OpenSUSE Multimedia :: MPlayer Crashes - Failed To Open LIRC Support

Jan 20, 2011

I am not able to play certain movie files with MPlayer since a few days:
Code:
MPlayer dev-SVN-r32749-4.4-openSUSE Linux 11.2 (i686)-Packman (C) 2000-2010 MPlayer Team
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing somefile.wmv.
ASF file format detected.
[asfheader] Audio stream found, -aid 1
[asfheader] Video stream found, -vid 2
VIDEO: [WMV3] 640x480 24bpp 1000.000 fps 1500.0 kbps (183.1 kbyte/s)
Opening video decoder: [dmo] DMO video codecs
DMO dll supports VO Optimizations 0 1
DMO dll might use previous sample when requested
MPlayer interrupted by signal 11 in module: init_video_codec

I am not sure which filetypes are affected by this bug, but I can play *some* files. The specific file here used to work a few days ago.
Code:
kalle@hoppers:~> file somefile.wmv
somefile.wmv: Microsoft ASF
The only major thing referring to multimedia in the past few days I remember is installing 'h264enc' from Packman, however, meanwhile I uninstalled this package, yet the problem persists.

Code:
kalle@hoppers:~> grep h264enc /var/log/zypp/history
2011-01-15 20:11:53|install|h264enc|9.2.4-0.pm.1.1|noarch|root@hoppers|Packman|c5bd1d534726472929134e5acc8f66492c52c51b
2011-01-20 22:06:20|remove |h264enc|9.2.4-0.pm.1.1|noarch|root@hoppers
The only way of solving this was moving MPlayers config, but that did not help either.

Xine also is not able to play this video:
Code:
kalle@hoppers:~> xine somefile.wmv
Dies ist xine (X11 gui) - Ein freier Video-Player v0.99.6.
(c) 2000-2007 Das xine Team.
[wmv3 @ 0x8f78060] Extra data: 8 bits left, value: 0
xiTK received SIGSEGV signal, RIP.

View 9 Replies


ADVERTISEMENT

Fedora :: MOV Video - Failed To Open LIRC Support

Jun 24, 2010

My problem has to do with playing a mov video. It's very strange.
- In mplayer I have audio but not video appears.
- In Movie Player I have video but not audio
- In VLC I have not video and the audio is wrong (a lot of noise).

This is the output when I try to open with mplayer:
MPlayer SVN-r31061-4.4.3 (C) 2000-2010 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing 0101.mov.
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xac37bd0]max_analyze_duration reached
[lavf] Video stream found, -vid 0
[lavf] Audio stream found, -aid 1
VIDEO: [smc ] 640x480 8bpp 1.000 fps 4.2 kbps ( 0.5 kbyte/s) .....

View 14 Replies View Related

Ubuntu Multimedia :: Cannot Get MPlayer To Work With Lirc On Non GUI System

Mar 26, 2010

I'm setting up a gui-less music server so there's no login, and I've tried using mplayer's lirc interface as well as irexec (sending mplayer slave commands to a fifo). But I can't get mplayer to work unless I start either irexec or mplayer from a logged in session. So my S99test is something like:

Code:
#!/bin/sh
#irexec -d
#OR
#mplayer myfile.mp3

If I use the "mplayer" line, I do hear music at startup, but no lirc control. Yet if I log in and kill the mplayer and rerun S99test as root, all works fine.

View 2 Replies View Related

Ubuntu Multimedia :: Dvd Menu Support For Mplayer?

Jul 17, 2011

I am using mplayer with Umplayer/Smplayer as graphic front ends. I have enabled DVD menus by checking the box in Preference > Drives in Umplayer(also tried Smplayer) but there is still no menu when I stick a DVD in the dvd drive, on the other hand the menus show up if I use VLC to play the DVD so it is not the dvd's problem.

I have already installed libdvdnav4.

View 9 Replies View Related

Ubuntu Multimedia :: Does Karmic Mplayer Have VDPAU Support Out Of The Box?

