Ubuntu Networking :: Show The Frequency And The Type Of The Connected Mobile Broadband Network?
May 16, 2011
is there any tool (terminal command preferably) which can show the frequency and the type of the connected mobile broadband network. I mean HSDPA/GPRS etc and 900/2100MHz. At my country there are 2 frequencies used for UMTS, 900MHz for rural areas and 2100MHz for urban and I need to know what type is the connection and what is the used atm frequency. I am using wvdial for connecting to the internet.
View 2 Replies
ADVERTISEMENT
Mar 30, 2011
I have internet access using mobile broadband and i also have a wireless network for home usage without internet access.
When my wireless network is connected every application in ubuntu (Meerkat) tries to use it for inernet access (as neededobviously). As soon as i disconnect from the wireless network (and assuming the mobile broadband is on) everything has access to the internet again using the mobile brodband.
How do i tell ubuntu that i don't want it to use my wireless network for internet access?
View 6 Replies
View Related
Dec 30, 2009
I manage to get my mobile broadband working (connected, I mean) in both root & user account. However, my web browser, IM etc only work in root account.In user, knetworkmanager does show that my Huawei E160G is working fine, connected but I still can't surf the net & chat. I've included the dialout & uucp group for user account but that still doesn't resolve the problem
View 9 Replies
View Related
Feb 7, 2011
I have a Huawei E122 Mobile Broadband HSPA USB Stick on three ireland. i can't get it to connect. but i think the problem might be, when i stick it in nothing happens. it doesn't show up under lsusb. i don't think it "mounts"
View 2 Replies
View Related
Jun 4, 2011
I have u usb 3G stick and I configured a mobile broadband connection to connect to the internet.I filled all details and saved the connection.Now I clicked on the network manager icon in top right corner, but there was no connection with the name I just created.Again I checked in edit connections dialog box and found the connection there.Now how do I connect to this newly created connection while there is no option in network manager?
View 9 Replies
View Related
Nov 3, 2010
I am having problems with my 3 dongle- when I connect it to my netbook it flashes green so it detects a 3G network. However there is nothing in network manager enabling me to choose the mobile broadband so I can't use it. I know there should be an entry "mobile broadband" after the wireless networks listed.
I know the dongle works because I have previously used it successfully- I was using Linux Mint 8 and have now updated to version 9 and when I have tried to use it have been unable to do so.
I have gone into the connections and my 3 connection is present but there is no way for me to select it in network manager.
View 9 Replies
View Related
Jun 28, 2011
I have a Acer Aspire running dual boot Ubuntu 9.10 and Vista. Although it has an Atheros wireless card (AR5001 according to linux, AR5007 according to Vista) until recently I didn't have any apparent problems with it.I installed a ZTE MF112 Mobile Broadband Dongle. Now I am experiencing great difficulty in communicating with my wireless router (with both LAN and WAN traffic). Connecting to the network in the first place appears to happen quite smoothly and my computer obtains a DHCP IP address. However the ping response times are measurable in seconds rather than the milliseconds I would expect, and any traffic across the network crawls, or just times out and fails.
I do not believe it is the router at fault as two laptops, both also with Ubuntu, can connect to it fine and swapping it out for another router does not fix the problem either. Also there is no problem connecting from Vista.I suspect that installing the dongle has altered something which has made the bugs in the wireless card/drivers apparent and that's where I need some help.
View 2 Replies
View Related
Apr 18, 2010
I have a broadband mobile modem iCon 225 (Option) with SiMobil provider (Slovenia). I run ubuntu 9.10 (Karmic Koala). I connect to the internet without problem. After a few minutes, the modem lights start signaling that there is no connection, but the network manager shows connected status. I have to reconnect the network manager to regain connection. After about a dozen times of reconnecting like this, I have to reboot the system, as it won't connect, even if I unplug and replug the modem.
I've noticed these frequent disconnects have started a few days ago. I did experience disconnects in the past, but as nearly often as this. I can't attribute disconnects to activity/inactivity, as they seem to happen no matter what I do.
