i was trying to install mac snow leo in virtualbox but when i searched for wut i need to have i found this link when i entered the code it returned nothing so apparently i dont have it,im asking if theres a way i could get it or just get mac work in virtualbox?
View 1 RepliesI am running Fedora on a VirtualBox. Sometimes to allow for performing some real hardware testing, I need to run my development environment on a physical machine. So I need the hard disk of the virtual machine (the .vdi file) to be interchangeably working on both the virtual machine itself and my physical PC by booting a bootable image, mounting the vdi file, and then chrooting to it.
View 1 Replies View RelatedI cannot make Virtualbox work in Ubuntu 10.04 (upgraded from Ubuntu 8.04). I tried both to install Virtualbox OSE from Package Manager and Virtualbox 3.2 downloaded from the Virtualbox site (32 bits version, as my OS). Installation is OK, but when I try to run it, I get an error message:
Error in home. virtualbox.xml (line3) cannot handle settings version 1.2-linux. Code: NS_ERROR_FAILURE (080004005). Virtualbox would be good because it allows running some Windows applications or games. Wine seems useless, only a couple of applications run in Wine and practically no games. It keeps warning me about DirectX etc. I can't understand why Wine exists at all.
VirtualBox: So, with VB, testing out stuff without messing up your actual operating system (in my case Linux). (I had more to say but can't remember atm) Remastersys: Well, I think I MIGHT have a reason as to why Remastersys doesn't work for me. I think I might have downloaded the wrong repository thing. I downloaded:
[Code]...
I ask because of the word Lucid is in the sentence. What do you all think, should I un-install remastersys and downloaded the one with the word Lucid in it and see if that makes a difference as to whether the program makes a proper .iso file or not?
My USB-modem and my freerunner phone is no longer recognized by fedora. Last time this happened I just reinstalld Fedora because I had no id�a what caused the problem. But now I recognized that virtualbox was the last package I installed before the problem occured.
I tried to uninstall virutalbox but the problem remained. Is there a way to reset all the network settings without reinstalling fedora?
I have done some googling - same question being asked by others but no answer I could find .. so here goes...
I am using Rhythmbox to listen to radio stations - I would like to import a lot of stations into it without having to go through a huge list adding individually. a good free Virtualization Software Package that work on OpenSuse with the KDE Desktop
Is there any way I could import a list somehow?
i installed ubuntu using wubi and so far i have been impressed. I quickly filled up the small size i allocated for the ubuntu installation in wubi and now find myself in quite a predicament. I was thinking of performing a clean install of ubuntu and removing the existing windows installation. Rather than dual booting, i was using virtual box to run a windows xp machine so that i could use common windows applications. However, i was having some problems running some applications in the virtual box.
it was possible to install ubuntu and windows on the same hardrive with the ability to boot into either/or, but also be able to run the same windows installation inside a virtualization program in ubuntu? The majority of the windows programs worked fine in the virtual box, but some of the applications didnt. Is there any software out there that can do this?
Can anyone suggest a good free Virtualization Software Package that work on OpenSuse with the KDE Desktop, as I need to use Windows for some applications that have not got a Linux equivelant, Namely Reserch In Motions BlackBerry Desktop Manager and the drivers for my Printer and Scanner, so I would also need something with USB pass through. Or if there isn't any free virtualization software that will dowat I want that's free then something that is not expensive that's paid for. I like the look of Parallels Desktop 4 for Windows & Linux but I'm not sure if I would be able to justify paying �54.99 for the ammount of use that it will get?
View 9 Replies View Relatedi'm currently using ferdora 13. would like to know how can i setup xen virtualization on it?
View 1 Replies View RelatedI have server with the relevant RPMs for virtualization, but i can't find the way to change it to be virtualization server. I am using Redhat 5.3 Do you have any relevant document for configure virtualization server after OS installation?
View 5 Replies View RelatedI have the latest version of Ubuntu Ultimate Edition... and the newest Virtualbox, because I need my Zune software..well I connect my Zune..and it shows up on the virtualbox, but it won't install the driver? What is this about?
View 8 Replies View RelatedAfter upgrading to Ubuntu 11.04, I can't get VirtualBox to work. The program itself starts find, and I am able to create an configure an virtual machine. But when I try to launch the new virtual machine, I get this message
Failed to load VMMR0.r0 (VERR_SUPLIB_OWNER_NOT_ROOT)
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Console
Interface: IConsole {515e8e8d-f932-4d8e-9f32-79a52aead882}
I have tried purging the virtualbox packages from the Ubuntu repository and install the once that can be downloaded from oracles website. I have also tried doing a "/etc/init.d/vboxdrv setup" and I have tried running vbox as root instead of my regular user. Nothing works.
