I want to setup bind9 so that IPs from one range will use the Google DNS Servers and IPs from another range will work from Opens DNS but am unable to get it working here are my configs.anyone that can help me please?
View 1 RepliesI have a named server that has forwarders setup. Quite often the dns server where I forward would not respond right away and the query would fail. It would then also cache the empty result for 3 hours and I would need to restart the service or clear the cache. how would I be able to specify a value for forwarders timeout, just like on Windows DNS.
BIND 9.3.6-P1-RedHat-9.3.6-4.P1.el5_5.3
I'm trying to setup a DNS name server using fedora14. Everything is working in the LAN, I've no errors in log/messages, but cannot ping outside world. Can ping IP addresses but not domain names.
View 4 Replies View RelatedI have Ubuntu 9.10 PC on my home network acting as a VPN gateway. It is using vpnc & iptables to provide access to the remote network - other computers on my local network have routing rules in place to go via the Ubuntu gateway if trying to reach an IP on the remote network. This works just fine, except DNS lookups for names on the remote network don't work.
I'm trying to solve this by using Bind9 on the gateway, so it can act as DNS for the local network. I don't want to create excess VPN traffic or load on the remote DNS, so I want the gateway to forward the lookup to my ISPs DNS first and if the name is not found then try the remote network DNS. Is this possible, or is there another (better) way around this? The Bind9 configs seem to admit multiple DNSs, but use them in a failover sense - only using secondary DNSs when the first one in the list is not reachable at all.
Here's my current setup:Ubuntu 10.04
When I go to run it via this command:
I get the following error message:
Quote:
This is my /etc/bind/named.conf.options file:
Code:
I've looked at various solutions already:
[url]
[url]
[url]
[url]
[url]
[url]
I am trying to setup a DNS server; where any names that can't be resolved would be forwarded to another server. In my local server, in the named.conf file, under options;The 1.1.1.1 above should have resolution for any outside addresses like URL...However, when I tried to ping yahoo.com from one of my internal machines, I couldn't get to yahoo.com.
View 11 Replies View RelatedI have setup ubuntu server and right now i'm trying to get my DNS server working for my intranet.
I'm using my ubuntu as gateway wo internet and somehow my windows client can't use my DNS service.
when i do nslookup www.google.com from my server (10.0.0.1) it return me answer code...
I have the following bind9 configuration, and I'm trying to resolve reverse lookup IP address to name.
$ttl 38400
mydomain.org.INSOAmyhosting.com. (
1243281304
10800
[code]...
** server can't find 1.2.3.4.in-addr.arpa: NXDOMAIN
Is my PTR wrong, or what do I need to have the reverse lookup working ?
Note: I replace real IP by 1.2.3.4, same for my domain name.
Set up a server with Bind, Dovecote, Apache etc. Registered a domain and made all the necessary things for it to work. The server can send/receive mail on my domain, but when I try to look up the site I have it returns a lookup failure. I know Apache is working as I can browse the site when I used my ip address but I can't when I use the domain name. Anyone got a few tricks I could try to dumb down and find the possible failures I did when setting this up?
View 7 Replies View Relatedwhen i try to set up bind9 to resolve the top level of the name it cant do it. for current sake of arguement i have 4 servers on the network
192.168.0.200 diana.undernets.lan
192.168.0.201 jen.undernets.lan
192.168.0.202 amanda.undernets.lan
192.168.0.203 alex.undernets.lan
those are the IP addresses of the servers and their respective hostnames
so if i send a request for anything to just undernets.lan it will fail because there is no record for that. so i added this to the bottom of the zone record
Code:
IN CNAME amanda
thinking that a blank would refer to the top of the zone
here is my named.conf.local which is called in my named.conf
Code:
zone "undernets.lan" {
type master;
file "/etc/bind/undernets.db";
};
zone "0.168.192.in-addr.arpa" {
[Code]....
i want to be able to lookup undernets.lan and it give me the IP address of amanda.undernets.lan
I'm trying to configure bind9 to block porn by having it pretend to be authoritative for a list of porn domains. It can then return a "fake" IP for the port sites, which points to a page on my server. So far, the only way I have found to do in this in bind requires a separate zone for each porn domain. This doesn't work because of memory problems - I have 1000's of porn domains to block.
I'd like to instead have bind forward queries to rbldnsd, which can take a list of domains in a "data set" file, and use it to return a single A record (pointing to my "access denied" page). However, I think this will not work because I would still need a separate "zone" for each porn domain name.
Im trying to set up a slave dns to my master, but the problem is that only one of the views is being transferd.
View 1 Replies View RelatedI have installed CentOS 5.5 final on VM ware 7.0 workstation.... and I was trying to install and configure bind9.. it installed alright but it refused to start because named.conf is not in the /etc/ directory. I have copied the template for /usr/share/doc/named/* to (/etc/ and /var/named/) the appropriate directory but it still fails but on it does not gives me any error message. Oh... least I forgot I was trying to configure it as a cache only server for now.
View 1 Replies View RelatedI am running centos 5.3 with the latest bind, i have made some changes in the config and now it wont start.
Fel i named-konfigurationen:/etc/named.conf:27: unexpected end of input (last line)
My named.conf looks like this:
options { directory "/var/named/";
};
view "externt" {
match-clients { any; };
recursion no;
zone "dala.hk" {
type master;
file "dala.hk";
};
zone "0.0.168.192.in-addr.arpa." {
type master;
file "1.0.168.192.in-addr.arpa";
};
};
view "intern" {
match-clients { 192.168.0.0/8;};
zone "intern" {
type master;
file "intern;
};
};
v10.4 {I have completely re-edited this thread because I have started over fresh. I am no longer using bind9, but now using the installation-defaults nameserver and dhcp and trying to get a handle on how things ought to be setup properly. My previous attempts was a disaster.}
Coming fresh out of a newly installed 10.4, I obviously was able to get network connectivity but then I ran into trouble the minute that I tried to change eth0/eth1 connections via network-manager's applet. What I found was, that when I attempted to define static connections, all bets were off. It seems that once one attempts to change eth0/eth1 which are wired devices, I was no longer able to recover my network connectivity!
I was however able to setup a wireless connection, so in this way I was able to get back network (and Internet) connectivity, and write this thread on this forum. I notice also, that there is no longer 'Networks' in the System->Administration menus! Geez, what the hell is going on? how to properly configure my static wired connection? Networks in 10.4 have really changed alot!
system: centos 5.5 Kernel 2.6.18-194.el5 freshly installed. bind is configured in chroot environment out of the box. placed named.conf in /var/named/chroot/etc and my zone files in /var/named/chroot/var/named.
[Code]...
I don't understand this error nor do I know how to solve the issue that is causing the error. Anyone care to comment?
Quote:
Error: Caching enabled but no local cache of //var/cache/yum/updates-newkey/filelists.sqlite.bz2 from updates-newkey
I know JohnVV. "Install a supported version of Fedora, like Fedora 11". This is on a box that has all 11 releases of Fedora installed. It's a toy and I like to play around with it.
I was laughing about klackenfus's post with the ancient RH install, and then work has me dig up an old server that has been out of use for some time. It has some proprietary binaries installed that intentionally tries to hide files to prevent copying (and we are no longer paying for support or have install binaries), so a clean install is not preferable.
Basically it has been out of commission for so long, that the apt-get upgrade DL is larger than the /var partition (apt caches to /var/cache/apt/archives).
I can upgrade the bigger packages manually until I get under the threshold, but then I learn nothing new. So I'm curious if I can redirect the cache of apt to a specified folder either on the command line or via a config setting?
I installed squid cache on my ubuntu server 10.10 and it is work fine but i want to know how to make it cache all files like .exe .mp3 .avi ....etc. and the other thing i want to know is how to make my client take the files from the cache in the full speed. since am using mikrotik system to use pppoe for clients and i match it with my ubuntu squid
View 1 Replies View RelatedI am reading slab allocator, it defines slab cache, i am quite confuse is it same as hardware cache?
View 2 Replies View Relatedi was looking for a way to stop my menus taking a few seconds to load my icons when i first open them and found a few guides suggesting using the gtk-upate-icon-cache command, but with the any colour you like icon theme i'm using (stored in my home folder .icons directory) i kept getting a "gtk-update-icon-cache: The generated cache was invalid." fault i used the inbuilt facility in the acyl script to copy the icons to the usr/share/icons directory and tried the command again, this time using sudo gtk-update-icon-cache --force --ignore-theme-index /usr/share/icons/ACYL_Icon_Theme_0.8.1/ but i still get the same error. i tried with several of the custom icon themes i've installed and only 1 of the first 7 or 8 i tried successfully created the cache.
View 4 Replies View RelatedI have an old pentium 3 computer that has ~7 NICs installed. These NICs are attached to modems and other networking equipment. According to the linux ping page on computerhope.com, it seems that one could send a ping from a certain specified NIC. How would one go about this?
View 6 Replies View RelatedI have a CentOS 5.3 box with three network interfaces in it. Each interface is attached to a separate VLAN and I want traffic to stay on each network segment.What I can�t figure out is why I cannot get each interface to have its own gateway and everything gets sent through the default gateway.The basically takes my possible 3Gb total bandwidth and throws it down a single 1Gb pipe.Then on top of that, if I take down the interface (ifdown) that has the current default gateway,I loose contact to the other two interfaces.When I look at the routes, each one of the interfaces shows the gw as 0.0.0.0 and defers to the default route. So I delete the route and try to add a new route with:
[root@testsan ~]# ip route add 10.1.15.0/24 via 10.1.15.1 dev eth2
but end up with the error:
RTNETLINK answers: Network is unreachable
[root@testsan sysconfig]# cat network
NETWORKING=yes
NETWORKING_IPV6=no[code].....
I just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
Code:
/etc/resolv.conf:
Code:
Code:
rev.0.168.192.in-addr.arpa:
Code:
I'm using an embedded linux with a TX25 starterkit board.To start, this board proceeds as below :1. connect to my PC to download the kernel (using a ftp connection).2. uncompress the kernel and start it.3. connect to my pc to mount the root file system using nfs.. start the system.Everything works fine, except that I noticed there's maybe a nfs cache issue.for example, if a program run on the board creates a file in /home, I can see it from my PC (nfs server). => perfect !But if a program creates a file in /var/lib/dpkg/, I can see it from the board but not from my PC, so when I restart the board everything is lost.It seems to be a bad configuration.I tried to restart the nfs and nfslock services.here is my /etc/eports file.
Code:
/tftpboot/rootfs_tx25 192.168.1.188(rw,no_root_squash,sync)
I tried to use async.
I have set up a gateway machine in debian lenny
internet is shared to the localnetwork by using squid as proxy server Can I improve the performance if I set up this machine as DNS cache server?
What is the result if I set this machine as Primary DNS?
store the dns cache over the reboot in linux(which should not flush the dns cache on reboot).
View 2 Replies View RelatedDoes anybody have some thoughts about a local dns server cache size? What is the optimal one? In terms of memory consumption and number of re-enters into the cache. Lets say that default size is 150, so I've change this to 500 and after some time I see 379 re-enters into the cache. Simply put I need to increase the cache size 2 times. But due to the fact that browser preloads dns names it is not possible to interpret the number of overwrites in terms that it is not possible to say if useful cache entries were overwritten or those that the browser precached ( in other words not needed ). In this case it is ok to overwrite unwanted entries because it is not likely that I'll need these entries anyway
I'm running the dnsmasq on an embedded system with limited ram and with an umts dongle attached. It is important to keep the cache size as small as possible to reduce memory usage and at the same time to reduce number of external lookups because dns latency of the umts connection is high (1-2sec for the dns query)
When I run ddclient with an existing ddclient.cache file I get errors saying "uninitialized value" and the remote IP address does not get updated. This pretty much renders ddclient useless. If I delete the cache file then things work fine and the IP address *does* get updated (if need be). I happen to be running version 3.7.3 of ddclient but I've tried this with ddclient 3.8.0 and the result is exactly the same except that the line number in the error changes to line 2030.
Here's the code at that line number :
Code:
if ($config{$host}{'login'} eq '') {
warning("null login name specified for host %s.", $host);
I'm running ubuntu ( 9.04 I think ) and using zoneedit.com for dynamic dns.
Here's a transcript showing the problem.
root@ruby:/var/cache/ddclient# ddclient
[Code]...
I have a Slackware 13.0 server that is not replying to icmp pings. However, I have double checked that /proc/sys/net/ipv4/icmp_echo_ignore_all is set to 0. The weird thing is I can run nc -v slackware 22 from any computer on my lan and the banner comes up just fine. The nic is on the same netmask and broadcast as all the other computers on my lan. I can log into it as well, it just doesn't respond to pings. I can even ping other computers and get replies just fine when pinging from inside the Slackware server.
I have even added an iptables INPUT rule for -p icmp -j ACCEPT. Although I've never had to do this. I ran tcpdump -vv icmp and I can see ping requests coming into the computer, however slackware simply doesn't respond. What could be causing this? A corrupt arp cache? It's been happening for more than a few hours so I wouldn't think so. How can I view the arp cache table? How do I clear it?