When I'm booting (FC10) the get the message that my lan cable my be unplugged for my Ethernet connection. Since I'm using my wireless card to connect to the internet, I don't want to see the message every time I boot. So my question is how do I did able or stop the message that I'm seeing from showing during boot.
View 2 RepliesI'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies View RelatedI have installed both Windows Xp and Fedora 12. Last time when i was working on Fedora it didn't shut down properly. Now following error occurs and finally the system sleeps.
ata1.00 : exception Emask 0x0 Sact 0x0 SErr 0x0 action 0x0
ata1.00 : BMDMA stat 0x25
ata1.00 : cmd c8/00:00:50:5a:34/00:00:00:00:00/e4 tag 0 dma 131072 1n
res 51/40:7f:d1:5a:34//00:00:00:00:00/e4 Emask 0x9 (media error)
ata1.00 : status : { DRDY ERR }
ata1.00 : err : { UNC }
end_request: I/O error, dev sda, sector 70539985 JBD : Failed to read block at offset 5884 EXT4-fs(sda): error loading journal mount: wrong fs type, bad option, bad superblock on /dev/sda8, codepage or helper program, or other error In some case useful info is found in syslog-ty dmesg | tail or so
I have Fedora12 with dual boot WinXP on my laptop. Everything was working fine but suddenly one day I booted up my system and selected Fedora from boot menu , an error screen came - "[...]ERROR: tried to remove a fb that we didn't own Boot has failed, sleeping forever"
I don't know why It's happening ? The last thing I did on Fedora was to install some packages to start Wi fi and It was working fine from last 2 months, then why suddenly this bug ?
I googled about it but most of the cases are of Live CDs or USBs but in my case I had a whole different space assigned in my hdd for Fedora and everything was supercool.
Does it mean I have to do a fresh install of fedora12 again ?
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
I have 2 CPUs Which are Intel and AMD based. I used F9 before and didnt have any issues while I removed the hdd that I'd installed F9 on INTEL based and then put my hdd on my AMD based cpu. Well it booted and ran perfectly no issues came up.And then I've done the upgrade to F10 (clean install on INTEL). I do the same case above.But I got error msgs it said that the UUID cannot be found (I was using label on F9 fstab and worked fine).
I put back my hdd to intel based cpu and then try to edit my fstab and menu.lst (change UUID to LABEL). WOW I thought by changing UUID from fstab and menu.lst would resolve my problem but it doesnt solve anything. My devices (sda1/2/3, /boot, and /home) cannot be reconized.Well do you guys know how to change UUID to LABEL? and what exactly my problem?
I'm relatively new to Linux, and have broken many more things than I have fixed.. I guess that's the learning process eh? So here's my problem: I've been experimenting with the mount command, and have mounted my local file system (sda1) to a directory (/mnt/test). I was attempting to mount an external hard drive, and sda1 clearly was not the correct drive (I did eventually discover where the external was located, however sda1 remains tied to that directory). I rebooted my system, and now the Grub command prompt loads. When I type "boot" I'm presented with "Error 8: Kernel must be loaded before booting". I'm assuming this is because I mounted my local file system, but I could be wrong. Does anyone have any ideas how I could remedy this?
View 5 Replies View RelatedI Installed Fedora 14 about 2 weeks ago and was just settling into using it more or les permanantly and had to turn of the power to do some maintenanace. When I rebooted I got the grub> prompt. As I have already shut down and rebooted several times over the last couple of weeks, I could not se why this happened, so I rebooted and stiull got the same problem. Things I have tried:
[code]...
I am currently using a 64 bit ASUS P75P55-M motherboard.
I am having trouble getting FEdora 15 running on my MacBook Pro. I had Fedora 15 installed before on this MBP before, so I know it works. I basically followed the good old instructions of
1. Create a Windows partition in bootcamp (rEFIt was already installed from trying to get ubuntu running)
2. Boot from disk and install in Windows partition with bootloader on installed on the / partition
3. Install, reboot, and resync the MBR using rEFIt partitioning tool
4. Shut down the computer and start up on the parition you installed linux on
Now I get a grub error code...
I'm trying to boot my Fedora 12 partition, but am failing miserably, when I try to boot Fedora 12 I get "ERROR: NOT AN ASSIGNMENT"
my 40_custom file is as follows:
Code:
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
[code]....
Note that I tried this using the entry that is currently commented out and I had the same result. Does anyone know what is wrong? The entry that is currently uncommented came directly from the grub entry created by fedora itself (before I installed ubuntu).
I am using Fedora core 10. I have changed my partition size of Linux from windows. After I finished resizing the partition, I rebooted my system to the Linux platform. While booting it gave me an
error: repair filesytem #1:
I don't know what to do?
I just read through the Lifehacker article on how to create a Linux boot from USB and thought it would be a good idea for when I want to use a light system on my netbook. Anyways, I encountered some problems when trying to boot the first time on my netbook. I got an error before it was loading up "Error: idle with IF=0" but everything ended up booting normal; however, I couldn't find my wireless connection.
Well, then I decided to boot up my other laptop with it and then was going to install the OS to my external hard drive; however, it never did find any storage devices (after I let it sit and load for about 10 minutes).My last question/issue is wondering if I can install it to my main hard drive and boot either WIndows XP/7 or Fedora instead of just one or the other. FYI, I was running the boot from a 4gb USB drive.
FC11/KDE-live Cd
The error is below;
apic is getting timing mode sailed. IO apic resources couldn't be allocated
I fed the kernel commands, noapic , noioapic but that didn't work .
When I attempt to boot from the new Fedora 10 Live CD, it comes up with the initial screen, then gives me an error message saying something like, "Error with intranfs/init," and then it drops to bash, which I do not know how to use. I have P4 HT @3 GHZ., 2GB of RAM, a 400GB primary HD split between Windows XP and Mythbuntu 8.10 (dual boot), a 200 MB secondary HD (the primary is SATA, the other IDE), etc. I wanted to try the Live CD before deciding whether to change over to Fedora. I burned the ISO image of the Live CD to a CD-RW myself.
View 1 Replies View RelatedI use fedora 15 and everything was ok , Now on booting network manager fail and dosn't appear .Iuse gnome 3
View 4 Replies View RelatedI am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode
View 4 Replies View RelatedThe symptom is that NetworkManager repeatedly ask for password to connect to my AP.My AP is secured with WPA-PKI. The problem even happens with Fedora 11 live cd if I'm not quickly configure wireless connection using NetworkManager right after Fedora completes booting up. It means if I promptly configure wireless connection, i'm still able to access Internet. Same thing happens for the first boot of Fedora from hdd. For the second boot or when I dont quickly configure wireless connection when system finished booting up, NetworkManger repeatedly asks for password for AP.
I did try several approaches posted in this forum but problem still persisted. Some of approaches I tried are:
[Code]....
I have Fedora 12 (Fedora-12-i686-Live.iso) installed and booting in a VMWare workstation (version 6.5.3). I am able to login as the LiveUser.
I need information on how to access the drives on my host which is WindowsXP. My C: on the host is shared, and my network adapter for the VM is "NAT".
The only directory listed in my /mnt directory is "live".
My Fedora enviornment is "bare bones". There is nothing installed except for the original files from the "iso" loading procedure.
I also have been unable to get the VMWare tools installed, and I don't know if this is related. I don't mind bypassing this if this isn't required. My only desire right now is to access my C:
is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...
I just installed fedora 10 using the GUI install, and when I try to boot, it gets me to the grub command line
grub>
when i enter 'boot', it gives me grub error 8: kernel must be loaded before booting. Not sure how to fix this.
Also, I used to have fedora 9, and i had an option to boot fedora or 'other', which is windows. How do I go about setting up something similar in this case?
EDIT:
Also, when I type root, it tells me that the partition (hd2,0) (i assume the one i installed FC10: 3rd hdd, first partition) is an unspecified file system ...
I think something happened to grub when it removed my old partition with FC9...
whenever i am booting my laptop and selecting ubuntu 10.10 i get init ureadhead main process (26 terminated with status 5 and then a violet screen occurs which never dissapears
View 1 Replies View Relatedi have mistakenly deleted a partition to create space after uninstalling Ubuntu. now my computer says
GRUB loading.
error: no such partition
grub rescue>
i am a newbie and have no idea how to get to win 7
after loading kernel we get /pci@f0000000/mac-io@17/ata-4@1f000/disk@0:3,/boot/vmlinux : input/output
Every install does this.
What is it with PPC ubuntu lately? Starting with 9.04 it has been nothing but snake bit. And is there any other mirrors beside britain for PPC it seem frequently unavailble or slow.
my system crashed and so i tried booting from a live usb pen drive. but i get the following error messages (see picture). does this mean that my hard drive is curruped? what can i do? i alreadys tried booting from different live medias, but i cant get anything to run (gparted and system recovery live).
View 1 Replies View Relatedbefore login form appears while booting slackware, my pc gets into this error loop: mysqld_safe error. And there is no way to stop it. My cdrom is broken so I cant run slakcware 13.1 dvd to see if I could do smth. How can I repair this.
View 2 Replies View Relatedi downloaded Vmware Workstation 7 onto my Windows XP PC and i have tested the os on a HP laptop so the OS is fine, well back to the point i load it up and VMware has a error saying it can not find "C:/Documents/allusers/applicationdata/" something like that ill add a picture so you will see.
i installed an rebooted and i still get this problem.
Running 11.3 64 bit updated to kde 4.5.4I noticed when booting yesterday the following error message is shown:-
[ 17.688956] end_request: I/O error, dev sr1, sector 4294180608
[ 17.696944] end_request: I/O error, dev sr1, sector 4294180608
[ 17.702846] end_request: I/O error, dev sr1, sector 4294180784
[code]....
I successfully installed windows 7 and ubuntu 9.10 and both working great together, after a while and installing some programs in ubuntu like pysdm and ntfs-3g. I even logged out and in several time successfully. But when I shut down the pc and open it again, the following two errors show up:
init failed to spawn mountall-shell post-stop process:unable to execute permission denied.
init:job-process.c 529: unhandled error from job-process-spawn permission denied.
My windows 7 still working but what about ubuntu. My volumes are Ext4.
when i changed the partion size on my new hdd when i booted up the computer it said grub 17 error and wouldn't load ubuntu
View 1 Replies View Relatedi have laptop Toshiba Satellite A500 with Intel i5 processor and Intel Graphics Media Accelerator HD , i am having this problem when booting from any live CD or USB when i choose "run from USB or Live CD " or even "install Ubuntu..." i got large list of error lines (as i think) and after that , no response until i manually switch laptop off. attached two photos and a small video that i could took as it is very quick .
View 5 Replies View Related