Does anyone have an idea to how this problem can be fixed. Have been using virtualbox for years without problems for browser testing purposes. Really need to get this working again.
On my HP TX2500 laptop, dual-booting Vista and 9.04, Ubuntu installation found the WLAN and it works fine.I installed VirtualBox with Vista as the host and 9.04 as the guest. Wired Ethernet works fine but it didn't seem to find my WLAN. What more do I need to do?
View 1 Replies View RelatedI'm trying to get Gnome 3 to work on 11.04 under virtualbox (3D acceleration enabled) but I get the message that "it can't load session gnome" when I try to log in. The same message appears when I try to do this on an EC2 instance. Please let me know if someone got it to work on EC2.
View 1 Replies View RelatedI've got a problem with getting my VPN connection from my virtual machine working (a XP64 running in VirtualBox). I really need to get it working so that I can nuke my windows partition, and because I would like run linux programs while using my XP VPN connection (as I need to run some XP programs at school). I've found this manual on how to do it on Ubuntu, but I am doubt about how to translate it to Fedora (and I really prefer Fedora). [URL]
View 6 Replies View RelatedWhen I install the latest F12 kernel, my F12 installation freezes immediately on boot. The previous kernel booted fine. It's a little strange, because if I edit the grub.conf to use the old kernel, the freeze still occurs.Is anyone getting Kernel 2.6.31.12-174.2.22 to work in virtualbox? (both yes and no answers would be useful here)Does anyone have any idea of the cause (and especially, why updating the kernel would cause the _old_ kernel to freeze as well)
View 14 Replies View RelatedI am doing a project for school to set up a Linux network in virtual-box. I have very little Linux experience and am struggling to make anything work. I am trying to get webmin to work but it won't connect. I followed the install instructions perfectly and everything seemed to work fine. I've opened any ports that it said to open. but I still can't get it to connect. When I enter https://myservername:10000/ it just try to load until it times out. When I try to ping that address it says not valid network address. I'm at a loss and this is due in a few days.
View 3 Replies View RelatedHost is x64 openSUSE 11.2
guest is winxp pro
VirtualBox ver 3.0.12
The install and setup of VirtualBox is good and working.
I'm having a perplexing issue with usb devices. I have three usb devices connected to my system - apc battery, sd carder, and a Logitech joystick. All devices work on the host. I can connect the apc and the card reader to the guest and they work perfectly. But not the Logitech joystick. I get this error, same as I've seen in some other threads:
Failed to attach the USB device Logitech Force 3D Pro [0600] to the virtual machine winxp1. Failed to create a proxy device for the USB device. (Error: VERR_READ_ERROR)
under "details" is this:
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Console
Interface: IConsole {0a51994b-cbc6-4686-94eb-d4e4023280e2}
When I installed I modified my fstb:
Code:
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UA115587-part1 / ext4 noatime,acl,user_xattr 1 1
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UA115587-part2 /home
[Code]....
I'm running Ubuntu in a virtualbox VM on windows, and none of the key-bindings that I define for compiz plugins (such as Grid and Put) work. I've tried letters and numbers by themselves, as well as combined with ALT, CTRL, and Super, but all fail.
View 1 Replies View RelatedI am trying to use VirtualBox which worked just a week ago (I haven't changed anything with it) but now it fails. When I try to start it (from the command line) with /usr/bin/VirtualBox, as a regular user, it fails.
View 6 Replies View RelatedI'm running VirtualBox 3.2.6 on a Win7 computer. In VB I have several clients:
3 OpenSuse, 11.2 & 11.3, 2 w Gnome one text-only. One Smoothwall Two Debian Lenny, one w Kde one w Lxde Only in one Debian, the one w Kde, the numerical keypad doesn't work! I've tried booting without X but no difference.
I have ubuntu 9.10 and want to give fedora a go through Live usb but how? I my cd dvd drive does not work and my virtualbox is not taking my usb pendrive.
View 2 Replies View RelatedI am running Fedora 12 on an Intel Core 2 Duo system.
I ran a software update which installed a new kernel (2.6.32.23-170.fc12.i686.PAE) along with many other things.
I am now unable to run VirtualBox which I had installed and running successfully before the update.
