Fedora Networking :: Get VPN In VirtualBox Through 11 To Work?
Oct 15, 2009
I've got a problem with getting my VPN connection from my virtual machine working (a XP64 running in VirtualBox). I really need to get it working so that I can nuke my windows partition, and because I would like run linux programs while using my XP VPN connection (as I need to run some XP programs at school). I've found this manual on how to do it on Ubuntu, but I am doubt about how to translate it to Fedora (and I really prefer Fedora). [URL]
View 6 Replies
ADVERTISEMENT
Sep 19, 2009
My USB-modem and my freerunner phone is no longer recognized by fedora. Last time this happened I just reinstalld Fedora because I had no id�a what caused the problem. But now I recognized that virtualbox was the last package I installed before the problem occured.
I tried to uninstall virutalbox but the problem remained. Is there a way to reset all the network settings without reinstalling fedora?
View 3 Replies
View Related
Feb 21, 2010
On my HP TX2500 laptop, dual-booting Vista and 9.04, Ubuntu installation found the WLAN and it works fine.I installed VirtualBox with Vista as the host and 9.04 as the guest. Wired Ethernet works fine but it didn't seem to find my WLAN. What more do I need to do?
View 1 Replies
View Related
Mar 2, 2010
When I install the latest F12 kernel, my F12 installation freezes immediately on boot. The previous kernel booted fine. It's a little strange, because if I edit the grub.conf to use the old kernel, the freeze still occurs.Is anyone getting Kernel 2.6.31.12-174.2.22 to work in virtualbox? (both yes and no answers would be useful here)Does anyone have any idea of the cause (and especially, why updating the kernel would cause the _old_ kernel to freeze as well)
View 14 Replies
View Related
Apr 24, 2011
I am doing a project for school to set up a Linux network in virtual-box. I have very little Linux experience and am struggling to make anything work. I am trying to get webmin to work but it won't connect. I followed the install instructions perfectly and everything seemed to work fine. I've opened any ports that it said to open. but I still can't get it to connect. When I enter https://myservername:10000/ it just try to load until it times out. When I try to ping that address it says not valid network address. I'm at a loss and this is due in a few days.
View 3 Replies
View Related
Jun 9, 2010
I have ubuntu 9.10 and want to give fedora a go through Live usb but how? I my cd dvd drive does not work and my virtualbox is not taking my usb pendrive.
View 2 Replies
View Related
Oct 31, 2010
I am running Fedora 12 on an Intel Core 2 Duo system.
I ran a software update which installed a new kernel (2.6.32.23-170.fc12.i686.PAE) along with many other things.
I am now unable to run VirtualBox which I had installed and running successfully before the update.
I tried removing and reinstalling VirtualBox from YUMEX, and rebooting. This did not help.
When I launch VirtualBox from a terminal, it produces the following output:
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: VBoxVMM.so: cannot open shared object file: No such file or directory
I'm not sure what it is complaining about. The files VirtualBox.so and VBoxVMM.so both exist in the /usr/lib/virtualbox directory.
What can be done to get VirtualBox working again on this system?
View 13 Replies
View Related
Jun 3, 2011
I've installed fedora 15 on virtualbox as my guest OS.I've configured bridged networking and I've set my router to assign an IP to it.when it boots up,I have 2 devices shown via "ifconfig" which is "lo" and "p2p1" and none has the ip assigned to it.I'm unable to access the Internet. How can I configure it to do so?I've tried following this tutorial: [URL] but the file "ifcfg-ethX" doesn't exist...it only has ifcfg-lo..... I've installed fedora 15 spin edition which doesn't have a GUI for me to edit network settings...
View 13 Replies
View Related
Mar 8, 2011
I am using Fedora 14 x86_64 as the host and Windows XP under VirtualBox 4.0.4. I have added two ports (TCP and UDP) to the firewall settings in 'other ports' in the Fedora firewall setings. Do i need to do this?I noticed the port forwarding option in the Fedora's firewall settings which asks for either the ports to be forwarded to either local or an ip address. Do i need to do anything here?
In the settings under VirtualBox under Network adapter 1 (which is enabled) and attached to NAT, there is a port forwarding option in the advanced settings. Can the host and the guest port be the same number? If i use 'open port checker' to check if the tcp port is open in windows xp, will it work as it does in firefox under Fedora?
View 2 Replies
View Related
Aug 21, 2010
VirtualBox-3.2.8 (the non-free version) seems to be able to tell my wlan0 connection to 'split' into 2 IP addresses: one for the OS inside VirtualBox and one for the host. My router runs Tomato and I can see both real and virtual machines with different IP addresses in the device list (I can also visit httpd running on my host machine from inside the virtual machine). Is it possible to replicate this outside of VirtualBox?
In my case, I would like to be able to 'split' wlan0 into 2 with one IP address for normal network use and the other 'assigned' to eth0. eth0 is "shared to other computers" from NetworkManager and is currently connected to a Belkin router. My goal is to have this Belkin router assigned an address that all machines in my Tomato network can access (I have an OpenBSD 4.7 home server connected to the Belkin).
Whilst VirtualBox was running I tried to see if bridge-utils was being used:
Code:
[root@1 ~]# brctl show
bridge namebridge idSTP enabledinterfaces
...but it appears as though it isn't.
View 8 Replies
View Related
Jan 27, 2011
I have Fedora 14 installed in VirtualBox, running in MS Server 2008.There is Oracle 10g software installed in Fedora 14.How can I configure connection to Fedora 14 from MS Server?Anything I've done is useless.I need to open port 1521.I can ping Fedora from MS Server. I can make connection "telnet localhost 1521" succesfuly in Fedora. But that's all.
View 1 Replies
View Related
Sep 10, 2010
I am having trouble for routing port 80 from a Billion adsl modem to a guest server in VirtualBox. There are quite few different changes from my last setup so I kind of confuse which one is wrong.
I used to use have the setup belowusing modem Linksys WAG354G use static ip 192.168.1.100 for my machine use static ip 192.168.1.102 for my guest VirtualBox server guest OS is serving http listening on port 80 i use bridge from my host OS for VirtualBox set my modem to direct all traffic on port 80 to 192.168.1.102 host OS was Fedora 11
now I useusing modem Billion 7404VNPX use same static address and configuration host OS is Fedora 13
main issue is I cannot reach the guest OS if I navigate to my modem ip address. (e.g. http://192.168.1.1) if I change the modem to direct all traffic to my host OS ip address (192.168.1.100) it works nicely.
I have tried to disable and enable the firewall without any luck.
View 1 Replies
View Related
Mar 18, 2011
I created a F14 x86_64 guest OS in VirtualBox4 (hosted by F14 x86_64) and configured it to get its IP from my router but it won't do so on boot. The other guest OS's (Fedora 14 i386, 2x Oracle EL5) are able to get their IPs on boot.
I checked the setting in the network manager and they show that the interface is to be activated on boot but it doesn't. When I log in and run ifup eth0 as root it works.
View 1 Replies
View Related
Jul 12, 2011
I have the latest version of Ubuntu Ultimate Edition... and the newest Virtualbox, because I need my Zune software..well I connect my Zune..and it shows up on the virtualbox, but it won't install the driver? What is this about?
View 8 Replies
View Related
May 30, 2011
After upgrading to Ubuntu 11.04, I can't get VirtualBox to work. The program itself starts find, and I am able to create an configure an virtual machine. But when I try to launch the new virtual machine, I get this message
Failed to load VMMR0.r0 (VERR_SUPLIB_OWNER_NOT_ROOT)
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Console
Interface: IConsole {515e8e8d-f932-4d8e-9f32-79a52aead882}
I have tried purging the virtualbox packages from the Ubuntu repository and install the once that can be downloaded from oracles website. I have also tried doing a "/etc/init.d/vboxdrv setup" and I have tried running vbox as root instead of my regular user. Nothing works.
Does anyone have an idea to how this problem can be fixed. Have been using virtualbox for years without problems for browser testing purposes. Really need to get this working again.
View 6 Replies
View Related
Dec 9, 2009
Host is x64 openSUSE 11.2
guest is winxp pro
VirtualBox ver 3.0.12
The install and setup of VirtualBox is good and working.
I'm having a perplexing issue with usb devices. I have three usb devices connected to my system - apc battery, sd carder, and a Logitech joystick. All devices work on the host. I can connect the apc and the card reader to the guest and they work perfectly. But not the Logitech joystick. I get this error, same as I've seen in some other threads:
Failed to attach the USB device Logitech Force 3D Pro [0600] to the virtual machine winxp1. Failed to create a proxy device for the USB device. (Error: VERR_READ_ERROR)
under "details" is this:
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Console
Interface: IConsole {0a51994b-cbc6-4686-94eb-d4e4023280e2}
When I installed I modified my fstb:
Code:
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UA115587-part1 / ext4 noatime,acl,user_xattr 1 1
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UA115587-part2 /home
[Code]....
View 1 Replies
View Related
Feb 3, 2011
I'm running Ubuntu in a virtualbox VM on windows, and none of the key-bindings that I define for compiz plugins (such as Grid and Put) work. I've tried letters and numbers by themselves, as well as combined with ALT, CTRL, and Super, but all fail.
View 1 Replies
View Related
May 21, 2010
I cannot make Virtualbox work in Ubuntu 10.04 (upgraded from Ubuntu 8.04). I tried both to install Virtualbox OSE from Package Manager and Virtualbox 3.2 downloaded from the Virtualbox site (32 bits version, as my OS). Installation is OK, but when I try to run it, I get an error message:
Error in home. virtualbox.xml (line3) cannot handle settings version 1.2-linux. Code: NS_ERROR_FAILURE (080004005). Virtualbox would be good because it allows running some Windows applications or games. Wine seems useless, only a couple of applications run in Wine and practically no games. It keeps warning me about DirectX etc. I can't understand why Wine exists at all.
View 2 Replies
View Related
Sep 2, 2010
i was trying to install mac snow leo in virtualbox but when i searched for wut i need to have i found this link when i entered the code it returned nothing so apparently i dont have it,im asking if theres a way i could get it or just get mac work in virtualbox?
View 1 Replies
View Related
Feb 4, 2010
I am trying to use VirtualBox which worked just a week ago (I haven't changed anything with it) but now it fails. When I try to start it (from the command line) with /usr/bin/VirtualBox, as a regular user, it fails.
View 6 Replies
View Related
Nov 8, 2010
VirtualBox: So, with VB, testing out stuff without messing up your actual operating system (in my case Linux). (I had more to say but can't remember atm) Remastersys: Well, I think I MIGHT have a reason as to why Remastersys doesn't work for me. I think I might have downloaded the wrong repository thing. I downloaded:
[Code]...
I ask because of the word Lucid is in the sentence. What do you all think, should I un-install remastersys and downloaded the one with the word Lucid in it and see if that makes a difference as to whether the program makes a proper .iso file or not?
View 2 Replies
View Related
Jul 27, 2011
I'm trying to get Gnome 3 to work on 11.04 under virtualbox (3D acceleration enabled) but I get the message that "it can't load session gnome" when I try to log in. The same message appears when I try to do this on an EC2 instance. Please let me know if someone got it to work on EC2.
View 1 Replies
View Related
Nov 5, 2010
I'm running VirtualBox 3.2.6 on a Win7 computer. In VB I have several clients:
3 OpenSuse, 11.2 & 11.3, 2 w Gnome one text-only. One Smoothwall Two Debian Lenny, one w Kde one w Lxde Only in one Debian, the one w Kde, the numerical keypad doesn't work! I've tried booting without X but no difference.
View 3 Replies
View Related
Jun 20, 2009
I've been experiencing a problem with Fedora in which when I enable Wireless in Fedora, Wireless networking does not work in windows. HOwever, when disabled, it works correctly. Windows claims it is "not able to find any networks to connect to"
EDIT: It seems that when wireless is disabled manually on fedora before shutdown, there are no problems in windows.
View 14 Replies
View Related
Aug 25, 2009
Networking on Fedora 11 doesn't work for me on various machines. Fedora 10 does, but only if you don't do an update.Why does Fedora get worse the more you keep it up-to-date?
View 1 Replies
View Related
Feb 17, 2010
Virtualbox, is great, except that I have no wireless networking or USB support. Problem one, is USB support. As far as I know there is a personal free use version of Virtualbox that includes USB support, however I can't find this copy to download it. Any ideas where I can find it? Second problem, I have an integrated wireless networking card in my laptop, that Ubuntu recognizes with no problems, but Virtualbox can't even "see" the device. I found a tutorial that addresses this know issues with wireless and Virtualbox, but I don't understand the instructions
[URL]
Quote:
Wireless Networking Setting up a normal bridged network generally doesn't work if you're bridging from a wireless card to VirtualBox. A simple script that utilises the parprouted tool will allow your VM full access to the wireless network. You will require parprouted to do this: sudo apt-get install parproutedNext, using your favorite text editor, create and edit the script, for example:
sudo nano /etc/network/if-up.d/vbox_networkThen, enter the script (replacing $USER with your username (or whoever you intend to run virtualbox as)). Replace wlan0 with the name of your wireless interface. Use an available IP address on your network for tap0 (I have used 192.168.1.100 in this case):
sysctl net.ipv4.ip_forward=1
VBoxTunctl -b -u $USER
ip link set tap0 up
ip addr add 192.168.1.100/24 dev tap0
parprouted wlan0 tap0Finally, make sure the new file is executable by root: sudo chmod 700 /etc/network/if-up.d/vbox_networkNow your networking script is installed, the virtual interface tap0 will be available on boot for VirtualBox. Rather than reboot, let's just run the script now:
sudo /etc/network/if-up.d/vbox_networkThe final thing to do is tell VirtualBox to use the new virtual device tap0. Open VirtualBox, highlight a VM and click settings. Now choose the network option and select Host Interface on the 'attached to' drop down menu.
In the Interface Name text box, enter: tap0 Click ok and start your VM. The VM should now behave as though it was another physical machine on your network!! For more information on the process up to this point, please visit Bridged Networking with VirtualBox on Linux Hosts Using DHCP in the Guest VM It was possible to get DHCP to work on the guest virtual machine. Instructions were taken from here. Because parprouted does not relay multicast, we need to use an additional helper daemon to manage this. I tried dhcp-helper and bcrelay, and had the most success with bcrelay.
Use it as follows:
sudo apt-get install bcrelay
sudo bcrelay -i tap0 -o wlan0At this point, my /etc/network/if-up.d/vbox_network is as follows:
#!/bin/sh
sysctl net.ipv4.ip_forward=1
[code]....
bcrelay -i tap0 -o wlan0 &It seems that I have to start the script by hand after boot. Other than that, host networking now seems to work fine (this issue should be solved by adding the "#!/bin/sh" line just at the beginning of the script.
View 7 Replies
View Related
Apr 2, 2010
I have a Samsung N130 with a Realtek 8192 wifi card (possibly 8192e, I'm not sure) and I am trying to run Fedora 12 on it. I used to run Ubuntu until trying their latest beta and realizing it's not very good, so I looked for something else. Ubuntu was at least easy to get the wifi working with just a few quick commands that were written out, word for word, in order, on the Ubuntu forums. I tried openSUSE on here and it didn't have wifi working out of the box either but people on their forums refused to give me actual instructions and just kept bumping me from thread to thread with people giving vague advice or else just telling me I was looking in the wrong place. I'm hoping that someone can give me clear and detailed instructions on how to get this wifi card working. Keep in mind that I am coming from Ubuntu and so I'm not super comfortable in CLI, if I need to do some CL stuff I will need clear and detailed instructions on how to do that.
View 4 Replies
View Related
May 16, 2011
I just upgrade my Fedora 14 to Fedora 15 RC1.I found the critical issue for me that Juniper Network connect(SSL VPN) didn't work for me again.I wonder if the network interface name changed impact this, but I am not sure about it as I didn't see any obviously error.I can connect the VPN auth page with my username and password after I switch my Java plugin to Sun JRE( I use google Chrome).As the Java VPN applet started, it appeared for a while and shutdown again. I think the VPN auth has been passed at that time, the problem might about creating the VPN Tunnel.
View 8 Replies
View Related
Feb 21, 2010
I am a student of MCA of Manipur University. Now I am using fedora 10 and i want to intall RealTek8185 54M wireless PCI adapter to my Desktop. I have a rough idea of using ndisewrapper driver and i tried also but failed. Please tell me instructions how my mentioned adapter would work using ndisrrapper on fedora 10.
View 1 Replies
View Related
Apr 27, 2010
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
View 6 Replies
View Related
