Networking :: Unable To See Tkip Or Aes On Network Manager On Fedora 13?

Sep 23, 2010

I am running Fedora 13 and using Ndiswrapper with my pci wireless card. my router is a netgear wgr614v9 wireless router with wpa2-psk. When I try to connect to my network the only options I see for security are dynamic WEP (802.1x) and WPA &WPA2 Enterprise and for authentication all I see is TLS LEAP Tunneled TLS and Protected EAP (PEAP). I can connect to my network when I drop security on the network but other wise I am stuck. I have been trying to fix it for about a week now by myself to no avail

View 6 Replies


ADVERTISEMENT

Fedora Networking :: Not Seeing Tkip Or Aes Encryption Options In Network Manager?

Sep 24, 2010

I am running Fedora 13 and using Ndiswrapper with my pci wireless card. my router is a netgear wgr614v9 wireless router with wpa2-psk. When I try to connect to my network the only options I see for security are dynamic WEP (802.1x) and WPA &WPA2 Enterprise and for authentication all I see is TLS LEAP Tunneled TLS and Protected EAP (PEAP). I can connect to my network when I drop security on the network but other wise I am stuck. I have been trying to fix it for about a week now by myself to no avail

View 1 Replies View Related

Fedora Networking :: Updates Ruined System - Unable To Use Network Manager To Connect To The Net Through My USB Modem

Mar 12, 2009

I've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do

Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?

View 10 Replies View Related

Fedora :: Unable To Use The Network Manager

Feb 26, 2010

I have been getting internet thru the NetworkManager service in FC12. Suddenly today it refused to connect. I tried turning the service on and off, made sure logon info was correct, no luck. Finally I just turned it off and turned on Network service, and that worked. Is there some kind of bug in NetworkManager these days?

View 2 Replies View Related

Ubuntu Networking :: Unable To Connect To A Pptp VPN With Network Manager?

Mar 24, 2010

I followed (or at least tried to follow) tutorials on doing this. I installed network-manager-pptp and tried to configure network manager to connect to a VPN. In the settings when I select MPPE with 128-bit encryption, after I've selected it and applied it, I check the settings and it's invariably unchecked. I tried using KVpnc after getting frustrated with network manager, and I can't seem to get that working either. I've been trying to search for info on this, and I can't seem to find anything on why I can't select MPPE with 128-bit encryption. That seems like it might be why I'm unable to connect to the VPN?

View 1 Replies View Related

Ubuntu Networking :: Network Manager In Hardy - Unable To Browse On The Net

Dec 17, 2010

I have been using Hardy for about 3yrs now and using dialup to connect to the internet. I have a 64bit ASUS with a nVidia ethernet interface........I have just recently switched to cable broadband with a wired connection direct to the eth0 port. I have another computer running puppy linux in which the broadband works. hence this is how I am typing this now. I have connected my ubuntu machine to the cable and the network admin shows a wired connection but will not let me browse on the net with any browser. Not really sure how I got puppy to find it, but it did.

I have used the network manager on both machines with one connecting and the other not. I know there a newer ubuntu's out but I really do like Hardy and want to keep it, but without internet connection other than dialup it seems a bit lame. I am not above using command line options as I use wodim and wget all the time, so my question is.

View 1 Replies View Related

Networking :: Unable To Use Network Manager In Jaunty - Page Could Not Be Displayed

Mar 7, 2010

I have duel boot (XP & Jaunty). I have installed Jaunty in one of my parition through wubi installer. Problem is, though my network connection shows active, I am unable to connect internet via firefox browser or any other browser.

1. I have plugged in ethernet wired connection.

2. I have single network connection (wired connection1)

View 4 Replies View Related

Ubuntu Networking :: Unable To Reset Network Manager Applet In Panel

Jun 25, 2010

Accidentally I removed the NM Applet from the panel and I am trying to reset it. When I right-click on the panel and "Add to Panel", I couldn't see Network Manager. Hence I couldn't connect to the available wireless network. I am able to add Network Monitor, which is similar to Network manager, but this just displays info about current network.

