i hav 2 laptops but there is only one LAN port and i recently splitted them with my own router, the problem is the internet works fine, but i cannot access the schools's network e.g. my friend's shared folder in another room, the school's shared folder, etc. i can only access my own local router network.
View 7 Replies
I am trying to map to my schools shares VIA their network.
Normally on windows, I would just say Run and type the network path and it would open a window with the folders.
the path is \KNA11.XX.ON.CA you need to be on our VPN to connect to it, which I am.
How do i access this directory in ubuntu? And even better, make it a permanent shortcut or mountpoint so that i can easily access it later without having to re-mount it.
In my university linux lab I have access to a linux network drive where I save programming code.I have ubuntu as a guest in virtualbox on my xp computer in my dorm. How can I map the linux network drive to ubuntu for use in virtualbox? I already have it mapped in windows, but can't get it mapped in ubuntu / virtualbox
View 1 Replies View RelatedI just installed Ubuntu on my laptop and I found that I cannot connect to my school's wifi network while i have no problem connecting using windows. Also I can connect to my home's wifi network. The details of the wifi network are as follow:
SSID: Universities WiFi
Authentication: WPA
Data Encryption: TKIP
EAP Type: PEAP (EAP-MSCHAPv2)
[Code].....
I have downloaded the certifate required and put it in my home directory and selected that .cer when setting up the connection But I still can't connect to it
I have been using ubuntu for my college work for some time, and suddenly last week for ubuntu users in a specific Department/building lost the ability to connect to the internet through the school proxy.The problem seems to have effected only our department/building .
What is so annoying is even its the same computer we have internet if we use Windows but no internet for ubuntu.When using ubuntu the DHCP server automatically assigns IP's just as before, and we can reach the Default gateway using ping, but cant reach the proxy server. When we ping the proxy we get a message saying it refuses a connection. When using firefox or chrome we get the same message when we try to browse <proxy server not available>. The network guys says that the only change they did recently is to activate ipv6. But i fail to see how this can become a problem.
I am putting together a server and computer lab at my school for Standardized testing, and am planning on using debian for it. But first, i must prove to the school board that this is a possible and viable option, so right now it is one pc with 1 gig ram (Going to be the server for this experiment), and two others with around 512 mb ram.the problem with all this is, the computers in the lab cannot have hard drives, as there is some sort of licencing issue. So I need to be able to have these two testing computers boot from the server's hard drive.
View 14 Replies View Relatedwhenever I try and acces my windows network it just says "Failed To Receive Share List From Server"It has previously worked fine in ubuntu and suse. Anyway I can get this to work?
View 2 Replies View RelatedI have several local users on a F11 box. I want to keep one of those users from getting to the network. I could upgrade this machine to F12, if it offers a better solution.
View 1 Replies View RelatedI have a troubling networking situation that is compounded by the system being remote without any out-of-band mgmt in place nor a serial connection - but am relying on a coworker entering commands into the terminal for me, or doing stuff in the GUI I have an FC12 i386 install running, that was up and stable for 6 days. Primarily this was only being used for a deployment of nTop. Up through Monday evening, I was connecting to the system (in NY) via VNC (here in SF), and was successfully watching nTop do its thing.
Tuesday morning, I go to connect to SSH and I can't get in. The NAT translation is still in place on the firewall, but there is no connection to the NIC/eth0 from the router. This is what I've had my coworker run:
[code]...
I was going to try and have her run the /sbin/mii-tool eth0 tomorrow a.m. just to verify that the interface isn't physically bad? But this is a brand new desktop, and I can't for the life of me understand why this interface went down. I also have the internal IP on a DHCP reservation, which is the same IP listed in IPADDR in the ifcfg-eth0 file - could this be a problem? should I remove the DHCP reservation? I did this so I could SSH to a public IP which I have NAT'd back to the internal 10.0.x.x address I had my coworker take a look at the GUI, and the eth0 properties are "inactive" and the "Activate|Deactivate" buttons are greyed out.I suppose I can have my coworker grab the /var/log/messages and copy to a USB drive, then email me that from another workstation.
Our F14 server is looses access to the network once we set a static IP.The same IP, if used on any other pc works fine.We had the same exact setup in our F10 server also.
View 9 Replies View RelatedI have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:
Code:
eth0
|<--pppoe connection
|
MyComputer
(fedora 10)
|
eth1
|
switch
|
comp.1 comp.2
Win OS MacOS
I have a wired lan at home with 2 XP boxes connecting to a router to a DSL modem. I want to network my laptop, running only fedora os, for file sharing, printing and internet access. I will be using the laptop probably exclusively for creating/maintaining a Drupal-based (LAMP) e-commerce site to replace our old one for our small family business.
View 4 Replies View RelatedI am unable to access wireless network from my notebook. My configuration is Dell i5, 4GB RAM and 1397 W-LAN and I have F13. I can still access Internet through Ethernet using a LAN cable but the network monitor doesn't show list of Wireless networks which my room mate's windows 7 machine easily detects.
If anyone needs more info please provide me the steps to perform to find that out
I am trying to tunnel through my college's free AP so I can get access to protocols outside of http and https. The school has an in-browser DNS redirect until you log in.The output of "cat /proc/version" on the server OS is "Linux version 2.6.35-27-generic (buildd@palmer) (gcc version 4.4.5 (Ubuntu/Linar o 4.4.4-14ubuntu5) ) #48-Ubuntu SMP Tue Feb 22 20:25:29 UTC 2011" The client OS is Windows 7. What I have done so far is use Proxy Cap to redirect applications to a Putty tunnel connected to the server. Eventually I want to tunnel that SSH connection through my school's firewall, so that I can keep encryption and have a reasonable amount of ease with setup.
I am not particularly educated on the inner workings of the DNS redirecting so I was not sure what to search for. My attempts to connect Firefox over normal http proxies failed and since all ports are blocked besides http and https I didn't attempt any socks or SSH. I have also tried simply hosting the SSH server on http ports with little success. I hope that I can do this without having to purchase a domain, but that's starting to seem like that won't be the case.
I installed Ubuntu 9.10 onto my laptop, and having wireless issue. I was able to connect to wireless at home, but cannot at school. Then recently, I reformatted by desktop at home, and now I can no longer connect to my own connection. But yet, I'm able to connect to my neighbor. I considered installing ndisgtk package, but then i thought if I'm able to connect to some connections that means I'm not missing windows driver (maybe I'm wrong ).
View 3 Replies View RelatedI'm running ubuntu 10.04 on my laptop with broadcom BCM4322 wireless card.Basically what keeps happening is my wireless will stop working, then network manager will notify me that I have lost signal. It will then try and reconnect, but it never seems to be successful. The only way I can get the wireless to work again is if I disable wireless then re-enable wireless (or do a complete system restart).
However, it does not seem to have this problem at home. The only difference I can think of from home and school is either encryption types (the university uses WEP, I use WPA) or the fact that at home there is only one access point and at university there are multiple access points all with the same SSID.Anyone have any idea how to make my laptop stop dropping connection all the time?
Is there a software which can manage within a school of about 300 students: Students: notes by subject, quarterly averages, annual averages, the average of Contents Classes: the level and class name, head teachers
Teachers: classes held, the subject taught the above details are just examples.
I am using Ubuntu 10.04 LTS - Lucid Lynx(great interface!). But I am experiencing a very weird problem. The wireless internet works just fine at my apartment. But when I am in my school, it just stops working at all. It didn't use to be like that. It used to work in school too few weeks before. But I don't know what happened all of a sudden. I have checked with my school system administrator to know if there has been any change with the network. He said the network has always been the same.
View 3 Replies View RelatedAt home, I can easily connect to my home network with ubuntu. But at school, things are differently. The wireless security is tighter, and I need more then just my username and password to connect.
(See attachment for Screenshot)
The last two lines, okay, but I seem to need a certificate, and that MSCHAPv2, Anonimous identity. I don't understand what I need to enter in those fields. I only got a username and password from school and that's all I need for windows. So why does Ubuntu want/need more info?
i'am trying to configure Squid3 et SquidGuard on ubuntu Server 10.04 for a school. I'm new in linux, before i post this thread, I searched in the french forum and www. I found nothing to help me to resolve this issue. You can see below to configuration file from Squid3. which is stored in /etc/squid3/
[Code]...
I have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
View 1 Replies View RelatedI installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies View RelatedIm trying to dual boot Vista/Fedora 10 for school purposes. I have some linux classes on my required classes. Over the past 3 days Ive had one or the other booting correctly. My harddrive layout
Partition 0: Recovery
Partition 1: Vista
Partition 2: Fedora 10
Partition 3: Linux Swap
I have both of them installed on the harddrive. Im using EasyBCD 1.7.2 to manage the bootloader. Last time I installed Fedora I did not install a bootloader in the options. Everytime I do, Vista appears to load properly but then my Gateway recovery console wants to run and asks me to do a restore and of course after the restore Fedora dies in a sense.
So right now I have Vista working, Fedora on partition 2 and it will not load. Any ideas on where to go from here to get my Fedora partition bootable.
Can any outsider(from Public N/w) access my pvt. network.i.e. my clients of my subnet? If yes how ??and if no why?
View 1 Replies View RelatedI setup this ubuntu 9.10 server (32bit), at first I did DHCP and it gave me an address, I updated and downloaded most of the packages I needed at that time.
I switched the IP from DHCP to static IP and now I cant access outside my network. with ping or to download packages. I can however login via ssh over my network.
The only changes I made were the hostname and the static IP
This is my /etc/network/interfaces
Code:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
[Code]....
I purchased an Acer Aspire 7745G yesterday and installed Ubuntu as soon as I opened up the computer.
There appears to be a big problem however. Neither the wireless nor the LAN / ethernet are working.
'ifconfig -a' gives two items: lo and pan0. I believe pan0 is the bluetooth.
The wireless icon at the top right says "No network devices available". Network Tools shows the same results.
If I plug in an ethernet cord, nothing happens.
This is a fresh Ubuntu 10.04.1 downloaded this morning from ubuntu.com. I tried installing three times (USB, CD, DVD) including data checks on the disks. Same problem all three times.
I am guessing this is some kind of driver issue, but since I have no Internet access, I cannot do a Ubuntu Update and have Ubuntu find the drivers for me.
EDIT: The wireless and ethernet are working in Windows 7.
I am currently connected in a LAN, where naturally I can see in the network folder the machines connected to the LAN. Yet I need to access the LAN that exists at the WAN side of my router, see the machnes connected at it, etc. Is there a away to do it?
What I need to do is use a shared printer outside my lan, yet I need to see what IP it has in order to add it in my printer list
I'm having all sorts of problems connecting an access point to my computer, but here is one piece that I hope will get me going, if I can get it solved.My computer has two network interfaces, eth0 and eth1. eth1 connects to the cable modem and thence the world, and works fine. eth0 is supposed to connect to the access point over a private network. Here is the output from route with my IP address blotted out:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
[code]...
I recently installed Xubuntu 10.04 on a desktop computer. Everything works fine aside from the fact that I can't access my Dell 3010cn network printer. The printeis accessible and work flawlessly with every other computers running XP, Vista and Ubuntu 9.10I installed the drivers and configured the printer with the exact same parameters as on my 9.10 laptop. The thing is that the printer is always "offline" as if my computer could not connect to it. Also, when I try to acces its options via its fixed IP adress (192.168.1.107) through Firefox, I cannot reach the printer. However, the printer responds to every other computer in the house.What am I doing wrong? Is there a firewall in 10.04 that keeps me from accessing to the printer?
View 1 Replies View RelatedI can communicate to Windows perfectly (Internet sharing, file sharing, printer sharing, etc), but Windows controls everything, and I can't access any other Ubuntu PC, or host a printer or Internet connection. I have been fighting Samba for quite a long time, and I finally am able to access Windows shares from Ubuntu, but I want to host the shared folders (and everything else) on Ubuntu instead, because I have a bigger HD on it, and it is just a faster computer.
I tried personal file sharing and shared folders, but it doesn't work. I am also not able to access other Ubuntu PCs in the network, for printing, remote desktop, or file-sharing. All the computer are connected to the same Ethernet router. I'm using XP Home SP3, Ubuntu 10.04 x64, and a laptop running 11.04 beta 2.
