General :: Samba Server Installed On Fedora13 But But Can't Get Access From Other Fedora And XP?

May 12, 2011

I installed samba server on fedora13 last week and share some files from samba server GUI i also created samba user and password for shared folders but I can't get access samba share folder from neither fedora machine nor Windows XP When I open samba share from other fedora such as smb://192.168.10.2 I can see share file and when I browse folder, password required box is appeared but after I put samba username and password the Error message is Unable to mount location Failed to mount Windows share even when I browsed samba share from windows xp error message is \192.168.10.2smbshare is not accessible. you might not persioon to use this network resource. Contact the administrator The network path was not found.

[Code]...

View 2 Replies


ADVERTISEMENT

General :: Fedora13: VNC Not Installed After Installing Via Yum?

Aug 26, 2010

On a fresh Fedora 13 install, I have done:su yum install vncand:su yum install vnc-serveryum installs tigervnc and tigervnc-server with no errors. However, when I go into /etc/sysconfig/ to edit vncservers, vncservers does not exist. Also, there is no vnc service listed in the services, and doing:sudo service vncserver restartreturns the message:vncserver: unrecognized service

View 2 Replies View Related

General :: Can't Access Samba Server From Windows Xp?

Nov 26, 2010

I have just configured samba on suse linux. I can see it in the windows workgroup but i cannot access it. When it says the server is not accessible. You might not have permission to use this network resource.I have attached a copy of smb.conf

View 2 Replies View Related

General :: Samba Server Asking Password When Access Sharing

Apr 3, 2010

I have just configured samba and it is working fine, the only problem that i have face when i go to access some sharing on samba server it asking me about password but the problem is that its username option is embossed. By default it will login as guest but i dont know the guest password.

View 1 Replies View Related

Server :: Samba And VSFTPD / Create Folder Rights That Samba And Ftp User Will Have An Access To All Directories?

Oct 20, 2010

I would like to configure an access to folder

/fileserver

for two services : Samba and VSFTPD

How to do it ? How to create folder rights that samba and ftp user will have an access (read/write/delete) to all directories in /fileserver.

My system is CentOS. I`m starting samba and vsftpd like a root (/etc/init.d/vsftpd start etc.)

View 1 Replies View Related

Debian :: SMBClient Not Installed But Can Access Samba Share

Apr 13, 2010

How come I can access samba share, and windows workgroup computer and don't have any samba package installed? Sudo aptitude show smbclient says not installed. Sudo aptitude show samba says not installed.

View 2 Replies View Related

General :: Connect And Access Files Remotely To Samba Server Over Internet

May 31, 2010

I have a server at home running as a file server and DHCP connected to a switch with a wireless AP in there as-well. with this setup I can access the files and do some configurations via SSH on the actual server anytime I'm able to get the wireless signal, now lately I felt the need to be able to do the same but this time over the internet. I've read somewhere already that I'm gonna need a router with port forwarding and NAT, then know the IP address of the server but my problem is once you start talking about routers then you need broadband connection which is something I don't have. Getting a router is not much of a problem but without ADSL like connection I guess its useless, what do I need to do?

View 7 Replies View Related

Networking :: Unable To See Shares On Samba Server - No Authentication Access Desired (open Access)

Jun 12, 2009

I've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.

smb.conf follows:

# Samba config file created using SWAT
# from UNKNOWN (>)
# Date: 2009/06/12 14:15:15

[code]....

View 1 Replies View Related

General :: How To Access Samba Share From Both Fedora And XP

May 12, 2011

I installed samba server on fedora13 last week and share some files from samba server GUI. I also created samba user and password for shared folders but I can't get access samba share folder from neither fedora machine nor Windows XP. When I open samba share from other fedora such as smb://192.168.10.2. I can see share file and when I browse folder, password required box is appeared but after I put samba username and password. The Error message is Unable to mount location Failed to mount Windows share. Even when I browsed samba share from windows xp.

Error message is \192.168.10.2smbshare is not accessible. You might not persioon to use this network resource. Contact the administrator. The network path was not found. How can I get access samba share from both fedora and XP that is what I installed on server:

[root@fedora2 mnt]# rpm -qa samba*
samba-winbind-clients-3.5.2-60.fc13.i686
samba-swat-3.5.8-74.fc13.i686
samba-client-3.5.8-74.fc13.i686
samba-3.5.8-74.fc13.i686
samba-common-3.5.8-74.fc13.i686

and here is my smb.conf file
# Samba config file created using SWAT
# from UNKNOWN (127.0.0.1)
# Date: 2011/04/29 22:05:08

[global]
workgroup = workgroup
server string = Samba Server Version %v
security = user
guest account = youth
log file = /var/log/samba/log.%m
max log size = 50
guest ok = yes
cups options = raw
smb passwd file = /etc/samba/smbpasswd
;encrypt passwords = yes

[homes]
comment = for all users
read only = No
;browseable = yes
path = /home/aung/smbshare

[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes
browseable = No
[Public]
path = /home/aung/Public
read only = no
;browseable = yes
valid users = abrt, ftp, operator, youth, yu

[smbshare]
comment = personal share
path = /home/aung/smbshare
write list = yu
read only = no
;browseable = yes
valid users = youth

View 2 Replies View Related

Fedora Networking :: Samba Server Not Shown In System Administration / Give Permission To Access Home Folder?

Jul 1, 2010

I installed samba server in my external HDD. But it is not shown in system ----> Administration. Is there any problem. Then How to give permission to access home folder.

View 3 Replies View Related

General :: Cannot Access The Internet On Newly Installed Fedora

Sep 8, 2010

I have just installed fedora 13 onto my old PC. Everything is great apart from the fact that i cannot access the internet. My isp is TalkTalk, they do not support linux, and have suggested that i contact the Geek squad who might be able to help me for the princely sum of �30. i think that all that i need is the ip address for my Isp or something equally simple and my problem will be solved. failure to resolve this issue means that i might have to go back to windows.

The machinery that i have is an emachines 3210, 2.70 GHz, a Dlink wireless router, i am using a cat 5 cable plugged directly into the back of the pc, i am using fedora 13. ps my son is using windows and is connected to the internet still via WiFi.

View 5 Replies View Related

General :: Installed Fedora 14 And Access Hardware Info?

Nov 14, 2010

I just installed Fedora 14 and I want to access my hardware info. In Windows I could get system info such as cpu type, speed, stepping, memory, graphics card, etc.

View 4 Replies View Related

General :: Installed Fedora 12, Now Can't Boot/access Vista?

Feb 9, 2010

I've not been able to find a solution on the forums, so thought I'd post. My DELL PC came with Vista installed and I then added Ubuntu. This seemed to work fine although I didn't really use Ubuntu too much. Then last week I decide to replace Ubuntu with Fedora 12. I selected the replace existing Linux option during the install process.

After installation, Grub displayed 2 options: Fedora and Other. Fedora was fine, other didn't boot. After readinf around I added another option for vista, but this results in the following error:
Error 13: Invalid or unsupported executable format

fdisk -l returns:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x50000000

[Code]...

View 7 Replies View Related

Server :: Samba - While Access The Shared Folders In WINDOWS I Got "access Dined" Error

Feb 27, 2010

I am using RHEL5 in that i have installed samba rpm as well as created samba users while access the shared folders in WINDOWS i got "access dined" error.

View 1 Replies View Related

Server :: Access Permission In Samba?

Jan 25, 2010

I'm new with Samba and have access problem with Samba on Rhel 5. I want to share iso directory, and user admin can read and write while user bill can read only. smb.conf file looks like this#======================= Global Settings =====================================

[global]
workgroup = CORP
security = SHARE

[code]....

View 3 Replies View Related

Server :: Host Name Access Without Samba?

Dec 2, 2010

I'm setting up a LAMP production server for the first time. When I installed Ubuntu server edition, I selected to install Samba. My idea was to be able to easily access the server's files on the LAN using Windows. All was well and I could ping/ssh between Windows and the Ubuntu server without any problems using the host names. Later, I became concerned that running Samba on a production server might introduce security issues. Therefore, I used apt to purge Samba.

Now I am unable to ping/ssh between the Windows machines and the server using the host names. It only works if I use the IP address.

Two questions:

1.) Is it a security risk to run Samba on a production LAMP server?

2.) How do I get back to being able to use host names without installing Samba?