View 5 Replies View Related

Networking :: Network Manager - Unable To Connect Automatically In A Ubuntu System

Apr 13, 2011

I have a 5720 Mini PCIE broadband modem card and though it works, it won't connect automatically in a Ubuntu system. Network Manager says it is enabled when I right click on the icon, but when I do a left click it says it is disabled. I have to right click and disable and then enable before my Verizon connection will work.

View 1 Replies View Related

Fedora Installation :: Unable To Set A Static IP With Network Manager

Jun 22, 2010

I had been running Fedora 12 for some time without much difficulty until I had to change the motherboard of the computer. The new MB comes with Realtek 8112L PCIe Gigabit LAN controller.I am not able to use this LAN controller without Network Manager. The problem is I am not able to set a static local IP with it. Network Manager -> Edit Connections -> Auto eth2 -> edit -> IPV settingsAs soon as I change Method to Manual, 'Apply' button gets grayed out.I am not able to save any change.

View 5 Replies View Related

Ubuntu Networking :: Unable To Connect To Internet With Reliance Netconnect Data Card Using Network Manager

Jan 22, 2010

I'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.

View 6 Replies View Related

Ubuntu Networking :: WPA/TKIP Working But Not WPA2/AES?

Oct 13, 2010

First, I've dinked around with Linux b4 but never really considered it for an everyday desktop machine. After installing the ubuntu 10 release I have to say I am really impressed. This is going to be the kids homework machine!I had one challenge during the installation and that was getting wireless networking going. I set up Win XP first (to get the ndis driver and validate connectivity).After installing ubuntu I could not get the adapter (Netgear N300/USB) to connect to our router (D-Link DIR-825) using WPA2 and AES. Finally I got it to work after setting the router to only TKIP encryption. This works ok but causes the adapter to operate at a lower connection speed

View 3 Replies View Related

Fedora Networking :: Unable To Connect To Wireless Networks And Unable To Configure Network

Jul 27, 2010

I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.

Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network

However, there is no Network option under System>Administration.

Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."

View 12 Replies View Related

Fedora Networking :: Network Manager Has Disappeared

Mar 11, 2009

I updated my FC10 just a day back. The problem is that Netwrok Manager has disappeared. And in spite of re-installing it, it doesn't appear on the panel when i enter 'NetworkManager' as root in the terminal.I have a USB modem right now. Update was made through a broadband connection. Ethernet works perfectly well but this USB modem of mine doesn't work at all. And I have to use USB not Ethernet.

View 9 Replies View Related

Fedora Networking :: Network Manager DHCP

Jul 7, 2009

I have got DHCP issues with Network Manager. Whenever I try to connect using static IP it works, but when I use use Netowork Manager with DHCP, it seems to try to connect and soon says "Network Disconnected"..I've managed to connect to wlan and eth using network, so there shouldn't be any hardware/driver issue.

View 4 Replies View Related

OpenSUSE Network :: Wireless Not Responding, Hardware / Unable To Enable It Through Network-manager Applet?

Apr 4, 2010

I recently installed OpenSUSE 11.2 and everything works fine except wi-fi card, of course. The problem is that after installation the system recognized the card (is was listed in network devices in Yast) but I was unable to enable it through network-manager applet. Though the device could make scanning through terminal (found article in docs but didn't fully understand wpa_gui). Then i was stupid enough to delete the device from Yast list to try to reinstall it. So the problem is that i simply can't do this cause i see no way to re-detect. That is the goal is to at least turn back to post-install system state and try to enable wifi card again.

View 9 Replies View Related

Fedora Networking :: 3G Dongle Doesn't Appear In Network Manager?

Jan 20, 2009

I have run Fedora 9 and 10 on my Dell Inspiron 640m for about 6 months now and generally experience very few issues with it. Specifically I've been running Fedora 10 KDE 64bit since it was launched. Up until I had to reload it a couple of weeks ago my Vodafone Huawei E172 3G dongle worked perfectly with Network Manager. Since the reload the dongle is detected by the OS (lsusb lists it correctly, etc) but nothing I do will make it appear in Network Manager.

I've tried manually configuring a GSM connection then plugging it in, but no joy. I've also tried using it in my Acer Aspire One which runs Fedora 10 XFCE and it work, but when I try it in another Dell Laptop running Fedora 10 KDE 64 bit it doesn't. I'm assuming that a recent update must have caused some issue as it has definitely worked in both Dell laptops in the past. As mentioned I've reloaded recently but the other laptop hasn't been.

I'm unsure where to go from here. I haven't been able to get Vodafone's beta drivers working under F10 (although I did under F9) and can't find any posts on this issue. The version of Network Manager that I'm running is NetworkManager-0.7.0-1.git20090102.fc10.src.rpm, which was released shortly before I reloaded. Chances are I just didn't try my dongle between the update coming out and the reload, so didn't notice the problem before hand.

View 14 Replies View Related

Fedora Networking :: Network Manager Settings All Grayed Out ?

Mar 10, 2009

I'm running Fedora 10. My Network Manager settings are all grayed out. They are uneditable. I can see the detected settings, but not change them. All of the settings fields are disabled.

Is there a way to enable these, so that they can be edited?

Starting with the menu in the upper left corner of the GNOME screen: System/Preferences/Internet And Network/Network Connections

The Network Manager window appears correctly.

I see all automatically generated settings that were created for my various devices:

In particular, I want to be able to edit "Auto vmnet8", for VMware usage.

I know about the workaround of going back to the manual network configuration as used in older versions of Fedora, such as editing the files in /etc/sysconfig/network-scripts/ifcfg-* and then enabling the old "network" service and disabling the "NetworkManager" service.

However, this workaround really won't work in this situation. The VMware interfaces, vmnet1 and vmnet8, are virtual interfaces that *only* exist when the VMware services are running. The VMware services are started *after* the old manual network configuration would be applied. So, at the time the scripts in /etc/sysconfig/network-scripts are processed, the vmnet1 and vmnet8 devices do not yet exist! I'm hesitant to change the numbering of services, lest other things break (VMware on Fedora 10 is rather fragile already).

I love the feature of NetworkManager to be able to automatically apply settings to newly materialized network devices (such as vmnet1 and vmnet8 when VMware is loaded). However, I need to also be able to edit those settings.

Is there a solution that will make my Network Manager "Edit" window not be entirely grayed out? I can see the settings pages just fine, but unfortunately, they are all disabled and I can't edit them at all.

View 11 Replies View Related

Fedora Networking :: Network Manager Connects With 'auto Eth 0'

Jun 23, 2009

I got a little problem with network manager. I got two connections in it, with two different DNS-Servers, because the one of my provider is very slow I surf with opendns, but sometimes that slows down too, so I want to change if necessary. Both connections got the same fixed IP.That worked all fine, until I got my new router (it's a Netgear WGU 624). It's connected by cable and I configured it like the old one. But for some reason instead of connecting to the manually configured connections, my fedora 10 creates a new one "auto eth 0" with a dynamic IP. So every time I boot or switch on from standby my PC connects with this one and I have to manually set it to the right connection. There's no chance to edit or delete it cause those two buttons are grey and won't work. I also tried restarting network manager manually and I also tried starting it with su as root.

View 14 Replies View Related

Fedora Networking :: Restore Network Manager Applet?

Jul 20, 2009

I lost my network manager applet after removing kde-desktop. restore it, as I dont find it in add to panel applications I dont have any clue, also how could I add bluetooth applet in notification area.

View 5 Replies View Related

Fedora Networking :: Network-Manager PPTP Add Routes

Jan 13, 2010

I currently managed it to get a pptp-connect to my home network. now I have another little problem. NetworkManager always routes the whole network traffic over my home network if i am connected to the home network.If i set the "Use this connection only for resources on its network" I have do manually say:

Code:
route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0
After that only the correct traffic runs over the vpn. Now my question is it possible to setup the route via the networkmanager gui?

View 3 Replies View Related

Fedora Networking :: Completely Remove Network Manager?

Mar 27, 2010

After an update in mid-February I can no longer get Network Managero run anyinterface. I tried downgrading ppp, but that did not help. I have tried to delete all devices, but there is no user interface from which I can do that. Network Manager does not appear in any system tray. I even did a complete remove and reinstall, to no avail.This is true on both 32 and 64 bit Fedora 12, and on laptops, desktops and VBox VMs.Here is what I see in messages.log:

Code:
Mar 27 12:09:46 vmf11x64 NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...

[code]...

View 14 Replies View Related

Fedora Networking :: Connection Sharing With Network Manager

Dec 21, 2010

I'm trying to share internet connection with my wifi capable mobile device. For that I'm creating ad-hoc wifi connection in networkmanager with 'shared to other computers' ipv4 option. And there is the problem - the device cannot get the setting via DHCP. The firewall is adjusted properly by NM, dnsmasq is started. I've looked at dnsmasq arguments string and found that the temporary config file which is provided by NM is empty. So, where else should I look for a possible reason or should I just post a NM bug?

View 6 Replies View Related

Fedora Networking :: No Wifi Option In Network Manager

Feb 22, 2011

I just installed F14 today, all day I have been trying to get my wifi to work, I keep running in problems I found many threads with links to download drivers. I did that and in the README file loses me. It talks about compile driver from the source code.

PHP Code:

View 7 Replies View Related

Fedora Networking :: Network Connection Manager Gone / Not Working

May 15, 2011

Fresh install of Fedora 14 from Live cd.Used it for an hour or so, d-loaded some programs, had ti all running great. Wired connection to internet. Had the Network Connection Manager icon in panel. There was an icon saying new updates, alot of them, like 400 or so. Told it to go ahead and up date, left room. Came back hour later was done, said it needed to re boot, so I did. From then on, no internet, not icon, no Network Connection in the drop down list for preferences.

What I have tried:Worked off live cd, again, all works fine, icon, manager, internet all there.In installed version: In terminal, typed service Network Manager, it said unrecognized service.Did yum install network manager. It started to do it, but looked like it was trying to get stuff off mirrors, and of course there is no internet access. error PYCURJ ERROR 6.Of course I can re install, but I figure I will just end up in the same place a few hours from now.

View 6 Replies View Related

Fedora Networking :: Ipw3945 - Wpa_supplicant - Don't Want To Use Network Manager

Jun 26, 2011

I have a laptop with ipw3945 on. I don't want to use Network Manager. this is my wpa_supplicant.conf

PHP Code:

[code]....

I do as root:

PHP Code:

[code]....

In another terminal as root I do:

PHP Code:

[code]...

but no IP address got.

View 8 Replies View Related

Fedora Networking :: Does Network Manager In F15 Support Bridging

Aug 24, 2011

does Network Manager in Fedora 15 support bridging and if so, can you configure the bridge using your wireless interface? All of the information I've come across so far said that you can NOT create a bridge using a wireless interface, and that Network Manager doesn't support bridging, but this info was also from Fedora 12 and below, so I don't know if it's still relevant for Fedora 15. I would certainly hope that by now you can make a bridge from a wireless interface. Even the lowly VMware Player offers this option.

View 2 Replies View Related

Fedora :: Fix For WPA2 TKIP Repeated Asking For Password?

Sep 24, 2009

I just wanted to get this out:

I have had this problem (entering the correct password and having Fedora repeatedly ask me for the password again) for a long time (since FC9) and have recently found what I believe to be a solution.

I know, you'll probably think it's extremely simple, but I just wanted to help any newbies to Fedora who might have the same problem as me.

Solution:

Right click on the Network Manager icon, and select "Edit Connections"

Go to the Wireless tab, and delete the entry for your wireless!Then manually re enter all of the settings.

This worked for me with a WPA2 TKIP connection, but it might work with a WPA2 AES also.

View 3 Replies View Related

Ubuntu Networking :: Change Encryption Mode From Auto To AES Or TKIP On Router?

Jun 14, 2010

I use to have problems getting my wireless card to connect to any network on ubuntu. I discovered that I needed to change my encryption mode from Auto to AES or TKIP on my router. After I did this I was able to connect to my network with full wireless n support. I am using a d-link DIR-615 wireless n router.So far I know this works perfectly on 9.04-10.10 alpha.

View 1 Replies View Related

Fedora Networking :: Fedora 15 - Virt-manager Network?

Aug 30, 2011

I'm a new fedora-user and are having some problems setting ut everything as i want:

The host to always use WIFI
The host to not see the ethernet-connection.
The guest to use ethernet
The guest to be able to get wifi when no ethernet is avaible.
The guest to install from PXE

The guest is going to be a Windows 7. Nothing is done so far, as i cannot figure out how to do this.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved