Fedora :: Gnome 3 Doesn't Start No Login
Jul 30, 2011
When I boot my Fedora 15 installation it shows me the blue screen with progress indicator, however I do not reach the login screen.Instead I see the textual shell where the last item is:Started Display Manager.It looks like my monitors are not detected anymore. I have been working with them though (this appeared after a restart). I am not sure how I determined it but I read in some log that no display was detected. Nothing changed to the hardware set up however.I see some suggestions to run system-config-display as root.However this command can not be found nor can it be found when I run yum install system-config-display.
View 1 Replies
ADVERTISEMENT
Mar 16, 2010
Every time I start Ubuntu, I set up an ssh session to a server. In order to automate this I made an entry in startup programs like this:/usr/bin/gnome-terminal -e '/usr/bin/ssh name@server.com'Nothing happens when I log in, and I've checked that the command works.
View 2 Replies
View Related
Sep 5, 2010
I installed avant-window-navigator and followed these instructions to remove gnome-panel from startup: URL...However I have since uninstalled AWN and now cannot get gnome-panel to load at startup.I think I have put my settings back where they should be -- looking at them in gconf-editor:
1. desktop > gnome > session, the required_components_list is [windowmanager,filemanager,panel]
2. desktop > gnome > session > required_components_list, the panel value is "gnome-panel"
Yet gnome-panel does not load at startup. Any ideas why?Clarification: I can get gnome-panel to load by listing it under Startup Applications, but I am curious why it won't load via the gconf settings.
View 9 Replies
View Related
Oct 15, 2009
Does anyone know a secure method for starting a service after a user logs in to the desktop environment? There are a couple of issues that I'm trying to work around / troubleshoot and this would assist with doing that.
I'm running Fedora 11, not sure if that matters for this question.
View 14 Replies
View Related
Jul 28, 2010
I just installed Fedora 13 on a new computer and the timed login for gnome does not work unless you manually select it. This surprised me as I upgraded a separate computer to Fedora 13 and the timed login feature still correctly functions and does not require user interaction.
Code:
[daemon]
TimedLoginEnable=true
TimedLogin=<username>
TimedLoginDelay=3
Adding the above to /etc/gdm/custom.conf only adds an Automatic Login option that you have to manually select and then the computer will login. I would deem this less than useful.
Code:
[daemon]
AutomaticLoginEnable=true
AutomaticLogin=<username>
I know you can substitute the timed login with the automatic login and it will instantly login, but this provides no option to select another user. I have been unable to find any information why this feature no longer works and wanted to know if there is a new way or if anyone knows why the timed login feature was crippled.
View 1 Replies
View Related
Mar 16, 2011
I have dell d630- 64bit version So i upgraded to the latest alpha and my system gets stuck at: as far as "Checking battery state" and hangs, i can login to the separate console and run startx but then no window manager is comming up so again, another ubuntu upgrade and another failure
View 2 Replies
View Related
Jun 10, 2010
I use ubuntu 10.04 in VirtualBox (upgrated from 09.10), host os is Win7.
3-4 days ago update of ubuntu required restart of Ubuntu (linux kernel was updated).
After 3 days (i.e. yesterday) I restarted the system. I found that flashlib in Chrome became to work unstable, some artefact appeared, and only scrolling down-up in browser allowed to update view of screen. I run update manager. It showed ~88Mb of updates for last 3 days.
After download of updates, apply changes was failed! I faced this first time (!). I remember message like "can not synchronize file /usr/share/..." or something like that.
I restarted ubuntu again. Now I could not login. System hangs after login. No Gnome menu appears etc.
I tried to fix issue using dpkg. I found that some lib (ure) related to OpenOffice was not assigned (version XXX required, but bersion XXXY found). dpkg offered to solve this by some combination. I did so. Then I run dpkg update, and no errors appeared.
Also I updated VirtualBox to version 3.2.4, updated VirualBox Additions via console terminal in ubuntu.
But still I can't fix problem with gdm/gnome.
dpkg-reconfigure gnome-*** did not help for me.
I tried to check logs, but I have not found something "interesting".
At the moment terminal is the only way to login.
View 4 Replies
View Related
Jun 6, 2010
I've scheduled a task in gnome-schedule to run at each reboot. When I click on "preview task" it initiates a one-time run just fine. However, after reboot it just doesn't want to start the task.
View 3 Replies
View Related
Jan 8, 2011
I forced a quick restart with 'sudo shutdown -f now' and when logged back in gnome-panel doesn't start at all. I can right-click on the desktop & run terminal from there, so I'm running web browser from terminal. I tried 'sudo killall gnome-panel' & got 'no process found' I tried doing a full restart, still the same.
I tried running gnome-panel from the terminal.
'gnome-panel' gives me my panel after a 4 or 5 second delay. If I exit the terminal or Ctrl-C I lose the panel again.
'sudo gnome-panel' gives me what appears to be the panel for the root user.
View 3 Replies
View Related
Jul 31, 2010
When I get to the login screen on my computer (with ubuntu-desktop, kubuntu-desktop, and xubuntu-desktop installed on Ubuntu), Gnome isn't in the list of desktop environments!
My temporary solution:
I have Openbox/Gnome. I also have an icon in my panel that opens "compiz --replace" so I can still use the regular WM with compiz.
Why my temporary solution isn't good enough:
It's annoying to have to have an extra icon in my panel, and to have to press it at login. Also, I don't get the Compiz splash screen when I login. Overall it's just not as impressive.
Is there any way to get Gnome back in the menu?
View 4 Replies
View Related
Mar 22, 2010
I want to have an ls' output colorization in gnu screen. Colorization in my system (Slackware 13) is realized by aliasing of ls in /etc/profile.d/coreutils-dircolors.sh:
Code:
$ alias ls
alias ls='/bin/ls $LS_OPTIONS'
where $LS_OPTIONS is
Code:
$ echo $LS_OPTIONS
-F -T 0 --color=auto
But in screen this alias isn't defined. It seems like /etc/profile script isn't executed at shell starting in screen. I think it happens because screen starts a shell not as a login shell. I tried to correct it by adding to ~/.screenrc or to /etc/screenrc. The problem is the same. By the way when I start screen as a root I haven't this problem. What's wrong?
View 3 Replies
View Related
Oct 6, 2015
Today I upgraded my system to the Nvidia driver 340.93 and 4.2.0-1 kernel on Debian Stretch.
While I wait for the gnome login screen to pop up I get the "Oh no something has gone wrong" message.
When I log in from another terminal and execute startx , gnome initiates and starts although settings like my resolution and other xserver settings are not loaded.
From the journalctl I believe the error is located in the following section:
Code: Select allOct 06 14:23:17 DEBIAN-PC org.a11y.atspi.Registry[1692]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Oct 06 14:23:17 DEBIAN-PC gnome-session[1680]: X Error of failed request:Â BadValue (integer parameter out of range for operation)
Oct 06 14:23:17 DEBIAN-PC gnome-session[1680]: Major opcode of failed request:Â 154 (GLX)
[Code] ....
I reinstalled the xorg-xserver and the nvidia drivers and I get the same behavior.
Looking for some info in order to reconfigure the gnome-session to work?
View 12 Replies
View Related
Jan 13, 2011
i installed debian cd 1 on a school's computer however, some administration tools are missing (like add/remove programs...) , i tried to install the full gnome but the installation doesn't start
Pmaison:/home/pmaison# aptitude install gnome Lecture des listes de paquets... Fait Construction de l'arbre des d©pendances Lecture des informations d'tat... Fait Lecture de l'information d'©tat ©tendu nitialisation de l'tat des paquets... Fait Lecture des descriptions de tches... Fait Pas de version candidate trouve pour gnome....
View 5 Replies
View Related
Feb 5, 2010
It happens like 50% of my Suse 11.2 startups, when I type in my password at login screen and hit enter, Gnome do not start, i can only see the green blank screen,or sometimes it start to show only my custom wallpaper and nothing more, when i try ctrl+alt+backspacex2 and login again everything seems to work fine, but what could be wrong ? is it a hardware issue ? Moreover, sometimes when I want to shutdown my laptop and click the shutdown button, suse do logout, but instead of turning off the laptop , it brings me to login screen, clicking the shutdown button at login screen makes my hdd lamp blink and thats all.
View 6 Replies
View Related
Feb 15, 2010
My computer was working this morning and both hard drives were working fine, then all of a sudden for about two hours I was stuck with this "problem", then after fumbling and moving and stablizing things, then Windows works? See below for details. I've finally reinstalled both hard drives, but the one with the Linux partition doesn't work: it says nothing is discovered on the disk. I can't login at the LUKS login after grub starts, therefore I can't get into Linux, but Windows works?! I used to be able to go directly into Grub when the computer starts, I forgot how to do that but it doesn't matter. If you need details I'd be glad to provide them. I just wondered why Linux doesn't work, but Windows does. I have Linux & Windows on two different separate hard drives
View 5 Replies
View Related
Feb 23, 2011
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left, I see the following error message:
"Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround.
View 9 Replies
View Related
May 14, 2010
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
View 4 Replies
View Related
Nov 21, 2010
I just added "export PATH=.:'printevn PATH'" to ~/.bashrc, then i can't use any commands, like "vim" or 'ls', it shows 'command not found'.
I cound't figure it out why. Then I logged out and tried to login. Another more serious problem occurred. after I type in login id and pass, it shows login seems to be right, but it doesn't login normally, but immediately bring me back to the login dialog box, and ask me to type log info again. I tried many times, it just constantly brought me back to the login page.
View 14 Replies
View Related
May 27, 2011
i want make an ad hoc host in Gnome 3. I set everything in Network Connections, but I don't know how to start it. In Gnome2 it was enough to click on icon of NetworkManager and i saw it there. But now, I'm lost.
View 3 Replies
View Related
Feb 7, 2010
When I am at the login manager and enter the password and user and select KDE then the login manager just reloads itself and nothing happens.But when I select gnome, then I can login and everything works.I can start kde while logged in in gnome with "startkde", but then i have both desktop environments running
View 10 Replies
View Related
Jul 27, 2011
LibreOffice 3.4 shows up as installed and in my applications menu, but when I try to open it (either through the menu or by opening a file) it shows up with the spinning thing in the task bar but then disappears and never opens.
Did I forget to install part of it?
View 1 Replies
View Related
Nov 23, 2009
The upgrade from 11->12 went very smoothly for me on multiple servers except for one seemingly small item that had me tearing my hair out for a few hours. Three of my machines are MythTV frontends, which rarely do anything else. As such, I have them fairly stripped down package-wise and run MythTV on GNOME with xorg-x11-xinit-session to kick it off via an .xsession script. This scheme has worked flawlessly for years across many versions of Fedora until last week when MythTV mysteriously would not start and the computer would just get stuck in an automatic login loop. I discovered that I could start MythTV after I logged into the GNOME desktop and through some testing and log inspection came to realize that it was PulseAudio that was not starting automatically. I also discovered that I could just SSH in while it was in this loop and issue 'pulseaudio -D' and the next automatic login attempt would start MythTV properly.
As a quick hack, I just tossed 'pulseaudio -D;sleep 3' into my .xsession script and it seems to be working for now. I am interested to know how it used to start up without logging into the desktop before the upgrade. Could this possibly be related to udev or dbus? I have practically no knowledge of those, but do see config files for both in the pulseaudio package.
View 1 Replies
View Related
Jun 4, 2011
Starting gnome-sudoku (after installing the packages gnome-games and gnome-games-extra) only results in the following message in my messages log :
Code:
gnome-sudoku: abrt: detected unhandled Python exception in /usr/local/bin/gnome-sudoku
Is there any way to fix this?
View 1 Replies
View Related
Jan 24, 2010
Intermittently I seem to have no panels when I login to Gnome on my F12 install.I can fix it by "pkill -USR1 gnome-panel", but there's got to be a root cause for it.I've found loads of results on Google, but no solutions, mostly Ubuntu users (you never seem to get solutions from Ubuntu users!)
View 11 Replies
View Related
Sep 24, 2010
I have a problem concerning about NIS. I have set-up a NIS client, but I am not able to login as NIS-user by using GNOME or KDE login GUI. However, I was able to login as NIS-user by using a terminal that's open from a local account or root. Also the NFS seems working as well. This problem only occur on my new FC13 pc, and I don't have this problem on my FC10 pc. Both of my FC13 and FC10 PC have the same NFS and NIS setting.
View 8 Replies
View Related
Dec 4, 2010
I've just installed F14 64bit on my desktop and I tried to run Open Office Writer. As a result, GNOME crashed and the rendering of the desktop was messed up. I had to force a reboot, and now everytime I login the Open Office recover dialog causes a crash again. I suppose it has something to do with the opensource nvdia drivers and OO.o's toolkit but I can't look at it with the crash-on-login thingy there (I suppose I can install the closed source drivers from a tty now that I am thinking it again....)
---------- Post added at 07:27 PM ---------- Previous post was at 07:24 PM ----------
Uh... actually I can't install the closed source drivers. Yum finds no mirrors for rpmfusion >(
...or the Fedora repos :
View 1 Replies
View Related
Jun 24, 2011
To get my external display working on my laptop I need to run these commands after logging into gnome. I've tried .xprofile, .xsession and .Xsession and none of them seem to run. I also tried putting it in /etc/X11/xinit/xinitrc.d/ however it didn't seem to respect the last command to set the external monitor as my primary output.
Code:
#!/bin/bash
xrandr --newmode "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
xrandr --addmode VGA-1 1440x900_60.00
[code]....
View 5 Replies
View Related
May 30, 2009
I can view my website, and ssh in when I've logged in already at home, but if the system gets rebooted, and gets as far as the login screen, I am not able to view the web site or ssh in. I was wondering how to set things up so thatthese services are running independent of logging in.
View 14 Replies
View Related
Sep 30, 2009
I just installed FC11 yesterday and I can login on terminal window usingu and root password no problem. However if I try to login atachine startup screen as root and password it tells me denied password.
View 4 Replies
View Related
Sep 16, 2010
How would I get the SSH server to start before I've logged in?Basically, the problem I have is that if I'm connecedt to my computer remotely over SSH, and reboot the machine, I'm not able to SSH back in after it restarts. As far as I can tell, this is because the SSH server doesn't automatically start up until after I've logged in for the first time.How would I get around that? Surely that is a fairly common scenario for network admins (especially ones who have keyboardless and monitorless machines running).
View 13 Replies
View Related