General :: Installed Fedora 12, Now Can't Boot/access Vista?
Feb 9, 2010
I've not been able to find a solution on the forums, so thought I'd post. My DELL PC came with Vista installed and I then added Ubuntu. This seemed to work fine although I didn't really use Ubuntu too much. Then last week I decide to replace Ubuntu with Fedora 12. I selected the replace existing Linux option during the install process.
After installation, Grub displayed 2 options: Fedora and Other. Fedora was fine, other didn't boot. After readinf around I added another option for vista, but this results in the following error:
Error 13: Invalid or unsupported executable format
fdisk -l returns:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x50000000
I installed Ubuntu 10.10 on my PC running Vista Home Basic. I installed to run as a dual boot but now I can only boot into Ubuntu. I have tried to run the recovery disk for Vista and it errors out also..
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
I have installed ubuntu 11.04 using wubi with Windows Vista Home Premium 32 bit. The operating system works fine. Althoughwhen I boot and choose linux I get an error message during boot which stays forever. I have to shut down using power button and start again when it boots fine.
Another problem is when I restart from ubuntu it restarts back to the desktop but when I shut down, it does not shut down the computer. Stays on with blank screen forever. I am attaching the image of latest error I received on boot.
I had Windows Vista Business in my compaq presario CQ40-145 TU laptop, over which I installed Fedora 13, making the system dual boot. The Windows is set to be the default OS. Now I want to replace Vista with Windows 7 professional without affecting Fedora. As far as I understand, during boot up, the system enters Fedora's booting process and then gets redirected to Windows, and it is not directly windows even if the default OS is windows.
The reason behind not disturbing fedora is the updates, extra software and packages installed and the pain and time it took me to make my speakers, wlan and flash player work in it. I even don't remember the exact process of what I did. I don't have now so much time to search for it again. So I will take up only that way in which Fedora is not affected at all. And the second problem is my DVD drive is not working at all. So I'll like using USB stick for the same.
When I run out of space on my Ubuntu partition, which will probably happen with me being the untidy person I am, is there a way to resize the partition in Windows or Ubuntu that will allow the other to boot? As I've heard stories of using Gparted to resize a Windows partition doesn't allow Windows Vista to boot up as it removes a crucial part of the operating system? I have adequate space to give to Ubuntu on my NTFS partition. May I also add that to install Ubuntu I had to use the partitioner that came with the installer, because the Windows Disk Manager wouldn't let me partition the NTFS drive, because it Denied my Access.
I have just installed fedora 13 onto my old PC. Everything is great apart from the fact that i cannot access the internet. My isp is TalkTalk, they do not support linux, and have suggested that i contact the Geek squad who might be able to help me for the princely sum of �30. i think that all that i need is the ip address for my Isp or something equally simple and my problem will be solved. failure to resolve this issue means that i might have to go back to windows.
The machinery that i have is an emachines 3210, 2.70 GHz, a Dlink wireless router, i am using a cat 5 cable plugged directly into the back of the pc, i am using fedora 13. ps my son is using windows and is connected to the internet still via WiFi.
I just installed Fedora 14 and I want to access my hardware info. In Windows I could get system info such as cpu type, speed, stepping, memory, graphics card, etc.
I installed LinuxMint to an external hard drive and had vista on my interal drive. After doing this, the only way my computer would boot up was if I had the external drive plugged inThen I accidentaly dropped my external drive and broke it. I decided to just install Fedora 11 onto my internal drive primarily because I figured it would would still be able to choose windows from the grub screen, but now there is no option for windows in grub. My other problem is that Fedora wont recognize any liveCDs that have tried to run from other distros (eg. LinuxMint7, Open SUSE)
I installed Oracle Linux 5 and now I can not boot into Vista. However if I use Debian Live CD Vista is there and looks fine (as far as I can see). Is there a way I can use a live CD to fix grub? I have googled it but none of the commands I found worked.
I installed samba server on fedora13 last week and share some files from samba server GUI i also created samba user and password for shared folders but I can't get access samba share folder from neither fedora machine nor Windows XP When I open samba share from other fedora such as smb://192.168.10.2 I can see share file and when I browse folder, password required box is appeared but after I put samba username and password the Error message is Unable to mount location Failed to mount Windows share even when I browsed samba share from windows xp error message is \192.168.10.2smbshare is not accessible. you might not persioon to use this network resource. Contact the administrator The network path was not found.
So i'm VERY new at this, i need fedora for this research i'm starting. I have a dell and vista was installed on it, then i installed fedora 10 like it said on the fedora site from a boot disc. Now i have fedora but i don't have vista nor access to the memory it took up. I tried to restore to start over but i can't, and i need vista back.
Normally i would restore from the 10 G partition dell sets up for recovery but i'm not able to get to it, and i don't have my vista discs they're back at school.
I have installed fedora core 9 with a successful installment but the GRUB is not loading Vista BOOT MGR is Missing root chain loader +1. Booting Other does not load.
I have installed Fedora 13 and Vista 64 in Dell Studio desktop. In the Vista, the machine is quiet, but in Fedora, it is quite noisy. I checked running processes, I am not seeing anything to do with PC fan.
i've fedora 15 & windows vista installed on hard disk partitions.i can access windows files from fedora but how to view fedora files when i'm working on windows???
vista was deleted there is no dual boot i see grub loading when reboot how can i uninstall ubuntu, i tried doing a boot from cd with recovery disc but get error oxd0000017 what to do now.
got a laptop of hp with amd neo m40 pro and 2gb ram.. with vista installed.the worst OS.... i want to install linux with dual boot since am not expert in linux.these are the specs:
hard disk is 250 gb c-155gb , d which is for recovery is 10.6gb, e-46.8gb and an unallocated disk of 20gb
tried to install fedora which couldnt recognize the hard disk partition got ubuntu and tried.. but i dont know where it got installed now my 20 gb unallocated disk is showing as two partitions one of which is 1 gb and the rest is 18gb. how to uninstall ubuntu now. i want to repartition it and install it in proper way is 20gb enough.
