Fedora Servers :: Open LDAP Installation/Configuration Failed?
Sep 7, 2011
I am trying to configure and compile the pam_ldap and nss_ldap for MIPS architecture. for this they need ldap library. so I am trying to compile openldap code for MIPS first, but the configuration is failing.The command and options used for configuration is as follows.
./configure --host=mips CC=/opt/montavista/pro/devkit/mips/fp_be/bin/mips_fp_be-gcc LD=/opt/montavista/pro/devkit/mips/fp_be/bin/mips_fp_be-ld CFLAGS="-g -O2 -I/usr/include -I/usr/include/openssl" LDFLAGS="-L/usr/lib" --prefix=/mips/ldap --with-yielding_select=no
[code]...
View 1 Replies
ADVERTISEMENT
May 21, 2010
I've setup an openldap server, and am trying to add .ldif files to the database.
I am constantly getting the following error, no matter what I do:
View 18 Replies
View Related
Jul 27, 2010
I am trying to set up the LDAP database but it will not really work. Maybe some of you knows the answer.At this moment I get stuck at point 5: Load the LDIF data file into the database.
View 10 Replies
View Related
Aug 23, 2011
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
View 14 Replies
View Related
May 31, 2010
I'm trying to set up a Linux server and I am new to this. I have gone through most of the configuration using SAMBA 3.0 and when I populate the ldap directory all I get this error before the password request:
Then when I perform an ldapsearch to see if the directory is populated I get this message:
I'm positive all my .conf files are done right.
View 3 Replies
View Related
Aug 9, 2010
why i can't login on the ldap-client via ldap, so here is a short description of my machines (i use openvz virtualising)I have on the HN (Debian Lenny) 2 VE's, which are in the same subnet (192.168.1.0/24)The first VE (Hostname: ldap1, IP: 192.168.1.91) is the ldap-server, which is so configured, that i can manage the server via phpldapadmin.The second VE (Hostname: ftp1, IP: 192.168.1.31) is the ldap-client, there should run a sftp-server in the future and the sftp-server(ssh-server) should use ldap-usernames to login. on the ftp1, i get with this command getent passwd the users configured on the ldap-server, but with the command id USERNAME the result is, that the user doesn't exist. (USERNAME is this name, i get returned by getent) and if i try to login via ssh, i get permission denied. and because the machines are openvz-virtual-machines, so i can't login on them like on a normal system, but a su USERNAME doesn't work too, because the user is not known on the system.
my installation:
i don't think, that the ldap-server is the problem, because the phpldapadmin and getent on ftp1 are working perfectly, but if you want, i can post the config here too. the VE ftp1 was configured with the following how-to: [URL] and pam is configured like in the chapter "PAM setup with pam_ldap" on [URL]
View 3 Replies
View Related
May 31, 2010
we have a weird problem with our opensuse 11.2 server installation.
We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.
This indeed already worked weeks ago until....this week.
Maybe some updates??!
I do not know what happend exactly. The server just does not want to start again and throws following error:
Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed
This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.
So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.
I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).
View 4 Replies
View Related
May 24, 2009
I'm getting these messages Over SSH with the -D switch
Code:
At uni I did this for a couple of reasons, primarily to connect to trackers for bittorrent. I would get these messages fairly often but I never thought much of it because I figured I was just loosing packets over the network or something (understandable in my situation). At home I decided to continue to use this method because that computer is set up in DMZ and is very useful. I havn't received many of these messages but recently all my torrents stalled and I had a whole bunch of these messages. Is it possible my computer just cant handle all the network connections (it's a 2ghz AMD running debian)? What exactly do these messages mean? Is there any way to optimize my connection in any way?
View 1 Replies
View Related
Feb 1, 2010
I recently installed two PC with debian lenny (kernel 2.6.26). One is called serveur-debian1 and the second one serveur-debian2. I have installed gnome,samba, mysql5, apache2, php5, and Virtualbox,bridge-tools on them. On serveur-debian2, i installed an other virtual debian lenny with apache2,mysql5,php5,nagios and centreon on it to view my network. I remember having installed a soft to access nntp on serveur-debian2 in order to test nagios.
Since a few days, i have problem to access to my servers. rom my windows 7 client, i try to ping serveur-debian1. Response is OK but not for all resquets Always from the same computer, i try to ping serveur-debian2. Response is OK but not for all again.
When i launch a ping on serveur-debian1 and serveur debian2 at the same time i have:
ping 1 to 10: serveur-debian1: response OK
serveur-debian2: no response
ping 11to 14: serveur-debian1: no response
serveur-debian2: response OK
ping 15 to 25: serveur-debian1: respone OK
serveur-debian2: @ip serveur-debian1 network unreachable (there's no error, it shows me the ip of serveur-debian1)
If i switch on the debian virtual server on the serveur-debian2, and i ping it at the same time, the response is OK for all resquests. The problem is very strange. I can't have a correct connection and when i launch a request from a software which access the mysql server, the requests failed ...
View 4 Replies
View Related
Mar 20, 2009
How to configure ldap technology in fedora & linux.
View 3 Replies
View Related
May 29, 2009
I'm new LDAP kind of stuff.I want to configure LDAP server and Client on windowsXP. could you tell me which Open source LDAP Server and client are best fit for windowsXP. Is OpenLdap not suitable for windows?
View 8 Replies
View Related
Jun 19, 2009
I just configured my first Directory Server. I was looking to use PHPLDAPADMIN to start administrating it. Any good how to's or Tut's?
View 4 Replies
View Related
Sep 18, 2010
I am using LDAP to manage the autofs and everything works fine. I have a situation here that I can't figure out how to do. I need to use 2 direct map in auto.master, but the LDAP service doesn't allow me to add 2 "cn: /-" entries in the directory.
The following is my auto.master map:
dn: ou=auto.master,ou=autofs,ou=dolphin,dc=example,dc= com,dc=my
objectClass: automountMap
objectClass: top
ou: auto.master
dn: cn=/-,ou=auto.master,ou=autofs,ou=dolphin,dc=example,dc =com,dc=my
objectClass: automount
objectClass: top
automountInformation: ldap://ldap.example.com.my/ou=auto.iso.indirect,ou=autofs,ou=dolphin,dc=examp le,dc=com,dc=my
cn: /-
I have another ldap entry auto.data.indirect but I have no idea how to inject it into the directory. Any ideas how to implement it? I am using Fedora 13.
View 3 Replies
View Related
Aug 29, 2011
Please let me know how to delete/flush complete LDAP database ? I tried deleting all files from /var/openl dap- data. but still top level data base attributes remains.initially I had set shadowExpire,shadowFlag etc, I want to remove all these.Kindly help me to build my new database.
View 5 Replies
View Related
Sep 5, 2011
how can i access 'description' attribute stored in LDAP server from LDAP client(pam_ldap,nss_ldap).
View 2 Replies
View Related
Sep 2, 2011
I have a openldap server running on one machine (fedora10) and pam_ldap.so and nss_ldap.so running on the other machine.
I have added a new user to the LDAP server database, this user is not created on client machine.
1. Can i login to the client machine using this new user?
2. Now if i try logging with this new user I am getting error messages, the error messages are as follows at client side
Sep 2 10:34:36 localhost sshd[8484]: Invalid user kim from 10.254.194.148
Sep 2 10:34:36 localhost sshd[8485]: input_userauth_request: invalid user kim
Sep 2 10:35:16 localhost sshd[8484]: pam_ldap: error trying to bind as user "cn=min soo,ou=people,dc=samsung,dc=com" (Invalid credentials)
[Code]....
View 4 Replies
View Related
Dec 2, 2010
I've setup an Ubuntu 10.10 LDAP Client to authenticate off my LDAP server. I've install the following: sudo apt-get install libpam-ldap libnss-ldap nss-updatedb libnss-db nscd ldap-utils pam_ccreds Here's my /etc/nsswitch.conf: passwd: files ldap [NOTFOUND=return] db group: files ldap [NOTFOUND=return] db
[Code]...
View 9 Replies
View Related
Jan 6, 2010
I installed Ubuntu some days ago. It is really great, so much better then Vista But, I�ve got a small problem.When I try to install/update software, I get the following error:Quote:E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.It is very annoying, since I can�t install software now
View 3 Replies
View Related
Apr 30, 2010
I installed 9.10 on a Vista 64-bit PC with AMD64 dual core. I have 3 hard drives. 1 x partitioned in to 2 for Vista and its appluications on the other partition. I have another hard drive partitioned with one for documents and the other for Ubuntu OS. The 3rd hard drive was for future backup....
I started to install Ubuntu 10.4 with the Update Manager. It got to the stage where it had just finished downloading the new files.when suddenly, I assume as it started the install, all hell broke loose and it crashed. At first I could restart the machine and could see I had lost system info: there were no "SHUT DOWN", "Network" and other buttons and notifcation tablets on the ribbon. The Update Manage was missing bits too.
It did suggest "re try" but that would not work. I then tried Symnaptics and did a "fix broken items". It found over 90, but could not install them. Then it stopped working all together. I can not gain access. It did break Vista too but I managed to get that up and running again, but I have files on the desktop, the Evolution eMail has vast amounts of stuff and I would like to keep the settings in Firefox.. I have tried using the 9.10 CD to fix but if I go in as "trial" and use the update manager or Synaptics it can not complete the install, it says out of memory.
I am happy to reload the OS, either one, but how do I do it without destroying my valuable data..I have two machines I have been working on and neither have worked! See other thread.
View 9 Replies
View Related
Apr 29, 2011
Yesterday I tried upgrading from 10.04 to 10.10 using the upgrade manager. About half way through, my computer froze up and the only thing I could do was reboot my computer. It had already finished downloading all the upgrades and the computer froze while it was trying to install the upgrades. When I boot my computer and the Grub screen appears, I chose the Ubuntu OS (I have a dual boot system of Ubuntu and Windows XP). When it goes to boot Ubuntu, it gives me a blank screen and then a box in the right hand corner that says this:
"Install problem! The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."
Then the screen remains blank. No cursor, no mouse pointer, nothing. I have researched this error message and it is either caused by not having any free space on my hard drive or that the upgrade packages weren't installed properly. In my case, it could be both. It is definitely the packages not be installed properly but I don't know how to find out if there is no free space on the hard drive partition for Ubuntu. Some of the solutions are to use the following commands in the terminal:
sudo apt-get clean
sudo dpkg --configure -a
sudo apt-get --reinstall install ubuntu-desktop
The last command might cause me to lose previous settings, so that would be a last resort if the first two commands don't work. So my main issue is that I cannot open a terminal. My computer is set up to automatically log in. When my computer boots, I have the Grub screen which allows me to choose the Ubuntu OS, Ubuntu in recovery mode or Windows Xp. However, when I choose Ubuntu in recovery mode and select "c" for the command line, it does not recognize the "sudo" command. Same when I choose the command line in the regular Ubuntu OS. When I type "sudo apt-get clean" (without quotes), it says "Sudo command not found." I cannot find the command lines that would be the equivalent of a "sudo" command to use in recovery mode.
If you hit the TAB key while in the command line of recovery mode, if gives a list of commands but I don't see a way to open up a terminal window. For example, when I type terminal_input, it just says, Active: Console, Available: usb_keyboard." I have also tried selecting the Ubuntu OS, waiting for it to boot and then hitting Ctrl+Alt+F1 but it does not give me a log in screen. I have tried Ctrl+Alt+F2 and Ctrl+Alt+F7 and neither of those give me a log in screen either. It is just a blank screen. No cursor or mouse pointer is visible. All I want is the ability to open up the terminal so I can run "sudo apt-get clean" and "sudo dpkg --configure -a".
View 8 Replies
View Related
May 24, 2010
LDAP server failed to start.. Please check error log for problems.
View 2 Replies
View Related
Jun 24, 2010
My problem has to do with playing a mov video. It's very strange.
- In mplayer I have audio but not video appears.
- In Movie Player I have video but not audio
- In VLC I have not video and the audio is wrong (a lot of noise).
This is the output when I try to open with mplayer:
MPlayer SVN-r31061-4.4.3 (C) 2000-2010 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing 0101.mov.
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xac37bd0]max_analyze_duration reached
[lavf] Video stream found, -vid 0
[lavf] Audio stream found, -aid 1
VIDEO: [smc ] 640x480 8bpp 1.000 fps 4.2 kbps ( 0.5 kbyte/s) .....
View 14 Replies
View Related
Jun 27, 2010
I have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.
Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.
First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:
Code:
Is this a bug or can I modify anything to correct this error? How?
View 3 Replies
View Related
Mar 15, 2010
This seems to have just started. I read a .pdf document with evince and I get a whole bunch of messages like the following.GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See URL... for information. (Details - 1: Server ping error:IDL:omg org/ CORBA/COMM_FAILURE:1.0)What does this mean? why is evince trying to contact a server when I just want to read a document?
View 1 Replies
View Related
Dec 12, 2010
Full error dpkg: failed to open package info file `/var/lib/dpkg/available' for reading: Input/output error
Runing 10.10 on USB.All was fine until a week ago then when trying to update I get that error.
Ive followed instructions in many threads to no avail. Heres what ive done and the result.
sudo apt-get update No error,all download fine sudo apt-get upgrade
Preconfiguring packages ...
dpkg: failed to open package info file `/var/lib/dpkg/available' for reading: Input/output error
E: Sub-process /usr/bin/dpkg returned an error code (2)
sudo apt-get install -f
dpkg: failed to open package info file `/var/lib/dpkg/available' for reading: Input/output error
E: Sub-process /usr/bin/dpkg returned an error code (2)
[Code]...
View 9 Replies
View Related
Jan 15, 2010
I was attempting the pear installation as per the instructions given here:url
I think i got the installation correct.
Then i tried this program
<?php
require_once 'System/Folders.php';
$sf = new System_Folders();
$home = $sf->getHome();
echo "$home
";
?>
and compiled it as follows:-
php spear.php
to get the results as
Warning: require_once(System/Folders.php): failed to open stream: No such file or directory in /var/www/spear.php on line 3
Fatal error: require_once(): Failed opening required 'System/Folders.php' (include_path='.:/opt/ZendFramework/current/library:/usr/share/php5:/usr/share/pear') in /var/www/spear.php on line 3
how should i correctly set the path in /etc/php5/apache2/php.ini
or how correct is my path statement
include_path = ".:/opt/ZendFramework/current/library:/usr/share/php5:/usr/share/pear"
in /etc/php5/apache2/php.ini
View 1 Replies
View Related
Sep 29, 2009
I have pear installed, but I'n not sure I have it configured properly.
When I do a phpinfo(), no where are the settings for pear (meaning where it's located). If I recalled there is supposed to be a setting displayed there for PEAR.
View 4 Replies
View Related
Mar 24, 2010
Fedora 12
Nessus: 2.2.11-5
Authent: using passwrd
Client: GTK version
User: added with no rules
nessus-mkcrt: has been ran
Hosts.allow: hole made for localhost to nessusd with nessusd:127.0.0.1 (this took care of my ssl error)
Upon trying to log into daemon I get the cert then prompted with failed login. I am also not getting anything showing up in my logviewer (gnome). For most other daemons I have had them automagicaly pop up (denyhosts for example) how can I get nessus to show up as well.
View 1 Replies
View Related
Jul 28, 2010
I just tried to build my own samba/ldap server on opensuse 11.3 and i am continuously getting an invalid credentials error when doing the smbpasswd -a command. Below are my smb and ldap files.
smb.conf
# Primary Domain Controller smb.conf
# Global parameters
[global]
unix charset = utf8
workgroup = MERCDOMAIN
netbios name = mercserver
passdb backend =ldapsam:"ldap://mercserver.mercdomain.com"
username map = /etc/samba/smbusers
log level = 1
syslog = 0
log file = /var/log/samba/%m
max log size = 0
#name resolve order = wins bcast hosts
time server = Yes
printcap name = CUPS
add user script = /usr/sbin/smbldap-useradd -m '%u'
delete user script = /usr/sbin/smbldap-userdel '%u'
add group script = /usr/sbin/smbldap-groupadd -p '%g'
delete group script = /usr/sbin/smbldap-groupdel '%g'
add user to group script = /usr/sbin/smbldap-groupmod -m '%g' '%u'
delete user from group script = /usr/sbin/smbldap-groupmod -x '%g' '%u'
set primary group script = /usr/sbin/smbldap-usermod -g '%g' '%u'
add machine script = /usr/sbin/smbldap-useradd -w '%u'
logon script = logon.bat
logon path = \mercserverprofiles\%u
logon drive = H:
domain logons = Yes
domain master = Yes
wins support = Yes
# peformance optimization all users stored in ldap
ldapsam:trusted = yes
ldap suffix = dc=mercdomain,dc=com
ldap machine suffix = ou=Computers,ou=Users
ldap user suffix = ou=People,ou=Users
ldap group suffix = ou=Groups
ldap idmap suffix = ou=Idmap
ldap admin dn = cn=Manager,dc=mercserver,dc=com
ldap ssl = off
idmap backend = ldap://127.0.0.1
idmap uid = 10000-20000
idmap gid = 10000-20000
printer admin = root
printing = cups
# = Share Definitions =
[homes]
comment = Home Directories
valid users = %S
browseable = yes
writable = yes
create mask = 0600
directory mask = 0700
[sysvol]
path = /home/data/samba/sysvol
read only = no
[netlogon]
comment = Network Logon Service
path = /home/data/samba/sysvol/vavai.net/scripts
writeable = yes
browseable = yes
read only = no
[profiles]
path = /home/data/samba/profiles
writeable = yes
browseable = no
read only = no
create mode = 0777
directory mode = 0777
[Documents]
comment = share to test samba
path = /home/data/documents
writeable = yes
browseable = yes
read only = no
valid users = "@Domain Users"
slapd.conf
UW PICO 5.04 File: /etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
include /etc/openldap/schema/samba3.schema
modulepath /usr/lib/openldap/modules/
# moduleload back_bdb.la
pidfile /var/run/slapd/slapd.pid
argsfile /var/run/slapd/slapd.args
# Samba Primary Database mercdomain.com
database bdb
suffix "dc=mercdomain,dc=com"
directory /var/lib/ldap
rootdn "cn=Manager,dc=mercdomain,dc=com"
rootpw merc84
index entryCSN eq
index entryUUID eq
#access to attrs=userPassword,sambaLMPassword,sambaNTPassword
# by self write
# by dn="cn=Manager,dc=mercdomain,dc=com" write
# by * auth
#access to *
# by dn="cn=Manager,dc=mercdomain,dc=com" write
# by * read
# Indices to maintain
index objectClass eq
index cn pres,sub,eq
index sn pres,sub,eq
index uid pres,sub,eq
index displayName pres,sub,eq
index uidNumber eq
index gidNumber eq
index memberUID eq
index sambaSID eq
index sambaPrimaryGroupSID eq
index sambaDomainName eq
index default sub
ldap.conf
UW PICO 5.04 File: ldap.conf # LDAP Master
host mercserver.mercdomain.com
base dc=mercdomain,dc=com
binddn cn=Manager,dc=mercdomain,dc=com
bindpw merc84
bind_policy soft
pam_password exop
nss_base_passwd ou=People,ou=Users,dc=mercdomain,dc=com?one
nss_base_shadow ou=People,ou=Users,dc=mercdomain,dc=com?one
nss_base_passwd ou=Computers,ou=Users,dc=mercdomain,dc=com?one
nss_base_shadow ou=Computers,ou=Users,dc=mercdomain,dc=com?one
nss_base_group ou=Groups,dc=mercdomain,dc=com?one
ssl no
View 1 Replies
View Related
Oct 18, 2010
I have tried to install ns-allinone-2.29.....i followed the process given on the net....everything got installed properly except tcl and i got the following message tcl8.3.2 configuration failed! Exiting.... Tcl is not part of the ns project
View 3 Replies
View Related
