i'am trying to configure Squid3 et SquidGuard on ubuntu Server 10.04 for a school. I'm new in linux, before i post this thread, I searched in the french forum and www. I found nothing to help me to resolve this issue. You can see below to configuration file from Squid3. which is stored in /etc/squid3/
[Code]...
I actually have a server and a client.The client must connect to the server (via internet) to access to external websites. (You can see the attachment, maybe it's more clear )My actual problem is, I have configure Squid on my server, but I want to force SSL for the connection between the client and the server.I didn't really find nice tutorials about on that, maybe someone have an idea ? Or maybe some indications ?
View 1 Replies View RelatedI have a squid3 on a debian lenny box but cannot get access to any site.
If i remove the http_access deny all works, but i just want those ip to get access to squid
My squid.conf
Code:
intranet:/etc/squid3# cat squid.conf
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8
#acl all src 0.0.0.0/0
[Code].....
I am putting together a server and computer lab at my school for Standardized testing, and am planning on using debian for it. But first, i must prove to the school board that this is a possible and viable option, so right now it is one pc with 1 gig ram (Going to be the server for this experiment), and two others with around 512 mb ram.the problem with all this is, the computers in the lab cannot have hard drives, as there is some sort of licencing issue. So I need to be able to have these two testing computers boot from the server's hard drive.
View 14 Replies View RelatedI am trying to tunnel through my college's free AP so I can get access to protocols outside of http and https. The school has an in-browser DNS redirect until you log in.The output of "cat /proc/version" on the server OS is "Linux version 2.6.35-27-generic (buildd@palmer) (gcc version 4.4.5 (Ubuntu/Linar o 4.4.4-14ubuntu5) ) #48-Ubuntu SMP Tue Feb 22 20:25:29 UTC 2011" The client OS is Windows 7. What I have done so far is use Proxy Cap to redirect applications to a Putty tunnel connected to the server. Eventually I want to tunnel that SSH connection through my school's firewall, so that I can keep encryption and have a reasonable amount of ease with setup.
I am not particularly educated on the inner workings of the DNS redirecting so I was not sure what to search for. My attempts to connect Firefox over normal http proxies failed and since all ports are blocked besides http and https I didn't attempt any socks or SSH. I have also tried simply hosting the SSH server on http ports with little success. I hope that I can do this without having to purchase a domain, but that's starting to seem like that won't be the case.
I've setup Squid3 running on Ubuntu 9.04 64-bit server, and configured it to act as a transparent proxy and setup my router following these instructions: [URL]
Everything works great as far as browsing, but my main goal was to cache large downloads (usually executables) that I download frequently. So I set the minimum to 300KB and the max to 100MB. The problem, though, is the cache is not being used. I can download a file at regular speed on one computer, and then try and download it again and it downloads from the internet again, rather than the cache, so the speed is no faster.
Here's my config file:
Code:
#Recommended minimum configuration:
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8
[Code].....
My home LAN (6 computers) is connected to a Dlink 624 router (192.168.0.1). All machines have DHCP addresses exception of the Ubuntu 10.10 box which has 2 NICs (192.168.0.198 and 192.168.0.199) with static IPs.
I've been spending hours reading stuff on Squid3 and I can't make it work, the client computers won't connect to the Internet.
What I'd like to do is a simple Squid proxy to cache the websites I access the most.
Would someone have in hand a squid.conf file compatible with my needs or suggest me another proxy product (with a GUI if possible,)?
I have Squid3 running and SARG for producing report. I would like to see the hostname being logged in the access.log file instead of the client IP address. I have already set the option log_fqdn=on and it doesn't do it. I still see the client IPs in access.log files...
View 4 Replies View Relatedi hav 2 laptops but there is only one LAN port and i recently splitted them with my own router, the problem is the internet works fine, but i cannot access the schools's network e.g. my friend's shared folder in another room, the school's shared folder, etc. i can only access my own local router network.
View 7 Replies View RelatedI installed Ubuntu 9.10 onto my laptop, and having wireless issue. I was able to connect to wireless at home, but cannot at school. Then recently, I reformatted by desktop at home, and now I can no longer connect to my own connection. But yet, I'm able to connect to my neighbor. I considered installing ndisgtk package, but then i thought if I'm able to connect to some connections that means I'm not missing windows driver (maybe I'm wrong ).
View 3 Replies View RelatedI'm running ubuntu 10.04 on my laptop with broadcom BCM4322 wireless card.Basically what keeps happening is my wireless will stop working, then network manager will notify me that I have lost signal. It will then try and reconnect, but it never seems to be successful. The only way I can get the wireless to work again is if I disable wireless then re-enable wireless (or do a complete system restart).
However, it does not seem to have this problem at home. The only difference I can think of from home and school is either encryption types (the university uses WEP, I use WPA) or the fact that at home there is only one access point and at university there are multiple access points all with the same SSID.Anyone have any idea how to make my laptop stop dropping connection all the time?
I am trying to map to my schools shares VIA their network.
Normally on windows, I would just say Run and type the network path and it would open a window with the folders.
the path is \KNA11.XX.ON.CA you need to be on our VPN to connect to it, which I am.
How do i access this directory in ubuntu? And even better, make it a permanent shortcut or mountpoint so that i can easily access it later without having to re-mount it.
I am using Ubuntu 10.04 LTS - Lucid Lynx(great interface!). But I am experiencing a very weird problem. The wireless internet works just fine at my apartment. But when I am in my school, it just stops working at all. It didn't use to be like that. It used to work in school too few weeks before. But I don't know what happened all of a sudden. I have checked with my school system administrator to know if there has been any change with the network. He said the network has always been the same.
View 3 Replies View RelatedIn my university linux lab I have access to a linux network drive where I save programming code.I have ubuntu as a guest in virtualbox on my xp computer in my dorm. How can I map the linux network drive to ubuntu for use in virtualbox? I already have it mapped in windows, but can't get it mapped in ubuntu / virtualbox
View 1 Replies View RelatedAt home, I can easily connect to my home network with ubuntu. But at school, things are differently. The wireless security is tighter, and I need more then just my username and password to connect.
(See attachment for Screenshot)
The last two lines, okay, but I seem to need a certificate, and that MSCHAPv2, Anonimous identity. I don't understand what I need to enter in those fields. I only got a username and password from school and that's all I need for windows. So why does Ubuntu want/need more info?
I just installed Ubuntu on my laptop and I found that I cannot connect to my school's wifi network while i have no problem connecting using windows. Also I can connect to my home's wifi network. The details of the wifi network are as follow:
SSID: Universities WiFi
Authentication: WPA
Data Encryption: TKIP
EAP Type: PEAP (EAP-MSCHAPv2)
[Code].....
I have downloaded the certifate required and put it in my home directory and selected that .cer when setting up the connection But I still can't connect to it
I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines
Code:
And
Code:
eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT:
Code:
Code:
But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?
I have squid3 proxy and I want to define a default start web site that will be opened force only one time. Is something like it possible?
View 4 Replies View RelatedI am trying to set up my squid3 proxy as a transparent proxy - right now, I have to manually configure browsers to access via proxy. I understand that I have to put some rules into Iptables and also some further directives in the squid.conf.
I have a couple of specific questions. The proxy server is running on a Ubuntu 10.04 workstation and this machine also acts as a dhcp server for the network. I have just one subnet , namely 192.168.0.1-254 There is only 1 network card. Is it much easier to put in a second network card or is it just as easy to configure the existing lan card as a dual IP?
Is it necessary to configure these 2 IP's ( whether they are via 2 lan cards or dual IP on single card ) to be on different subnets. i.e ETH0 192.168.0.1 and ETH1 192.168.1.1 or is ok to have something like ETH0 192.168.0.1 and ETH1 192.168.0.254 ( where ETH0 is the one facing the LAN and ETH1 points to the modem router / switch i.e The Internet ) Where specifically do I save the Iptables rule configuration file and what must I call it ?
I have been using ubuntu for my college work for some time, and suddenly last week for ubuntu users in a specific Department/building lost the ability to connect to the internet through the school proxy.The problem seems to have effected only our department/building .
What is so annoying is even its the same computer we have internet if we use Windows but no internet for ubuntu.When using ubuntu the DHCP server automatically assigns IP's just as before, and we can reach the Default gateway using ping, but cant reach the proxy server. When we ping the proxy we get a message saying it refuses a connection. When using firefox or chrome we get the same message when we try to browse <proxy server not available>. The network guys says that the only change they did recently is to activate ipv6. But i fail to see how this can become a problem.
iam new user of linux and im trying to install dns server in fedora 12 and configure dns server by using gui tool.
View 1 Replies View Relatedhow to configure remote server....and how many maximum user loging remotely
View 8 Replies View RelatedI've installed 10.10 server edition on a box I just want to use for file storage/backup, uPnP server, etc. The area I need to put the box doesn't have ethernet as an option so I'm trying to get this wireless NIC configured. It's a Buffalotech WLI2-PCI-G54S which runs the Broadcom 4306 chipset. I've managed to get the drivers for the card installed via the instructions here: [URL]
The drivers are working properly as I can run
Code:
iwlist scan
and see all the wireless networks it detects. I found the info here: [URL] to complete the configuration, but I'm still unable to get it right. My wireless router is configured to use WPA2-PSK with AES. I could just try installing gnome and get the GUI network config, but would like to avoid that if possible.
This is probably an odd request, but figured I'd ask in case someone knew. We have a lab that has the IP range 172.10.0.0/16 (255.255.0.0). The lab gateway/DHCP assigns an IP in the range of 172.10.0.2-172.10.0.254. I want to set up my own DHCP server on a specific range, for example 172.10.10.1-172.10.10.254. I create a new host fine, but since it's set for DHCP, it uses the DHCP server at 172.10.0.1. Is there a way to force it to use a different DHCP server on the client side? I realize that I can work around this with exclusions on the 172.10.0.1 DHCP server, or use iptables to deny DHCP requests to specific MACs, but wanted to know if there was an (easier?) way to configure the client to use the 172.10.10.1 DHCP server instead of the 172.10.0.1 server?
View 1 Replies View Relatedhow to configure DHCP server on centos linux and how to configure FTP server on centos linux
View 2 Replies View RelatedHow I am configure DNS Client and server in Redhat Linux 4 in my lab.I have total 5 computers and they are Lan connected.I want to make one of them server and the others are client.
View 1 Replies View Relatedi have a commercial ISP connection with 5 IP addresses available and i want the following configuration note when i say domain group i am refering to a group of top level domains (not subdomains) owned by the same entity (company) with their A records pointed at the same public IP for a single server
[code]...
I try to configure a server at home on Ubuntu 10.04 (French Server)
I have 3 network :
eth1 for lan (IP FIX) 192.168.1.100
ppp0 for a vpn connection on an English Server (IP DHCP)
tun0 for openvpn i use it to connect to my French Server from Anywhere
I draw it here
My problem is when i activate my ppp0 connexion i can't connect tun0 because all port are redirect on ppp0 connexion (i can connect only when i'm on the LAN)
OF course i redirect the port of my IP Public to my French Server IP Private. If i don't activate the ppp0 connexion i can connect to my server with tun0 connexion from everywhere !
So i try do this redirection but it's not working and i don't no why ???
Code:
### Routing acces openvpn et vnc de la connexion ppp0 vers eth1
sudo iptables -t nat -A PREROUTING -j DNAT -i ppp0 -p udp --dport 1194 --to-destination 192.168.1.100
[Code]....
I have a dynamic IP connection. so i got hostname on [URL]. Now i want to configure a ftp server with that. I am choosing following options in the network configuration wizard:
1. default transer mode: passive
2. use server's external ip instead
3. get external ip address from the following address: XXXXXX.dyndns.org
4. ask opearting system for a port
5. test result:
[Code]....
i want to install and configure vpn server on centos 5.5 final i want to work it like that my server is in other city or country, i want to connect it in other city or country and want to use remote server internet on my computer.
View 1 Replies View Related