Fedora Networking :: Booting Manager Fail And Doesn't Appear?

May 31, 2011

I use fedora 15 and everything was ok , Now on booting network manager fail and dosn't appear .Iuse gnome 3

View 4 Replies


ADVERTISEMENT

Fedora Networking :: 3G Dongle Doesn't Appear In Network Manager?

Jan 20, 2009

I have run Fedora 9 and 10 on my Dell Inspiron 640m for about 6 months now and generally experience very few issues with it. Specifically I've been running Fedora 10 KDE 64bit since it was launched. Up until I had to reload it a couple of weeks ago my Vodafone Huawei E172 3G dongle worked perfectly with Network Manager. Since the reload the dongle is detected by the OS (lsusb lists it correctly, etc) but nothing I do will make it appear in Network Manager.

I've tried manually configuring a GSM connection then plugging it in, but no joy. I've also tried using it in my Acer Aspire One which runs Fedora 10 XFCE and it work, but when I try it in another Dell Laptop running Fedora 10 KDE 64 bit it doesn't. I'm assuming that a recent update must have caused some issue as it has definitely worked in both Dell laptops in the past. As mentioned I've reloaded recently but the other laptop hasn't been.

I'm unsure where to go from here. I haven't been able to get Vodafone's beta drivers working under F10 (although I did under F9) and can't find any posts on this issue. The version of Network Manager that I'm running is NetworkManager-0.7.0-1.git20090102.fc10.src.rpm, which was released shortly before I reloaded. Chances are I just didn't try my dongle between the update coming out and the reload, so didn't notice the problem before hand.

View 14 Replies View Related

Fedora Networking :: Network Manager Doesn't Detect WiFi Card?

Dec 22, 2009

I just installed x64 Fedora, and as the title says, NM fails to detect my WiFi card. It's an Encore ENLWI-N with a RaLink RT2800 chipset. The card does show up when I run lspci, although iwconfig yields nothing.Not sure if this helps, but when Ias running Karmic Koala, Ubuntu detected the card immediately and required no configuration

View 2 Replies View Related

Fedora Networking :: Network Manager - Adsl Connection - Ifup Ppp0 Doesn't Work

Nov 22, 2009

I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor
Code:

pppoe-connect
commands work. When I type
Code:
pppoe-connect
, it says
Code:
/usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT
"$@" > /dev/null 2>&1
. When I type

Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.

View 2 Replies View Related

Ubuntu Installation :: Synaptic Package Manager/Update Manager Fail?

Jan 13, 2011

E: Type 'nchpad.net/ubuntu-wine/ppa/ubuntu' is not known on line 1 in source list /etc/apt/sources.list.d/ubuntu-wine-ppa-maverick.list E: The list of sources could not be read. The above is the console output when i type sudo apt-get update Update manager throws the same error so now I can't install or update software .

View 2 Replies View Related

Ubuntu Networking :: Booting Up The Server Doesn't Connect To The Wireless Network?

Oct 5, 2010

i'm experiencing some weird behaviour: I have a server running ubuntu 10.04 and two Apple laptops in my home network. Sometimes after booting up the server doesn't connect to the wireless network, but instead "kills" the connection of the laptops. (The network then isn't available for about two minutes - it's showing but it can't connect) On the server the network interface is up, but not associated.

Sometimes the interface isn't configured properly (iwconfig isn't showing an entry) - but in this case the behaviour obviously isn't showing. some information about my system:

Ubuntu Version: Server 10.04x64
Wireless Card: Netgear WG311v3 with marvell chipset
Driver: ndiswrapper+mrv8335x64

View 4 Replies View Related

Ubuntu Networking :: Network Manager Running Only It Doesn't Now?

Apr 22, 2010

I had network manager running on my netbook karma install, but when I installed VNC as another display, logged into that other display and accidentally clicked on not to run network manager on startup cause there is already one running, it screwed up the network manager auto startup on my normal netbook display.I tried adding it back into auto start in settings but that has not worked.As always, thanks for any help you can give me getting this to auto start again on login, without deleting my kde cache(cos it is setup the way I want it).

View 3 Replies View Related

Fedora Installation :: ISCSI - Booting Doesn't Work

Aug 10, 2011

So I've been trying to install to an iSCSI target for the past two weeks and while the installation finishes, booting doesn't work. I get dropped to a shell after boot installation. I have seen some bugs on red hat bugzilla 705213, but don't know how to resolve it. I'm new to Fedora but really want to embrace the distro

View 2 Replies View Related

Fedora Networking :: 13 - NFS Mounts Fail ?

Jun 13, 2010

I have upgraded three machines to Fedora 13.

On all of them any attempt to mount an nfs drive fails with:

Code:

This happens immediately - within a few tenths of a second at most. It happens whether I use mount -a(mounts are listed in the fstab file) or a full mount command. It happens on both 32-bit and 64-bit installs.

Nothing appears in the messages log file on either the server or the client machine.

It was working in Fedora 12.

Iptables and ip6tables are both disabled. nfsd is running.

Hosts.allow and hosts.deny both exist on the client, but are empty. They contain nothing but comment lines.

I can ping the server and run ssh shells to it. I can open Web pages in Firefox.

The server is CentOS 5.4.

View 3 Replies View Related

Ubuntu Networking :: Network Manager Doesn't Seem To Be Able To Use Modem To Connect To Internet

Feb 9, 2010

I have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.

View 9 Replies View Related

Ubuntu Networking :: Network Manager Icon Doesn't Show Wireless APs?

Feb 10, 2010

I deleted all APs in my Wireless Section of network manager. After that, the whole network manager icon disappeared. I added the icon back on the panel, but I don't think its the right one. It doesn't do the two green cicles thing when I connect my ethernet wire in. It also doesn't show any wireless AP when I left click on the icon. It doesn't even have an X mark on the bottom left of the icon when no network is detected

View 1 Replies View Related

Ubuntu Networking :: Network Manager Doesn't Show Up In Notification Area

Jun 8, 2010

im just getting the hang of ubuntu 9.10, and then all of a sudden 10.04 comes over and screws everything up with the upgrade. i did the upgrade, and now the network manager wont show up in notification areas. any clue as to why? help is greatly appreciated. also, my machine does register that the drivers for wireless card is installed, and when i run lshw -c net command with sudo priveleges, it says it can detect networks, so im confused as hell.

View 9 Replies View Related

Ubuntu Networking :: NFS Doesn't Mount Correctly - Network Manager And Upstart

Sep 25, 2010

I have the following problem: There are three NFS mounts in /etc/fstab, which are automatically mounted. The network connection runs over NetworkManager. Since NWM brings up the network asynchronously, NFS doesn't mount correctly on the first try, but is loaded soon enough since mount automatically retries until it works.

I can live with the fact that I have an error in my boot messages, since everything is up in time for the user. But, I need a (selfmade) upstart script which depends on the NFS mount being up. Even using "remote-filesystems" as the trigger doesn't help, because the trigger is apparently sent after the first failed try (I checked with cat /proc/mounts in my script, the nfs mounts are clearly not up.) Can I somehow force the remote mounts to wait until NWM is up, or make the NFS mount emit an event when the mounts really get mounted?

View 6 Replies View Related

Ubuntu Networking :: Network Manager Doesn't Recognize Nas0 Interface?

Dec 23, 2010

Network manager doesn't recognize nas0 interface and i have problems with using Gwibber, Evolution mail,Empathy, etc Is there any way to add nas0 in Network manager?? I know the solution to remove Network manager, but i need Network manager because i'm often using wireless (as second internet connection).

View 1 Replies View Related

Ubuntu Networking :: IPhone Tether And Network Manager - Doesn't Connect

Apr 2, 2011

This is on Lucid, using a Dell Mini. I installed the required packages for a USB tether to my iPhone. Network Manager recognized it immediately as wwan0, but it doesn't connect. Also, it never asks me for the password to connect to the Personal Hotspot (as it does when I can connect from Windows).

View 3 Replies View Related

Fedora Networking :: Authentication Wireless Fail?

Feb 19, 2011

is there a "debug" method for your wireless connection. My authentication for 2 laptops Dell d600 and IBM t42 both are unable to connectreless routers (2 different ones).Fedora 14 32bit Gnome NetworkManager

View 13 Replies View Related

Fedora Networking :: Fail To Connect To The Wireless Route In F9?

Feb 15, 2009

i am confused with the wlan0 connection when i type iwconfig wlan0 in the terminal i got something like this:

[Code]...

View 2 Replies View Related

Fedora Networking :: Bonding Configuration Ethernet Fail Over

Oct 19, 2009

I instaled HPML350 G6 server. I would like to configure ethernet fail over. I got the script from my friend and configured and restarted the network services. I am getting the error message that ""Deprecated configure file /etc/modprobe.conf, all config files belonging to /etc/modprobe.d". System automatically assigning IP address also.

View 2 Replies View Related

Fedora Networking :: USB Wireless Card Ok In Gnome But Fail In KDE

Nov 24, 2010

I connected to internet via a USB wireless card, it works OK in GNOME, but it can't be detected on KDE. When enter KDE, iwconfig can not find any wlan. Wireless network connection not configured caused no wireless AP available, so the network not available. After I configured the wireless connection, The problem fixed. I'm replying in KDE now.

View 1 Replies View Related

Ubuntu Networking :: Stick On Network Manager 0.8 Doesn't Work - Restore Karmic's Version?

Feb 26, 2010

I added a repo from launchpad to install latest Network Manager and then installed it (version 0.8). Then I decided to rollback to Karmic's version (since 0.8 doesn't work) but failed: I removed the repo from sources.list

Then apt-get udpate
Then apt-get clean
Then apt-get install network-manager...

But still 0.8 version is downloaded and installed! How can I restore Karmic's version?

View 8 Replies View Related

Fedora Installation :: Virtual Machine Manager Doesn't Want To Start

Sep 27, 2010

installed vmm, then when i tried mounting i get this error message;Unable to open a connection to the libvirt management daemon.

View 3 Replies View Related

Fedora :: Mumble / Murmur Package In The Manager Doesn't Seem To Install

Mar 15, 2011

I am just starting to use fedora as I'm on compsoc committee at my uni, and need to be able to use the server which runs it. Am trying to get a mumble server running (just on my laptop with a fedora 14 install) And am really struggling, can't get the stuff manually and do it, as it says it depends on some other packages which I can't find in the package manager, and if I just use the murmur package in the manager, then it doesn't seem to install, and even if it does, if I try to run it, it says the database is not writeable

[URL]

View 14 Replies View Related

OpenSUSE Wireless :: Can't Connect To Network Manager Fail In GNOME?

Apr 11, 2010

I have an Atheros ar5007eg wireless card, and I haven't had problems with this card in GNOME. However, when I made the switch to KDE recently, I can't connect to any wireless networks. A wired connection works fine (that's how I'm writing this), but when I try to connect to any wireless network, it hangs at Acquiring IP Address, then asks me for my WEP key again, I enter it, and the process starts over. I tried using WICD, but I'm not sure if I set it up properly.

View 2 Replies View Related

Networking :: Manager Not Listing All Networks / Doesn't Show Them In The List When Left Click The Tray Icon?

Jul 3, 2010

I have two wifi routers. If I stand next to the main one with my laptop I can connect and access the internet no problem. The other router is in my office, and the bridging is messed up, so while I see the essid and bssid using 'iwlist scanning' and nm-tool, I can't connect to it.

Now, my main router's signal still reaches to my office, just not as strong as the borked router in my office. I need to be able to choose which wifi network to connect to without wasting time walking between rooms. I added entries for both in network-manager, but it doesn't show them in the list when I left click the tray icon! How the do I connect to the network I want?

View 1 Replies View Related

Fedora Networking :: Mobile Broadband Fail After NetworkManager Update / What To Do?

Mar 11, 2009

I have a Mobile Broadband connection (as NetworkManager calls it) that works very well until the latest update. Now it fails to connect 99.9% of the time. When it does connect it works very sluggishly.

I didn't update a second computer I have and it still works fine here. Both run F10 x86_64, both are fully updated (except for NM on this one).

Output of grep NetworkManager /var/log/messages | tail -100 from non working machine code...

View 14 Replies View Related

Fedora Networking :: Firefox (Flash) Proper Install (Fail)

Mar 26, 2011

I am doing something wrong. Just connected Fedora 14 to the internet. I wanted to do a speed test and this requires flash. I have download the linux (yum) version and tried to install adobe-release-i386-1.0-1.noarch.rpm no idea what is needed to be done next.

View 8 Replies View Related

Fedora Networking :: Globetrotter HSDPA Modem - Identified As A Serial Device - Fail To Get It Working

May 7, 2009

I have bought a so-called web'n'walk stick, which identifies itself as a "Globetrotter HSDPA Model". I managed to get it identified as a serial device (initially, it is detected as a USB drive), but I fail to get it working.

Things that might be of interest:

Code:

Code:

View 1 Replies View Related

Fedora :: Compile From Source - Install Buddi Budget Manager And The ./configure Command Doesn’t Work

Nov 24, 2009

Ive been using linux for a few months now and every now and again i come accross a program that doesnt have a rpm package but says that it can be installed on Fedora using source. I'm familiar with build essentials and the following commands:-

tar xzvf package.tar.gz
cd package
./configure
make
make install

but from what i have read fedora uses a differnet compiler. I'm trying to install Buddi budget manager and the ./configure command doesnt work, which im guessing is because it doesnt have a configure file? Can anyone confirm how to compile from source and whether there are any tutorials specific to fedora.

View 4 Replies View Related

Fedora Installation :: GRUB Doesn't Load - Make Load Again Upon Booting?

Feb 9, 2009

I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:

[Code]...

What do I need to do to make GRUB load again upon booting?

View 2 Replies View Related

Ubuntu :: 10.10 Not Booting / LiveCD Doesn't Boot / Grub Recovery Mode Doesn't Boot

Jan 4, 2011

Ubuntu 10.10 doesn't boot at all. The liveCD only boots once every like 30 attempts, installing from liveCD froze, but the Alternate CD worked and installed ubuntu. Now when I try to boot into it using GRUB, it freezes at the beginning of the boot process.With normal boot it freezes at line: Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox.With recovery mode it freezes even before showing me anything

A little kinda like the liveCD, if I try like 30 times, it might manage to boot once in normal mode.That line keeps on repeating, the the xxx.xxx integer changes each time, and this goes on forever.I tried removing my floppy drive, but it didn't help.I tried to boot with fd0=noprobeThe one time it booted, when I restarted, it froze while trying to restart.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved