I'm trying to setup a DNS name server using fedora14. Everything is working in the LAN, I've no errors in log/messages, but cannot ping outside world. Can ping IP addresses but not domain names.
View 4 RepliesI am trying to setup a DNS server; where any names that can't be resolved would be forwarded to another server. In my local server, in the named.conf file, under options;The 1.1.1.1 above should have resolution for any outside addresses like URL...However, when I tried to ping yahoo.com from one of my internal machines, I couldn't get to yahoo.com.
View 11 Replies View RelatedI have a named server that has forwarders setup. Quite often the dns server where I forward would not respond right away and the query would fail. It would then also cache the empty result for 3 hours and I would need to restart the service or clear the cache. how would I be able to specify a value for forwarders timeout, just like on Windows DNS.
BIND 9.3.6-P1-RedHat-9.3.6-4.P1.el5_5.3
I want to setup bind9 so that IPs from one range will use the Google DNS Servers and IPs from another range will work from Opens DNS but am unable to get it working here are my configs.anyone that can help me please?
View 1 Replies View RelatedI am new in configuring named.I want to set my firewall (Fedora 11) as a name server. The local domain is a Windows domain. I'd like internal users translate domain name into IP on this server when they go to the internet. After reading some posts on the web, I set up named as below. It seems the named does the job but with some problems.
1) When I start the server, I couldn't find the named process even if the file "named" is in /etc/init.d. I can browse Internet on the server with domain name (DNS works locally). But internal users couldn't get the domain name translated. If I shutdown the server at this stage, it will shutdown within 1 minute.
2) If I run "service named start" after the server boot up, I see process "named" and named work okay. Both internal user and local host can browse Internet with domain name. However, any command starting with "service named" has no response after this, such as "service named status" or "service named stop". I can see it shows "stopping named" and this last forever. I have to kill the process then restart named server so that named may run again.
3) If I shutdown the server now, it will take 4-5 minute instead of 1 minute in 1). The shutdown stuck at "shutdown named" for 4 minutes. Even if I kill process named before the shutdown, it will take 4-5 minutes.
It took me a week on this issue. I appreciate if you could take a look my configure files and guide me through this.
host A: Fedora 7 has bind 9.4.2
host B: Fedora 11 has bind 9.6.1
I want to migrate my bind configuration from A to B I've read the release notes and man pages and I can't see why copying
/etc/named*
and
/var/named/*
I checked /etc/sysconfig/named too... Seems to have no effect on my brand new install on Fedora 11. Host B stays basically un-configured.
Mandriva 2009, BIND 9.5.0-P2. Named will start however I'm getting the above error as well as these:
14-Mar-2009 15:45:37.084 general: error: zone 0.in-addr.arpa/IN: loading from master file /var/lib/named/var/named/reverse/named.zero failed: file not found
14-Mar-2009 15:45:37.084 general: error: zone 0.0.127.in-addr.arpa/IN: loading from master file /var/lib/named/var/named/reverse/named.local failed: file not found
[code].....
Named shows to be running but with the errors above I know it's not running correctly. I also copied the above dir's over to /var/lib/named/var/lib/named which is where I 'believe' it's chroot'd at, though I could be wrong since I'm unfamiliar with chroot.
I am using Cent OS 5.5 and i want configure DNS, but while configuring bind i am getting below error.
#/etc/init.d/named restart Stopping named: [ OK ]
Starting named:
Error in named configuration:
/etc/named.conf:57: open: /etc/named.root.hints: file not found[FAILED]
i downloaded a widget named yet another netspeed monitor.it is not working.it says please see the following image
View 4 Replies View Relatedi'm just trying to understand named pipes in linux.For that i'm just trying to create one named pipe using mkfifo.but its not working properly..following is my code snippet. so if anyone comes across the mistake i made
Code:
#include <stdio.h>
#include <errno.h>
[code]....
I am trying to configure my live install of fedora so a PC on the same intranet can access it by hostname instead of by IP address.After I installed bind, I realized the man pages recommended against bind and said instead to enable SELinux named. I tried to guess what variables to set after googling and studying the documentation and coming up empty. I used getsebool -a, and tried turning one and all on.I test using:nslookup myhostname on the linux box, since if that is working it isnt surprising that the windows box cant see it. what buttons to push to enable SELinux named, as described in fedora 13 man page for bin slight correction, the man page is for named. It says to remove the bind-chroot and use SElinux to enable named. I think I also have to create a new zone. This seems akin to proving fermats last theorem but less rewarding. anyone know what keys to push for either. I did get system-config-selinux running. I thought it was in an infinite loop but it does *eventually* load a gui. Also if you set a boolean it will grab all CPU for a couple of minutes. (used top in another terminal).
View 5 Replies View RelatedI use ubuntu 10.04 and here's the problem. I've installed pssh, but when I type pssh i got this message
Code:
# pssh
Traceback (most recent call last):
File "/usr/bin/pssh", line 29, in <module>
from psshlib.basethread import BaseThread
ImportError: No module named basethread
Also, if I type man pssh I got this message:
See 'man 7 undocumented' for help when manual pages are not available. I've reinstalled it, but nothing changed. I've found that basethread is located here:
/usr/lib/python2.5/site-packages/psshlib/basethread.py
/usr/lib/python2.5/site-packages/psshlib/basethread.pyc
I'm trying to understand dns and I think the following commands should give me an "OK" or something... what am I missing?
Code:
# dig @a.root-servers.net . ns >| db.root
# named-checkzone . db.root
zone ./IN: NS 'K.ROOT-SERVERS.NET' has no address records (A or AAAA)
zone ./IN: NS 'L.ROOT-SERVERS.NET' has no address records (A or AAAA)
zone ./IN: NS 'M.ROOT-SERVERS.NET' has no address records (A or AAAA)
zone ./IN: has 0 SOA records
[Code]...
I'm having some trouble with email being denied because of DNS and/or Reverse DNS issues. I'm hoping someone here is an expert and can shed some light on it for meWe have multiple subdomains, each having it's own entry in the zone file. However, the majority of our traffic goes out an aggregated external IP address with the exception of a few instances such as our mail server and our website(s).We currently have these three records in our example.com zone file:
Code:
example.com. IN A 11.22.333.44
www.example.com. 1H IN A 11.22.333.44
[code]...
i've made a big update of almost 300Mb.I'had a working DNS server.Now, when i boot the box, named works and it resolves all the clients.If i make any change (enter a new client for example) and of course i restart named (service named restart), named stop but does not start again !!!In order to get a working named, i 'm obliged to reboot the box?
View 6 Replies View RelatedI have a question with named and cname records. I wrote a CNAME record into a zone yesterday:
valami.teszt.hu. IN CNAME teszt.hu.
teszt.hu has an A record:
teszt.hu. 14400 IN A val.id.I.P
I restarted named. My problem is: when I visit valami.teszt.hu I get the "Apache is functioning normally" message, and not teszt.hu. And if I write an A record for valami.teszt.hu instead of CNAME record (valami.teszt.hu. 14400 IN A val.id.I.P), the valami.teszt.hu will display
message mentioned above too.
I'm reading up on some DNS and this section mentioned a /etc/named.d directory. I can't seem to find it - i have bind installed and i've searched on this directory, and the only realistic mention of it is from a post in a blog from 2001. I'm working in a FC12 environment...
View 1 Replies View RelatedHow do I join a Windows XP Workgroup named HOME?
View 1 Replies View RelatedIs it possible to change the location that the journal files are created. By default, they are created in the same location that the zone files are.
View 4 Replies View RelatedI've got a few processes running on my machine called simply '3'. I don't know what they are or where they have come from but all I know is that I don't want them there. I have to periodically type killall 3. This is the output from top, all processes listed are of this '3' type.
4804 tom 20 0 3356 752 656 R 2.3 0.0 3:40.75 3
4837 tom 20 0 3356 748 656 R 2.3 0.0 2:55.98 3
4844 tom 20 0 3356 752 656 R 2.3 0.0 2:50.06 3
[code]....
I have Red-Hat 5.6 , bind package and chroot installed, but i did not find the file named.conf in /etc !!!
View 3 Replies View RelatedSo I got my Fedora 12 (kernel 2.6.31.5-127.fc12) server behind router with static IP. My router configured so it redirects all ports queries to local adress appropriate ports and local adress is in DmZ.Iam trying to setup DNS on my server. My domain name provider already got domain name server pointed at my routers static IP.Then I used manuals and configured named as follows:
options {
listen-on port 53 { 127.0.0.1; };
listen-on-v6 port 53 { ::1; };
[code]....
I am running into problems when I try to install Altera's "Quartus 10 web edition 32 bit" on Fedora 14 (64bit). When I launch the installer I get the error message
Quote:
Traceback (most recent call last):
File "<string>", line 18, in <module>
File "/tools/python/2.6.4/linux32/pyinstaller/iu.py",
line 436, in importHook
[code]....
After that I ran altera's installer again and get the same error as above. Interestingly, if I now run the python command shell and try to import hashlib, that one is also broken again as above.
I am running named as a caching name server (package bind-9.7.3-1.fc14.x86_64 with config files exactly as supplied), and sometimes it does not shut down cleanly when I shut down the machine.The script /etc/ init.d/named tries to issue a "stop" command with rndc and that seems to fail most of the time; then it next uses the function killproc (defined in /etc/init.d/functions) which fails sometimes.I've hacked the named service script for now so that error messages are not hidden, but there is nothing reported.
View 2 Replies View RelatedI have a strange problem for internet. My clients (winxp - S2) can't get internet.Let me explain my scenerios. Fedora 10 with lan (eth0) having direct internet from dsl model, client (XP service pack 2) can use samba shares using dhcp (wlan0) installed in Fedora 10 box. client can ping my linux box.Now problem is: client (dosbox) can ping the google ip address (i.e ping 74.125.39.106) but can't use 'ping www.google.com'. That means ping with ip works for internet from my client. My linux box can. I can use internet from FC10 but can't use iexplorer from my client to have internet. I have enable ipmasquarding in Firewall and dhcpd is running on wlan0 for dynamic ip address of my clients.Can someone suggest me what kind of problem having I? What should i do to success iexplorer for internet? what possibly am i missing?
View 3 Replies View Relatedinstalling Frets On Fire with Fedora 11? I downloaded the binary from the website,tarred, installed everything mentioned in the read me and then ran the Frets On Fire .py file in the terminal, but I get a bad output.
Here it is:
Code:
/home/Reece/Download/Frets on Fire-1.3.110/src/Song.py:31: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
import sha
Traceback (most recent call last):
[code]....
I am trying to create a launcher in Fedora 13 which will run a simple script named proj4a. I run this script from the command line as follows:
$ $HOME/proj4a >$HOME/proj4a_out
where proj4a is an executable file in my home directory and the output goes into a file, proj4a_out, in my home directory. Everything works fine. I created a launcher called Proj4a and in the command field I entered the following:
' $HOME/proj4a >$HOME/proj4a_out'
When I click on the launcher it comes back with the following: There was an error launching the application.
I use named as a local caching nameserver (it has seemed the most stable DNS solution in the past given my ISP's flaky DNS servers) and I've noticed (since using fedora 12) a number of "broken trust chain" messages from named in /var/log/messages, for example:
Code:
named[986]: broken trust chain resolving 'www.bbc.net.uk/AAAA/IN': 212.58.224.20#53
I haven't made much sense of the things I've found via google, and am not even sure if this is a bad problem or not.
I tried doing nfs mount and it doesnt work for me. The following is the output of my "showmount -e <IP>"
Export list for <IP>:
/home/apchitra/workspace *
/home/apchitra/workspace/canmore/sdk/fsroot_2038 *
I am trying to mount one of these directories from other machine and it doesnt work. Gives me the following error.
Looking up port of RPC 100003/2 on <IP>
Looking up port of RPC 100005/1 on <IP>
mount: server 16.0.0.0 not responding, timed out
Root-NFS: Server returned error -5 while mounting /home/apchitra/workspace/canm8
VFS: Unable to mount root fs via NFS, trying floppy.
[Code]...
Something happened yesterday and now DNS is not working. I have checked /etc/resolv.conf and the settings are correct. I can ping my DNS servers and perform name lookups with dig but nothing else works. Normal applications do not work because of this.
View 3 Replies View Related