I'm reading up on some DNS and this section mentioned a /etc/named.d directory. I can't seem to find it - i have bind installed and i've searched on this directory, and the only realistic mention of it is from a post in a blog from 2001. I'm working in a FC12 environment...
View 1 RepliesI need to create a directory named just like his parent.
Example:
I tried this but because there is "Space Characters" in the name of Parent directory, my script fails.
Mandriva 2009, BIND 9.5.0-P2. Named will start however I'm getting the above error as well as these:
14-Mar-2009 15:45:37.084 general: error: zone 0.in-addr.arpa/IN: loading from master file /var/lib/named/var/named/reverse/named.zero failed: file not found
14-Mar-2009 15:45:37.084 general: error: zone 0.0.127.in-addr.arpa/IN: loading from master file /var/lib/named/var/named/reverse/named.local failed: file not found
[code].....
Named shows to be running but with the errors above I know it's not running correctly. I also copied the above dir's over to /var/lib/named/var/lib/named which is where I 'believe' it's chroot'd at, though I could be wrong since I'm unfamiliar with chroot.
I have a site's url. I have it's ftp admin username and passwd..How can I upload there ( in / directory ) a file named app.log using curl ?I read the manual but I understood nothing
View 2 Replies View Related3.What /etc/exports entry would export a directory named /nfs to all clients on the subnet 192.168.10.0 and give them read-only access?
View 3 Replies View Relatedhow do i remove it?
View 4 Replies View RelatedCode:
$ echo 2 * 3 > 5 is a valid inequality. This will create a file in the current directory named '5' with the number '2' in it, the names of all the files in the current directory, followed by the number '3' and 'is a valid inequality.'
What I do not understand is why 'is a valid inequality' gets written to this file. I thought it would write '2', all the file names in the current directory, then '3' into the file called '5'. Why does the 'is a valid inequality.' get written to the file also?
I am using Cent OS 5.5 and i want configure DNS, but while configuring bind i am getting below error.
#/etc/init.d/named restart Stopping named: [ OK ]
Starting named:
Error in named configuration:
/etc/named.conf:57: open: /etc/named.root.hints: file not found[FAILED]
i've made a big update of almost 300Mb.I'had a working DNS server.Now, when i boot the box, named works and it resolves all the clients.If i make any change (enter a new client for example) and of course i restart named (service named restart), named stop but does not start again !!!In order to get a working named, i 'm obliged to reboot the box?
View 6 Replies View Relatedhost A: Fedora 7 has bind 9.4.2
host B: Fedora 11 has bind 9.6.1
I want to migrate my bind configuration from A to B I've read the release notes and man pages and I can't see why copying
/etc/named*
and
/var/named/*
I checked /etc/sysconfig/named too... Seems to have no effect on my brand new install on Fedora 11. Host B stays basically un-configured.
I've got a few processes running on my machine called simply '3'. I don't know what they are or where they have come from but all I know is that I don't want them there. I have to periodically type killall 3. This is the output from top, all processes listed are of this '3' type.
4804 tom 20 0 3356 752 656 R 2.3 0.0 3:40.75 3
4837 tom 20 0 3356 748 656 R 2.3 0.0 2:55.98 3
4844 tom 20 0 3356 752 656 R 2.3 0.0 2:50.06 3
[code]....
I have Red-Hat 5.6 , bind package and chroot installed, but i did not find the file named.conf in /etc !!!
View 3 Replies View RelatedI am new in configuring named.I want to set my firewall (Fedora 11) as a name server. The local domain is a Windows domain. I'd like internal users translate domain name into IP on this server when they go to the internet. After reading some posts on the web, I set up named as below. It seems the named does the job but with some problems.
1) When I start the server, I couldn't find the named process even if the file "named" is in /etc/init.d. I can browse Internet on the server with domain name (DNS works locally). But internal users couldn't get the domain name translated. If I shutdown the server at this stage, it will shutdown within 1 minute.
2) If I run "service named start" after the server boot up, I see process "named" and named work okay. Both internal user and local host can browse Internet with domain name. However, any command starting with "service named" has no response after this, such as "service named status" or "service named stop". I can see it shows "stopping named" and this last forever. I have to kill the process then restart named server so that named may run again.
3) If I shutdown the server now, it will take 4-5 minute instead of 1 minute in 1). The shutdown stuck at "shutdown named" for 4 minutes. Even if I kill process named before the shutdown, it will take 4-5 minutes.
It took me a week on this issue. I appreciate if you could take a look my configure files and guide me through this.
So I got my Fedora 12 (kernel 2.6.31.5-127.fc12) server behind router with static IP. My router configured so it redirects all ports queries to local adress appropriate ports and local adress is in DmZ.Iam trying to setup DNS on my server. My domain name provider already got domain name server pointed at my routers static IP.Then I used manuals and configured named as follows:
options {
listen-on port 53 { 127.0.0.1; };
listen-on-v6 port 53 { ::1; };
[code]....
I am running into problems when I try to install Altera's "Quartus 10 web edition 32 bit" on Fedora 14 (64bit). When I launch the installer I get the error message
Quote:
Traceback (most recent call last):
File "<string>", line 18, in <module>
File "/tools/python/2.6.4/linux32/pyinstaller/iu.py",
line 436, in importHook
[code]....
After that I ran altera's installer again and get the same error as above. Interestingly, if I now run the python command shell and try to import hashlib, that one is also broken again as above.
I am running named as a caching name server (package bind-9.7.3-1.fc14.x86_64 with config files exactly as supplied), and sometimes it does not shut down cleanly when I shut down the machine.The script /etc/ init.d/named tries to issue a "stop" command with rndc and that seems to fail most of the time; then it next uses the function killproc (defined in /etc/init.d/functions) which fails sometimes.I've hacked the named service script for now so that error messages are not hidden, but there is nothing reported.
View 2 Replies View RelatedI'm trying to setup a DNS name server using fedora14. Everything is working in the LAN, I've no errors in log/messages, but cannot ping outside world. Can ping IP addresses but not domain names.
View 4 Replies View Relatedinstalling Frets On Fire with Fedora 11? I downloaded the binary from the website,tarred, installed everything mentioned in the read me and then ran the Frets On Fire .py file in the terminal, but I get a bad output.
Here it is:
Code:
/home/Reece/Download/Frets on Fire-1.3.110/src/Song.py:31: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
import sha
Traceback (most recent call last):
[code]....
I am trying to create a launcher in Fedora 13 which will run a simple script named proj4a. I run this script from the command line as follows:
$ $HOME/proj4a >$HOME/proj4a_out
where proj4a is an executable file in my home directory and the output goes into a file, proj4a_out, in my home directory. Everything works fine. I created a launcher called Proj4a and in the command field I entered the following:
' $HOME/proj4a >$HOME/proj4a_out'
When I click on the launcher it comes back with the following: There was an error launching the application.
I have a server with Fedora 13 with which I would like to get NFS working. I have looked up multiple howto's and tutorials, but I'm having a problem not addressed by any of them.Official how-to, another how-to, and another how-to.I have verified that nfs-utils, nfs-utils-lib, portmap, and system-config-nfs are installed and running. I have verified that I have, in fact, shared the directory that I want to share, and that the proper permissions are set.
I had to go through some gyrations to get the Belkin wireless N router to allow my server to have a static IP. However, I can ping the server from the nfs client (a toshiba satellite running mint 8), and vice versa. I have (for now) disabled firewalls on both computers. I think I have disabled SELinux on Fedora 13 (for now).When I attempt to connect to the server from the client, the output looks like this:Quote:
aragorn ~ # mount -v 192.168.2.101:/test /home/kelev/test/
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Sat Dec 18 12:21:09 2010
[code]....
i want to copy a few files from my windows directory into the wine directory - its no big deal, just a few preference files so i dont have to set something up all over again. trouble is, i had the files copied, but i cant find the wine/ c: drive directory anywhere, anyone know where this can be found??
View 8 Replies View RelatedI use named as a local caching nameserver (it has seemed the most stable DNS solution in the past given my ISP's flaky DNS servers) and I've noticed (since using fedora 12) a number of "broken trust chain" messages from named in /var/log/messages, for example:
Code:
named[986]: broken trust chain resolving 'www.bbc.net.uk/AAAA/IN': 212.58.224.20#53
I haven't made much sense of the things I've found via google, and am not even sure if this is a bad problem or not.
I am trying to configure my live install of fedora so a PC on the same intranet can access it by hostname instead of by IP address.After I installed bind, I realized the man pages recommended against bind and said instead to enable SELinux named. I tried to guess what variables to set after googling and studying the documentation and coming up empty. I used getsebool -a, and tried turning one and all on.I test using:nslookup myhostname on the linux box, since if that is working it isnt surprising that the windows box cant see it. what buttons to push to enable SELinux named, as described in fedora 13 man page for bin slight correction, the man page is for named. It says to remove the bind-chroot and use SElinux to enable named. I think I also have to create a new zone. This seems akin to proving fermats last theorem but less rewarding. anyone know what keys to push for either. I did get system-config-selinux running. I thought it was in an infinite loop but it does *eventually* load a gui. Also if you set a boolean it will grab all CPU for a couple of minutes. (used top in another terminal).
View 5 Replies View RelatedI try to install one program called "iprint" but it tell me that I missed on package named "cup-libs-32bit" and after I search for that file, I found out it 's not fedora package but it is opensuse package. I wonder what the package is the same package with cup-libs-32bit for fedora. this is how it show after I try to install
[ESPADA@localhost iprint]$ rpm -Uvh novell-iprint-xclient.x86_64.rpm error: Failed dependencies: cups-libs-32bit is needed by novell-iprint-xclient-sl-6.500.20081007-1.x86_64
I'm trying to separate DNS log entries from messages and have them write to their own log file "named.log". I'd like this file to end up as /var/log/named.log
View 1 Replies View RelatedI am trying to encrypt a file on-the-fly, redirecting the output to a named pipe [fifo]. I SSH into my server and run the command:mcrypt -k key < file > named_pipethen from my laptop I try to scp it:$ scp me@server:~/dir/named_pipe d it says scp:users/home/me/dir/named_pipe: not a regular file
View 1 Replies View RelatedWhy is freetype 2 put up as libfreetype6 ? What's the history/reasons behind the same ? This is the way it looks in my shell.
$ aptitude show libfreetype6
Package: libfreetype6
State: installed
Automatically installed: yes
[code]....
I am simply not getting it . Also would it mean that in future, freetype 3 (whenever that becomes/happen) it would be named as libfreetype7 or what ?
We have a MS Windows domain in our school. Some time ago, when I was toying with an earlier version of Opensuse, I joined a box to our domain. I am trying 11.2 now, and my box is box is being named automatically, to what I named the previous box (which is long gone). I guess this is an issue with my Windows domain controller, but I'm not sure what to do about it. The domain controller is running Windows Server 2008 Enterprise.
View 4 Replies View RelatedI am running opensuse 11.0 on Intel Quad computer. A month ago I have installed DNS service on it.
Since then I have a following problem - sometimes named starts eating 200% of CPU and that causes LAN to hang down. Everything goes normal after named restart.
One of the dedicated servers that I have does not seem to have the service 'named' functional:
root@server2 [~]# service named start
Locating /var/named/chroot//etc/named.conf failed: [FAILED]
Note that the double slashes (//) ARE part of the output as well as the long gap before [FAILED] appears. This 'named' service not being functional is not a problem which is preventing the server / the application on it from working. There are entries in /etc/resolv.conf though.