Ubuntu Networking :: Broadcom 4401 Ethernet: No "Wired Connections" Showing Up In Network Manager?
Apr 10, 2011
I've been struggling with this a bit now, and I'm not sure what the problem is. I have a laptop with a BCM4401 Ethernet card as well as a BCM4311 Wireless card. The wireless card works great out of the box, I'm able to connect with it perfectly. The problem is the ethernet card. Here is the situation: The NetworkManager menu doesn't list "Wired Networks" at all (ie. it doesn't say "not managed", it just only lists Wireless networks) Going into Network Connections, there is an "Auto eth0" entry ifconfig shows eth0 (which I assume means NetworkManager isn't managing eth0) I have edited /etc/NetworkManager/nm-system-settings.conf to say managed=true I have edited /etc/network/interfaces to remove any mention of eth0 (all that's left is the "lo" lines) So I'm not sure why eth0 is still showing up when I run ifconfig, and why Network Manager is not managing it. Any ideas?
Edit: Not sure what I did but now ifconfig spits out this:
Code:
eth0 Link encap:Ethernet HWaddr 00:1c:26:2c:60:75
inet addr:10.0.1.12 Bcast:10.0.1.255 Mask:255.255.255.0
inet6 addr: fe80::21c:26ff:fe2c:6075/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
The MAC address of the "Auto eth0" entry is 00:1C:23:8F:D4:39, the same as the eth1 entry that ifconfig spits out.
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
I just got a new laptop...Dell Vostro 3500. Took off Win put on Ubuntu...all went fine. I did all updates and app downloads using my WIRED NETWORK as wireless wasnt working. However I was more interested in setting up the new computer. Anyway so after all is installed up pops "Broadcom STA Wireless driver" Proprietary driver do you want to install. Obviously I said yes...
Well now My wireless is working great but for some reason my Wired (auto eth0) no longer works. It just says disconnected and its grayed in. I'm pretty much a newbie but did try a few things like:
apt-get update apt-get "something" essential (thats not a command just from memory it was something like that)
However I've had no luck. This Broadcom driver seems to have knocked out my wired network.
I just installed Lucid Lynx on my Dell Vostro 1000 laptop. The problem I'm having is that my wired network card has died on me prior to installation. I'm having the hardest time finding the required files to make my Broadcom BCM4311 wireless card work without being able to download any packages from the web. If anyone knows which files I need and which order I should use to install them that would be great.
I have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?
Neither of my wired network connections are listed in the network manager applet. I know that networking seems to be functional since I can ping local devices on the network. I can't resolve DNS names however. I suppose this is because network manager usually handles DNS? I've posted the outputs of various configurations below.
Code:
/etc/NetworkManager/nm-system-settings.cfg # This file is installed into /etc/NetworkManager, and is loaded by # NetworkManager by default. To override, specify: '--config file' # during NM startup. This can be done by appending to DAEMON_OPTS in
Have searched for this and am sure the answer is out there somewhere, but I can't find it. My wired network is configured as AUTO, and is DHCP, I can add a new static config, but can't get it to load, as the original AUTO always loads on a reboot. I need to be able to run sudo Network manager so I can reconfigure the default..
I have 2 workstations that I'm trying to network together so that I can backup each to the other. One is XP sp2 and the other Fedora 9. Since installing Samba on the Fedora box and trying to get it configured, I have a problem that Add/remove programs won't do installs because it says there's no connection to a network. Network Manager says there aren't any connections, but it worked before the Samba install. Mozilla and Thunderbird can access the internet OK. Both workstations are connected by cable to my router and thus to my ISP (DNS server).
Two questions:- where can I find hints on setting up a wired connection (which card's MAC address does it want? router or wrkstn?) and Am I right that Add/remove is stuffed because of Network Manager?I now have Samba working from Linux to XP, but still can't get into Linux from XP. I tried the Linux PC's MAC address and set up a wired connection in Network Manager. NM still thinks there isn't one...
I have u usb 3G stick and I configured a mobile broadband connection to connect to the internet.I filled all details and saved the connection.Now I clicked on the network manager icon in top right corner, but there was no connection with the name I just created.Again I checked in edit connections dialog box and found the connection there.Now how do I connect to this newly created connection while there is no option in network manager?
I seem to have a little problem with the Network Manager applet - it works vaguely OK, even if it takes a bit long to find my connection, but when I click on the icon, the menu doesn't show.I have also installed the applet through the Ubuntu Software Centre.Just to clarify, the icon appears fine in my panel, and the notifications appear when I am connected, it's just that the menu doesn't appear at all.
I am running Ubuntu 9.04 as a partition with windows 7 on a acer aspire 5742, I would like to connect to the internet in Ubuntu, wirelessly, but I am unable to turn my wireless on in Ubuntu, and network manager says "no network connections available". I have the following network adapters:
a Toshiba L650 laptop, and installed F13 x86-64 on a disk partition using install DVD. The wired ethernet on this is Atheros AR8152, and the Wireless is Broadcomm 4313. Both these devices are not supported by default. So, as per instructions on the Linux Wireless site, and some guidance on this forum, have downloaded the Broadcomm driver tar on another machine, copied it onto the Toshiba laptop using a USB device, and then extracted, and ran the b43-fwcutter. The subdirectory /lib/firmware/b43 is created and has approx 3 dozen files. However, the Broadcomm driver is not showing up as an option in the Network Manager (system-config-network) or in the lsmod command output. I tried to manually add it by doing modprobe b43 command - it then begins to appear in the lsmod, but the option to add the Broadcomm wireless driver during a "New wireless Hardware" is not appearing still. I think, at an abstract level, I need to somehow "tell" the system to add the Broadcomm driver - am just not sure how to do so. On the other hand, the Atheros AR8152 has no driver as of now, so the wired Ethernet is also not connecting. how I can download all the required files on a different machine, and then install it on the Toshiba laptop?
I've been searching for a couple of hours and have not found any threads that solve my situation... hope I'm not repeating something here.
Setup: Notebook with openSUSE 11.2 using KDE 4. Using Network Manager to manage network connection (although I've tried configuring this using ifup as well with no luck).
I need to be able to connect to client networks via a network cable (Ethernet) and connect to the internet via my MiFi 2200 Mobile WiFi. Both cards/connections are active with the following:
I have no problem mounting drives from the client's network. But, can not reach the internet. If I disconnect the ethernet cable, the browser will immediately connect to the internet and load web pages.
I'm assuming the ethernet connection is taking precedence over the wireless connection?
I can't imagine that there is not a way to set this up. If Windows can do it, I'm sure openSUSE can!
It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet.
The Network manager didn't recognize my eth0 device as a maned device.In shell I can use my eth0 but not by Gnome Network Manager.My device is nVidia Corporation MCP67 Ethernet [10de:054c] (rev a2) and I'm running a Fedora 11. On previous version like, Fedora 10 an 9 this board was managed normally by network manager.Anyone already set up this board on Network Manager ?My Notebook is a HP dv2736us and I'm using a Fedora 11 64bits.
I want to share the wireless connection from an Ubuntu machine with an old lap top via the wired Ethernet cards. the old laptop doesn't have wire less. the Ubuntu machine is 10.04 LTS -the Lucid Lynx.
I'm stuck after a clean install of FC14 on an old Everex StepNote (Doing this for a friend). I tried Ubuntu on it first (because it's so easy) but had horrible stability issues and terminal commands wouldn't respond - however Ubuntu detected and ran the eth0 port just fine. FC14 detects my ethernet NIC, but it won't work.
Here are my details. lspci outputs this for my NIC: 00:12:0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
Here is what I have tried so far - with no luck: - I have toggled the networking switch on the laptop and had no luck. - Downloaded Via's VT6102 drivers for Fedora Core, but they don't support kernel 2.6.35.* - Run ifconfig to manually assign an IP address - which it DID take and did route add default gw as well. - Did a ifconfig eth0 down and up as well.
After all that, I still have a "disconnected" wired connection (and yes, I did check the cable - it works just fine in my personal machine.
Running Ubuntu 10.10 on a Dell 710m. Fresh install of OS yesterday. Initially I had wired connection but no wireless. So I started chasing threads & trying different downloads & commands [WITHOUT KNOWING essentially what I was doing; throw your rocks at me HERE] & now I have lost the wired connection also.
Also: [a] If I go into System > Administration > Additional Drivers, I get "No proprietary drivers are in use on this system."
[b] As far as being able to copy a downloaded driver [using a working M$oft machine with net connection] onto an SD card & transferring that driver to the Dell laptop, I have tried formatting 3 different SD cards with the Dell, & each time I come up with various failure errors--& I have no idea why something as simple as formatting an SD card isn't working.
network manager isnt showing any network interfaces. ifconfig shows wlan0 and eth0 and internet is working. how can i get network manager to manage those connections?
When I click on the network manager icon next to the date in the upper right corner of my screen, my network connections do not show up. I have added two DSL connections on my laptop (username & password) but it doesn't show up. Everyday I need to use
Code: sudo pppoeconf if I wish to connect to the internet.
Both these connections are added in the same way on my Desktop Computer and it shows up on the network manager. One of them is even the default which connects automatically on startup.
Because it's not working I assume network manager is not compatible with my laptop. Are there patches to install or other programs that can easily manage my internet connection?
My current network setup at home is all wired, and that's worked for me so far. Now I want to set up a wireless connection on my Linux box that I can connect to with both my laptop and my Nintendo DS. I'd like to be able to host a wireless network from the Linux box, connect to it with some other wireless device, and have the wireless device communicate with the router, the internet, and other computers on the wired network. I have the wired network set up (statically configured) as eth0. Other network adapters present on the system are eth1 (not in use) and wlan0, wlan1, and wlan2 (identical cards, remnants from the last time I experimented with wireless).
So I guess my question comes in two parts: 1) How do I set up wlan0 such that it can host? Is Ad-hoc mode okay for this, or do I need to set it up in Master mode? 2) How do I forward connections between the wireless net and the router? Note that I will be using WEP, as it is all that the NDS supports. I'd like to set up MAC filtering as well, but not until after I get something that works.
Just had an issue crop up where connecting wired network seems to stop wireless connections from getting an IP (happens on multiple networks both while the cable is plugged in and once it's been unplugged; also persists across reboots). Machine is a Dell Latitude 2120n with UnionFS running. Connection was working fine prior to the wired connection
I have a workstation with the two ethernet ports (eth0, eth1), the problem is that i cannot run with both ports up and running. I can run with either one of them, but not both.
Below is the contents of my /etc/network/interfaces file:
I have been using Ubuntu for a couple of days now and I am starting to like it alot. I decided to install it on my laptop, but getting it to connect wireless is becoming a problem. I have been searching all day on how to fix this but nothing so far has helped.I had Windows 7 installed before and it connected fine.
So basically, complete linux noob here, dual-booted fedora 13 with windows 7, and fedora can't seem to detect either my wired or wireless, however i don't really care about the wired. After spending a few hours browsing forums and tutorials and the like, seems as if it is a driver issue, as in there is none. I have managed to find the files :
HTML Code: broadcom-wl-5.60.48.36-1.fc13.noarch.rpm kmod-wl-5.60.48.36-1.fc13.5.x86_64.rpm
I just installed Fedora (15) for the first time. However I do not have a wired internet connection, and have the infernal BCM4312 and I understand the STA works with this (It has worked for me with other distros). In another thread, I read that I can download the relevant files (using another computer) from FedoraFusion, transfer them to the wireless computer and install.