Ubuntu Networking :: Setting Up Network - Can't Access Any Other PC
Apr 23, 2011
I can communicate to Windows perfectly (Internet sharing, file sharing, printer sharing, etc), but Windows controls everything, and I can't access any other Ubuntu PC, or host a printer or Internet connection. I have been fighting Samba for quite a long time, and I finally am able to access Windows shares from Ubuntu, but I want to host the shared folders (and everything else) on Ubuntu instead, because I have a bigger HD on it, and it is just a faster computer.
I tried personal file sharing and shared folders, but it doesn't work. I am also not able to access other Ubuntu PCs in the network, for printing, remote desktop, or file-sharing. All the computer are connected to the same Ethernet router. I'm using XP Home SP3, Ubuntu 10.04 x64, and a laptop running 11.04 beta 2.
View 7 Replies
ADVERTISEMENT
Apr 2, 2010
I dont know were to begin to solve my problem and I have been googling for hours to get a hint without any success. I'm runnning a Counterstrike Server on my virtual openSuse server - I'm exploring so don't justify what I am hosting at the moment
I want to make it possible to gain access to the cstrike folde via a ftp login. But I really have no idea were to start. The server is also a webserver, where I can ass FTP accounts for my apache vhosts via plesk - but I dont think this is the solution of my problem, isn't it?
View 2 Replies
View Related
Sep 7, 2010
I'm trying to set my openSUSE desktop up to use the printers on my office network via Samba. I managed to get it working in 11.2 but 11.3 is giving me some trouble.I am able to access the printers and use them but I have to enter my network credentials each time I print. In 11.2 I was able to "save" my username/password and was not required to do this. Are there any Samba packages I need to add in addition to the basic ones? There seems to be a lack of documentation on this particular subject, most is concerning Windows clients printing on Linux print servers.
View 2 Replies
View Related
Feb 16, 2010
I've been trying to understand how Linux creates the network/interfaces on a machine (been reading the Linux admin guide), but as I'm pretty new to this subject, I've got lost in the forest.
To provide with my goal:
1.) Learn about network setups on Linux
2.) Be able to maintain my own (virtual) network
3.) Configure my (virtual) network
View 1 Replies
View Related
Jan 13, 2010
I have a Sonicwall access point, which I am able to set up through the interface, but after that I am unable to achieve a connection through my wireless card. I have a good understanding of everything involved, but really have no hands on experience when it comes to networking.
Code:
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
[code]....
Also, I should have mentioned that @ the interface for the Sonicwall it said that "no DNS server had been specified", but I set it up for DHCP, and I thought my ISP is using PPPoE (which I also thought used DHCP).
View 1 Replies
View Related
Nov 7, 2010
I'm trying to set up a wireless access point and router using Ubuntu 10.10. My machine has an Atheros AR5001X+ PCI card, and eth0 is connected to an ADSL modem.After literally days and days of going in circles, I'm hoping that somebody here can help get me on track.This sort of works, though I had to go through some other contortions to get the madwifi driver to finally compile on my machine.At this point, I can see and connect to the WAP, but nothing more. When I try "sudo /etc/init.d/networking restart",
I also have a second problem, which is that I want to use WebMin to manage this server, but I cannot figure out how to get the ADSL client module configured -- RP-PPPoE version 3. It seems to expect to work with pppoe-start, pppoe-stop, and pppoe-status, but when I try to run pppoe-status it says "Link is down", even though my ppp connection is actually working.Is is possible to use the WebMin ADSL client module with Ubuntu? I spent a lot of time trying to get pppoe-start, stop, etc. working but it was a complete mess and never seemed to behave. Finally, I just put the ppp startup commands into the /etc/network/interfaces file and that worked, but now the pppoe-* commands no longer seem to function.
View 2 Replies
View Related
Jan 15, 2010
Ive spent the last couple of days looking for a way to set this up and cant find the solution anywhere. Right from what iv read so far i understand i have to set the card to master mode but when i try
Code:
sudo iwconfig wlan0 mode master
i get the error
Code:
Error for wireless request "Set Mode" (8B06) : SET failed on device wlan0 ; Invalid argument.I read somewhere that the madwifi driver is up to the task but im still quite new to linux and not really sure how to change the drivers. this is what iv done so far
Code:
wget http://snapshots.madwifi-project.org/madwifi-trunk-current.tar.gz
tar xvxf madwifi-trunk-current.tar.gz
cd madwifi-trunk-r4108-20100115/
sudo make
[code].....
View 9 Replies
View Related
Jan 8, 2010
Setting up desktop (9.04) behind router for remote access by latptop (9.10) I am setting up desktop (9.04) behind router for remote access by latptop (9.10). Rationale: All of my files are on my desktop HD, but I am often out of my home needing to work on my files. It is becoming labour intensive to keep track of the files I make/change and try to copy them on my non-connected desktop/laptop.
Dream: Able to remote access and modify my desktop files from my laptop (while the files remain on the desktop). Request: A simple, GUI, basic, non-technical guide how to set it up!
What I know: 1.I was going to use the 'Remote Desktop' VNC connection under System->Preferences. However, if I understand this correctly, this only secures my computer (i.e. Locks the front door of my desktop) and the data streamed between them is not encrypted.[URL]..
2.Then I need to set up my router to accept the connection from my laptop.
3.Then I will need to use SSH to secure the info sent between them. This is the bit I don't really have a good grip on.
[Code]...
View 5 Replies
View Related
Aug 4, 2009
I have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
View 1 Replies
View Related
Apr 20, 2010
I'm trying Ubuntu for the first time; it's actually the first time I've messed with Linux at all-- and, well, it's kind of intimidating. One of my hobbies is playing with dead computers, and long story short, I have Ubuntu installed to a partition on an external drive connected to an older Dell desktop with no internal storage to call its own. The only network adapter I have to spare right now is the rather wimpy USB one that came with said desktop. I have the CD with the drivers to it, but I think the Linux drivers on it are for a different distribution. Am I going to need to scrounge up another network card or adapter, or am I going to have to start sheepishly asking ridiculous questions regarding basic operation of the command console?
View 4 Replies
View Related
Apr 28, 2010
I have two laptops with Ubuntu 9.10
I want to connect them with a wireless router. phillips snb5600 router.
So I can go online and share files with both laptops
My LG E500 laptop to function as a modem with a connection to the internet with a 3g usb modem.
There are built-in wireless LG E500.
My other laptop is an old webtech without wireless built in, but I have a wireless USB thing fully with snb5600 Router. Ubuntu can find the wireless USB thing. so it's not a problem.
Both laptops can also connect with the router with cable.
View 5 Replies
View Related
Mar 28, 2011
I recently purchased an hp 3050 printer because of it's wireless functionality. I found this (click me) where someone got it working. I tried to follow it step by step, but I couldn't get the ad-hoc network to work reliably.
I used the network manager to locate the printer's ad hoc network (it correctly identified it as ad-hoc) I then edited this connection, made it a "Link-local only" network in the ipv4 tab and then connected.
Usually what happens is that networkmanager claims that it has connected. I get a signal strength and everything, but I can't actually communicate with the printer. I entered the ip address (into firefox) given to me by asking the printer to print it's network settings, and I don't get a response.
Notice that I said "usually". I've tried this many times, and one time, I actually connected to the printer, got the browser interface, tried to use the interface to connect the printer to my wireless router, and failed (then the browser interface didn't work anymore [which of course would make sense if the printer tried to connect to the router, but I don't even know if I got far enough into the process for that to be the problem]). The printer does not show up as a device on my wireless router (my router has a list of all devices that are logged into it), so it failed somehow. I have never been able to duplicate that "success" again in spite of the fact that I've used the printers control panel to reset network defaults.
It seems that the people who were on the questions forum had no problem connecting the ad-hoc network. I kind of suspect that there is something wrong with the printer's wireless device.
PS: I noticed that hp-setup has an option to plug a wireless printer in via USB, set it up then it should work wirelessly, however, I couldn't get that to work with this printer.
View 3 Replies
View Related
May 23, 2011
I have 4 computers at home: 1 XP, 1 Laptop w/ Win7, 1 Mac, and 1 Ubuntu (hey, I like to try most everything). Anyway, I'm wanting to set up a home server to save everything on so that I don't have 3-4 copies of one file floating around. I was planning on using Ubuntu because I've always heard that Linux is a good system for a server and that Ubuntu is one of the easiest to work with.
Anyway, I just installed the Ubuntu OS, and the only software that I installed with it was Samba (I don't have a printer hooked up to this computer). Is samba the best software to use for this, or is there any other option that would be easier to use? I've heard that with samba there are a lot of things you have to change using the CLI (something about chmod, whatever that is, and others like it), which doesn't bother me, I've used CLI since the years before Windows, good ol' DOS.
View 6 Replies
View Related
Jul 4, 2011
I have 4 computers in my house, all with different OS's. (XP, Vista, 7, and Ubuntu) They would all be on Linux but haven't found a way to get my wife to stop using Windows. Anyways, I'd like to set up a home network to connect all 4 computers that would provide filesharing and print server. Does anybody know if this is even possible?
View 1 Replies
View Related
Jul 24, 2011
I am trying to set a fix ip address with network manager since my router is not able to set it in order to make port forwarding for aMule.I managed to set the IP address and also de primary/secondary DNS on network manager.My question is: should I set the same DNS on bot the router and network manager?More detail: my router has its own DNS's other than those of OpenDNS. At the moment, I left those DNS's on the router and set up the OpenDNS ones on network manager.Is it correct or should I set the same DNS's on both the router and network manager? In this case, would it be a waste of time since there will be a sort of "double requesting" to the same DNS? Or one of the 2 DNS settings overrides the other one (for example, just the network manager DNS's are considered)?buntu NattyKernel 2.6.38-10-generic #46-Ubuntu SMPNetwork Manager version 0.8.4~git.20110318t152954.9c4c9a0-0ubuntu1
View 1 Replies
View Related
Apr 3, 2010
I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies
View Related
Apr 15, 2010
I need help setting up network printers I have two computers, they both have ubuntu on them. The internet comes in to the first computer on a usb modem, it is routed out from ethernet to wireless. I used CUPS on computer two and printed out a test page that worked, but it won't print out anything else.
View 1 Replies
View Related
May 5, 2011
I am new to linux and just set up my wired network, still a few kinks that needs to be sorted out. When setting up a wireless connection, what is needed for a basic p2p network. Wireless connection from one laptop to another to enable sharing? What I have done was set up a wireless network on my windows machine, connect to it using ubuntu. (this is all done with the built in wireless adapters, no routers). The connection is made, both the windows and ubuntu machines say connected, but none of the computers show up in the networks directory?
View 2 Replies
View Related
Jan 6, 2010
have a home network with two desktops and I also have a netbook. The netbook and nettop (desktop) both run UNR 9.10 and my other desktop runs Ubuntu 9.10 with all updates in place. So all 3 machines are hooked up to my home network via wireless router (secure and password protect). I want to set up file shares between machines in order to move files between machines and also to have all machines connected to and accessing one shared printer. Fair enough. According to Ubuntu help I click on a folder, then properties then the share tab and click all checkboxes and give the share a name. Then I do likewise on my two other machines. So in theory once every machine has a share setup then you should be able to access via the other machines by simply going into Network, finding the machine, opening it and mounting the shared folder. In some cases I see the other machines but when I click to open them it says "unable to mount location". So now I would like to ask... where should I look to resolve this? The wireless router settings? Some type of network or security settings on each of my machines?
View 6 Replies
View Related
Sep 1, 2010
My work has got a new Sharp MX-1800N network printer. The setup requires user authentification, one password for printing b&w, another for printing color. However when they try to set up my netbook running ubuntu desktop 10.04 they don't get it to prompt for a password, which makes the printer reject the printout. How do you fix this?
View 5 Replies
View Related
Sep 13, 2010
I'm living at a friend's right now, and he's got a wireless access point in the house that I set my laptops wlan0 interface to route through the eth0 to my desktop. It's been working fine for internet sharing and internal networking ( ssh and ftp ) between the laptop and the desktop, but there's a problem with both subnets being able to communicate with each other, and I haven't been able to solve it with DNAT either.
The wireless access point is 192.168.0.1 and has its own lan on 192.168.0.0/24 of which my laptop is 192.168.0.5. I setup the little subnet I created by routing with the laptop to 192.168.1.0/24 and my desktop is 192.168.1.50. With shorewall I can configure iptables to DNAT all of my ssh traffic destined to 192.168.0.5 to 192.168.1.50, but the problem seems to occur when ssh on my desktop fails to connect rather than the DNAT failing.
Using iptraf I've seen that all of the routing does work properly, because I can see on the connection in iptraf that only the SYN packet is being sent from a 192.168.0.x address, there is no ACK packet sent back. I believe this is because in the connection dialog it always shows a 192.168.0.x ip as the source of the connection, but I don't have a route to 192.168.0.0/24 from 192.168.1.0/24 setup and I'm unsure of how to do so.
I'm pretty much in over my head because I don't know what is wrong, I thought it should work like this. Everything else from port configurations, to the configurations of the software itself seems fine so I don't think it's anything like that preventing a connection, but I can't think of what it would be aside from the lack of routing between each subnet.
Is there anyway to just add a route so that 192.168.1.0/24 and 192.168.0.0/24 can communicate with each other directly? I know there should be, I'm just not at all sure how it would be done.
View 1 Replies
View Related
Dec 24, 2010
I am a complete noob with computers, especially when Linux is installed.The problem is that when I plug in my wired network cable - it just dont connect. Writes "disconnected".I do not use a modem, just a single cabel.I think the problem is just in my knowledge which numbers where to wirte and which one to tick.May you please write what I should wirte ( IP, MAC or smyh)and shouldnt write mannualy and where. What to open and even the smalest step.
View 7 Replies
View Related
Oct 21, 2010
I know there are tons of help guides out there for this, and I have looked at and tried them all. I am trying to do something really simple, and just can't seem to get it working. I have been trying on and off for the better part of a week now, with not much luck. What I am tyring to do is have a Ubuntu 10.10 server serve out DHCP addresses and be the DNS for the local network. The local network will have no internet access, so it only needs to know the names of the local server. My network setup is as follows:
1: Windows Vista web server
2: Ubuntu DHCP3 and BIND server to give IP's and resolve local names.
3: A bunch of tablet computers connected via dhcp to the network, that need to access the web server on the Windows machine.
I have DHCP working nicely, but it fails to propagate the hostnames to the tablet computers. Unfortunately I need this to work, as the tablets do not have the capability of having a 'hosts' file.I have tried just about every self-help guide I can find, and just can't seem to get this work. Everything seems to work fine except for the name resolution. Any help would be great, I don't have that much hair left to pull out!
View 5 Replies
View Related
Oct 26, 2010
So I'm wanting to learn a bit more about networking (ok, ALOT more), and I was thinking of trying to setup a virtual network via Virtualbox on my desktop, and as seperated from the internet as humanly possible (preferably no connection whatsoever).
Ignoring a few of the obvious problems (like my little dual core potentially running half a dozen VMs on 2G RAM), I am wanting some guidance as to what programs I would need or some documentation on setting things up.
I have no real clue where I would want to start with this, but I want it as a testbed for future toying with, to learn from, and just generally as something for me to hack at to see what does what, how, and why.
View 6 Replies
View Related
Oct 24, 2009
I am trying to learn about networking and am looking to set up a mini network between three bare bones Centos machines in Virtualbox. I set up the machines with a static IP. In the Virtualbox I am using NAT and have the IPs as follows
Centos-1
IP: 10.0.2.15
Gateway: 10.0.2.2
DNS: 10.0.2.3
Centos-2
IP: 10.0.2.16
Gateway: 10.0.2.2
DNS: 10.0.2.3
Centos-3
IP: 10.0.2.17
Gateway: 10.0.2.2
DNS: 10.0.2.3
On all machines i can ping google.com, and yum updates, but I can not ping any other machine. It says they are unreachable. NOt really sure what to do. Any help would be much appreciated.
View 6 Replies
View Related
Jan 10, 2010
I would like to know if there is a fairly easy "How To" for setting up my home network. I have 2 XP SP3 computers and 2 Linux with ver. 9.10. The XP boxes can see each other and share files and folders. I can see from an XP box one of the Ubuntu machines, but can't access any of the files or folders.
I get the following when I try: \Lstoragemusic is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found.
View 9 Replies
View Related
Nov 15, 2010
I'm having issues setting up file sharing between two Linux machines. I've tried the forum cookie cutter answer of "right click folder, sharing options, share, allow others to write and edit, allow guest accounts", but I simply cannot get my two Ubuntu 10.10 machines to see each others shared files. I HAVE been able to download and use the program "Personal File Sharing", and with it I CAN share the "Shared" folder between both machines. I'd prefer to learn the correct way to link these two boxes up though, and be able to share more than 1 directory. Am I missing any programs to complete this link? Do I need to use Samba? I've tinkered with it, and I can get both computers to see a workgroup name I set up, but cannot get them to view each other in it.
View 9 Replies
View Related
Dec 30, 2010
I have a home network with Ubuntu (3 PC) Windows (XP 3, 7 1 vista 1) and Lacie networked drive. I have successfully edited fstab to mount the lacie drive at startup on my main ubuntu PC and it works a treat. My problem is setting up the Unbutu PCs to browse the workgroup. This was working but now (since my last update of Unbutu I think) I get prompted for a password and no matter what I do it does not let me browse.
Now I have read a few things on Samba and do not have the time or ability to become a network engineer. All I want to do is is have on my Ubuntu the same browsing ability that seems to come out of the box in Windows.
View 9 Replies
View Related
Jan 12, 2011
could set up a firewall on my linux machine? I have is to connect my router wired to the linux machine and then from the linux machine to my main computer, and obviously routing the internet connection through the linux box as a firewall. I use a Netgear DG834G router
View 9 Replies
View Related
Apr 11, 2010
I setup a windows comp to do ics but decided I needed more control so I am trying to use a linux comp. heres the how to I am trying to follow. [URL] I will have both windows and debian machines connected. the first thing is to get my daughters winxp comp connected to the internet since she needs it for school. I need a central server to control which comp accesses what. most of the windows comps will be passing through to the internet while my linux machines will be accessing each other. maybe later a samba share. but right now I only need proxy and dns. I would say doing it with windows was easy but I learned how to do that from posts on this sight and someone might remember them. I will say it is now easy to do windows proxy but I need to replace a active directory domain with something differant. servers is where linux should excel. heres what I get when I type route.
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
localnet * 255.255.255.0 U 0 0 0 eth0
default dslrouter.alban 0.0.0.0 UG 0 0 0 eth0
View 1 Replies
View Related
