Fedora Networking :: Access A Virtual Box Installed Fedora System?
Aug 1, 2010
How does one access a Virtual Box installed Fedora system? I'd like to be able to ssh into this system (locally) but I've no idea how to do this. There is an ip address of 10.0.2.15. Ping doesn't work (ping 10.0.2.15). Should I just go ahead and assign a 192. address to this box before I go any further? It would seem that at this point the system isn't actually a part of my local network and I don't imagine it would be unless it has a 192 address.
View 3 Replies
ADVERTISEMENT
Nov 10, 2009
in my network, users has total access to their PCs, so theres a problem to filter (URL, ports,etc.) their virtual machines installed (they can assign self any IP, e.g.)
Id thought about use the MAC prefix in VMware VMs (00:0c:29:*), but i can only found a way through DHCP, and this isn't a good solution (they can assign a static IP to workaround...)
It will be better using firewall (iptables), but I don't found the way to add rules based in MACs with wildcards.
View 2 Replies
View Related
Mar 24, 2009
How can I access shared Windows files from a fedora system
View 3 Replies
View Related
Jan 2, 2011
I'm trying to get wireless access on a laptop with freshly installed Fedora 14 32-bit, but I'm having some issues. I ran the diagnostics advised in this thread: [URL]..Here are the results:
Code:
[root@localhost]# lsmod | grep iwl
iwl3945 97265 0
iwlcore 160590 1 iwl3945
mac80211 188648 2 iwl3945,iwlcore
cfg80211 110951 3 iwl3945,iwlcore,mac80211
[Code]...
View 1 Replies
View Related
Aug 15, 2010
I am coming from Windows XP Pro, on the same machine (and where I am writing this post from) so the internet clearly works on XP. On F13, the eth0 connection is activated and the drivers for the NIC chip were installed with the OS. The NIC is Intel Pro/100 VE. The problem that occurs is that the system updater (in GNOME) can access the internet, and installed a bunch of updates after installing the OS. I know it can get to the internet because the updates worked and in the System Monitor, I can see both uploading and downloading occurring during the updates. Now the problem is that when I open FF, I can't seem to get to pages, and I get the usual FF error (pic -- [URL]). However, I CAN get to [URL] as well as [URL] , but I cannot access several other subdomains on fedoraproject.org . I also cannot get to any other page online, ([URL] for example).
View 8 Replies
View Related
Mar 10, 2009
Running Fedora 10, I installed CentOS 5 in Virtualbox, but I can't ping the Virtual Machine...
From within CentOS, I can ping my laptop [known as the host?] but from the laptop I can't ping the CentOS Virtual Machine. I tried turning off the firewall on both too... CentOS was able to access the internet through my laptop right away without any configurations too.
Unless someone has an idea to resolve the above, I am also wondering about something else VirtualBox-related:
To see if it was possible to get around the above issue, I was going to install another CentOS virtual machine to see if I can get them to communicate both ways [if at all], but to do so, I think I have to install CentOS AGAIN on another allocated amount of hard disk space. This will take some time, so I was wondering if anyone knew if it was possible to just create a quick duplicate of the previous installation, if you wanted 2 different virtual installations of the same OS.
View 2 Replies
View Related
Feb 1, 2009
loaded fedora 10 on my laptop.I get the runlevel 5 in the first one (CTRL+ALT+F5).nothing happens when I press the F2 through F6.
View 3 Replies
View Related
Dec 4, 2010
I have a Lenovo T500 laptop with 4 GB RAM. I have installed Windows 7 64bits OEM on my laptop HD. I also installed Fedora 14 on my USB External Hard Drive which it has it own boot sector. I don't want to have a dual boot. So if I plug in my external HD to my laptop and turns the machine on, it automatically my Fedora comes up, other wise my windows 7. (I set up start-up boot drive , first to USB External HD and then internal HD)
I installed KVM (Virtual Machine Manger) on my Fedora 14 and I am trying to install windows 7 64bits OEM on my Fedora 14 as Virtual Machine. After setting everything and start installing windows form CD, I got BLUE SCREEN right after "WINDOWS FILES LOADING..." finished. it shows me a blue screen and then it will stop
Questions:
1- How can I fix that problem?
2- Is ther way to make a Virtual Machine on my Fedora using my exiting installed windows 7 on my laptop HD?
View 2 Replies
View Related
Jul 1, 2010
I installed samba server in my external HDD. But it is not shown in system ----> Administration. Is there any problem. Then How to give permission to access home folder.
View 3 Replies
View Related
Apr 15, 2011
I am trying to access shared folders in Virtual Box with Host OS being Windows7 and Guest OS is Fedora. Did anyone face a similar problem? I have been going through many solutions but none of them worked out. I am able to keep the required folders in Shared Folders making them Auto-Mount and Permanent. I tried to install Guest Additions from Devices, but I am not sure how to install the Guest-Additions software in Fedora. how to proceed so that I can access files in my shared folder.
View 1 Replies
View Related
Jan 2, 2010
When you have a computer whose hard drive is partitioned with one part Windows and the other Linux, what are the concerns with viruses and transference across the two systems? Can viruses infect the windows side brought over through the Linux side (Firefox) or are the partitions completely separated? In other words, if all of your Internet voyages are through Firefox under Linux, is there any danger of infecting the Windows side of the computer? What about when having Linux installed within the Windows portion as a virtual system?
View 2 Replies
View Related
Jul 15, 2010
I have installed linux on a virtual machine in Oracle VM VirtualBox because I want to run linux while running windows at the same time. I was wondering if there is any difference between a real linux system and a virtual one for learning purposes.
View 5 Replies
View Related
Aug 1, 2011
My questions begin with Virtual Box. I have Windows XP installed via Virtual box. Ordinarily, I hate everything about windows, but unfortunately some things related to my job I am still in need of having some access to some form of Windows. I am wanting it to recognize all of my multiple hard drives that are installed on this system, 4 of them to be exact, so that I can utilize files from all of them.
View 3 Replies
View Related
Sep 8, 2010
I have just installed fedora 13 onto my old PC. Everything is great apart from the fact that i cannot access the internet. My isp is TalkTalk, they do not support linux, and have suggested that i contact the Geek squad who might be able to help me for the princely sum of �30. i think that all that i need is the ip address for my Isp or something equally simple and my problem will be solved. failure to resolve this issue means that i might have to go back to windows.
The machinery that i have is an emachines 3210, 2.70 GHz, a Dlink wireless router, i am using a cat 5 cable plugged directly into the back of the pc, i am using fedora 13. ps my son is using windows and is connected to the internet still via WiFi.
View 5 Replies
View Related
Nov 14, 2010
I just installed Fedora 14 and I want to access my hardware info. In Windows I could get system info such as cpu type, speed, stepping, memory, graphics card, etc.
View 4 Replies
View Related
Feb 9, 2010
I've not been able to find a solution on the forums, so thought I'd post. My DELL PC came with Vista installed and I then added Ubuntu. This seemed to work fine although I didn't really use Ubuntu too much. Then last week I decide to replace Ubuntu with Fedora 12. I selected the replace existing Linux option during the install process.
After installation, Grub displayed 2 options: Fedora and Other. Fedora was fine, other didn't boot. After readinf around I added another option for vista, but this results in the following error:
Error 13: Invalid or unsupported executable format
fdisk -l returns:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x50000000
[Code]...
View 7 Replies
View Related
Feb 28, 2010
I am trying to install Fedora 10 on an old P3 Inspiron 5000. When I boot from the Live cd the screen is split into three sections and is hard to navigate. I am able to edit the /etc/X11/xorg.conf file and log out and log back in to proceed with the installation. The problem is when I finish the installation and reboot to the new OS it boots to the triple section mode again because my xorg.conf is not edited. To do any commands in Fedora I need to get through a brief user setup in which I cannot navigate through until I can see the screen better. Is there a way to boot to a graphical type safe mode so I can see the whole screen to finish the installation?
How can I access folders from the live cd to edit the installed files? This way I can edit the xorg.conf file before booting and all would be legible.
View 6 Replies
View Related
May 12, 2011
I installed samba server on fedora13 last week and share some files from samba server GUI i also created samba user and password for shared folders but I can't get access samba share folder from neither fedora machine nor Windows XP When I open samba share from other fedora such as smb://192.168.10.2 I can see share file and when I browse folder, password required box is appeared but after I put samba username and password the Error message is Unable to mount location Failed to mount Windows share even when I browsed samba share from windows xp error message is \192.168.10.2smbshare is not accessible. you might not persioon to use this network resource. Contact the administrator The network path was not found.
[Code]...
View 2 Replies
View Related
Jan 10, 2009
I prefer moc player as my main mp3 player but i cant get it installed on a fedora system. Unmet dependencies.Is there anyone out there using this player on FC10?
View 14 Replies
View Related
Feb 5, 2010
I installed Fedora with some useful programs for my job. I would like to make a live cd (or dvd) of my system (with programs and repositories list), so I can install it to 5 other computers I have.I found revisor but I think it's not what I'm searching.In Ubuntu I was using Remastersys and that's what I want to do of my system.Since I'm new, if it has a graphical interface, it would be nice. If not, then just explain the terminal commands.
View 4 Replies
View Related
Jan 8, 2009
I am using F10 desktop edition, all the computers using windows are able to access the shared folders over lan except me using F10. I have tried many things with smb but still unable to connect.I am new to linux so i dont khow much of its technicalities.kindly suggest how can i be able to access the shared documents ..
View 1 Replies
View Related
Aug 17, 2009
Linux OS : Fedora 10 (No graphical mode)Windows OS : XP and Windows Server NT...I am able to access from my windows to linux using following step//fedora10 ip username of admin and password...I am able to view the admin and shared printer of fedora 10.When i try to enter in the admin folder i am not able to access it. It is giving error "Access is denied".
View 6 Replies
View Related
Oct 2, 2010
how to check where an application gets installed on my system!!!
View 14 Replies
View Related
Feb 19, 2011
I am running the 64-bit version of Fedora 12 on an Intel system. I want to run a particular application that is only available in 32-bit.
How can I get the needed system libraries installed so I can run the application?
View 14 Replies
View Related
Jan 22, 2010
I have a RHEL 5 installed. I boot using a Linux preboot CD and take my machine into preboot. Now, in preboot, how should I detect that on which drive ( e.g. sda1/2or hda1/2 etc ) my RHEL5 resides?
View 5 Replies
View Related
Dec 27, 2009
I've lasted a lot longer than usual before resorting to asking around, but I've finally gone delightfully mad. I've been trying to access shares based on Windows 7 Ultimate with limited user access on said shares. I've managed to get into my XP machine, another mate's Vista machine and various Linux boxes with no issues, but that's only for shares that are accessible by everyone. The moment I try to get into a share that requires user credentials, I get "Error returning browse list: NT_STATUS_ACCESS_DENIED".If I try to access restricted shares (be it machine or folder) through Nautilus, I will get a user logon prompt, but it fails. Using smbclient results in just as little success, and now I'm munching through O'Reiley's Samba manual from '99, after realising that I need to basically learn Samba in its entirety to have a hope in hell at getting this to work. The trouble is though, every HOWTO and relevant forum post I get my hands on all seem to concentrate more on the server side of things, and usually servering from a linux box, not the other way around as I'm trying to.
The above Windows 7 machine won't even allow me to view its share contents, whereas the XP machine previously will allow me to browse, but won't allow me to access folders with restricted access. I'm pretty sure there aren't any major issues with the way the Windows 7 machine is setup, as it can be accessed with logon from my Xbox, Ubuntu machine, XP and Vista, with only Fedora having problems getting in as it constantly fails logon. What I'm trying to establish is, if Ubuntu can get in, is there something in my Fedora samba config I'm missing that's preventing me access? My thanks in advance to those of you who've been able to put up with me rambling.
View 8 Replies
View Related
Feb 12, 2011
I have been trying to use my DS2490 USB to serial device with a Maxim .DG1921G thermocron with owfs. It is supposed to give me access to a virtual file system for the thermocrom without needing to launch owfs as root.
Code:
/var/log/messages gives:
Feb 8 16:22:45 norman-HP-G56-Notebook-PC kernel: [ 236.140141] usb 5-1: new full speed USB device using ohci_hcd and address 2[code]....
but if ds2490 module is loaded it works when run sudo.It seems from this that it is a lack of permissions to USB but I have tried all the methods on at http://owfs.org/index.php?page=udev etc. to overcome this and a few others but none work.I am running Ubuntu 10.10 kernel 2.6.35-22-generic #33-Ubuntu SMP
View 1 Replies
View Related
Apr 20, 2011
Recently I have installed FC 14, I need to know how many packages installed through YUM command prompt in local system.
View 2 Replies
View Related
May 22, 2010
I have installed fedora 11 and I have installed on it hosting control paneland for a week the server was working fine for no reasonI have regulated control panel and I have added other functionswhen the hosting control panel was turned off, I have turned off the serverNext day I have turned on a server again and fedora 11 started to go onbut some window where the log in has to be does not appearinstead that window I saw a black screen with the cursorand around the cursor the revolving thingI have tried for several times to load it- it does not workWhat can it be and how can that be fixed
View 14 Replies
View Related
May 20, 2009
Well i started out with installing fedora on my USB stick. I have now installed Fedora on a intern hdd. How can i access ALL the files there's on the usb? They are both Fedora 9, and i know the password for root on both systems.
View 5 Replies
View Related
