I installed Linphone from the repositories and got it working, apart from the video, investigation showed that there is no support for video. how to fix this before I install from source (which I have never done ) so that I can have a fully working piece of software. I am using a fully updated version of Fedora 15.
View 2 RepliesI had just installed linphone in Fedora 10 using # yum install linphone and face the following problem. I installed linphone in 2 clients via LAN and using IPv4 address, I am able to call each other. However when I changed the preference to use IPv6 in the network (the network support IPv6), I am not able to call to each other using IPv6 address.
View 6 Replies View RelatedI am trying to set up linphone for testing voip performance. Essentially I am a beginner with linux. I picked Fedora based on the recommendation of a friend. I am running Fedora 12 and I need to get linphone up and running with a working registrar. I have no idea what to do so I turned to hours of research which yielded little results but I did thing to try using partysip. I would like to know if this is a wise choice and if it is what do I do to set it up?
View 2 Replies View RelatedSo I am attempting to get linphone up and running for a research project. I am a beginner with Fedora and fairly inexperienced with computers. I was wondering if there was anyone with a vast knowledge of linphone who could help me get set up.
View 2 Replies View RelatedI had tried searching the forum for related sound help but to no avail. Thus i posted here in hope to get help.
I had been using fedora 12 since it release and been working wonderfully. Untill my last 2 update, my Voip softphone like twinkle, ekiga and linphone somehow have no sound out from speaker.
1. i can play all video and music with sound coming out from my laptop inbuilt speaker.
2. for twinkle, ekiga and linphone, there's no sound out from my laptop inbuilt speaker.That means, when i call a person, that person can hear me talking (my mic working good) but when he talk i am unable to hear him as no sound coming out from the speaker.
Note: i had call multiple different people and the result is the same.
I am on Gnome desktop with PusleAudio install and running since the releae of F12.
I have installed Fedora 10 on my laptop, but I cannot start GUI at all. Besides, I cannot get sounds, either.... lspci gives me following infos: 00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller 01:00.0 VGA compatible controller: VIA Technologies, Inc. Integrated Video my laptop is a little bit out of date, sound card and video card are integrated.
View 3 Replies View RelatedMy problem has to do with playing a mov video. It's very strange.
- In mplayer I have audio but not video appears.
- In Movie Player I have video but not audio
- In VLC I have not video and the audio is wrong (a lot of noise).
This is the output when I try to open with mplayer:
MPlayer SVN-r31061-4.4.3 (C) 2000-2010 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing 0101.mov.
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xac37bd0]max_analyze_duration reached
[lavf] Video stream found, -vid 0
[lavf] Audio stream found, -aid 1
VIDEO: [smc ] 640x480 8bpp 1.000 fps 4.2 kbps ( 0.5 kbyte/s) .....
I thought this may be of interest, so I'm sharing. I've built some experimental mplayer packages for Fedora 11 and Rawhide (x86-32 and x86-64 arches) with shiny new features. Aside from being very recent snapshots, one of them includes support for hardware video playback acceleration via VDPAU and VAAPI, and the other includes support for multi-threaded playback (so you can split the decoding load across multiple cores).
The playback acceleration can definitely be used on NVIDIA adapters (from the GeForce 8xxx series onwards) using the proprietary driver (not, unfortunately, nouveau). Also on Intel Poulsbo (GMA 500) adapters, using my packaged version of the native driver for that chipset (link is in the blog post). VDPAU acceleration is also allegedly possible on S3 Chrome 530 GT and S3 Chrome 540 GTX adapters using S3�s own driver, but I haven't had the chance to test that. Multi-threaded playback can be done on any system, but only really makes sense on those with multiple processors (cores).
Full details of where, how and why are in my blog post:[URL]..
Will Fedora 15 support this video card on laptops?
View 2 Replies View RelatedI recently installed fedora 14 on my Asus laptop with Nvidia GEForce 130m Cuda Video card. I installed the nvidia drivers, but when I go to configure any sort of visual effects in systemsettings it says Code: Your hardware cannot support visual effects due to the following problem: The problem is that it gives no problems for me to fix! How can I find out what the issue is?
View 7 Replies View RelatedI have installed Linphone 3.2.1 for linux on my Lubuntu netbook but have any clue how to configure my voipbuster settings. Have searched the internet but did not find any guidance for this version of Linphone and the documentation on the Linphone website on this subject is very poor.
View 3 Replies View RelatedI've created a GUI for my voip software wherein i'm using the source code of linphone 3.3.2 for video and all protcol stuffs . It is like i've got my own gtk GUI instead of the linphone's glade . Hope you get the picture of what i'm doing . I would like to know how to compile the source code since because i do not know about make files and stuffs . Kindly help me solve this .
View 2 Replies View RelatedI recently want to study the source code of linphone, and I should install it on my debian lenny linux first. I can install it by apt-get install linphone without any trouble. but like i said above, and I should install in by source code.well, the configure did not goes wrong, but after I typed "make", errors come to me, I know this is the error about the lib's. but i do not know which one did I miss,any one could tell me what the libs are they when I use the source code compile ????
View 3 Replies View RelatedI've been trying to view the footage I have in 1080i AVCHD on my new system but can only view it in VLC, and then only when hardware acceleration is turned off, and there's still a bit of shearing with a hexcore and a Radeon 5850.
Is there a trick to get it to play and/or preview in Mplayer/OpenShot/PiTiVi ? I've tried them all, and I can hear sound but no video. Maybe there's a system-wide way to shut off video decode acceleration.
I guess what I'm asking is, can anyone play/preview/edit in these applications with AVCHD or is it something with my new system? Everything else seems to work great. Maybe I need to try turning off compiz compositing?
Unfortunately, I bought the damn thing to do exactly this kind of video editing, and don't want to have to drop back into Win 7 to use Vegas.
i'm using pidgin 2.7.1
how do i enable video support for pidgin?, or is it on by default?? because when i click a chat room from yahoo's list of rooms(that say people have web-cams)i don't see any options to view any of the webcams.
In kubuntu, I know of a package kffmpegthumbnailer for video thumbnailing support. For Gnome on Debian, ffmpegthumbnailer is in the repos. I cannot however find kffmpegthumbnailer for my KDE Squeeze in the repos. Where is it? Or, is there a good replacement?
View 1 Replies View RelatedI just reinstalled yesterday Ubuntu on my second PC, I didn't use 2nd PC for a while so I decided it is time to refresh Ubuntu on it. I installed sopcast to watch some football games. I setup VLC as a main player, so when I past address to sopcast and start bufforing VLC turned on and I was able to watch game, after sec some small windows with error appeared sayin' "VLC probably does not support this sound or video format "wmap"" I closed this windows and noticed there is no sound... I don't know how to fix this problem it never happend before.
View 3 Replies View RelatedWhen I try mplayer with different distros, I get different results. Right now I have Kubuntu Karmic on the hard drive, but most of the time I'm running Kiara, which is a rebuild of Slax, from a live CD. With Slax, and (I believe) also with Slackware, Mplayer doesn't seem to support playing flv (flash video), or, strange to say, ogg. Now, with Karmic, I can't get full-screen video, though I can get that with most Debian-based distros, including the earlier kubuntu jaunty. Any way of closing up these gaps?
View 9 Replies View RelatedI recorded some videos on my cell phone then downloaded them to the computer. VLC will play the video but no sound. Below is the message vlc display while the video is playing.No suitable decoder module:VLC does not support the audio or video format "samr". Unfortunately there is no way for you to fix this.
View 4 Replies View RelatedWith Karmic there's some support for the ati radeon 7000 ve, but it's the default driver with limited or no 3d function. Previous distros supported radeon 7000 ve. Is it likely to expect that Lucid will not support this video card.
View 2 Replies View RelatedAt the moment the Android version of Skype doesn't support video chat at the moment, just audio.There are lots of apps in Android for video chat (Oovoo, Tango), but I can't find one that will allow me to video chat from the phone to an Ubuntu laptop.
View 2 Replies View RelatedI downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.
I have given the link of the pastebin for ./configure command and make command..
Does vaapi support the intel gm965 video card?
View 6 Replies View RelatedI'm a new Mandriva user,and have no clue about Linux system,but to be honest I don't want to use Windows product anymore. So I got the Mandriva 1 Spring Gnome,and installed it on my DELL Optiplex Desktop,works fine and very fast,therefore I decided to do the same with my Studio XPS 1640,but after I got a dark screen,so I used an external display(My TV) then realized that it doesn't support the video card on it ( ATI Radeon HD4670 ),and I don't know what to do.
View 1 Replies View RelatedI am looking for a way to make a video call from windows to linux. I do prefer over MSN or skype protocol so it would mean less trouble starting new accounts for all sides.
Now here are my problems: pidgin doesn't support video calls on msn protocol and skype doesn't support video calls over GPRS.
I like the simple looking interface on pidgin and I have a sierra wireless 880E pcmcia 3G modem. the windows side is using the WLM so no problems there.
I have downloaded latest Nvidia drivers but am not having much luck getting .run to install properly. How do I go about this?
View 2 Replies View RelatedI like this linux distribution more than the others that i have used, because is more stable for my work. But there are some little problems that I can't solve. I'm using it with a laptop HP G60 and i can run OpenOffice, Mozilla and some other programs (python, grass, qgis) that used for work at the office, but when I go home and want to watch a movie with my girl, listen some music or any other simple task, i find a lot of little problems:
1. Adjust the bright of the screen, the Power Management Guidance don't do it and I really need it.
2. Can't play movies in VLC "No suitable decoder module. VLC does not support the audio or video format XVID. Unfortunately there is no way for you to fix this"
3. And today I can't play music because there is a message "KDE detected that one or more internal sound devices were removed" this is: Output HDA Intel, INTEL HDMI 0 (HDMI Audio Output)
I know maybe these problems are stupid but in windows is easier to fix them. I'm tired of search in google because i just find solved problems for Ubuntu and it takes a lot of time.
I am in the process of building a new desktop machine for work and fun. I am looking to run a undecided flavor of Linux (guessing Ubuntu) as my primary OS and several Windows installs with a Windows 7 install for .net development and gaming as virtualized environments.
From my previous experiences with virtualization software in Linux I was never able to find an application that offered descent video card support / graphic acceleration etc. to be capable of playing any games within one of the virtualized environments. And since I will be investing quite a bit of money into this system for gaming I would naturally want to find the best option available to achieve this setup.
So Onto my question: Is there any virtualization software available for Linux that has full video card support, graphic acceleration and capable of taking advantage of everything the video cards have to offer within the virtualized environments?
Or am I stuck with running Windows 7 as my primary OS and using virtualization for Linux and the other OS's?
Also I have no preference on open/closed source and price range would be up to $175.00 to support at least 3 virtualized environments.
After some update this morning, I can't play any video in Karmic. I've been using VLC for everything, now there is no video, only sound with the error message: p, li { white-space: pre-wrap; } No suitable decoder module: VLC does not support the audio or video format "h264". Unfortunately there is no way for you to fix this. Totem: "Can't play a text file without video."
View 1 Replies View Relatedwhenever im trying to play a movie in vlc,a window is being popped up wih the following message.No suitable decoder module: VLC does not support the audio or video format "h264". Unfortunately there is no way for you to fix this.
View 4 Replies View Related