I installed fedora 12 as second os along with ulimtate vista on 64 bit machine.
I was able finish the install and boot to fedora first time. but after updating the software , i am unable to boot into fedora but am able to boot in to vista.
I am using a HP Pavilion HDX9000 notebook series. it has 2 100gb hdd. vista is on c and fedora is on d. boot info was written to MBR on C drive.
I have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
I have been trying to get my Toshiba L300 to dual-boot Fedora 12 and Vista, which it came pre-installed with. I shrunk my existing partitions to create some unallocated space, then installed F12 on it from the 64bit Live CD. Everything seemed to go fine, and I was able to boot into Fedora as normal. However if I tried to boot into Vista, I would get a message to the effect of:BOOTMGR is missingRather annoyed but undeterred, I decided to cross that bridge when I came to it, and went back into Fedora to start configuring it properly. I installed the latest version of WINE, and the mp3 support, then shut down. When I tried to boot into Fedora later on, everything started as normal, then it hung on a black terminal style screen, where I can type and press return for a new line, but nothing actually happens. Pressing ctrl-alt-del restarts the computer however.
To get out of this no-working-OS-limbo, I had to break out my Vista recovery console and run fixboot. This has got rid of the bootloader and now Windows starts up fine, but obviously this does not solve the problem of not being able to boot Vista while Fedora is also installed, and not being able to run Fedora presumably (but not for certain) after I have installed WINE
iam new to linux i installed fedora 10 on windows7 ultimate 64bit after intallation the fedora system doesent boot, but windows7 work properly. i instlled fedora 10 in seperate fee partiotion
I installed fedora 10 on my laptop as a partition with vista. However i'm now not able to boot into my vista partition as everytime I try it comes with an error saying "bootmgr" is missing. Below is whats in my grub.conf file. However I am able to access my vista partition through fedora.
I have a PC with two 40 Gb hard drives. Vista is currently installed on drive 0. Nothing is installed on drive 1. If I switch cables to the drives, Vista will be installed on drive 1. Nothing will be installed on drive 0. If I then install Fedora 10 on drive 0, will it automatically detect Vista on drive 1 and allow me the option of using Grub or something else to boot it? I want to avoid having Vista overwrite my MBR, but I don't want to piss my wife off because she can't access windows for two weeks while I figure out how to customize Grub or install something else. If I need to customize Grub, (or some other boot loader), I would need step by step instructions. Is there a book or online tutorial?
I just installed Fedora 12 on my Windows Vista machine.Now when I boot my computer it shows two optionsFedoraOtherThe `Other` one would be Windows Vista.Its okay if I boot into Fedora, but if I boot into Vista, I get the following error:
Code: BOOTMGR is missing. Press CTRL + ALT + DEL to reboot.
I just installed the Fedora12 on my laptop, on which originally thereas only one partition with Vista before. I resized the Vista partition and made a free space and installed Linux on it.Fedora works fine, but when I try to boot Vista, it opens the system recovery options menu, without being able to do anything. After the end of each option it boots again, giving the two options between Linux and "other" and if I choose "other" it goes back to the recovery menu.
I have a laptop running windows vista already and I need to run Red Hat 7.2/7.3 or Fedora Core 1 on there as well. I am in the process of downloading Red Hat 7.3. I haven't done this before so I'm wondering if there are any guides out there that detail how to set this up to dual boot? Is Red Hat 7.3 a better option over Fedora Core 1?
I had installed Fedora 13 on an unused partition of my ATA hard-drive yesterday. The primary OS here was Windows Vista.
Anyway, everything was working fne for coupla hours after which I had to restart F13 for some reason. This is when all the trouble began ..
Fedora wouldn't boot cause of some "power issues" - there were none. Windows Vista wouldn't boot because "BootMGR was missing"
I figured if I removed Fedora using the live CD - format the partition, it would help. It didn't. Well, atleast the partition got formatted. I tried re-installing F13 from the live CD but it doesn't finish the process - saying a command, something to do with 'shutdown' is not valid.
I tried repairing Vista from the Installation DVD but it is unable to do so.
Right now, on rebooting the computing, I enter the 'grub' console. I tried using grub commands to boot "Windows" from the (hd0,0) partition like thus,
Code: grub> rootnoverify (hd0,0) grub> makeactive grub> chainloader +1 grub> boot But it still maintains that "BootMGR is missing" .
I'm having trouble getting my computer to dual boot between vista and fedora 10. I 'know' that both are installed, but only 1 will boot at any given time. for instance, i've been using fedora 10 for a few months now, but only this os will boot from the grub menu. to boot vista, i need its install dvd, where I choose the command prompt, and then 'bootrec /fixBoot', 'bootrec /fixMbr'. After this, Vista will boot fine, with all of my data files untouched, but now Vista is the only option that works.
To get back to Fedora, I need its installation dvd, where I go through the motions, and choose to update an installation. Again, now Fedora is the only os that works. I would like to have them both just work, but all I can do is a 'faux' install with the dvd of whichever one I want.