I tried removing and reinstalling VirtualBox from YUMEX, and rebooting. This did not help.
When I launch VirtualBox from a terminal, it produces the following output:
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: VBoxVMM.so: cannot open shared object file: No such file or directory
I'm not sure what it is complaining about. The files VirtualBox.so and VBoxVMM.so both exist in the /usr/lib/virtualbox directory.
What can be done to get VirtualBox working again on this system?
I'm installing Sun Virtualbox and get the following error message. The install does not stop or crash, but just don't know what to do about this message:
Code:
An error occurred while loading or saving configuration information for frontend. Some of your configuration settings may not work properly.
[code]....
I am reading 'Deploying Rails Applications' and want to create a Rails clustered deployment setup as described in page 141:
Host: Ubuntu server
Guests: 2 Ubuntu vms, each with Nginx on port 80, a few mongrels (app server for rails) and MySQL
What open source virtualization software do you recommend for this purpose? I am trying virtualbox but heard good things about KVM. I have some questions regarding vbox and posted them on vbox forums - [URL].
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
Running VirtualBox 3.2.6 under some host OS (should be irrelevant which one, right?), I created a machine, intending to install Fedora 13 on it. Got the Fedora 13 Live CD iso image, and an 8.6 GB virtual hard drive, completely blank. I set the machine to boot off the Live CD image. The Live CD boots nicely and I get to its desktop. I open "Install to Hard Drive"...and nothing happens. No error message, zip, nada. Inspection of the system shows a series of odd file systems, but I have no clue what they are for and whether they're usable or not.
The sticky [URL] mentions that the blank virtual hard disk should be partitioned and formatted beforehand...So I did, using the Live CD's Disk Utility (Applications: System Tools: Disk Utility). Although the sticky states the small /boot partition should be ext2 or ext3, the Live CD installer proposes to reformat it as ext4. Shouldn't we have formatted it as ext4 right away, then? Also, the installer set the /boot partition's size to 524 MB, not 200 MB as recommended by the sticky.
OBSERVATION: This was not easy because VirtualBox sets the display to 800x600 at most, and the Disk Utility spills beyond those confines WITHOUT PROVIDING SLIDERS. It was sheer luck that the required buttons (create partition, format partition) were barely reachable (at the bottom edge of the screen). This is a serious problem, because increasing the VirtualBox display size can only be done *after* installation (see for instance[URL] - since this guest addition requires rebooting the guest OS, it probably won't stick to the Live CD).
Once those two partitions are prepared and the virtual machine rebooted, "Install to Hard Drive" works as expected.
OBSERVATION: It is absolutely inexcusable that the Live CD installer (Anaconda?) does not propose to do this partitioning and formatting for the user. It is even more inexcusable that it should fail without giving any feedback whatsoever to the user.
Aside: VirtualBox's guest additions does not work correctly (for 3.2.6 anyway). The Devices: Install Guest Additions menu merely mounts a CD image VBOXADDITIONS_3.2.6_63112) without any feedback (expected feedback because the menu ends with an ellipsis). The CD, once opened, has an Open Autorun Prompt button...which fails to do anything. Manually running autorun.sh also fails. I had to manually invoke VBoxLinuxAdditions-x86.run from a terminal to get anywhere. Even then I was unable to go higher than 1024x768.
I want to run 4 instances of a Virtual Machine on a Dell Power Edge 7401 machine want to know which Virtualization platform will help is there any performance compatibility test some where so that I can understand it.
View 3 Replies View RelatedThere are lots of technologies which are used for virtuaizing such as OpenVZ, Xen, VMWare, KVM.
I tried all except KVM. Is there any web gui control pane which can be used for KVM virtualization ?
Like, HyperVM is used for openvz and xen, vmware have their own control panel web gui
I would like to try putting some kind of free "bare metal" visualization for desktop useage on my laptop. I've been googling about the possibilities, but still I'm not sure which would actually work in my case. I've seen VMWare ESXi which looks ok, but unfortunatelly it is meant for servers and I can't have ESXI and Sphere client on same laptop. Another candidate I found is KVM, but as much I've seen it requires VTx VTd support from hardware, which my laptop can't provide. The same requirements must be met for Citrix Xen Client, which is meant for desktop virtualizations, but because of lack of VTx and VTd, can't be used in my case. Is there any other possibility? Currently I'm using VirtualBox and VMWare player for virtualization purposes, but I would like to pull out more performance out of it, and a heavy OS on top of another heavy OS just isn't the best way.
View 2 Replies View Related