View 5 Replies
View Related
Jul 13, 2010
I am trying to use my tmobile 8320 blackberry as a modem I hook it up through the USB and the phone is recognized I go into network manager to enter the settings for my Apn and Number to dial to and when I try to enter the Network to connect to the apply button goes away and it won't let me go past that point is this something screwed up in Ubuntu
View 1 Replies
View Related
Feb 4, 2011
I have a k3806-z vodafone mobile broadband modem, on ubuntu 10.04. I have added the mobile broadband connection with the network manager wizard. But network manager does not list my connection. I installed usb-modeswitch and usb-modeswitch-data. Still nothing. The disc utility tells me it recognises the modem as a cd drive and a storage device. Evidently usb-modeswitch is not working.
View 11 Replies
View Related
Oct 17, 2010
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies
View Related
Jul 8, 2010
I have been routing network traffic based on MAC addresses, so we can distribute traffic evenly over a series of WAN IP addresses.Everything seems to be going well, but I have a very curious problem. One of the users can connect to the network without problem, but I don't see him in my network administration application (neither his MAC address or leased IP address).At the same time, I'm trying to identify other unknown computers on my network based on MAC addresses I don't have on file.
View 4 Replies
View Related
Mar 5, 2010
How do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies
View Related
Jul 20, 2011
I want to use my laptop to share network for VoIP adapter. I'm using mobile stick as well as wi-fi and Network manager under Gnome 3. Voip adapter asks for address via DHCP to gain the access to the server some where in the other side of the world.
View 6 Replies
View Related
Jan 9, 2011
I connect to the internet with a mobile broadband dongle. I would like to change the dns settings as page loading seems to be running slow. However, there is no ip tab associated with mobile broadband in the knetwork manager module. There is however for my vpn connection. I have found reference to the ip tab in other postings but alas I am stumped. Is it possible that the mobile broadband connection does not load that tab whereas users on wireless or ethernet have it? That is the only solution I can think of.
View 2 Replies
View Related
Mar 17, 2011
Problems with setting up mobile broadband in KDE4? Than use this instruction: openSUSE starter: Step 2. Need mobile broadband? Use the GNOME applet to make the GNOME nm-applet work under KDE. With this nm-applet I have set up mobile broadband within couple of seconds.
View 1 Replies
View Related
May 22, 2011
I have a Huawei E173u-2 mobile broadband usb stick. It is recognised as a gsm-modem and shows up as such in the networkManager-plasmoid. I have set up the connection details for my ISP (O2), but I can't connect. When I click on the connection, "signal strength" is shown as well as "operator" (o2 - de). The "connection state" changes to "Preparing to connect", then "Setting network address". Then the modem vanishes and comes up again a few seconds later.
Here is the log (/var/log/messages):
Code:
It seems like there is a connection for about 5 seconds, then the modem hangs up and restarts .
The stick works fine with our windows netbook, so I don't think it is a hardware failure.
How do I get this working?
My system:
opensuse 11.4
kernel 2.6.39-30-desktop (2.6.38 gives the same error)
kde 4.6.3
plasmoid-networkmanagement 0.9.svn1192577-168.6
View 2 Replies
View Related
Jun 17, 2011
I am trying to find out how to get the mobile broadband providers to appear on the network manager app, coz at the moment when i try to create a new mobile broadband connection the list of providers is empty.
View 3 Replies
View Related
Sep 10, 2010
I have this usb stick:
The problem is that I have no clue what information I am supposed to give when configuring it through KNetwork manager. The password is disabled and I think the username should be telenor which is my ISP, the other info lines in KNetwork manager, however, I am very uncertain of, and I can't seem to get it working. I have switched from traditional setup with ifup to user controlled through Network Manager and the modem is detected. The module option seems to be loaded and the 'mode' of the stick seems also to be correct, it is not detected as a storage device at least.
View 6 Replies
View Related
Sep 11, 2010
I've just installed openSuse 11.3. How can i connect to the internet. The Mobile Broadband tab on YaST is not clickable. On Linux Mint that tab is available.
View 2 Replies
View Related
May 25, 2011
i am using mobile broadband to connect with network after i connecting mb.it drops it's connection for every 10 minutes.i need to restart to reconnect it.it is happening in kde.
View 5 Replies
View Related
Sep 12, 2010
I want to install a driver for the Mobile broadband HSDPA modem of the Lenovo T510 nootebook because it dosent work with the Networkmanager.
I use opensuse 11.3 whith the kernal 2.6.34-12.
So what i want to do:
1) get attached patch
2) install and extract kernel source
3) patching and compilation (only drivers/usb/serial subdirectory)
4) copy resulting modules to kernel modules directory
If I compile: make O=../temp prepare i get a mistake.
The exactly mmessage is:
View 1 Replies
View Related
Jan 13, 2010
i have both a vodafone and 3 mobile broadband dongles. they both work out of the box, however i am only getting gprs, while i can get 3g/hsdpa using my windows box. is there any gui configuration manager or terminal commands i can use to set it to 3g/hsdpa only? im running ubuntu 9.10.
View 4 Replies
View Related
Jan 15, 2010
Just loaded Ubuntu 9.10 on a Dell 5100, (XP finally got the bsod) I have verizon mobile broadband, all was very good until I realized I cannot connect wirelessly. The usb modem was not recognized, there is no indication of any wireless connection. There is no icon and nothing happens when the usb modem is plugged in. I have been working on this for hrs & hrs. I am a complete novice on Linux, but CompT1 A certified on PC's
View 9 Replies
View Related
Jan 27, 2010
I have an USB (Huawei 1751) modem for mobile broadband. I had it up and running in Ubuntu 9.10 but I had to clear the computer for various reasons. I have decided to only use LTS versions so for the reinstall I have used Ubuntu 8.04 LTS. I have downloaded and installed usb_modeswitch and can see that the modes is changed to the right value. After that I wanted to add a new mobile broadband connection in the network connections wizzard - but cannot see any settings for mobile broadband. I am sure it must be possible - but where is this function hidden in version 8.04 ?
View 3 Replies
View Related
Mar 6, 2010
I have just switched to Ubuntu from Win 7 RC. So far its been fun, learning to use terminal and all. But I have got a problem now I cannot find a solution to.
I am using 3 Mobile Broadband. The thing just worked - I plugged it in, created a new connection, modified config a little and was happily browsing.
However, it started acting out yesterday. When I boot the system with the modem plugged in, the USB stick is recignised and NetworkManager starts connecting (I have auto connect on). It then shows the "connected" message, and generally appears working fine.
On the other hand, I cannot open a single page in Firefox, it shows the default server not found page.
I used the approach Windows taught me: close, open, retry. I unmount the 3 Mobile Broadband drive, pull the modem out and reconnect it. NetworkManager then does it's job and this time everything works.
I nether had this problem in Win7 or Vista. It looks to me something goes wrong during the booting when the modem is plugged in.
View 6 Replies
View Related
Mar 6, 2010
I have bought reliance netconnect broadband+ 3.1 Mbps connection. I am provided Huawai EC1260 device to make the connection.But using ubuntu 9.1 I am not able to make the connection work. I have tested the device in windows XP and it's working fine there. I don't want to use windows and desperate to establish the connection in Ubuntu 9.1.
View 3 Replies
View Related
May 3, 2010
I decided to give 10.04 a shot, and upon first boot, I was able to setup and use my Rogers Rocket mobile broadband stick. When I rebooted, I found that it was in the network settings, but I was unable to connect, nor did it show up as an option in the drop-menu. I played with the terminal trying to see if anything was wrong, but everything seems normal, which is to say I don't even know what I'm looking for in regards to this type of connection.
I obviously know now that it works, I just don't know what made it stopped for the time being. I'm thinking of doing a fresh install over the current partition, and trying to work the issue from there.
View 4 Replies
View Related
May 12, 2010
I recently made a clean install of Ubuntu 10.04 and my mobile broadband no longer works. When I plug it in, the set-up wizard does not appear, and even when I run the wizard manually, the modem is not recognised. I know the modem works as when the laptop ran 9.10 it all worked perfectly.
For the record, it is a Huawei E1550 and has 3 Mobile Broadband Pay-as-you-go.
View 5 Replies
View Related
Jul 21, 2010
Quote:
Originally Posted by SecretCode
Hm. Try
Code:
sudo ifconfig eth0 mtu 1492
ifconfig | grep MTU
And then try surfing...
I also have this problem but my internet connection is Mobile Broadband (through a wireless modem HSDPA), not eth0. In this case how can I change the MTU value?
View 1 Replies
View Related
