.0 62.2.4.0 62.2.5.0
every time i configure my server all users can get thier IPs but they only go out with my server IP same as NAT not routing.
can you show me the proper configuration to make my users connect with public IP and have internet access. use specific DNS ( i did this but some users can not brows by DNS)
is there any way to specify an expired date for each pptp user.
View 1 Replies
View Related
Sep 17, 2009
I'm trying to connect to a Microsoft ISA PPTP server from my Linux box. The box I'm connecting from is itself a router. I have no problem connecting a Windows XP machine to the VPN via this machine. This is fine, but I would rather connect via the Linux machine, giving me far more advanced routing options (i.e. no to send every packet from the XP box completely unnecessarily via the PPTP tunnel). The Linux router is running Debian Lenny.
I've checked iptables. There were initially some issues. I've fixed those.
Invoking pppd from the console, I can see that authentication succeeds, but then some negotiation goes wrong and the server terminates the connection. Here's the output from pppd, with the more sensitive stuff removed:
Code:
<hostname>:~# pppd call <peer> nodetach debug
using channel 19
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xe3e45f75> <pcomp> <accomp>]
code....
View 1 Replies
View Related
Jun 16, 2010
This questions is a little complex but here goes.at a central HQ I have a windows server 2008 R2 machine running routing and remote access. At my home office i have a class C lan with a Fedora 13 machine. I can get fedora 13 to connect using pptp no problem. I have my router running tomato set to redirect all traffic to teh 10.0.0.0 network to my linux server. My questions is how to I make the fedora 13 machine pass all the traffic from my network with destination 10.0.0.0 over the vpn tunnel? so for instance if i ping anything 10.x.x.x from any machine on my network it will find it and reply?
View 1 Replies
View Related
May 19, 2011
my vpn server has been working well. but all user accounts are stored in /etc/ppp/chap-secrets. the question is how to create a pptp username through mysql?
View 3 Replies
View Related
Jul 13, 2009
Just moved over from the dark side (Vista) and was wondering how I can get two (or more) PPTP VPNs connected at any given time. I usually attempt to multi task (although swambo says I can't) and work on various clients' servers at the same time. The GUI network manager thingy only allows me to dial up one VPN at a time. Is there perhaps a cli version and if so where would I go to get a tutorial on this please. BTW, running F11 32bit. Tried Debian and Ubuntu as well and found F11 to blindingly fast on my DualCore Toshiba laptop. Pity I can't see the additional 1Gb of RAM though. (4Gb in total).
View 2 Replies
View Related
Dec 5, 2009
I've followed the information on fedoraguide.info for configuring PPTP but I'm still unable to connect to my windows VPN
This is what I'm getting in /var/log/messages code...
View 1 Replies
View Related
May 8, 2010
I've got a FC PPTP server up and running but can't connect to it using VPN. I'm using NetworkManager but the connection fails each time. On the server, I'm seeing the following in the /var/log/messages:
Quote:
May 8 16:37:05 li99-23 pppd[2113]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so is for pppd version 2.4.3, this is 2.4.4
May 8 16:37:05 li99-23 pptpd[2112]: GRE: read(fd=6,buffer=8059780,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
[Code].....
Ive checked that the name,passwords all match, which they do. Has anybody seen this before ?
View 1 Replies
View Related
Jan 13, 2010
I currently managed it to get a pptp-connect to my home network. now I have another little problem. NetworkManager always routes the whole network traffic over my home network if i am connected to the home network.If i set the "Use this connection only for resources on its network" I have do manually say:
Code:
route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0
After that only the correct traffic runs over the vpn. Now my question is it possible to setup the route via the networkmanager gui?
View 3 Replies
View Related
Mar 14, 2009
I used VPN before in Windows only.
How can I connect to VPN network by PPTP protocol in a simple way ?
View 12 Replies
View Related
Feb 25, 2010
I have updated the system this morning and the vpn stopped working!It gives me an error: invalid secrets.I use network manager to connect to a pptp vpn connection, I use fedora 12.Does anyone know the problem?
View 2 Replies
View Related
Dec 1, 2009
I can not stablish PPTP VPN because SELinux blocking Network Manager.
I get the following:
Summary: SELinux is preventing NetworkManager (NetworkManager_t) "unlink" to ./reso
Code:
I'm attaching complete alert.
View 1 Replies
View Related
Nov 25, 2009
I have no problems seeing the networks available and connecting to a network in KDE. But there is no network manager in GNOME. I might have messed up with the settings earlier. What I can do though is run knetwork manager every time I start up (or add it to start up programs). But that opens up the KDE wallet which would rather avoid.I am thinking I need to install something related to NetowrkManager.
View 2 Replies
View Related
Feb 20, 2011
if the NetworkManager uses wpa_supplicant? I normally dont use NetworkManager and decided to try it. I started it and tried it out and it works with WEP and WPA! I cant figure out why using the iwconfig command is not working by itself for WEP. WPA working with NetworkManager is just a bonus though.
View 4 Replies
View Related
Jun 25, 2011
I'm an inordinate amount of trouble getting F15 to run without NetworkManager. If I boot with the NetworkManager service enabled, my NIC presents as expected at /dev/eth0 (I'm using biosdevname=0). However, when I stop the NetworkManager service, /dev/eth0 disappears from the filesystem.If I boot without NetworkManager enabled, /dev/eth0 is never created. Reviewing dmesg, udev is loading an ethernet driver.
View 1 Replies
View Related
Feb 3, 2009
I loaded F10 up on my laptop a few nights back. NetworkManager connects via Ethernet just fine. It will also connect wirelessly, but only when security is disabled. I've been using 128-bit WEP.
When I try to connect using security, this is what appears in the log:
Code:
Jan 29 21:07:17 localhost NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 29 21:07:17 localhost NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
[Code]......
View 2 Replies
View Related
Feb 5, 2009
after fiddling around with compiz-fusion and KDE, my network suddenly disappeared. I looked in the package manager and apparently I don't have the gnome applet for networkmanager...but everything else I seem to have (the git version not svc or w/e) Anyone know if installing the applet will let me choose my wireless network and connect to it? Right now I think so, but what I have to do is boot into windows, find the package on the web and download it, then boot into fedora and install it
where I can find the fedora 10 networkmanager-gnome package (git version for x86_64)? I looked around and found the svc version and a git version for i386, but my OS is x86_64 and I couldn't find any git versions of it for 64-bit fedora's. btw, I have no idea what git and svc mean, but when I tried to install the svc version, it told me I had to install svc versions for all the other networkmanager packages...
View 3 Replies
View Related
Mar 19, 2009
I recently installed F10 x86_64 on my Lenovo T61 laptop, and while I'm quite pleased with F10, I am having a difficult time with my wireless card. I spent most of yesterday searching for a solution, but none have presented themselves. Scenario: I am trying to connect to a HIDDEN SSID with NO ENCRYPTION (work Wifi, don't ask) using network-manager and its associated applet.
Symptoms: I left-click on NetworkManager, select "Connect to Hidden Wireless Network", enter my information, NetworkManager does a few things, and finally I'm told that NetworkManager cannot connect to my network.
[Code]...
View 1 Replies
View Related
Apr 14, 2009
I have just installed Fedora 10 on an old laptop and was quite impressed with how smoothly it all went ... until it came to setting up networking!
I have battled for three days now and I'm almost there;
- installed updated firmware to the built in Broadcom 4306 wireless network adapter
- got NetworkManager to work with a static ip address by manually editing the ifcfg-wlan0 file
- managed to get the WPA security to work
The only problem I am left with is that there is no default route; if I set one up using: ip r a default via 10.1.1.1 dev wlan0
Then everything starts working.
If I try to add routes using the NetworkManager gui interface they dont get saved (no suprises there then! ).
I have tried creating a route-wlan0 file in /etc/sysconfig/network-scripts/ but this seems to be ignored by NetworkManager.
Since the NetworkManager GUI is almost useless, does anyone know if there are any other configuration files I can manually modify to get a default route set?
View 6 Replies
View Related
Aug 14, 2009
Just upgraded from Fedora 10 to 11 and cannot setup wireless connection via NetworkManager. By some reason it doesn't store WPA key. There are following errors in the message log:
Code:
Aug 14 14:37:05 mike-dev NetworkManager: <WARN> connection_get_settings_cb(): connection_get_settings_cb: Invalid connection: 'NMSettingConnection' / 'uuid' invalid: 1
Aug 14 14:37:11 mike-dev NetworkManager: <WARN> wait_for_connection_expired(): Connection (2) /org/freedesktop/NetworkManagerSettings/2 failed to activate (timeout): (0) Connection was not provided by any settings service
View 9 Replies
View Related
Feb 15, 2011
Fedora 13 64. NetworkManager tries to unlink /etc/hosts and is blocked:
Code:
SELinux is preventing /usr/sbin/NetworkManager from unlink access on the file /etc/hosts.
Additional Information:
[code]....
View 2 Replies
View Related
May 28, 2011
I upgraded from F14 to F15 using the DVD. The network worked fine after the upgrade.This morning I updated to the latest RPMs and rebooted, and now the network donot work!ifconfig shows only the lo interface. NetworkManager does not start, /var/log/messages shows signal 11.I tried to boot with the original kernel, but the results are the same.
View 6 Replies
View Related
Jul 14, 2011
i'm trying to replace default F15 NetworkManager with wicd. i installed wicd and used "chkconfig NetworkManager off" to disable NM but the problem i'm getting is
1. after each reboot i have to start wicd manually from su. any solution to get it loaded automatically?
2. also as i stopped nm, i have no network shortcut in taskbar, anyway wicd icon can be integrated in taskbar?
View 1 Replies
View Related
Mar 15, 2010
downgrading PPP, NetworkManger, and NetworkManager-gnome. This worked but is there an easy way to know when it is safe to apply the updates that are available?
View 2 Replies
View Related
