Fedora Networking :: 12 Booting In VMWare WS But Cannot Mount/access Windows Host
Apr 1, 2010
I have Fedora 12 (Fedora-12-i686-Live.iso) installed and booting in a VMWare workstation (version 6.5.3). I am able to login as the LiveUser.
I need information on how to access the drives on my host which is WindowsXP. My C: on the host is shared, and my network adapter for the VM is "NAT".
The only directory listed in my /mnt directory is "live".
My Fedora enviornment is "bare bones". There is nothing installed except for the original files from the "iso" loading procedure.
I also have been unable to get the VMWare tools installed, and I don't know if this is related. I don't mind bypassing this if this isn't required. My only desire right now is to access my C:
View 6 Replies
ADVERTISEMENT
Aug 16, 2011
I am running a Ubuntu Linux VM using VMware Player on a Windows 7 host.
I don't want to connect directly to the network or use NAT; I need host-only networking but also need Internet access. How can I do this?
View 2 Replies
View Related
Oct 31, 2009
I have a WindowsXP virtual machine which I need to isolate from the host machine completely (have the host act as a bridge but not be visible on the IP layer at all.) It still needs to have Internet access. Obviously it has to be able to contact the router but I would like to be able to block port 80 (or even just block all SYN packets addressed to the router.) I also want to allow port forwarding from the router to the virtual machine. I can use basic iptables but this is way beyond me.
The host OS is probably going to be Debian Lenny but this is not built yet so if someone can recommend a different distro which is as lightweight as possible but will support VMWare, iptables and tcpdump then that would be great. I was thinking of Slackware but I have not used it in ages and from what I can remember their is no real package management.
View 1 Replies
View Related
Oct 3, 2010
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
View 12 Replies
View Related
Oct 10, 2010
I just purchased vmware workstation 7 and I am trying to decide what the best host is. I will be running both windows, Linux, etc. I was hoping to go with the most stable and lean is and that is pointing towards ubuntu.
Does anyone have any experience with either or? any suggestions would be great and my linux skills are entry level but I always like to learn so I'm ready for the challenge.
View 2 Replies
View Related
Dec 8, 2010
I installed Fedora on a VMWare, hosting OS is Windows 7
How can I access Disks and NTFS Partitions on the Host OS "Windows 7"
From Fedora?
View 1 Replies
View Related
Feb 9, 2010
I just had one hell of an experience trying to get openSUSE 11.2 to run on VMware server 2.0 on a Windows XP host. I am posting some instructions on how I finally got things working.
1) Download the openSuse iso image (and add-on CD if needed)
2) Download and install the VMWare server
3) Before you try to start the server console, you will need to configure the web access to allow you to log on. go to press Start->Programs->VMware->VMWare web access->Configure Tomcat
4) on the logon tab check logon as: option
5) add your account there and set the password
6) Now in your web browser (I use firefox) access the console via: [url] [url]
7) Before you start to create a virtual machine, you will want to set up the server to have access to your iso's. The server will only allow VM's access to specific directories through "datastores". You can either move the iso images to what has been specified as the default datastore... or create another datastore that points to the where you have the iso's.
8) Now we can create our virtual machine. This is simple, just press the button and follow the prompts.
a) at some point it will ask about an CD-Rom, you will want to use your suse DVD iso image. Select the option and then navigate the datastore that contains the image. Once found click and continue.
b) Network interface has 3 choices:
Bridged - the virtual machine will appear on the network as any other computer. Allows the VM to host server applications. User needs to have control over the network to ensure DHCP requests are handled (or static IP is assigned).
NAT - VMWare server will manage a virtual router, the VM is then connected to this router. On this router, the hosts internet is used as the WAN. Users do not have to have control of the network, but will have to setup port forwarding in VMWare to host server applications
Host Only - This means that the virtual machine can only talk to the host. The only way to get networking is to have a proxy through the host machine. This is setup on the host independent of VMWare. Users do not need control of the network, but control over the host. I doubt you could host server applications though.
9) With the VM created we can start it up. We can open a window to it through the console tab of the VMWare server console. When I first started it, it was stuck looking for an OS once the console finally rendered the graphics. A reset, an F2 at the post and selecting the appropriate boot media for boot got the installation started.
10) Install Suse as you would any other suse installation. I added a separate partition for swap, but kept the rest on one big one. Others may still want to maintain the separation of home and root
11) ---- Important Error/Solution ----
Once the installation has completed many will notice that the mouse or keyboard does not work! This was the source of my biggest head-ache. Some may think it was a problem with VMWare tools... I tried that to fix that and found the tools were working properly.
View 7 Replies
View Related
Dec 29, 2009
I am new to linux, it was nice to work with linux on virtual machine, but suddenly yesterday when I try to connect using putty from my windowsxp machine its showing network connection error. I dont know what happened. In linux machine ifconfig shows only 127.0.0.1, could not trace problem, guide me to trace the problem.
Previously it used to give 192.168.1.2/192.168.1.3 it used to vary every boot. FTP also stopped working. I am clueless. My system setup:
Del inspiron 1525:
RAM 3G
HDD 160G
Linux RHEL3 on VMWare
View 5 Replies
View Related
Oct 28, 2010
host is windows 2003 server 64-bit
guest is ubuntu 9.04 server 64bit
Qemu : 0.11.1
Qemu manager: 7.0
from Qemu manager, if network card is using User Networking, it's a NAT and I can see that Guest Ubuntu has an ip address 10.0.2.15 and is able to access the internet. However, as Guest ubuntu is running server so I want to do use Tap networking and I assue with Tap, the Guest ubuntu will get an ip address which is in the same subnet as host machine by dhcp. so from Qemu Manager 7.0, I changed Network card to be:
NE2000PCI
Vlan Number =0
VLAN Type: Tap Networking
Mac address: tap0's mac address from host
TAP Network Adpator: Tap0
Note that tap0 was created by openvpn. and then fired Ubuntu guest, ifconfig shows no ip address on eth0 (which has the same mac address as Tap0) so the guest Ubuntu has no ip address and can't access public.
View 1 Replies
View Related
Apr 12, 2010
I have RHEL 5 installed on VMware 6.0 and the host OS is Windows 7. My Host is connected to internet using a wireless connection and works on shared IP. Earlier when I had Windows vista as host I have managed to get the internet connection on the RHEL but do not remember how I managed it. Now I need help in setting the internet connection on RHEL. I have set up a NAT connection. But of no use.
View 4 Replies
View Related
Sep 3, 2010
I am trying to share directories between two F12 machines on a local network with a router box doing DHCP because not all machines on all the time. Web access is fine and local ping and ssh works but telnet doesn't. I have never succeeded doing mounts. So I have been searching for things to fix the above and have just tried rpcinfo. If I do this :
rpcinfo -p 192.168.2.2 it gives rpcinfo: can't contact portmapper: RPC: Remote system error - No route to host. Does that suggest that actually there is an installation problem? So I tried "yum provides portmapper" and that gives "No Matches found".
View 14 Replies
View Related
Jun 22, 2011
I am trying to access a DVD mounted on a machine running Fedora12 (192.168.0.105). I thought this should be possible with NFS, but the above error message is what I keep getting, no matter what I try.
Here is my mount command:
Code:
mount 192.168.0.105:/mnt/dvd -t nfs /tmp/scaleo
The Fedora 12 machine has the NFS server running, and the corresponding entry in /etc/exports is
Code:
/mnt/dvd *(ro)
I thought this might be a firewall problem, but it persists even if I turn firewalls off on both machines (client as well as server.) Also, doing
Code:
ssh 192.168.0.105
is OK, so what is wrong with the route?
I am trying to access a DVD mounted on a machine running Fedora12 (192.168.0.105). I thought this should be possible with NFS, but the above error message is what I keep getting, no matter what I try. Here is my mount command:
Code:
mount 192.168.0.105:/mnt/dvd -t nfs /tmp/scaleo
I now tried
Code:
mount 192.168.0.105:/mnt/dvd -t nfs4 /tmp/scaleo
and it seems the mount succeeded. So, instead of nfs, one must write nfs4?
View 9 Replies
View Related
Sep 9, 2010
My boss is asking me if there is any way to run a full version of Ubuntu from a flash drive without installing virtualbox/vmware on a windows host. I've been searching pendrivelinux.com and really haven't found anything. Can someone point me in the right direction?
View 6 Replies
View Related
Sep 14, 2010
I have VMWare on a notebook, guest Windows running on Linux host. The network in that virtual machine is configured as NAT. I want to share/transfer files from Linux (host) to Windows (guest). So I leave sshd always running on the notebook, I go into Windows and run an SSH/SFTP program. My Wifi router has address 192.168.1.1, my desktop has address 192.168.1.2 and my notebook has address 192.168.1.3. On the notebook, that SSH/SFTP program connects to 192.168.1.3 (i.e. the notebook itself) and everything works fine. But it's a notebook, and when I leave home with it, 192.168.1.3 is no longer accessible. How can I let the guest OS connect to the host OS when I'm away from my Wifi network?
View 1 Replies
View Related
Apr 4, 2010
My special networking configuration.
The case: I'm running two dedicated Linux servers (openSUSE). Both servers are connected through public IP addresses to the internet. Each server hosts a VMware with another Linux inside.
SRV1 and SRV2 are the entry points for OpenVPN from external clients. SRV1 and SRV2 are although connected through an OpenVPN connection for save data sharing.
My problems:
SRV3 can't connect to SRV2 and SRV4.
SRV4 can't connect to SRV1 and SRV3.
External OpenVPN clients connected to SRV1 can't reach SRV2 and SRV4.
External OpenVPN clients connected to SRV2 can't reach SRV1 and SRV3.
Here are my configurations:
Code:
Code:
Code:
Code:
View 1 Replies
View Related
Jul 28, 2009
I am running VMware workstation on a Linux host and WinXP guest using NAT. I have shared a folder on WinXP, and I am able to mount it on the linux host with:
mount -t smbfs -o username=Administrator,password=mypasswd //192.168.100.129/Shared /mnt/tmp
This works fine. However, I want to mount the same folder from a different linux machine (not the host).
I added port forwarding in /etc/vmware/vmnet8/nat/nat.conf:
[incomingtcp]
#445 = 192.168.100.129:445
If I run:
mount -t smbfs -o username=Administrator,password=mypasswd //external_ip_number/Shared /mnt/tmp
I am getting:
mount error 112 = Host is down
Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
It doesn't work even if I try the above command from the linux host itself. It only works if I use the internal IP number. I suspect vmware is not forwarding port 445 but I am not sure how to verify it. I am not running smbd on the linux host, in case that make any difference. I didn't think that was required because the server is really on the WinXP and the linux is just a client.
View 3 Replies
View Related
Oct 5, 2009
I'm running a Fedora 10 box behind a Comcast cable modem that provides squid and mail services to 15 XP and Vista workstations. I upgraded the ethernet cards on our Fedora box to support our new 1 gigabyte network. I kept the same device configuration eth0 and eth2 by updating the /etc/udev/net persistent file and changing the ethernet hardware address in the respective ifcfg-eht files in the /etc/sysconfig/network-scripts. The box booted to the new cards, the route and ifgonfig shows the new cards and their hardware addresses, the configuration looks as how the old cards looked (eth0 and eth2 respectfully). I was able to browse the local network and have access to the internet as before from inside the network . However I cannot get access to our web server that serves our web host and our VPN services from ouside our network. I tried stopping the firewall and still could nor connect from outside the network.Could my old ethernet hardware address be hard coded somewherel?
View 1 Replies
View Related
Jul 14, 2009
Have done a bit of Googling around this but got totally swamped so will try here. Basically we are running a CentOS server which hosts a number of virtual hosts under Apache. Recently I needed to set up a development environment for another site using Ubuntu and have this running and accessible on the LAN from a VMWare image. I'm using bridged networking so the VMWare machine has its own IP on the LAN subnet.
I've set up a DNS to point to the external IP of the physical host but can't figure out how to route traffic requested on this domain to the VMWare host. I've basically tried two approaches (configuring a proxy web server and reverse proxy in an httpd.conf file and mucking around with iptables forwarding rules but without success.
Ideally I'd like somesite.somewhere.com to point to the VMWare IP but I could live with a custom port on the end if thats whats required.
To throw further complication into the mix I need reliable communication between the VMWare machine and external mail relay servers in order to debug any issues with mail bouncebacks, embargos etc.
Any idea what's the easiest way to accomplish this?
View 4 Replies
View Related
Sep 5, 2010
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies
View Related
Jan 28, 2010
I have annoying problem. My setup is the following: debian Linux, 64 bits, VMWare workstation 7 host, with Windows XP running as guest. From Firefox, or Internet Explorer, I am unable to access few sites, for example nvidia.com, osdir. Basically get connection timed out, on the other hand ping works to those sites. Moreover, Slashdot loads very very slow and sometimes gets horrible text-only version.
everything works fine on Linux host
I suspect it has something to do with routing on Linux, I recall having similar problem long time ago, which was fixed by setting something in /proc.
I tried setting MTU and TCP window size on Windows lower, but did not help
View 2 Replies
View Related
Mar 26, 2011
basically i am able to connect to my other windows machine using rdesktop I want to be able to mount the window machine's partition (particularly my media folder cusermyaccountVideo) i know rdesktop ipaddr -r disk: blah blah blah mounts the partition onto the local machine however, i cant figure out what the specific commands are i tried followings but with no luck
Code:
rdesktop ipaddr -u username -p password -r :c=mntmntpoint
rdesktop ipaddr -u username -p password -r :c=mntmntpoint
rdesktop ipaddr -u username -p password -r :cmyaccountVideo=mntmntpoint
all these commands didnt work do anyone know how to do this? i thikn there must be a way
PS: no luck with smbfs as my machines arent on the same lan network (not sure if samba can connect remotely)
View 7 Replies
View Related
Jan 30, 2011
I'm running Ubuntu 10.04 on a VM and I'm trying to automatically mount two shares from the Windows Vista SP2 host. Currently this is failing with the message "mount error(112): Host is down".
I recently upgraded VMWare Server. Before the upgrade I was able to mount shares without a problem. I can still mount shares on the host using the builtin "Connect to server" feature in Gnome. The problem I'm running into is mounting shares via the command line or via fstab. The relevant lines from my fstab are below.
Just a couple notes: the IP address of the host is static on the virtual network, so using the IP address as the server name should not be an issue. Also, I am able to ping the host fine (which obviously must be true for me to mount using the Gnome feature).
View 2 Replies
View Related
Jan 25, 2010
shall explain my problem step by step! so that you all can understand!
1. Out of 120gb hardisk, i created an 100mb in the first cylinder of the harddisk and installed the "symantec boot magic" for dual boot option after switching on the system.
2. Next 70gb is for windows and installed the same.
3. Rest were for "Linux" !! In which i created on 100mb for "/boot" loader files, then one 1gb for "swap" area and the rest of the memory for "/" mounting point.
4. After all, i installed the "VMWARE" in windows, and while selecting the mount of linux, i selected the respective linux portion, and did the other settings.
5. Once done with this, i powered on the machine in vmware, but it was saying "BTMAGIC" not able to find, install again..
6. Cant we not mount the linux via "vmware" which is installed in windows, as i had used "symantec boot magic" for mounting windows/linux??
View 3 Replies
View Related
Aug 5, 2010
I'm trying to access the VMWare console from firefox using the VMWare plugin. The problem is that it doesn't work on Firefox version 3.6.8. So how can I access the console?
View 2 Replies
View Related
Apr 10, 2010
What could block access from Fedora to just one Windows XP system without blocking access to or from other Windows systems on the network? I have a working Windows network with six computers and one network-attached-storage. Two of the computers (MARTIN and NANCY) are Windows XP, the rest are older. I set up a Fedora laptop with Samba. The Fedora system can access the Internet (I'm using it to post this message). It can see all the Windows systems, and it can open all of them except MARTIN. The firewall on MARTIN is turned off.
I go to Places, Network, and I see nine icons: the Fedora system, seven Windows systems and one for Windows Network. If I double-click on the MARTIN icon I get a message window that says "Unable to mount location" and "Failed to retrieve share list from server". If I double-click on any of the other Windows icons, including NANCY, a new window opens showing the shares on that system. Similar results with smbclient. It shows the shares for all systems except MARTIN. For MARTIN it says "Connection to MARTIN failed (Error NT_STATUS_UNSUCCESSFUL)."
The other Windows computers on the network can open the shares on MARTIN with no problem. The network is partly wired and partly wireless. The wireless network is secured with WEP. The Fedora laptop is (as you might expect) wireless. The Fedora laptop is an emachines E520 and both Windows XP machines are custom-built tower systems. I don't think that information is relevant but I mention it anyway. What should I look for?
View 5 Replies
View Related
Nov 2, 2009
I'm running VMWare Server 2.0 on WindowsXP as host.I have guest O/S Linux Fedora 8. i cannot access USB drives on my VM. USB drive shows up on the VMware console window as part of my devices, like CD/RW drive, etc. But for the usb drive, it is GREYED OUT./proc/partitions never shows a USB device upon connection of the drive. I have tried googling this to death and found no solution that works.
View 1 Replies
View Related
Jul 19, 2009
Just something that struck me while working on our virtual servers today.
I have bonded 3 NICs at the host in Ubuntu Server 8.04 LTS. They are using mode 0 for Round-robin. Point is to increase the speed/performance of all the servers, but mainly the fileserver. The fileserver is a virtual server running Ubuntu Server 8.04 LTS on VMware Server 2.0.
1) I noticed the NIC in the slave OS reported link speed as 1000 and Im unable to change it as the NIC (virtual one) doesnt support it. Does this not really matter, as the NIC doesnt exist, and it will run at higher speeds anyway? Or do I have to remove the bond on the host, bridge all 3 interfaces from the host to the slave OS, and then make a bond in the slave OS?
2) While at it, does mode 0 only increase performance on data being sent from the host or does it also increase the available incoming bandwidth?
View 1 Replies
View Related
Apr 7, 2010
I installed and tested both Windows server 2003 and Red Hat 9.0 with vmware workstation7. After installing 2003 can access internet but Red Hat can't. I want to test squid proxy server, send mail server, webserver etc. So, I would like to know how to setup WMware's network configuration for Red hat can access internet.
Below link is the configuration of VMware network setup both Server 2003 and Red Hat.
Here is Red Hat Configuration:
http://i64.servimg.com/u/f64/11/74/16/17/linux10.jpg
Here is Windows Server 2003 configuration:
[url]
I am using wireless connection to access internet.
View 1 Replies
View Related
Mar 2, 2010
I am unable to mount Windows shares on Fedora 12. From Nautilus, I can navigate to the shares, but when I attempt to open one I get a dialog "Password required for share ... on ..." asking for username (prepopulated with my username), domain (prepopulated with MYGROUP) and password. I have the same username on the Windows box, but when I enter the password and click Connect, the dialog just pops up again. I'm not sure what "domain" is, tried with my Windows workgroup name, no good. If I blank out either username or domain, the Connect button is disabled.
I tried using the mount command:mount -t cifs //192.168.0.2/... /tmp/mnt -o username=adrian,password=...,iocharset=utf8,file_m ode=0777,dir_mode=0777
That did work once, but now gives the useful error message:mount error(5): Input/output error
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
I can run Windows instead on the client machine, and that gives me access to the shares, no problem.
I have libsmbclient-3.4.5-55.fc12.i686, but that was installed a month ago. I don't see any more recent changes to anything relating to the samba client. I've never had to enter a password to access Windows shares. Actually, it looks like the problem may be on the Windows side, although as far as I know, nothing has changed there. Using smbclient with debuglevel set high, I see failures with this error:SPNEGO login failed: NT_STATUS_REQUEST_NOT_ACCEPTED
Every now and again, I can connect to one or more shares, but after a few attempts, I can't connect to any more. Tried rebooting the Windows box, but that's had no effect. Oh, and "smbclient -L" shows domain as the host name of the windows box, but anonymous login (smbclient -L -N) shows domain as the workgroup name.
View 5 Replies
View Related
May 20, 2011
I installed a host image in virtualbox. The virtualbox is running on ubuntu and the virtual image is also ubuntu. The ip address of the image is:
Code:
xubuntu@ubuntu-linux1:~/$ ifconfig -a
eth1 Link encap:Ethernet HWaddr 08:00:27:b2:5a:9c
inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:feb2:5a9c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:44 errors:0 dropped:0 overruns:0 frame:0
TX packets:88 errors:0 dropped:0 overruns:0 carrier:0
[Code]...
the host image has an apache server running, and I want to access the server from the local machine. I can access the server with the IP address, but not with the name.
View 1 Replies
View Related
