Fedora :: "kernel Must Be Loaded Before Booting" Error
Jan 23, 2009
I just installed fedora 10 using the GUI install, and when I try to boot, it gets me to the grub command line
grub>
when i enter 'boot', it gives me grub error 8: kernel must be loaded before booting. Not sure how to fix this.
Also, I used to have fedora 9, and i had an option to boot fedora or 'other', which is windows. How do I go about setting up something similar in this case?
EDIT:
Also, when I type root, it tells me that the partition (hd2,0) (i assume the one i installed FC10: 3rd hdd, first partition) is an unspecified file system ...
I think something happened to grub when it removed my old partition with FC9...
View 3 Replies
ADVERTISEMENT
Nov 16, 2010
I'm relatively new to Linux, and have broken many more things than I have fixed.. I guess that's the learning process eh? So here's my problem: I've been experimenting with the mount command, and have mounted my local file system (sda1) to a directory (/mnt/test). I was attempting to mount an external hard drive, and sda1 clearly was not the correct drive (I did eventually discover where the external was located, however sda1 remains tied to that directory). I rebooted my system, and now the Grub command prompt loads. When I type "boot" I'm presented with "Error 8: Kernel must be loaded before booting". I'm assuming this is because I mounted my local file system, but I could be wrong. Does anyone have any ideas how I could remedy this?
View 5 Replies
View Related
Mar 27, 2011
I Installed Fedora 14 about 2 weeks ago and was just settling into using it more or les permanantly and had to turn of the power to do some maintenanace. When I rebooted I got the grub> prompt. As I have already shut down and rebooted several times over the last couple of weeks, I could not se why this happened, so I rebooted and stiull got the same problem. Things I have tried:
[code]...
I am currently using a 64 bit ASUS P75P55-M motherboard.
View 1 Replies
View Related
Mar 20, 2010
I got an acer aspire 5532 last year for Christmas and I want to try the new 10.04 ubuntu on a partition with windows 7. I installed it successfully on drive E and when I boot up I get a black screen like this:typed boot and got: "error: no loaded kernel."How do I fix this?
View 1 Replies
View Related
Mar 17, 2010
I have Ubuntu installed in my machine, I also have Windows Vista.I have been using Ubuntu perfectly well, today I received the following message when chose to boot Ubuntu:GNU GRUB version 1.97 beta 4[Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device/flies completions]
View 6 Replies
View Related
Apr 26, 2010
I've been looking forward to making the switch to Ubuntu for a while, but ever since I did, the road's been pockmarked with errors and hassles. That's, primarily, because I don't know what the hell I'm doing. Let me explain how I installed Ubuntu: All I did to install Ubuntu was download the file from the website and run the program. I didn't burn anything onto a CD or USB; I just clicked on the .exe file and let it run from there. Everything worked great - all I had to do was boot my laptop and choose from either Windows 7 or Ubuntu. Now, I had no idea how to watch videos, so I started to install a lot of stuff from the Synaptic Download Manager. Now, I don't know all of what I downloaded, but it was mainly games. The next thing I know, I get this page when I choose Ubuntu:
Code:
GNU GRUB version 1.97~beta4
[minimal BASH-like line editing is supported. For the first word, TAB lists possible command completion. Anywhere else TAB lists possible device/file completions.]
sh:grub> _
So I hit TAB and try the easiest command on the list, BOOT. This is what I get when I try boot:
Code:
error: no loaded kernel
So I don't know what I did wrong.
View 4 Replies
View Related
Apr 5, 2011
I am trying to install Debian lenny and ext2 filesystem with GRUB as bootloader in my USB memory stick to boot linux . However , when i try it out on my PC , a grub error : No loaded kernel is shown. I have checked that the kernel image is located in /boot.
View 14 Replies
View Related
May 21, 2011
I was about to do upgrade from 11.3 to 11.4.I was following the guide I found in opensuse's website. I was to the point where I had to disable all 11.3 repositories and add the 11.4 at that point I forgot to change my nvidia repository ( I have a g210m graphic card).
thus after the upgrade the X could not start at all. I think this was because Yast could not find the nvidia driver.
Using text mode YaSt2 I added the nvidia driver but after restart I can not see and X running. I receive an error message that the current kernel can not be loaded!!!
I also checked in command line if there is something like Sax2.. but I couldnot find anything.
View 6 Replies
View Related
Dec 9, 2010
when i boot my system it gives an error ext3.0 and jbd.0 not installed/loaded
View 1 Replies
View Related
Nov 18, 2010
I used to have FC11 installed with the nvidia supplied binary driver. Worked fine, very stable. Trying FC12 and FC13 live CDs caused a hang, so I stuck with FC11. FC14 live CD did boot so I backed up my own files and did a clean FC14 install. Upgraded to get kernel 2.6.35.6-48, installed the nvidia driver from RPMFusion (260.19.21) and had a working system! Now, after a cold boot, the kernel always hangs during boot. Tried a number of kernel boot option (apci=off, noapic and a few others too). The hang is not always at the same place. The earliest it has hung is after:Disabling lock debugging due to kernel taint
Sometimes its a few lines later at:NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.12 ...(which would seem to imply that the hang can even occur a step or two before the actual driver is loaded!)
Sometimes it keeps going for a few more seconds and randomly hangs during some other driver load.
Without a specific nvidia driver the system always boots ok, so I'm pretty sure its the nvidia driver but I just can't seem to get a handle on this in a reproducible way. Sometimes, when I have make some other change, it will boot and work ok, but a reboot locks it up again (for example, in case it was SELinux, I disabled it and on the next reboot it booted and worked ok. Then, next boot, it wasn't working again). When I make changes, I reboot using the previous kernel, make the changes and reboot, with an occasional success. Once I start rebooting using the latest kernel, it always hangs.
I'd love to get a solution to this, but even some advice on debugging this would be appreciated!
I'm using 8600GT, 256Mb, PCIe card in a MA69VM motherboard with 3Gb of RAM.
View 2 Replies
View Related
Aug 7, 2010
These days, I tried to compile my own kernel. Now, it seems work. However, when the kernel is booting, I always get the error message like below:
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
It looks that something is wrong with my acpi subsystem's configuration. But no matter How I reconfig it, this message still occurs.
My distribution is UBUNTU 10.04 LTS
original kernel with the distribution is 2.6.32
My own kernel is 2.6.35
View 7 Replies
View Related
Sep 7, 2010
After a reboot, my PC just hang. It says "insmod : error inserting '/lib/raid456.ko : -1 File exists ..." then followed by a kernel panic. I have tried to boot using rescue mode but it couldn't find any Linux partition, thus no /mnt/sysimage was mounted. It left me at a shell and I'm stuck there.
View 3 Replies
View Related
Sep 21, 2010
im running suse 11.3_x64 clean install along side with Win7 Pro _x64 had a big fight installing Vbox 3.2.8 PUEL edition but i need to test some VMWare products like 'VMWare vShpere (ESXi 4..0.1 - which i couldn't install in a vm in Vbox) ' before putting it in production enviroment in some of my clients. version: VMware-Workstation-Full-7.0.0-203739.x86_64 The installation of vmware was quite simple with no errors. the problem kicks in after the first reboot when i try to run it. before installing vmware i installed the following:
[Code]..
When i try to run vmware workstation the 1st error kicks in: Before you can run vmware, several modules must be compiled and loaded into the running kernel:
[Code]...
View 9 Replies
View Related
Sep 13, 2010
I've been playing around with trying to assemble a bare-bones Linux system on a disk.img file through a loop device. I compiled the most recent stable kernel and then copied it onto the root partition in the image. When I try to boot up into the image using qemu, grub gives me this:
Code:
Booting 'tiny'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinux
Error 13: Invalid or unsupported executable format
Press any key to continue... I am confused because I compiled the kernel with 'make bzImage', and the architecture hasn't changed (qemu on the same machine used to build the kernel). So it should be bzImage format. Is that what this Error 13 means, or could it means something else is wrong...?
View 1 Replies
View Related
May 29, 2011
I'm trying to get Ubuntu 10.04 running on a PCM-9343 board from Advantech. To do so I followed the instructions in this file from DM&P [URL] I installed a text-only Ubuntu using the alternate installer on a CF card that was connected to my PC. After reboot I downloaded the given kernel and updated the installation on the card, as said in the instructions. Inserting the card into the PCM-9343 gives a working Ubuntu Installation. So far so good.
The only thing not working is networking. The ethernet adapter is not loaded on boot, neither can I up it after logging in using "ifup -a". I found out, that the driver was not loaded during booting, i.e. the module r6040 didn't show up on "lsmod". The module is included in the modified kernel, that I downloaded from the producer's page. So I added it to /etc/modules and rebooted. Now it's loaded, but still no eth0. Ifup -a gives the following messages:
[Code]...
View 7 Replies
View Related
Apr 4, 2011
The graphics card on a openSUSE11.4-32-bit system is a ATI RV530LE [Radeon X1650 PRO] It looks as though xorg sets it up with the RV535 or RV560 chipset if the radeonhd driver is selected Is there a way to ensure the RV530 chipset version is loaded when booting.
View 9 Replies
View Related
Nov 18, 2010
i am looked htop load CPU and it showed to me that kernel loaded CPU on 100%.
View 9 Replies
View Related
Apr 26, 2010
I had fedora-11 installed and the kernel version was 2.6.29 I downloaded new kernel version 2.6.33.2 and did following,
make mrproper
make
make modules_install
make install
when I rebooted and selected 2.6.33.2 from grub entry, fedora logo came and spalshed, after that monitor started blinking and now its not going anywhere, i can see blank screen and nothing else. If I do ctrl+alt+del it shuts down the system normally.
I tried interactive mode also system did fine untill this point "registering binary handler for windows application" after that the same problem came, monitor started blinking and screen is blank., Any pointer regarding this will be helpful , what exactly went wrong? I can provide more info if u need it.
View 2 Replies
View Related
Nov 28, 2010
I recently updated the kernel from SLES 11 to SLES 11 SP1 .However my kernel modules are not getting loaded and they throw an error such as shown below:"Errornserting mii : Unknown symbol in module, or unknown parameter (see dmesg)"
View 8 Replies
View Related
Feb 15, 2011
i have installed kernel 2.6.29.1 on fedora14. when i tried to boot the kernel 2.6.29.1 it does some USB identification,and then it got hanged and displays nothing... logs are [1.955941]usb3-1: configuration #1 chosen from 1 choice [2.054770]input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1
View 4 Replies
View Related
Feb 8, 2011
when i poote the code you give me the grub>say error 8:kernel must be loaded beforebooting.what ihave to do now?
View 2 Replies
View Related
Sep 9, 2010
I installed VirtualBox-OSE and VirtualBox-Kernel from the Slackbuilds at slackbuilds.org.When I start VirtualBox I get the following message on the CLI: Code: WARNING: The vboxdrv kernel module is not loaded.Either there is no module available for the current kernel (2.6.33.4-smp) or it failed to load.Please recompile the kernel module and install it by sudo /etc/init.d/vboxdrv setup.You will not be able to start VMs until this problem is fixed.I gave /etc/rc.d/rc.vboxdrv executable permissions, and then ran.The only issue is, I have to do this each time that I reboot, should I add 'modprobe vboxdrv' to one of the startup scripts or is something else wrong?
View 7 Replies
View Related
Apr 17, 2011
after some yum update on my CentOS 5.6 server I noticed this error when the server is booting:
"dm multipath kernel driver not loaded"
View 10 Replies
View Related
Sep 30, 2010
I upgraded my F13 kernel from 2.6.33 to 2.6.34. But, the newer kernel isn't booting. It starts the booting process and then goes idle. how shall I troubleshoot?
View 2 Replies
View Related
Apr 13, 2011
I just installed 2.6.35.12-88.fc14.x86_64 via Software Update and rebooted. When selecting new kernel to boot from, the boot sequence doesn't finish. I am not sure how t o troubleshoot; I am prompted for the PassWord for encrypted /home, but after that, it freezes.
View 8 Replies
View Related
Jan 7, 2010
I am trying to get my VM to work. It tells me the virtual box Kernal driver is not loaded, how do I get started on getting this to work.
View 1 Replies
View Related
Dec 22, 2010
im doing a school assignement and i cant find any info about this anywhere. How do i make sure that a module is loaded into the kernel upon boot?
View 2 Replies
View Related
May 24, 2010
I have a zyxel dsl (usb) moden, which needs a firmware portion to work, called cxacru-fw.bin.
I have been using this modem using with at least two different slackware distributions, even when the atm drivers were not included in the kernel.
Presently I am using slackware 13.0, with the vmlinuz-huge-smp-2.6.29.6-smp kernel.
I downlowded the 2.6.34 kernel, because I need it for a new webcam, compiled and installed it, and oops! the modem does not work anymore.
I am pretty sure I have configured the kernel correctly; dmesg tells me the modem is recognized by the kernel, as it is with the previous one, but the firmware is not loaded, because the DSL led remains off.
I attach the kernel configuration lines:
I have tried forcing the kernel to load the firmware, using but it didn't work either.
View 1 Replies
View Related
Feb 20, 2010
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies
View Related
Jul 19, 2011
In an attempt to ameliorate some other problems (lm_sensors, and loopback), and based on several forum entries, I decided to update the default f15 kernel (2.6.38.35) using kernel-2.6.39-1.fc16.x86_64.rpm from rawhide. It seemed to install without problems and when I rebooted it seemed to hang just before completing the boot process. The on screen boot messages ended with:
Started Display Manager
Started LSB: daemon for libvirt ........
Starting LSB: suspend/resume libvirt guests on shutdown/boot
[ 12 ......
about a dozen similar lines ending with
[25.030991 hci_cmd_timer: hci0 command tx timeout
then it apparently hangs
However, at that point I can log into to a console using Cntl-Alt-f2, so most, if not all, the crucial boot processes seem to have completed. There is an issue with the nVidia driver that I will deal with by modifying /boot/grub/grub.conf to re-enable nouveau, but I am stumped by what is causing the hang up. There is a certain amount of traffic regarding a similar problem with Ubuntu 11.04, but no solution other than it seems to be related to a BIOS bug (NFI)
what sub-system uses the "hci_cmd_timer" and why it might interfere with the boot process? Has anyone else run into a similar problem with f15?
Is there a better way to get an updated kernel in f15? I do want to keep all the Red Hat patches and back ports, so reluctant to build a kernel from scratch from upstream sources at kernel.org (and maybe just a bit apprehensive ;-})
View 11 Replies
View Related
