Red Hat / Fedora :: Cannot Find The Named.conf
Mar 14, 2011I have Red-Hat 5.6 , bind package and chroot installed, but i did not find the file named.conf in /etc !!!
View 3 RepliesI have Red-Hat 5.6 , bind package and chroot installed, but i did not find the file named.conf in /etc !!!
View 3 RepliesI am using Cent OS 5.5 and i want configure DNS, but while configuring bind i am getting below error.
#/etc/init.d/named restart Stopping named: [ OK ]
Starting named:
Error in named configuration:
/etc/named.conf:57: open: /etc/named.root.hints: file not found[FAILED]
Is it possible to change the location that the journal files are created. By default, they are created in the same location that the zone files are.
View 4 Replies View RelatedOS CentOS 5.4 I have a DNS server that is logging all named and dns requests to the chrooted named directory. By default named logs to /var/log/messages but I want to isolate all the dns queries and requests to separate files. I know I can add entries to /etc/syslog.conf to "roll" the logs and logrotate should pick them up but fuzzy as to the syntax. I don't know what "tag" to use in the first fieild. for example
# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none;cron.none/var/log/messages
Here is the logging section of my named.conf
# pwd
# /var/named/chroot/etc
logging
{
[code]....
phpmyadmin files are in usr/share/phpmyadmin but i cant find anything in my apache2.conf or httpd.conf files that point to that directory.How do I find the route taken from the Server root "ServerRoot "/etc/apache2"" to the phpmy admin files.
View 5 Replies View RelatedI just installed Fedora 12 on a RM (research machines) nBook 4000.
Whilst the trackpad allows me to move the mouse pointer about, it doesn't respond to tapping. Is there anything I can do to get it working properly?
Also, the laptop has an integrated Intel 82852/82855 GM/GME graphics card. How can I tell if it is being detected and working properly? I don't seem to have an xorg.conf file.
Just have F-13 32 bit installed. But can't find xorg.conf. The screen resolution is only 800x600. The LCD display and the video card can support 1640x1280. Please where can I find a standard xorg.conf. Or how to create it here?
View 14 Replies View RelatedWhere can I find the httpd.conf files in FC11 ??
View 1 Replies View RelatedI am not able to find /etc/resolve.conf on my centos machine.it says no such file or dir .with out this file i am not able to connect to internet.when i ping my localhost and my machines ip address i am getting a reply.but when i ping some domain(eg - google.com) i get no reply.i tried manually entering the dns nameserver from system->adminstration->network->dns tab.i dono what ip to enter there..
View 2 Replies View RelatedMandriva 2009, BIND 9.5.0-P2. Named will start however I'm getting the above error as well as these:
14-Mar-2009 15:45:37.084 general: error: zone 0.in-addr.arpa/IN: loading from master file /var/lib/named/var/named/reverse/named.zero failed: file not found
14-Mar-2009 15:45:37.084 general: error: zone 0.0.127.in-addr.arpa/IN: loading from master file /var/lib/named/var/named/reverse/named.local failed: file not found
[code].....
Named shows to be running but with the errors above I know it's not running correctly. I also copied the above dir's over to /var/lib/named/var/lib/named which is where I 'believe' it's chroot'd at, though I could be wrong since I'm unfamiliar with chroot.
How do you find out what the bootloader configuration file is named? I am setting file permissions...would it be wise to set the entire boot directory to 700?
View 3 Replies View RelatedHow can I find a list of files that are named duplicates i.e. have same name but in different case that exist in the same directory?
View 7 Replies View RelatedI can't find smtpd.conf as described here: https://help.ubuntu.com/community/Postfix
Do I create the file or do I have to do something to install saslauth?
Ubuntu 10.04
I can't find xorg.conf on /etc/X11/ How to create it?
I'm reading about how to set log options and I can't find /etc/syslog.conf?
I'm using fedora12 , ubutnu 10.04 and suse 11.2.
And Can't find syslog.conf anywhere.
I've been trying to setup dual-screen in my system, but the control panel complains it can't find xorg.conf and so I can't save changes I make in the nvidia control panel. I was trying various methods of trying to get a dual screen working how I like it.Left = 17" 1280x1024 that sometimes works (needs hitting a few times)Right = 21" 1680x1050 main screenI wanted to have everything on the right one, my main workspace. And I wanted a seperate x workspace on the left hand one. (Mainly so that when the one on the left decides to not work, I can use the panel thing at bottom to move apps to the right one)
Now I know since 9.10 xorg.conf is non-existant and so determind on the fly or something.Is there a way to get X to write out the current working xorg.conf that's it's using? i.e. It's auto determind x,y,z and that's what right now this second is being used. I want to save this as a working xorg.conf so I can fine tune it etc.
I am trying to edit the xorg.conf file as described here:
[URL]
However, I cannot find the xorg.conf file anywhere.
I can not find xinetd.conf on my server (CentOS 5.4 operation system).
View 2 Replies View RelatedI have managed to delete my yum.conf file and do not have a backup. I have tried reinstalling yum and it does complete but when I try and run yum I get cannot find any conf file. Is there a standard conf file I can download? I am running centos 5.3.
View 8 Replies View RelatedI have the following section in xorg.conf
Section "Device"
Identifier "Default Device"
Driver "fglrx"
EndSection
In what directory does it look to find the fglrx driver?
i have dual boot system with windows7 and ubuntu 9.04 i am unable to find lilo.conf file in /etc. what's this file? what to do?
View 2 Replies View RelatedI am trying to get a touchscreen driver installed and I am talking to the techs at the company and they asked for a copy of my xorg.conf file. I have done several searches on my computer and looked on other forums posts as to where that file should be located and I cannot find this file anywhere on the system. Does Ubuntu 10.4 even have a xorg.conf file?
View 2 Replies View RelatedI am currently running Jaunty 9.04 and find the xorg.conf in /etc/X11. I just booted Lucid 10.04 from the Live CD just to take a look at things. I could no longer find xorg.conf any place in the booted file system.
View 1 Replies View RelatedHow do i find the file /etc/rsyslog.conf so i can modify it.
View 1 Replies View RelatedHow can I find the size of units in sysctl.conf e.g whatis the size of the shmmax variable i.e. is it byte kb , Mb etc....???
View 8 Replies View RelatedI deleted the snmptrapd.conf from /etc/snmp/ and now I want to see the default content to create that file.. Been searching the web but can't find it.
View 2 Replies View RelatedI am unable to find any ldap.conf parameter or pam.d/system-auth setting from where i can restrict the LDAP users having uidNumber less than a particular number, say 500 to login into the system.I am using OpenLDAP server and tried pam_max_uid 500 in ldap.conf but it didn't work.
View 2 Replies View RelatedUsing google with search option: cman not started: Can't find local node name in cluster.conf /usr/sbin/ cman_tool: aisexec daemon didn't start.I found this URL...I have found the config_version in cluster.conf. Unfortunately, as everyone may have noticed, english is not my native tongue so I am having trouble understanding the part "Make sure you bumped the cluster config version number". Can anyone enlightened me on what should I be doing so that I could "bump" the cluster config version?
View 3 Replies View RelatedIf I do something to the effect of this:ldapsearch -b "dc=example,dc=com" -x -z 3000
I'll get this back at the end of the result set:
# search result
search: 2
result: 4 Size limit exceeded
The thing is is that I have way more (thousands) than what's being displayed here. And I've tried to mess around with /etc/ldap.conf, changing the SIZELIMIT directive to something else, 10000, let's say, and restarting the server, but the same goddamn thing happens.
I've been messing around with this for quite some time now, hopefully someone will be able to shed some light on this so that I can learn my way out of this mess that is LDAP. Also in a related matter, I'm running Mint (based off of Ubuntu), and all the documentation that I've seen (probably read a good 100+ pages in a few days now on this) keeps telling me to make changes to my slapd.conf file. What slapd.conf file? It doesn't exist, I can't find it at least. find / -name slapd.conf turns up nothing.
i've made a big update of almost 300Mb.I'had a working DNS server.Now, when i boot the box, named works and it resolves all the clients.If i make any change (enter a new client for example) and of course i restart named (service named restart), named stop but does not start again !!!In order to get a working named, i 'm obliged to reboot the box?
View 6 Replies View Related