Debian Multimedia :: LibreOffice Crashes On Start-up
Sep 1, 2015
I installed libreoffice from the official Debian repository. Even after a clean installation of Debian Jessie, Libreoffice started and ran only once. After that, when LO was started, it gave an error message: "Gtk-Message: Failed to load module "canberra-gtk-module".I installed "canberra-gtk-module." From then on, LO never gave any error message in terminal. The banner flashes across the screen for a moment and then disappears.
I deleted ~/.config/libreoffice folder and started LO again. Each time the command "libreoffice" is run in terminal, it creates the configuration files in ~/.config folder.I created a new user to check if LO would run. It does run when a new user account is created. But the problem keeps coming back.
After uninstalling libreoffice, I tried installing openoffice 4. Even openoffice 4 wouldn't start. The banner would just appear for a moment.
When I try to start korganizer from a konsole, I get the following error reply and kontact crashes
<unknown program name>(24450)/: KUniqueApplication: Cannot find the D-Bus session server: "Did not receive a reply. Possible causes include: the remote application did not send a reply,the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." <unknown program name>(24445)/: KUniqueApplication: Pipe closed unexpectedly.
In my newbie mind - there is something wrong with d-bus or similar. I can however start kmail and KAddressBook without problems. The crash of kontact/korganizer first showed up under my (up-to-date) Squeeze system. I then upgraded to "testing" but the situation is the same. I have filed Bug 274661 with the KDE bug tracking system. So far - no answer........
I want to use LibreOffice but I keep getting an error every time I try to open any office application.
The error is : The application cannot be started. [context="bundled"] caught unexpected exception!
I installed the .debs the first time and thought it might be wiser to install it from the experimental repos.So I reinstalled but there's no difference,I keep getting the error.
I reinstalled and found that the same error is caused by the installation for the dictionaries.I removed those but the error is still present.
I've seen people post this error on some forums except context=user and not bundle.However,it seems those were Windows 7 machines and that it's a 64 bit bug.
I'm also running the 64 bit version.
Also,if I try to install the desktop-integration .debs I get another error ( that is,if I remove the dictionaries,otherwise the installation runs just fine ) :
I'm trying to install Libre Office by using the installation instructions on: [URL].. It goes wrong when i have to decompress the .tar file. I get this message: tar: This does not look like a tar archive tar: Skipping to next header tar: Exiting with failure status due to previous errors
VLC had been working well, but after some updates, it crashes after trying to start. When starting from the menu, it puts a slot in the taskbar and has the bouncing pylon for a few seconds, then those disappear. When starting in console, it immediately returns"VLC media player 1.1.7 The Luggage (revision exported) Floating point exception".VLC starts correctly from console with "strace vlc".I deleted the configuration files "vlc-qt-interface.conf" and "vlcrc" in ~/.config/vlc/, but this made no difference when trying to start VLC.
The system is OpenSuSE 11.3, 32 bit; KDE 4.4.4 release 3; NVIDIA 260.19.29.The problem exists with both VLC versions 1.1.7-1.pm.2.2 from Packman, and 1.1.7-3.1 from Videolan.I suspect this is similar to an Amarok problem described at Amarok Keep Crash and Amarok opens and crashes immediately
I am getting mad about 10.10. Nothing is working as it should work!
Sound... Ok, system sounds is working. Amarok is working. But it doesn't work in VLC, flash, etc. GNOME: works, but only starts working, when sound is changed.
(No idea, but KCMInit always crashes at start (segm fault)).