View 4 Replies View Related

Server :: Can See My Samba Share But Cannot Access It.

Apr 24, 2009

This is my first post. I am not all that new to Linux. I have done lots of reading on the OS but always felt a little timid when it came to trying out stuff.Here is my problem I have a stand alone samba server I am trying to setup to share all my digital photos and other doc. I can see the share from other machines. On the windows machines you can see the users home directory and the share itself in an folder icon. Whenever I try to access the share it asks for a passwd. I enter the passwd and the share folder is visible when I click on the folder I get and error message.

View 14 Replies View Related

CentOS 5 Server :: Cannot Access / Var Through Samba

Jul 3, 2010

I'm planning to use a virtual CentOS box for web development (to use the same software as on the real server). I configured Samba to have root guest access to /var/www/ but it doesn't let me in /var. Chmod 777 doesn't help. Nethertheless, I have full access to /sbin and /etc.

View 2 Replies View Related

SUSE :: Samba Server - Installed Intel Network Card Not Showing Up

Mar 31, 2010

Intel 1000GT gigabit Network Card itself installed successfully and shows up under network cards. However, when I plug it into the network in place of the regular 100mbit card, it won't show up.

View 8 Replies View Related

Server :: Unable To Access Samba Shares

Jul 24, 2011

First off a little history of me lol. I'm not completely a Linux noobie, but I'm not the most advanced user either. With that said I have a few interesting problems with Samba.First off I can see the NetBios name under Windows Networking (Windows 7), however everytime I try to connect to it I get an Access Denied and/or "Incorrect Password/Username" error. I have gone into secpol.msc and changed the values that other posts have suggested. Both the server and the workstation are located under the same group, and I have used the smbpasswd -a <username>. The server is not configured to be a Primary Domain Controller so.. I'm lost. Infact my brain hurts from 3 days of this. I have posted my SMB.CONF file to see if that helps. Hum.. Maybe I'm just trying to access a file share that isn't there..

View 13 Replies View Related

Server :: Access Samba Shared Files

Feb 11, 2010

I have installed samba server one month ago and it was working fine till yesterday but today morning when any network client is trying to access samba shared files by giving smb://<serveripaddress> it is asking for password...that is ok but when he is giving the password it is again opening the same password window to enter password again.The clients are giving correct password that is confirm. At the server side i have run smbclient -L localhost -U% and that is giving proper response so that also means that samba server is working fine so i dont know what could be the problem and what its solution.

View 7 Replies View Related

CentOS 5 Server :: Can't Access Samba DFS Share

Feb 19, 2010

I'm trying to set up a test system for Windows 7. I've been having trouble getting it to map drives on the domain where I work, so I wanted to set up a test system with a similar setup so I can play around with settings without mucking up our network. Only problem is I can't get it configured to even work with XP, which does work on our domain.

When I type \server in the Run box I get the explorer window showing all of the test shares I've set up. But when I try to access them, it says the network path could not be found. Here is my smb.conf file:

[global]
workgroup = MAJOR
netbios name = VPN
realm = MAJOR.COM

[Code]....

View 14 Replies View Related

General :: Installing Fedora13 From DVD?

Jun 12, 2010

I have windows xp on my dell but I lost the drivers disk so I want to install linux Fedora 13 instead and wipe the windows xp. I burned the iso to a dvd and loaded up the live session user and used "Install to harddrive" but when I get to the partitioning window there is no harddrives to install to so I cant overwrite the windows drive (/C:)..

View 1 Replies View Related

Debian Configuration :: Samba - Cannot Access Server After Upgrade

Mar 12, 2016

Following yesterday's and then today's upgrade of my Debian 8 32-bit system (among other things to samba 2:4.1.17+dfsg-2+deb8u2 (yesterday: ...deb8u1)) I cannot connect my Mint 17.3 laptop to the server anymore. Were there any changes to smb.conf regarding authentication or other aspects that might lead to this problem? I am enclosing part of my smb.conf. By the way - I also have trouble using ssh to connect to the Debian machine, such as the ssh-command taking "for ever" and then getting the message "Write failed: Broken pipe" when entering an ls-command on the command line.

H. Stoellinger
smb.conf:
[global]
workgroup = RAINERMUSIK
netbios name = hsdesk
server string = Samba Server hsdesk

[Code] ....

View 1 Replies View Related

Ubuntu Networking :: Cannot Access Samba Server Using Windows XP/7

Mar 4, 2011

I cannot access my Ubuntu samba server using windows XP or 7. I keep getting prompted for a username/password. I have created both a unix username with password and a samba username with the same password i used for the unix user. When windows prompts me for the username/password i give it the same one i created on the samba server, but it still will not take it. I know samba is running because i can view the shares but cannot access them without getting prompted for username/password. I just have the one user for now while i am testing, but there will be more.

I am using Ubuntu Desktop 10.04.

View 2 Replies View Related

Networking :: Samba Only Access By Ip But Not Hostname/server String

Jan 31, 2011

I am using samba version 3 (probably), and the problem is that the linux based nas can only be accessed via its ip 192.168.x.x but not its hostname /server string appointed by the smb.conf file:

Code:
[global]
netbios name = NAS
server string = NAS
smb passwd file = /etc/smbpasswd

[Code]....

View 3 Replies View Related

Server :: Samba Shares - No Password Request For Access

Feb 23, 2010

I recently switched from centos to fedora as my server choice. Probably not the best decision but I like trying new things. Now before I switched I had my samba server setup just they way I wanted it. Now I'm having a hard time getting it back to that way. Here is my smb.conf

Code:
[global]
workgroup = workgroup
netbios name = netbios name
server string = Linux Server
security = user
wins support = yes
encrypt passwords = Yes
domain logons = yes
[homes]
comment = Home Directories
browseable = yes
writable = yes
valid users = %S

[me]
path = /home/me
read only = no
public = yes
create mask = 0777
directory mask = 0777
browseable = yes
writable = yes

Now I did throw away my old smb.conf because it wasn't that complicated and I figured I could reproduce it.. aside from that everything is working except for the fact that I can access any share I want to listed without it requesting a password. I have a username and password setup with smbpasswd and I think everything else is setup correctly involving samba shares but I have no idea why it won't request a password.

View 1 Replies View Related

Server :: Cant Access Samba Shares In Ubuntu 10.04 From Windows

Jul 7, 2010

So I setup the newest Ubuntu on my old desktop on a 30g HD and have 2 200G HDs with a ntfs file system on those two. I got SSH and FTP configured, then went on to setup Samba.I have it (seemingly) set up well. /dev/sb1 gets mounted on /data1 /dev/sc1 gets mounted on /data2.I want anyone connected to my router to be able to see this machine and be able to read and write to both shares.

I configured WINS on my laptop to point to the linux box. and i've seen the pc in question (TECH-PC) in "My Network Places" on both of our laptops.Long story short, I try to connect to my network share and it says i don't have permission and i need to contact my network admin. This computer is the only one with Linux installed, the rest are windows-OS.Let me know if you need more info, pretty stumped here, have searched, read, scrapped my install and started from scratch, maybe i need to sleep on it

View 5 Replies View Related

Server :: No Write Access To Subfolders Of Samba Share

Dec 4, 2009

I am using samba t share my files.I am sharing /media/MEDIA folder. it is a ntfs partition mounted with ntfs-3g with write/read access from linux.I can see and browse my shares and also create files in the root of this partition, ie /media/MEDIA, but in its subfolders i do not have write permissions.

another interesting thing is that i have permission to create directory and delete files everywhere and in any folder, subfolder but when trying to create files i get not enough free disk space error.by the way i dont know if this config file is correct, i find as template in internet.

View 8 Replies View Related

Server :: Not Able To Make Samba Share That Has Write Access

Mar 21, 2010

I'm running Ubuntu 9.1 server on an PII Compaq. Read an article "Samba: How to share files for your LAN without user/password" [URL] and some others and can see and pull up files, can't change or delete. Here is my smb.conf:

# Sample configuration file for the Samba suite for Debian GNU/Linux.
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example

# Some options that are often worth tuning have been included as
# commented-out examples in this file.
# - When such options are commented with ";", the proposed setting
# differs from the default Samba behaviour
# - When commented with "#", the proposed setting is the default
# behaviour of Samba but the option is considered important
# enough to be mentioned here .....

View 22 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved