Networking :: DNS Named Bind Configure Noob?
Jan 23, 2010
I'm trying to understand dns and I think the following commands should give me an "OK" or something... what am I missing?
Code:
# dig @a.root-servers.net . ns >| db.root
# named-checkzone . db.root
zone ./IN: NS 'K.ROOT-SERVERS.NET' has no address records (A or AAAA)
zone ./IN: NS 'L.ROOT-SERVERS.NET' has no address records (A or AAAA)
zone ./IN: NS 'M.ROOT-SERVERS.NET' has no address records (A or AAAA)
zone ./IN: has 0 SOA records
[Code]...
View 9 Replies
ADVERTISEMENT
Aug 12, 2009
host A: Fedora 7 has bind 9.4.2
host B: Fedora 11 has bind 9.6.1
I want to migrate my bind configuration from A to B I've read the release notes and man pages and I can't see why copying
/etc/named*
and
/var/named/*
I checked /etc/sysconfig/named too... Seems to have no effect on my brand new install on Fedora 11. Host B stays basically un-configured.
View 2 Replies
View Related
Jun 22, 2011
I'm having some trouble with email being denied because of DNS and/or Reverse DNS issues. I'm hoping someone here is an expert and can shed some light on it for meWe have multiple subdomains, each having it's own entry in the zone file. However, the majority of our traffic goes out an aggregated external IP address with the exception of a few instances such as our mail server and our website(s).We currently have these three records in our example.com zone file:
Code:
example.com. IN A 11.22.333.44
www.example.com. 1H IN A 11.22.333.44
[code]...
View 5 Replies
View Related
Feb 9, 2010
I know BIND is one of the most popular DNS servers used today but does anyone have any tips on how to configure BIND?
View 1 Replies
View Related
Dec 20, 2010
don't find box of BIND so i was posting into this boxI have some problem when i config bind DNS for my domain and then i can't start named,this's error message
[root@server1 named]# service named restart
Stopping named: [ OK ]
Starting named:
[code]....
View 1 Replies
View Related
Mar 31, 2010
I am trying to configure a BIND DNS server to handle three websites on my home network, (my site, my sons site and our test site). Since my ISP uses dynamic DNS, we are using DNS2GO to redirect our traffic, 9EACH SERVER HAS IT'S OWN VERSION OF dns2go running).
My problem is that I can't figure out how to configure BIND since I don't have a static IP to enter into the named.conf or reslov.conf configuration files.
View 5 Replies
View Related
Mar 31, 2010
I am trying to configure a BIND DNS server to handle three websites on my home network, (my site, my sons site and our test site). Since my ISP uses dynamic DNS, we are using DNS2GO to redirect our traffic, 9EACH SERVER HAS IT'S OWN VERSION OF dns2go running).My problem is that I can't figure out how to configure BIND since I don't have a static IP to enter into the named.conf or reslov.conf configuration files.
View 7 Replies
View Related
Oct 12, 2010
I meet this problem after i reformat the CentOS 5...I havent do any configuration, the named service start failed ? why ....
View 2 Replies
View Related
Jan 28, 2009
I updated bind to version bind-9.3.4-6.0.3.P1.el5_2 today, and then I started getting "Starting named: named: user 'named' unknown" messages. Selinux is enabled.
ID named shows:
uid=25(named) gid=25(named) groups=25(named) context=root:system_r:unconfined_t:SystemLow-SystemHigh
View 2 Replies
View Related
May 7, 2009
Ubuntu ver 8.04.1 and Bind ver 9.4.2
I've set this up as a primary dns server, Bind is the only thing running on it, no gui, etc. I followed the default settings so I have a named.conf, named.conf.options, and named.conf.local file.
I have a log file I labeled as named.log in this path /var/log/bind. I'm using logrotate to rotate out the file.
My problem is that after syslogd restarts in the morning. My named.log file don't start logging info until I restart Bind. The new named.log file gets created and the old files rotate out and compress. All of the other log files in /var/log, syslog, messages, mail, etc, rotate out and compress like they should, after syslogd restarts.
I know that I could restart Bind using Cron but I shouldn't have to.
Below are snips of the files I'm using.
I named this one 'bind' and it's in the directory /etc/logrotate.d
View 8 Replies
View Related
Jan 22, 2010
finnaly i can run my ubuntu server 9.04 well, thnx to this great member of ubuntuforums.org now, i wanna i wannna install SNMP on my system, but after i do that, when i wanna connect with another client, it give me error like this :
Code:
no response received
SNMPv1_Session (remote host: "10.100.7.179" [10.100.7.179].161)
community: "public"
request ID: 862383236
PDU bufsize: 8000 bytes
[Code]...
10.100.7.179 is my client, i allready install snmp agent on it. but why still eror then? plz give some help. thnx before
View 1 Replies
View Related
Dec 7, 2010
I and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
View 6 Replies
View Related
Sep 3, 2009
I am configuring bind9 on fedora 9(sulphur).I have configured /etc/named.conf and created zone file in /var/named/I have started the service but when I am executing the command nslookup mydomain.com it is not able to resolve the name.Another problem I am facing when I do telnet localhost 53,I am able to connect.but when I do telnet myip 53 it does not connect.Seems to be a firewall problem but I ve disabled iptables selinux completely even I ve disabled dnsmasq but still not working.
View 1 Replies
View Related
Mar 14, 2009
Mandriva 2009, BIND 9.5.0-P2. Named will start however I'm getting the above error as well as these:
14-Mar-2009 15:45:37.084 general: error: zone 0.in-addr.arpa/IN: loading from master file /var/lib/named/var/named/reverse/named.zero failed: file not found
14-Mar-2009 15:45:37.084 general: error: zone 0.0.127.in-addr.arpa/IN: loading from master file /var/lib/named/var/named/reverse/named.local failed: file not found
[code].....
Named shows to be running but with the errors above I know it's not running correctly. I also copied the above dir's over to /var/lib/named/var/lib/named which is where I 'believe' it's chroot'd at, though I could be wrong since I'm unfamiliar with chroot.
View 14 Replies
View Related
Feb 12, 2010
I am using RHEL5. I don't know to configure bind. plz give me step by step bind configuration process.
View 4 Replies
View Related
Mar 3, 2011
I am a newbie in configuring linux servers. Can I have an easy step-by-step walkthrough for bind 9 with chroot on RedHat enterprise 5 .
View 3 Replies
View Related
Oct 21, 2010
Could someone give me some direction on how to use the IRC channels. I want to register an account, and i found the procedure documented here: URL..I see the commands i have to type, but i'm a little unclear where it needs to be typed. Where is the "server tab"?I probably just over-complicating this. I need someone whose done this before to steer me right.Also what is the best IRC clients to use? I have Xchat and pidgin installed. Xchat keeps crashing on me every 5 minutes, not sure whats going on there.
View 3 Replies
View Related
Dec 9, 2010
I've been trying to get my GetNet 300 GN-621U USB wireless device working for a while now. When I first booted into my clean meerkat 64-bit install, both my wired and wireless were visible in network connections but neither could connect. I have since figured out what was wrong with the internal NIC and am happy to say i'm connected to the net, but need wireless to work. Having blacklisted the generic wireless driver, i see nothing anywhere that the device is on the system
My initial attempt led me down the route of installing ndisgtk for running the windows driver. I've since removed the driver/device from Windows Wireless Devices and have been trying to install the bona fide linux driver from getnet.
[Code]...
View 1 Replies
View Related
May 23, 2011
I am using ubuntu 11.04 I believe and I am a noob to using ubuntu all together now I need to connect to the internet via my router wireless Is there a good tutorial I can be linked to or if someone could provide the steps that would be awesome I have a "broadcom 802.11n network adapter"
View 3 Replies
View Related
Mar 17, 2011
this is my first post i have this error in ./configure for bind 9.7.3: checking for OpenSSL library... using OpenSSL from /usr/lib and /usr/includechecking whether linking with OpenSSL works... yeschecking whether linking with OpenSSL requires -ldl... unknown configure: error: OpenSSL has unsupported dynamic loading
View 1 Replies
View Related
Jun 29, 2011
Sorry about this but I'm trying to find out why ubuntu wi-fi isn't working now on my laptop (it was last night). I am following a tutorial that says to start..Open a terminal window (such as gnome-terminal), and enter the following command:
nm-tool Umm..how do I open a teminal window? I know how to run a DOS prompt in Windows but no idea how to find "gnome-terminal" or run a command in ubuntu.
View 9 Replies
View Related
Nov 5, 2010
to be able to work on my novel on both my laptop and workstation. how i want it. if i'm at my workstation, i'll have my laptop. if i'm on laptop, i may be away from workstation. so it makes sense that perhaps i could have it so that i only really have a copy on my laptop, that can be accessed from my workstation too. alternatively, having a two way sync-up so whichever is newer updates versons on each, could be a more sensible aproach. having only a copy on my workstation, accessable from the laptop is less welcome, since sometimes i'll be in an area with my laptop without an internet connection, and still want to be working on that file.
setting up my machines so i have full access to each from each, would be extra ideal, and something i've wanted for a while, but never got around to. i've never set up file sharing before, and from my prior limited knowledge, and today's searches on the topic, i find there are many many options available to me. i am on a deadline ("nanomo") and can't really devote the time to do a more thorough investigation of the methods of how to set this up and how to specifically achieve it.
the workstation runs toorox (gentoo), and the laptop has a dual boot of arch and crunchbang (ubuntu).
as i say, i'm on limited time here, and am just looking more for the quick fix just now, rather than ultimate knowledge n power. i need it now, i dont need it perfect, so to speak. though i see no need to compromise security to achieve these ends, i'm not in that much frantic desperate urgency for it.
View 2 Replies
View Related
Apr 1, 2011
I am using Cent OS 5.5 and i want configure DNS, but while configuring bind i am getting below error.
#/etc/init.d/named restart Stopping named: [ OK ]
Starting named:
Error in named configuration:
/etc/named.conf:57: open: /etc/named.root.hints: file not found[FAILED]
View 2 Replies
View Related
May 18, 2011
A create an application which has to bind to port less than 1024 and must be launched under non-root user. OS: Ubuntu 10.04. Decision 1: Using a firewall to redirect packets. Problem: This decision is not good for me. I need simple way to solve the problem. Decision 2: Use CAP_NET_BIN_SERVICE. Problem: My execution file has 2,7G size. It is very big application with a lot of debug info. setcat command return an error:
[code]...
View 1 Replies
View Related
Aug 23, 2010
I'm clueless about this format I need to use for starting this threadI am trying to connect to the internet but have no network connections available and it says my wireless is disabled. (Ubuntu Studio 10.04)How do I turn it on?
1 ) Machine Brand and Model (PC/Laptop):
Code:
HP Pavilion, a6600f
[code]....
View 9 Replies
View Related
Sep 24, 2009
I need to know how to configure the address of the next level DNS server in my BIND server. im in a FEDORA 10 system.
View 3 Replies
View Related
Jul 8, 2011
what is bind vs bind-chroot vs caching-nameserver ?what is the different between eatch others ?
View 7 Replies
View Related
Nov 30, 2009
I am new in configuring named.I want to set my firewall (Fedora 11) as a name server. The local domain is a Windows domain. I'd like internal users translate domain name into IP on this server when they go to the internet. After reading some posts on the web, I set up named as below. It seems the named does the job but with some problems.
1) When I start the server, I couldn't find the named process even if the file "named" is in /etc/init.d. I can browse Internet on the server with domain name (DNS works locally). But internal users couldn't get the domain name translated. If I shutdown the server at this stage, it will shutdown within 1 minute.
2) If I run "service named start" after the server boot up, I see process "named" and named work okay. Both internal user and local host can browse Internet with domain name. However, any command starting with "service named" has no response after this, such as "service named status" or "service named stop". I can see it shows "stopping named" and this last forever. I have to kill the process then restart named server so that named may run again.
3) If I shutdown the server now, it will take 4-5 minute instead of 1 minute in 1). The shutdown stuck at "shutdown named" for 4 minutes. Even if I kill process named before the shutdown, it will take 4-5 minutes.
It took me a week on this issue. I appreciate if you could take a look my configure files and guide me through this.
View 14 Replies
View Related
May 27, 2011
I'm trying to setup a DNS name server using fedora14. Everything is working in the LAN, I've no errors in log/messages, but cannot ping outside world. Can ping IP addresses but not domain names.
View 4 Replies
View Related
Oct 28, 2009
i've made a big update of almost 300Mb.I'had a working DNS server.Now, when i boot the box, named works and it resolves all the clients.If i make any change (enter a new client for example) and of course i restart named (service named restart), named stop but does not start again !!!In order to get a working named, i 'm obliged to reboot the box?
View 6 Replies
View Related
