Just purchased a Asus USB-N13, and having follwed a mixture of tutorials, including the readme on the driver disk, i have had no luck in getting this adapter to work.Upon using "sudo iwlist ra0 scan" the adapter can see multiple networks, however device manager is stating that the device is not managed. How can I get this sorted and connect to a network?
View 1 Replies
After the use of pppoeconf, the network manager does not recognise neither the wired nor the wireless connection anymore. (It nicely did it before that) I tried to replace the etc/network manager folder with that of a different machine. Still the same. What else can I do to reset Network Manager ?
View 1 Replies View RelatedI have eventually (a week's work) got my Ubuntu 10.04 to recognise my Asus N13 WiFi dongle (had to compile the source from Ralink with the "y" against the two things it tells you to if you want network manager to work (source that came with dongle wouldn't compile) and then set up rules (for some reason the driver - rt2870sta - wouldn't recognise the dongle until the rule about the vendor and product ID was in place; and the drivers that come with Ubuntu wouldn't recognise it even with the rule in place)).
Big thank you to chilli555 for all of the posts that got me this far.I would like to use the Network Manager app that comes with Ubuntu, to control the dongle. At the moment it will aknowledge when the driver has been loaded (have to do a modprobe), but does not "see" any of the many WiFi routers around my house, so I can't click on one to select one.
My only guess on this is that, to get the dongle to work I copied the config file that is part of the driver source files into /etc/Wireless/RT2870, and this is getting in the way. However, I have tried removing it and the network manager still doesn't work. Or is it because the network manager needs the dongle to be called "wlan0" and it's called "ra0"? If so, can you aliase this?
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
I use my T61 both wireless and in the dock, where I switch to the wired connection. After the latest round of updates, I seem to have lost the ability to switch to the wired network. When I turn the laptop on, I see it connect to the wireless network, but when I left click on the tray icon under Wired Network is says Device not managed. I have not made any changes to anything in the last couple weeks, besides some updates. How do I go about getting the wired network back in there?I tried to add eth0 back into System - Preferences - Network Connections, but whenever I try and add eth0, but it still says Device not managed.
View 2 Replies View RelatedI'm having trouble getting onto the internet with ubuntu 9.04. I have just moved house and have just got the internet set up here (typing this on windows laptop with wireless). My ubuntu desktop is plugged in to the network, but in the top right hand corner when I click on the network icon I get: "Wired network device not managed"
In my old house I had a static IP. Is this anything to do with it?
Can you "split" a network interface in Ubuntu, similar to how airmon-ng lets you use your wireless card in managed and monitor mode, by making another interface out of the same hardware? I know it'd be slower, but I'd still like to do it.
View 4 Replies View RelatedI recently bought an Asus laptop and had a friend install ubuntu 10.04. After the install was complete I tried to connect to a network and there was no networks available. After some research time my friend said the I need network drivers to install in ubuntu.
View 8 Replies View RelatedI'm running Squeeze and I'm looking 3 days now for a solution in some weird problem. The NetworkManager Applet shows that there isn't connection although I am connected. The icon has this small "x" and when mouseover it says "No network conncection". Moreover when left clicking it, it says
"Wired Network Device not managed"
While I was looking for the solution a came across this post by an Ubuntu developer who says:network-manager-applet displays the connectivity state of network-manager's managed interfaces not every interface. So the title "network manager says disconnected but is connected and working" is actually misleading. The interface is connected and working but not from network-manager's point of view since it is not managing the interface. Additionally, in Lucid now network-manager applet displays nothing now for non-managed interfaces so is less misleading. You can check to see whether or not an interface is managed by network-manager by using the command line too nm-tool. You'll see "State: unmanaged" for unmanaged interfaces.
I'm running Linux Mint 9 KDE on a HP 6735s laptop. Wired internet connection worked out of the box; for wireless I had to install some propietary wireless drivers (Broadcom) before I could connect to my home wifi.Last night the laptop stayed on while running on batteries, and it eventually shut itself down when the batteries ran out. Today I have no connectivity whatsoever; not wired, not wireless. The network tray icon says "not managed".
View 4 Replies View RelatedSome data:Attached because on posting I get an error even though there is not a singel image or smiley:You have included 11 images in your message. You are limited to using 8 images so please go back and correct the problem and then continue again. Images include use of smilies, the BB code [img] tag and HTML <img> tags. The use of these is all subject to them being enabled by the administrator.Couldn't upload either it gives invalid file so I resort to Google docs now [URL]
View 9 Replies View RelatedRunning Ubuntu 10.04 Unable to get Ubuntu to find the ASUS USB Wireless to connect for network. I got the Broadcom to work using ndiswrapper but the range on it is unbearable meaning I have to be in the same room as the router. Hoping this has a much better range.
[Code]...
I have ASUS Laptop A6Rseries was running XP untill I installed Linux 9.10. Now i am having problem connecting to my wireless network. I am using Belkin router what works fine with XP, Vista and Windovs 7. Here is some information what I found
lspci
00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
[code]....
I have just purchased an Asus EeePC 1001HA netbook and I would like to install Ubuntu Netbook Edition 9.10 (love the look and the brilliant interface), but I can't get the wireless network to work. I am currently running from a 4Gb USB stick that has the LiveCD on it with a 1Gb persistence. The network notification area only shows wired and VPN connections. I have tried installing the Ralink 3090 driver but I have had no luck in getting the wireless to work.
View 8 Replies View RelatedI recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...
Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.
P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies View RelatedI have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?
View 4 Replies View RelatedI recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
My wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password (which I don't know). Is there any way to blacklist a wireless network so that the Network Manager will never attempt to connect to it?
View 4 Replies View RelatedI had trouble connecting to a wireless network with openSUSE, so I tried the YAST network manager to see if that fixed it. Not only did it not fix it, but now I cannot connect to any network, wired or wireless. I tried to open the default network manager and it said "Network management disabled". How do I re-enable it?I also have set YAST settings back to their originals with no luck.
View 7 Replies View RelatedI'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
View 1 Replies View RelatedWhenever I start up my laptop i do not get a wireless connection automatically. I have to rightclick network manager applet and select enable networking. After that everything works fine untill i shutdown and restart my laptop. I would like a way to change this so that my wifi connection is working whithout having to click something first..
OS:Xubuntu 10.04 LTS!
hardware: dell inspiron 6000
nm applet: 0.8.?
Neither of my wired network connections are listed in the network manager applet. I know that networking seems to be functional since I can ping local devices on the network. I can't resolve DNS names however. I suppose this is because network manager usually handles DNS? I've posted the outputs of various configurations below.
Code:
/etc/NetworkManager/nm-system-settings.cfg
# This file is installed into /etc/NetworkManager, and is loaded by
# NetworkManager by default. To override, specify: '--config file'
# during NM startup. This can be done by appending to DAEMON_OPTS in
[code]....
Loaded Ubuntu 10.4lucid on TransPort NX Mobile Pentium II, 328MiB,Using Netgear Rangemax wn511b. with Broadcom STA wirless driver. bcm43gx.Boot computer and network manager shos "no network devices available" Run system/administration/hardware drivers and the Broadcom STA driver shows up (only one that shows up) REMOVE and then ACTIVATE and the network manager sees it and connects fine. Shut down computer, restart and no device. I am forced to Remove and Activate each time I start the computer.Is there a way to set this driver to be found and run at computer start.
View 4 Replies View RelatedSeems everytime I upgrade wireless quites working.
Anyways, here's the info:-Acer Aspire One AOA150-1997
Quote:
kevin@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code]...
I think that's all that would be needed to help diagnose the issue. I'm kinda new to linux, and this is primarily a music machine.
I have a problem with my internet connection this is the picture the device is Realtek RTL8187. i didn't know how can i manage this device to work so could you help me i don't have an internet connection in ubuntu right know and i really wanna move to ubntu my verison is 9.10
View 9 Replies View RelatedI'm getting rather fed up with this Network Manager applet on Ubuntu and its seemingly erratic behavior.I often use my laptop for things like dhcp server to do pxe boot on other machines for netboot installs and other stuff. Often I have to set static address on eth0 etc.I know how to set a static address for eth0 by editing /etc/network/interfaces and all that good stuff, but when I click on the Network Manager applet, it says 'Wired Network - not managed'.I may have deleted it for some reason, but why does it no longer appear, even though eth0 is working?I've also found in the past that changes to interfaces in the Network Manager, such as giving eth0 a static address, do not seem to stick?
View 6 Replies View RelatedI'm trying to get a wireless PC (PCMCIA?) card working under 10.04 desktop. It does not seem to be recognized by nm-applet and I cannot see any particular reason why. I have disabled the built in wireless (Intel 2200) in both BIOS and by blacklisting the appropriate module so there should be no interference from that. The card is a Linksys WPC300N V1. It has Power and Link/Act LEDs both of which remain dark.
Here's the information I have collected regarding the card:
lshw:
Code:
hbarta@willow:~$ sudo lshw -c network
*-network
description: Ethernet interface
product: 82540EP Gigabit Ethernet Controller (Mobile)
[Code]....
I saw a comment about 'You need to have "managed=true" for NetworkManager to bring the interfaces up. in '/etc/NetworkManager/nm-system-settings.conf and did so but I see no change.
I understand that modules must be compiled to support network-manager but I would expect that to be the case with modules that ship with 10.04. I don't see any obvious indications for why this is not coming up with network-manager. Is there something I;m overlooking or something else I need to do?
I'm getting rather fed up with this Network Manager applet on Ubuntu and its seemingly erratic behaviour. I often use my laptop for things like dhcp server to do pxe boot on other machines for netboot installs and other stuff. Often I have to set static address on eth0 etc. I know how to set a static address for eth0 by editing /etc/network/interfaces and all that good stuff, but when I click on the Network Manager applet, it says 'Wired Network - not managed'. I may have deleted it for some reason, but why does it no longer appear, even though eth0 is working? I've also found in the past that changes to interfaces in the Network Manager, such as giving eth0 a static address, do not seem to stick? It seems the only thing this applet is useful for is connecting to a wireless network.....and only with dhcp !!
View 1 Replies View Related