Mar 3, 2010

1) Does Karmic mplayer have VDPAU support out of the box? If not, why doesn't it?

2) Does LUCID mplayer have VDPAU support "..."?

3) If Lucid doesn't, can I use the Karmic VDPAU PPA for Lucid, or much I compile mplayer myself?

4) Point me to a place with instructions on compiling mplayer with VDPAU support. If you don't know, I'll just google it.

View 2 Replies View Related

Ubuntu Multimedia :: Can't Compile Mplayer / Mencoder With Libvpx Support

Apr 26, 2011

I want to encode video content with mencoder and libvpx codec. I have libvpx installed on my machine and I can encode with libvpx using ffmpeg. My OS is Ubuntu 10.10, 64bit. I downloaded fresh mplayer/mencoder from SVN repository. If I configure mplayer/mencoder without any explicit enabled features using:

[Code]...

View 3 Replies View Related

Ubuntu Multimedia :: Find A Package For Mplayer With Dvdnav Support Enabled?

Jul 10, 2010

where I can find a package for mplayer with dvdnav support enabled?

I was disappointed to discover that in 10.04 dvdnav support was disabled in mplayer. I rely on it for my mythtv front end box to be able to play DVDs. According to a bug it was disabled because of an upstream email chain where dvdnav was considered 'experimental' and 'not ready for production use'. Funny as it worked fine for me.

Post #6 here is where I found the above reasoning for it being disabled.

[URL]

View 8 Replies View Related

Fedora Hardware :: F13: Lirc Support Files Not Installed?

Jun 4, 2010

I ran yum install lircand no lirc support files are installed in /etc/lircd/what is the proper method of installing and getting lirc setup and running?

View 2 Replies View Related

Ubuntu Multimedia :: Mplayer Capture Screenshot From M2TS Failed?

Jul 14, 2011

I'm running Ubuntu 10.04, and installed mplayer, when I tried to SSH and capture a screenshot from a m2ts file, I always get an error: number of reference frames exceeds max (probably corrupt input)But i'm sure the file isn't corrupt. However, I did captured a picture, but the picture is corrupt.Here is the log:

Code:
root@ahdee: ~root@ahdee:~# mplayer -ss 71550 -noframedrop -nosound -vo jpeg -frames 1 '/home/ahdee/downloads/TEST/BDMV/STREAM/00238.m2ts'

[code].....

View 3 Replies View Related

Ubuntu Multimedia :: 9.10 AMD Crashes: NVIDIA Failed To Initialize The GLX Module?

Mar 25, 2010

I'm running ubuntu 9.10 64 bit (2.6.31-20-generic) on a Z600 HP. My graphics card is Nvidia quadro NVS450. I am using the Ubuntu Nvidia driver 185.18.36. I am experiencing random, daily system freezes where the system has to be manually rebooted. After installing the crash dump packages I am now getting a crash dump file and it's clear the problem relates to my graphics card.

Is this a red herring or the cause of my problems:
(EE) Failed to load /usr/lib/xorg/modules/extensions//libglx.so
(EE) Failed to load module "glx" (loader failed,
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X

The NVIDIA X Server Settings shows a message "Failed to query the GLX server vendor".

Here is my xorg.conf file:
$ cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009
Section "ServerLayout"

[Code]...

View 2 Replies View Related

OpenSUSE :: KMail : Hangs, Crashes, Failed Starts?

Aug 20, 2010

I have been plagued by problems with KMail. Sometimes Akonadi server fails to start:

Code:
[
0: akonadiserver(_Z11akBacktracev+0x39) [0x40c5d9]

[code]....

View 5 Replies View Related

OpenSUSE :: VLC Player Crashes Trying To Open Mkv Files?

Mar 1, 2011

My vlc player cannot open mkv files for some reason :S I checked and it seems like it complied with --enable-mkv option, so no problem in that. When I open it in the terminal and try to open mkv file, last thing in the message is "segmentation fault".

View 4 Replies View Related

Networking :: Ssh -D - Channel 6 - Open Failed - Administratively Prohibited - Open Failed

May 24, 2009

I'm getting these messages Over SSH with the -D switch

Code:

At uni I did this for a couple of reasons, primarily to connect to trackers for bittorrent. I would get these messages fairly often but I never thought much of it because I figured I was just loosing packets over the network or something (understandable in my situation). At home I decided to continue to use this method because that computer is set up in DMZ and is very useful. I havn't received many of these messages but recently all my torrents stalled and I had a whole bunch of these messages. Is it possible my computer just cant handle all the network connections (it's a 2ghz AMD running debian)? What exactly do these messages mean? Is there any way to optimize my connection in any way?

View 1 Replies View Related

OpenSUSE Install :: ATI Driver - Boot But X Windows Crashes When Open Any Application?

Apr 4, 2011

I am new to opensuse, having migrated from Ubuntu. I have had some difficulty with power management on Ubuntu so i decided to install opensuse with kde as i heard it was good for laptops. I have had lots of trouble getting opensuse 11.4 to boot properly and to run without freezing.

I have trawled the forums and bugzilla and the documentation, e.g. SDB:ATI - openSUSE and SDB:Configuring graphics cards - openSUSE. Consequently i am now able to boot (normally), however whenever i open any application, e.g. Dolphin file manager, Firefox, etc, the tab starts to load (little circle starts spinning on the tab), and then it freezes.

At this point I can exit X Windows and enter the text mode. I have repeated this with the FGLRX and Radeon drivers running. This is always repeatable. I can also boot into level 3 and do things there.

My computer details are:
HP Pavilion dv6 3032TX
Processor - Intel i7 720 QM
Ram - 6GB
GPU - ATI Mobility Radeon 5650
Harddrive - 640GB 5400rpm

[Code]...

What i have tried so far:

1. First 4 steps on SDB:Configuring graphics cards - openSUSE
2. Install and run FGLRX

Note that i cannot failsafe boot - it never boots into X Windows and just hangs. I really do like the look and feel of opensuse and would love to use it, but at this point my only option is to try another distro.

View 3 Replies View Related

OpenSUSE Multimedia :: Packman MPlayer And Vorbis On 11.2?

Dec 21, 2009

I've noticed the Packman mplayer's ffvorbis doesn't seem to be working on 11.2 (x86)-any vorbis seems to be decoded as very quiet noise that roughly matches the sound that ought to be made. Audio output (-ao) doesn't make any difference, and I've the same problem on three different machines. Xine, vlc, ffplay, etc. all work, as does -afm tremor (the reference decoder) with mplayer. The verbose output from mplayer seems to be the same between these systems and an older 11.0 system with a not-very-recently-upgraded version of mplayer. Unfortunately, packman does not keep old versions of packages, and compiling mplayer is somewhat of a chore, so it is not immediately easy to test an old version of MPlayer on 11.2 for me.

I'm using the samples from Vorbis.com: Music to test with, so I assume there is nothing peculiar about the files.

Is anyone successfully using current (1.0rc2_r29796) Packman MPlayer to play either vorbis .oggs or video with vorbis audio on 11.2? If so, was it a fresh install or an upgrade system? Architecture? Etc.-I've run out of machines to easily test on, and it doesn't work on any of them.

I realize that this is better-addressed to the Packman mailing list, but very few users seem to read it, and for whatever reason, the packagers never seem to have any problems with their own packages (even when they are clearly broken for many others); so I thought I would give it a try here first.

View 2 Replies View Related

OpenSUSE Multimedia :: Streaming Tv With Smplayer/mplayer?

Jan 2, 2010

A Happy and Prosperous New Year openSUSE!!!!

When a tv stream is opened with smplayer it goes nowhere.
A snippet from the smplayer log:
[10:20:47:604] Playlist:layItem: out of range
[10:20:47:604] BaseGui:laylistHasFinished
[10:20:50:387] Core::changeOSD: 1
[10:20:50:388] Core:ausing_prefix

[Code]...

