My problem has to do with playing a mov video. It's very strange.
- In mplayer I have audio but not video appears.
- In Movie Player I have video but not audio
- In VLC I have not video and the audio is wrong (a lot of noise).
This is the output when I try to open with mplayer:
MPlayer SVN-r31061-4.4.3 (C) 2000-2010 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
I am not able to play certain movie files with MPlayer since a few days: Code: MPlayer dev-SVN-r32749-4.4-openSUSE Linux 11.2 (i686)-Packman (C) 2000-2010 MPlayer Team Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control.
Playing somefile.wmv. ASF file format detected. [asfheader] Audio stream found, -aid 1 [asfheader] Video stream found, -vid 2 VIDEO: [WMV3] 640x480 24bpp 1000.000 fps 1500.0 kbps (183.1 kbyte/s) Opening video decoder: [dmo] DMO video codecs DMO dll supports VO Optimizations 0 1 DMO dll might use previous sample when requested MPlayer interrupted by signal 11 in module: init_video_codec
I am not sure which filetypes are affected by this bug, but I can play *some* files. The specific file here used to work a few days ago. Code: kalle@hoppers:~> file somefile.wmv somefile.wmv: Microsoft ASF The only major thing referring to multimedia in the past few days I remember is installing 'h264enc' from Packman, however, meanwhile I uninstalled this package, yet the problem persists.
Code: kalle@hoppers:~> grep h264enc /var/log/zypp/history 2011-01-15 20:11:53|install|h264enc|9.2.4-0.pm.1.1|noarch|root@hoppers|Packman|c5bd1d534726472929134e5acc8f66492c52c51b 2011-01-20 22:06:20|remove |h264enc|9.2.4-0.pm.1.1|noarch|root@hoppers The only way of solving this was moving MPlayers config, but that did not help either.
Xine also is not able to play this video: Code: kalle@hoppers:~> xine somefile.wmv Dies ist xine (X11 gui) - Ein freier Video-Player v0.99.6. (c) 2000-2007 Das xine Team. [wmv3 @ 0x8f78060] Extra data: 8 bits left, value: 0 xiTK received SIGSEGV signal, RIP.
I ran yum install lircand no lirc support files are installed in /etc/lircd/what is the proper method of installing and getting lirc setup and running?
I'm getting these messages Over SSH with the -D switch
Code:
At uni I did this for a couple of reasons, primarily to connect to trackers for bittorrent. I would get these messages fairly often but I never thought much of it because I figured I was just loosing packets over the network or something (understandable in my situation). At home I decided to continue to use this method because that computer is set up in DMZ and is very useful. I havn't received many of these messages but recently all my torrents stalled and I had a whole bunch of these messages. Is it possible my computer just cant handle all the network connections (it's a 2ghz AMD running debian)? What exactly do these messages mean? Is there any way to optimize my connection in any way?
I installed Linphone from the repositories and got it working, apart from the video, investigation showed that there is no support for video. how to fix this before I install from source (which I have never done ) so that I can have a fully working piece of software. I am using a fully updated version of Fedora 15.
I have installed Fedora 10 on my laptop, but I cannot start GUI at all. Besides, I cannot get sounds, either.... lspci gives me following infos: 00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller 01:00.0 VGA compatible controller: VIA Technologies, Inc. Integrated Video my laptop is a little bit out of date, sound card and video card are integrated.
I thought this may be of interest, so I'm sharing. I've built some experimental mplayer packages for Fedora 11 and Rawhide (x86-32 and x86-64 arches) with shiny new features. Aside from being very recent snapshots, one of them includes support for hardware video playback acceleration via VDPAU and VAAPI, and the other includes support for multi-threaded playback (so you can split the decoding load across multiple cores).
The playback acceleration can definitely be used on NVIDIA adapters (from the GeForce 8xxx series onwards) using the proprietary driver (not, unfortunately, nouveau). Also on Intel Poulsbo (GMA 500) adapters, using my packaged version of the native driver for that chipset (link is in the blog post). VDPAU acceleration is also allegedly possible on S3 Chrome 530 GT and S3 Chrome 540 GTX adapters using S3�s own driver, but I haven't had the chance to test that. Multi-threaded playback can be done on any system, but only really makes sense on those with multiple processors (cores).
Full details of where, how and why are in my blog post:[URL]..
I recently installed fedora 14 on my Asus laptop with Nvidia GEForce 130m Cuda Video card. I installed the nvidia drivers, but when I go to configure any sort of visual effects in systemsettings it says Code: Your hardware cannot support visual effects due to the following problem: The problem is that it gives no problems for me to fix! How can I find out what the issue is?
I am running Red Hat Enterprise Server 6.0 I am having issues getting kerberos configured as a client to join a domain. Im getting below error message. "Failed to join domain: failed to connect to AD: KDC has no support for encryption type"
I am trying to configure and compile the pam_ldap and nss_ldap for MIPS architecture. for this they need ldap library. so I am trying to compile openldap code for MIPS first, but the configuration is failing.The command and options used for configuration is as follows.
When i try to create a virtual machine using the Windows 7 Enterprise Evaluation iso file, everything goes as planned untill i click on the start button. when i click on it i get two error messages. the first: Failed to open a session for the virtual machine Windows 7. The virtual machine 'Windows 7' has terminated unexpectedly during startup with exit code 1. Kernel driver not installed (rc=-1908). The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. i have installed the DKMS package, but when i try to run the command stated in the error message, i get another error message in the terminal:
[code]...
i have to install the driver that is specified (vboxdrv) but i do not know where to find it.
I am trying to install Fedora 12 using the x86-64 DVD. My problem is everytime I try to install with the normal settings or basic video deriver setting it says "X failed to load" and so Anaconda never loads. How do i fix this problem. I have an Nvidia 7800GTX.
When configuring a custom kernel using fedoraproject.org instructions, the make menuconfig options for LIRC are not in the .config file anywhere. I checked the kernel tree and all the files are there in the .../drivers/input/lirc subdirectory (I need the lirc_dev and lirc_i2c drivers). I reset the .config to its original settings to make sure I didn't mess up. I also grep'ed the .config file for any LIRC related settings, none found. Also I'm not getting any sound from the radio-aztech driver.
Phenom 9500+ quad core, 3GB RAM, Nvidia 8800GT: 260.19.36 driver.Installed the latest Boxee for Linux. Got my remote setup. Everything works except when I open a video it opens in a tiny box in the upper left hand corner of my monitor.Is there any way to get Boxee videos to play full-screen?
Since I upgrade our cluster from the FC14 to the FC15 I have a bad problem with the tftpd server. I have some thinstations booting over the network after the update the boot failed with the message "TFTP open timeout". I use an "ip alias" (cluster adress) for the tftp server (next-server in the dhcp), when I use the real ip I have no problem. I found some information about a "Service Guard environment" and an option to enable it:
"This option is required for some tftp clients. These clients reject the tftp reply received from a different IP address than the one requested when the server?s interface is configured with an alias IP address." I do not see an option like that in the tftpd server of the FC15.
I've been trying to view the footage I have in 1080i AVCHD on my new system but can only view it in VLC, and then only when hardware acceleration is turned off, and there's still a bit of shearing with a hexcore and a Radeon 5850.
Is there a trick to get it to play and/or preview in Mplayer/OpenShot/PiTiVi ? I've tried them all, and I can hear sound but no video. Maybe there's a system-wide way to shut off video decode acceleration.
I guess what I'm asking is, can anyone play/preview/edit in these applications with AVCHD or is it something with my new system? Everything else seems to work great. Maybe I need to try turning off compiz compositing?
Unfortunately, I bought the damn thing to do exactly this kind of video editing, and don't want to have to drop back into Win 7 to use Vegas.
how do i enable video support for pidgin?, or is it on by default?? because when i click a chat room from yahoo's list of rooms(that say people have web-cams)i don't see any options to view any of the webcams.
In kubuntu, I know of a package kffmpegthumbnailer for video thumbnailing support. For Gnome on Debian, ffmpegthumbnailer is in the repos. I cannot however find kffmpegthumbnailer for my KDE Squeeze in the repos. Where is it? Or, is there a good replacement?
I just reinstalled yesterday Ubuntu on my second PC, I didn't use 2nd PC for a while so I decided it is time to refresh Ubuntu on it. I installed sopcast to watch some football games. I setup VLC as a main player, so when I past address to sopcast and start bufforing VLC turned on and I was able to watch game, after sec some small windows with error appeared sayin' "VLC probably does not support this sound or video format "wmap"" I closed this windows and noticed there is no sound... I don't know how to fix this problem it never happend before.
When I try mplayer with different distros, I get different results. Right now I have Kubuntu Karmic on the hard drive, but most of the time I'm running Kiara, which is a rebuild of Slax, from a live CD. With Slax, and (I believe) also with Slackware, Mplayer doesn't seem to support playing flv (flash video), or, strange to say, ogg. Now, with Karmic, I can't get full-screen video, though I can get that with most Debian-based distros, including the earlier kubuntu jaunty. Any way of closing up these gaps?
I recorded some videos on my cell phone then downloaded them to the computer. VLC will play the video but no sound. Below is the message vlc display while the video is playing.No suitable decoder module:VLC does not support the audio or video format "samr". Unfortunately there is no way for you to fix this.
With Karmic there's some support for the ati radeon 7000 ve, but it's the default driver with limited or no 3d function. Previous distros supported radeon 7000 ve. Is it likely to expect that Lucid will not support this video card.
At the moment the Android version of Skype doesn't support video chat at the moment, just audio.There are lots of apps in Android for video chat (Oovoo, Tango), but I can't find one that will allow me to video chat from the phone to an Ubuntu laptop.
I want to download a software and it is in .rar File. So I put this in the terminal: Code: sudo apt-get install unrar It installed fine but now how do I open the Rar File? Also is it true that Linux doesn't support many softwares?
Can anyone recommend any open source customer support portal software? I'm looking for something where users can sign in, and submit support tickets for a wide variety of issues (game play, billing, etc). Then a Support Agent can login and assign tickets, respond, etc. I've already started looking at bugzilla, but I was hoping to find some other options to compare to.