An unhandled exception was thrown: Sqlite error 14: unable to open database file (SQL: BEGIN TRANSACTION; DELETE FROM CoreSmartPlaylistEntries WHERE SmartPlaylistID IN (SELECT SmartPlaylistID FROM
I have installed mythbuntu 10.04. It worked well for a few days. Now my frontend does not start or crashes just after booting. You can see the frontend background for a few seconds but the menu does not load. After that, the mythtv window disappears and you can see the ubuntu desktop. Here are the last few lines from the log file:
2010-06-07 07:32:49.622 MythContext: Connecting to backend server: 127.0.0.1:6543 (try 1 of 1) 2010-06-07 07:32:49.623 Using protocol version 56 mount: can't find /dev/sdb in /etc/fstab or /etc/mtab
LibreOffice 3.4 shows up as installed and in my applications menu, but when I try to open it (either through the menu or by opening a file) it shows up with the spinning thing in the task bar but then disappears and never opens.
I've just installed Squeeze 6.01a from the xfce iso image on an old PIII which has been running Lenny with xfce without any problems. It's a fresh install after a reformat.
Sounds and multimedia apps like gxine and mplayer all worked fine on Lenny and other older versions. Now they don't - not gxine, not mplayer not even VLC. Run from the menu they all abort - and if run in an xterm they all crash with the following message -
Assertion 'pthread_mutex_unlock(&m->mutex) == 0' failed at pulsecore/mutex-posix.c:108, function pa_mutex_unlock(). Aborting.
I am new to debian. I run debian on a laptop with nvidia geforce chip 740 m (optimus), it has been working great until today when i turned it on , the start screen did not show up and it went straight to terminal mode. Starting the kdm service manually does not do anything.
KDM starts up fine, graphics drivers (fglrx) are loaded correctly, but as soon as I login over KDM and KDE desktop starts loading, X crashes, restarts KDM, and I get sent back to the login screen.I am running a stock debian/lenny install (with 2.6.26-686 kernel) and no error messages in my Xorg.0.log.
when I mount DVD-ROM to some files from xterm, the systerm never responsed! I used this command: sudo mount -t iso9660 /dev/cdrom /mnt/cd I search some info from google ,some guys say these info may help ,but I don't understand why it cab be crashed when I mount the CD from DVD-ROM.
/etc/fstab /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0 lrwxrwxrwx 1 root root 3 05-22 19:54 /dev/dvd -> sr dmesg |grep hd [ 9.126848] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS.
Suse 11.3 KDE 32bit Following instructions in software.opensuse.org: Search Results I installed LibreOffice using the 1-click Install method. It will not start and produces no error when invoked from the console. Now here's the strangest part. If I left click on an .ods file produced by LibreOffice on another computer (on which it worked) KDE tries to extract it using ark even though file properties identifies it as an "ODS spreadsheet".
I was using Debian (jessie) testing for quit a while now, and since jessie is now the new Stable I wanted to update to testing again.
And I have an issue now, and I can't tell if it is a really a bug, or some new packages are interfering with my configuration files. Well to be honest I have more than one issue, but I am guessing that at least a few of them are related to the same issue.
Whenever I startup my Debian(testing) system, I get the gdm3 login prompt, I type in my password and hit Enter. Than there is a: “Oh no, something went wrong”-window for an blink of an eye (1-2 seconds).
After that gnome starts (almost*) normal .[gnome version 3.16.2]
*But: the gnome-sound applet doesn't start correctly. Alsamixer is running but Pulseaudio seems not to. When I start Pulseaudio manually after that everything with the sound is fine.
The most annoying thing is, that none of my Shortcuts work anymore ( Ctrl+Alt+T for terminal, Ctrl+<anything; Fn+<anything> screen brightness for example; hardware Volume Up/Down keys [Thinkpad x230t])
I checked my costume Shortcuts, Ctrl+Alt+T is set in the keyboard settings.
I have two monitors connected (its a laptop so it the build in and an external). I tried to disconnect the 2nd monitor and restartet the problem persists . Everything else seems to work fine (at least I haven't found any other issue yet). I would be glad to add some Log files, but I don't know exactly which one I should attach.
I attached the Xorg-log since it seems to me that something went wrong there:
115.284] (WW) Falling back to old probe method for vesa [ 115.284] (EE) intel(0): [drm] failed to set drm interface version. [ 115.284] (EE) intel(0): Failed to become DRM master. [ 115.284] (II) UnloadModule: "intel" [ 115.284] (EE) Screen(s) found, but none have a usable configuration.
I'm running Wheezy and just did an apt-get upgrade which installed linux-3.2.0-4-amd64, a bunch of php5 stuff and some qemu stuff. Now when I log into the desktop it starts loading and before it finishes I wind up with a screen full of text. The first line is usually "BUG: unable to handle kernel paging request at <some address that varies>" but sometimes the first line is off the screen. None of KDE, Gnome or xfce work. Recovery mode to a shell prompt works fine. I did a net install of Wheezy on another disk and that runs just fine. I'd like to get my original disk working.
My supposedly stable system was crashing. The problem was one or more specific screensavers--xscreensaver, the display manager (lightDM), and X itself are innocent as far as I can tell.
I'm on a Thinkpad T400 with Debian Jessie (8.4)/MATE/lightDM. I have libreboot and not proprietary BIOS. I like variety, so in addition to installing xscreensaver itself (the unofficial patched jessie version without the "out of date" nag, which I got from https://angband.pl/debian/pool/main/x/xscreensaver/), I also installed some extras from the official repository (xscreensaver-gl-extra, xscreensaver-data-extra, xscreensaver-screensaver-bsod). I enabled all the installed screensavers and asked xscreensaver to randomly cycle through them.
To my dismay, after variable lengths of time (usually within 20-60 minutes), when a random screensaver has been on for a little while (I'm guessing as it's about to go to the next random one), X crashes to a black screen. The only way to make the black screen go away is to kill X (which I mapped to Control + Alt + Backspace) then log back in. There are no useful logs anywhere except some cryptic IO error 11 entry in ~/.xsessionerros.
Now for the troubleshooting:
1) First I tried installing a more up-to-date version of xscreensaver (5.34-2), which I grabbed from the sid repository. This didn't work--same problem as described above. Therefore, I went back to the patched version for jessie (5.30-1 from angband.pl).
2) To exclude that the lightDM middleman was the problem, I disabled it and was logging in with startx. Problem did not go away. (I then rigged systemd to log me in automatically and for startx to run automatically once I'm logged in--who needs middlemen?)
3) To exclude screensavers butting heads, I uninstalled mate-screensaver and disabled anything from X that could be interfering (by running these commands in a startup script: xset -dpms; xset s 0 0; xset s noblank; xset s off). Problem did not go away. I kept this startup script nevertheless.
4) Finally, to exclude individual xscreensaver module(s) being the problem, I unchecked them all. Then I wrote down the names of my 20 favorite modules (which include some from gl-extra, some from data-extra, and bsod) and tested them in small batches, running xscreensaver with only 5 favorites checked at a time. After testing four batches of 5 and witnessing all 20 favorites both display and load without any X crashes, I went ahead and selected all 20 favorites. I left the laptop on overnight and in the morning (about 12 hours later) it's still going strong.
One or more particular xscreensaver modules are crashing X, probably at the time they are being loaded to be the next one to show. I think I already spent enough time on this, so don't really care to identify +/- troubleshoot the offending modules.
Recently pcmanfm crashes more frequently then before. Each time it occurs, I cannot open another instance of it until I reboot my desktop/laptop. But this is not possible if I happen to be doing some long computational work. I have been using it with fluxbox for two years already, and previously I simply reopen another new window and get on with my work.
I installed Squeeze on an eeepc 900.Everything seems to work well, except for one thing: iceweasel, when drawing certain windows, likes to crash the entire KDE session. This is 100% replicable simply by right-clicking on a bookmark put on the bookmarks menu toolbar, and trying to go to "properites" on that item. It only does this, however, on my wife's eeepc 900, it does not happen on my 900A (different gpu and cpu though...). the two systems have the same packages installed.
The most frustrating thing is that there is no error output whatsoever. I have looked through all the logs in /var/log, and I couldn't find anything. I have run iceweasel from the command line and redirected its output to a file, but the whole system hard-locked, and when I rebooted, there was no log file. I have started X using "startx" instead of using kdm, and I cannot see any output to the VT that kicked it off because the system hard-locks.
As far as I can see, it only happens in iceweasel. If I disable compositing, it becomes stable again -- but I don't want to have to do this, as it interferes with features she is accustomed to.Oh yes, I should also add that this netbook worked fine under eeebuntu and compiz -- never an issue.
I'm running Jessie on an AMD64 with an ATI Radeon HD 7770 card. I have installed the fglrx driver. When I try to play a movie with vlc, it crashes with the following error:
I've freshly installed Debian Lenny 5.03 with xfce from cd, but I'm having intermittent problems with X. Mostly X will startup fine, but occasionally it crashes. If I'm lucky, it will just shutdown and just return me to the text-mode login. But if I'm unlucky, it freezes completely, such that even the alt-SysRq key combos won't work.
where I'm using a default xorg.conf file of... [URL]
and the respective Xorg.0.log files are
a) for when xorg runs okay... http://pastebin.com/h0rbti1U b) for when xorg crashes to textmode... http://pastebin.com/f7B6SgKf c) for when xorg freezes up completely... http://pastebin.com/gydNkJFf
Previous X was 1.4.2. After aptitude upgraded X Window to 1.7.7, startx crashed complaining: XKB could not find /usr/share/../rules/evdev file. There is no evdev file.
How do I modify xorg.conf to work with evdev? I spent few hours to figure out evdev. It seems it's new style of managing input devices in X Window. The information isn't friendly to migrate from old to this.
When I put Option "AutoAddDevices" "off" in ServerLayout section, it literally froze X Window. X started without mouse/keyboard control. I had to turn off power switch. Now, I can't use X at all unless I move back to 1.4.2.
I have been trying to play this game dawn-rpg.sourceforge.net and it immediately crashes whenever I try to play sounds. The only other sound in this system I have are the sounds for the bash/dash terminal.
So my questions are:-
a. How do I test if the sound system is working alright. b. Do I need to increase some kind of priorty/niceness to sound systems to make sure they get the available resources (cpu, memory ) whatever it needs ?
On the same topic, while I was searching on the Net I got this link http://rosegardenmusic.com/wiki/low-latency_kernels .
I know this is actually for people who want to make sounds/music but can some of these ideas/instructions be useful for me as well ?
my Iceweasel always crashes when I attempt to open any file (usually pdfs, but I tried with .odt too). I only found this thread [URL] .... and commented out as told by MekkaGodzilla in /etc/gnome-vfs-2.0/modules/default-modules.conf Coment out this line : file:file
I've just installed brand new Debian 6 on an oldish Dell Inspiron 5160 laptop. This features an XGI Volari XP5 video card, which I can see reported in /var/log/Xorg.0.log.
When Debian boots it will only run in command line mode. Running startx hangs up the whole system and just displays a black screen with a few vertical stripes in different colours of dark green.
the default vesa driver for X.org doesn't play very well with the XGI video card.
I've tried running X -configure then X -config /root/xorg.conf.new
This correctly detects the XGI Volari XP5 card (if you look through the xorg.conf) but running the second X command still hangs up the system.
X runs fine under Knoppix, but most recent Ubuntu distros I've tried actually hung up after the initial text-based startup section, so presumably died as soon as X started up. Debian's graphical installer worked fine, however.
After recent update (yesterday) Evolution became almost unusable: if I am going to create a new e-mail or just select a person from Contacts or reply to someone it simply crashes. The update also didn't go very smooth - 15 updates were not applied because of a broken dependency - evolution-exchange, which depended on evolution prior to 2.30.0 but 2.30.1.2-2 was to be installed. Is there a way to make Evolution to work or upgrade solving dependencies?