View 2 Replies View Related

OpenSUSE Multimedia :: MPlayer Can't Find Libvdpau?

Aug 29, 2010

Not sure when this first happened but I suspect it was just a couple of days ago. I had installed DeVeDe to burn some video to disc and it all worked fine but now when I try to run DeVeDe it says it can't find mplayer and you have to quit. I've tracked this back to mplayer and I'm getting this error from mplayer:

mplayer: error while loading shared libraries: libvdpau.so.1: cannot open shared object file: No such file or directory libvdpau is installed so I don't know why it can't find the library.

I see there are issues with vdpau and nvidia but this shouldn't be affecting me should it??

View 6 Replies View Related

OpenSUSE Multimedia :: 11.4 - How To Bypass Pulseaudio In MPlayer

Mar 12, 2011

I have the restricted format software installed via one-click-install. I found that in 11.4 mplayer would fail to start playing a MP3 clip, but succeed on the second and subsequent tries, but only within a short time afterwards. A quick examination showed that this was because mplayer was firing off an instance of pulseaudio, which stayed around for a while, then exited. This was not acceptable for a clip played from a cron job so I found the way to bypass pulseaudio for mplayer was by putting this line in ~/.mplayer/config:

Code:
ao=alsa
Worked fine afterwards. I don't know if this affects the ability to output audio from other apps while the sound device is in use, but I don't have that situation, so this workaround suits me.

View 3 Replies View Related

Fedora :: Mplayer And Mencoder With VP8 Support?

May 20, 2010

compile mplayer & mencoder with VP8 support? also what with VP8 support in rpmfusion?

View 3 Replies View Related

General :: Mplayer: Compiled With GUI Support?

Aug 1, 2010

Kernel 2.6.21.5, Slackware 12.0 Mplayer 1.0rc2-4.1.2.

I have compiled and installed the mplayer tarball and I have disposed of both the tarball and its contents. There was the option to compile either for the physical console alone or for both this and the GUI. And I really don't remember which one I did choose.

View 7 Replies View Related

OpenSUSE Multimedia :: Mplayer Configuration - Save URLs

Jan 3, 2010

I'm not able to reproduce a configuration which I had before.

The plot: openSUSE 11.1 i586, seamonkey 1.1.18, MPlayer dev-SVN-r30099-4.3-openSUSE Linux 11.1 (i686)-Packman = MPlayer-1.0rc2_r30099-1.pm.1.1, mplayerplug-in-3.55+cvs20090923-0.pm.2.2

My old system which died in a catastrophic hardware failure did write the URLs of all movies played with mplayerplug-in to a file located at $HOME/Movies/playlist.

How can I configure the new system to do it again?

View 5 Replies View Related

OpenSUSE Multimedia :: Vlc Plays CDs And DVDs But Xine Or Mplayer Won't

Feb 23, 2010

I have recently installed openSuse 11.2/Gnome. I am having some woes. Vlc plays CDs and DVDs but Xine or Mplayer won't.

[Code]....

View 1 Replies View Related

OpenSUSE Multimedia :: Mplayer Codecs Not Working With Other Players?

Nov 5, 2010

I downloaded the mplayer essential codecs pack and extracted in directories mentioned.I even compiled mplayer and it can play now almost all the files. But I am having a problem.The problem is that other multimedia players dont play even a single file.I tried with xine,totem,kaffiene and every bundled player.

View 6 Replies View Related

OpenSUSE Multimedia :: Mplayer Quicktime Plugin For Firefox?

Mar 29, 2011

I'm trying to play quicktime (streaming) movies in firefox and therefore followed this guide: MPlayer Mozilla/Firefox plugin But it didn't succeed as i don't find the mplayer plugin in my add-ons of firefox. I placed the mplayerplug-in.so file into /home/.mozilla/plugins and /usr/lib/mozilla/plugins folder but without success.

View 7 Replies View Related

OpenSUSE Multimedia :: VLC, MPlayer Slow On Playback Of HD Files?

Apr 6, 2011

I can't seem to watch 576p or 720p files without either VLC tearing and blocking or MPlayer freezing for a few frames, or stuttering. I can't figure out why.

I have a Intel Q6600 and a GTX480 with the latest drivers on OpenSUSE 11.4. Qt 4.7.1

On VLC 1.1.8/1.2.0 I've tried X11 video out, XVideo video out and GLX video out. I've also tried enabling hardware decoding under Advanced > Inputs/Codecs > FFmpeg to no avail.

On MPlayer 0.6.9, I set my cores to 4, and and tried XVideo output and VDPAU output.

View 3 Replies View Related

Fedora :: Building Mplayer With X264 Support?

Apr 27, 2010

I'm having, namely building mplayer with x264 support. If I do ./configure on it's own it builds fine without x264, with ./configure --enable-x264 I get this with make

Code:
libavcodec/libavcodec.a(libx264.o): In function `X264_frame':
libx264.c:(.text+0x1d9): undefined reference to `x264_encoder_encode'
libavcodec/libavcodec.a(libx264.o): In function `X264_close':

[Code]....

View 6 Replies View Related

OpenSUSE Multimedia :: Error Is:"Mplayer Has Finished Unexpectedly?

May 25, 2011

I have observed a recurring problem with video files. Very often the error stated below occurs when I try to play few files, but not when playing few other videos.The error is:"Mplayer has finished unexpedtedly. Exit code: 1"How can i get rid of this recurring error.

View 9 Replies View Related

Software :: MPlayer Discrepancies - No Support For Flash Video

Nov 20, 2009

When I try mplayer with different distros, I get different results. Right now I have Kubuntu Karmic on the hard drive, but most of the time I'm running Kiara, which is a rebuild of Slax, from a live CD. With Slax, and (I believe) also with Slackware, Mplayer doesn't seem to support playing flv (flash video), or, strange to say, ogg. Now, with Karmic, I can't get full-screen video, though I can get that with most Debian-based distros, including the earlier kubuntu jaunty. Any way of closing up these gaps?

View 9 Replies View Related

Ubuntu Multimedia :: 10.10 And Lirc Remote Not Working?

Feb 1, 2011

I am running Ubuntu 10.10 and am trying to get lirc to recognize my pcusa mce remote control. I have been working on this for a week and have not had any success. Please note that I am very new to Linux. I am comfortable moving around in the terminal but most of anything else that I do in the terminal is just following instructions.

This is the remote that I am using:

[URL]

When I run

cat /proc/bus/input/devices

I do not see anything that could be the remote. I have tried plugging the USB receiver into my Ubuntu 10.10 net book but it doesn't see the receiver either. I do not have a windows machine that I can test the remote on but I plugged the receiver into my iMac and I did get a red LED lit that I haven't seen on the Ubuntu machines.

When I run irw and press buttons on the remote I see nothing on the terminal.

When I run:

sudo mode2

I get:

mode2: could not get file information for /dev/lirc
mode2: default_init(): No such file or directory

I have tried mode2 both with lirc running and stopped and I get the same response either way.

I have confirmed that there is no /dev/lirc but there is a lircd in /dev (it's not a directory). Also I had read somewhere that lirc doesn't work under Ubuntu 10.10. Is that the case?

View 9 Replies View Related

Ubuntu Multimedia :: LIRC IRSEND Not Working In 10.10

Feb 19, 2011

I have recently built a new Ubuntu 10.10 (64bit) and installed MythTV and LIRC.I have correctly (?) configured LIRC for my specific IR Blaster on the serial port. Using the test send (see below), nothing happens - ie none of the pins on the serial port change state, and hence my IR Blaster hardware does nothing.

# irsend SEND_ONCE DSTV9110 1 2 3
tail -f /var/log/syslog
Feb 15 00:56:56 MalutiPVR2 lircd-0.8.7-pre3[10127]: lircd(default) ready, using /var/run

[code]...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved