Debian :: LibreOffice Start Error - The Application Cannot Be Started
Jan 27, 2011
I want to use LibreOffice but I keep getting an error every time I try to open any office application.
The error is : The application cannot be started. [context="bundled"] caught unexpected exception!
I installed the .debs the first time and thought it might be wiser to install it from the experimental repos.So I reinstalled but there's no difference,I keep getting the error.
I reinstalled and found that the same error is caused by the installation for the dictionaries.I removed those but the error is still present.
I've seen people post this error on some forums except context=user and not bundle.However,it seems those were Windows 7 machines and that it's a 64 bit bug.
I'm also running the 64 bit version.
Also,if I try to install the desktop-integration .debs I get another error ( that is,if I remove the dictionaries,otherwise the installation runs just fine ) :
View 7 Replies
ADVERTISEMENT
May 4, 2011
Suse 11.3 KDE 32bit Following instructions in software.opensuse.org: Search Results I installed LibreOffice using the 1-click Install method. It will not start and produces no error when invoked from the console. Now here's the strangest part. If I left click on an .ods file produced by LibreOffice on another computer (on which it worked) KDE tries to extract it using ark even though file properties identifies it as an "ODS spreadsheet".
View 5 Replies
View Related
Sep 1, 2015
I installed libreoffice from the official Debian repository. Even after a clean installation of Debian Jessie, Libreoffice started and ran only once. After that, when LO was started, it gave an error message: "Gtk-Message: Failed to load module "canberra-gtk-module".I installed "canberra-gtk-module." From then on, LO never gave any error message in terminal. The banner flashes across the screen for a moment and then disappears.
I deleted ~/.config/libreoffice folder and started LO again. Each time the command "libreoffice" is run in terminal, it creates the configuration files in ~/.config folder.I created a new user to check if LO would run. It does run when a new user account is created. But the problem keeps coming back.
After uninstalling libreoffice, I tried installing openoffice 4. Even openoffice 4 wouldn't start. The banner would just appear for a moment.
View 8 Replies
View Related
Aug 13, 2011
i have installed Fedora 15 from USB and it error
Quote:
GNOME 3 Failed to Load
Unfortunately GNOME 3 failed to start properly and started in the fallback mode.This most likely means your system (graphics hardware or driver) is not capable of delivering the full GNOME 3 experience.
.The interface is now Gnome 2. I have not change screen resolution 1280�720, now is 1024x768.
Result of xrandr -q
Quote:
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 0.0*
View 1 Replies
View Related
Mar 15, 2011
I'm having a very strange problem with red hat cluster. After testing it in the lab, I tried to install a new cluster and received the following error: cman not started: Cannot start, cluster name is too long or other CCS error /usr/sbin/cman_tool: aisexec daemon didn't start I've checked the internet for that error, but nothing. I decided to to take the example from cluster.conf man, which looks like that :
[Code]...
And still I get the same error. I can find my servers both from DNS (FQDN and short name) and they also appear in /etc/hosts.
View 3 Replies
View Related
Sep 29, 2009
I'm trying to get an application started, but it just keeps throwing this error:
I know it's a Perl Error and the proper module is installed, but I'm assuming it just can't find it.
View 3 Replies
View Related
Sep 16, 2010
why, every time I started gnome, update-manager show me the error icon?seems like there are errors but if I lunch apt-get update or aptitude update it works great.
View 10 Replies
View Related
Nov 14, 2010
I have problem regarding when a application is started from the menu-line. If I for example start wxmaxima though Menu -> Science -> Wxmaxima, then the menu-bar is gone. I can access the menu-bar by pressing F10, but the menubar never shows up!
I have the same experience with emacs 23, where the menu-bar starts as it should, but whenever I change major (or minor) mode, the new menu-item appears, but I cannot access the menu-item (it is just blank). As before, whenever I go though F10 the menuitem shows up as it should.
Same goes for eclipse.
Instead of starting the applications though the Menu -> ..., I tried to start them in the terminal instead. Then the applications do not suffer from this menubar behaviour.
View 1 Replies
View Related
Jun 27, 2011
I want to use myscript.sh to auto-start an application. I put myscript.sh into /etc/init.d/ and run "update-rc.d myscript.sh defaults". After reboot, I can see my application was started (its log file was updated), but I cannot see my application running if I do ps -ef. I suspect it is killed by the OS.
View 4 Replies
View Related
Sep 25, 2015
I am new to this debian plotform. How can I add my app to init.d linkup.
I did my programe for I2C Bit banging method and got output on Beaglebone black rev.C hardware.
I want to run my code after booting of beaglebone with out connecting to laptop or login process.
I want just powerup,then run my programe default.
/***************************Extra Information*************
#etc/inittab file
# The default runlevel.
id:2:initdefault:
# Boot-time system configuration/initialization script.
# This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/init.d/rcS
[Code] .....
View 0 Replies
View Related
Jul 13, 2010
I am using a script to start an application (with GUI, i.e. windows) in KDE. However, the window will always appear on the currently used desktop. I would like to define which desktop the application will appear to be able to just run in invisible in the background. How can I do this for KDE?
View 1 Replies
View Related
Dec 22, 2010
I installed CentOS 5.5 x86_64 on server as xen dom0. When i try to install CentOS 5.5 x86_64 as guest (hardware virtualization) i see "Kernel panic"...Installation not started: i see install cd's boot menu, press Enter... that's all.
Dom0 kernel: 2.6.18-194.26.1.el5xen, xen 3.0.3
Only standart installation, repo's and update's...
Code: 8b 72 40 48 8d 4c 24 1c 48 8b 7a 20 ba c4 01 00 00 e8 5f 77
RIP [<ffffffff8008192f>] cpuid4_cache_lookup+0x256/0x356
RSP <ffff81010fc75d60>[code]....
View 2 Replies
View Related
Jun 20, 2010
I would like to know if there is a solution to this problem. The multimedia hotkeys (play/pause, stop, volume up/down, volume mute, ecc) stop working when i open any menu (for example mintmenu, that i use, or any menu of firefox like bookmarks) or if i start an application, such as openarena. The major problem is for volumes keys, that stop working in these cases.
Any ideas? I tried to change keyboard model, disable hotkeys mapped in prefereces->keyboard shortcut (with this they just stop working), but nothing changed.
View 3 Replies
View Related
Apr 25, 2011
I've done an Upgrade from Lenny to Squeeze and I get these warning messages in syslog:
Code:
But gnome-volume-manager is not installed:
Code:
Maybe this is a reason, my Gnome Desktop from time to time is completely freezing.
View 5 Replies
View Related
Jul 27, 2011
LibreOffice 3.4 shows up as installed and in my applications menu, but when I try to open it (either through the menu or by opening a file) it shows up with the spinning thing in the task bar but then disappears and never opens.
Did I forget to install part of it?
View 1 Replies
View Related
May 11, 2011
I can start libreoffice as root user, but can't start as normal user. Shows error, exception "user" like something, now even that also stopped coming.
View 4 Replies
View Related
Jul 14, 2015
I would like to configure visudo to authorize user to start only one application with sudo on one peculiar host and forbid everything else so, after reading the man, I came up with :
Code:
Select alluser ALL = (ALL:ALL) !ALL
user host_name = /usr/bin/application
But it does not seem to work.
View 2 Replies
View Related
Jun 8, 2010
there's a little app called F.Lux that sets your screen temperature based on the time of day. The Linux version is a little spartan with just a console interface but it works perfectly well. The question I have is where can I invoke it so that it starts up after X has started?
View 4 Replies
View Related
Aug 4, 2011
I have two script under /etc/init.d/ 'jboss' and 'client'. By machine-reboot these two scripts will be run. But what I want now is: The 'client' can only be run after the 'jboss' is successfully up.
View 4 Replies
View Related
Apr 29, 2011
I'm using opensuse 11.4 kde 4.6. When I (try) to start libreoffice, splash window appears but program doesn't start.
When I launch it from console as normal user i don get any clue, but as root user i got this:
Code:
I run "export $(dbus-launch)" and libreoffice works, but only launching it as root user.
View 4 Replies
View Related
Dec 6, 2010
like the title openSUSE 11.3 KDE
View 4 Replies
View Related
Feb 17, 2010
I remember a friend of mine was able to get my computer to boot under CUI, and the command 'start x' started the GUI. with booting up my computer through CUI.
View 3 Replies
View Related
Jan 7, 2010
I'd like to make all window of of all applications are located in the center of screen when they are started every single time, is there any way to do that ? of course,what i am saying that they are GUI apps, and when they are not started as maximum size window
View 2 Replies
View Related
Dec 23, 2010
I just got an update for LibreOffice and got this error ... how can I fix it? I tried changing permissions of the sdraw.cfg file . E: /var/cache/apt/archives/libobasis3.3-en-us-help_3.3.0-18_i386.deb: trying to overwrite '/opt/libreoffice/basis3.3/help/en/sdraw.cfg', which is also in package libobasis3.3-en-us-draw 0
View 2 Replies
View Related
Feb 27, 2011
A few minutes ago, I added LibreOffice's PPA to my sources list. When I went to update my computer, this popped up:
Code:
An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message:
'E:Type 'a.launchpad.net/libreoffice/ppa/ubuntu' is not known on line 2 in source list /etc/apt/sources.list.d/libreoffice-ppa-maverick.list' So I tried reporting this bug by tapping Alt+F2 and entering:
Code:
ubuntu-bug update-manager
Then an error pops up, saying it could not determining the package or source package name.
When I try clicking on Ubuntu Software Centre, nothing pops up
I'm really puzzled and would at least like to remove that LibreOffice PPA so I can use Ubuntu Software Centre.
View 4 Replies
View Related
Feb 9, 2011
I am trying to build libreoffice 3 in my maverick machine, but after doing 'make' I got this build error
Building module boost
Entering /home/abr/libreoffice/libreoffice-build-3.3.0.4/build/libreoffice-3.3.0.4/boost
mkout -- version: 1.8
dmake: Error: -- `./unxlngppc.pro/misc/f02578f5218f217a9f20e9c30e119c6a-boost_1_44_0.unpack' not found, and can't be made
Forcing regeneration of dependency info
Nothing to do here...
dmake: Error: -- `./unxlngppc.pro/misc/f02578f5218f217a9f20e9c30e119c6a-boost_1_44_0.unpack' not found, and can't be made
Retrying /home/abr/libreoffice/libreoffice-build-3.3.0.4/build/libreoffice-3.3.0.4/boost
dmake: Error: -- `./unxlngppc.pro/misc/f02578f5218f217a9f20e9c30e119c6a-boost_1_44_0.unpack' not found, and can't be made
rm -Rf /home/abr/libreoffice/libreoffice-build-3.3.0.4/build/libreoffice-3.3.0.4/boost/unxlngppc.pro # optional module 'clean'
/bin/bash
cd /home/abr/libreoffice/libreoffice-build-3.3.0.4/build/libreoffice-3.3.0.4
source ./LinuxPPCEnv.Set.sh
cd boost
build
When the problem is isolated and fixed exit and re-run 'make' from the top-level
abr@abr-laptop:~/libreoffice/libreoffice-build-3.3.0.4/build/libreoffice-3.3.0.4/boost$
View 2 Replies
View Related
Dec 14, 2010
I recently installed KDE in my ubuntu 10.10. To access KDE, I want to use
startx /usr/bin/startkdeBut using it disables sound in KDE (Sound is working fine in GNOME). It doesn't sound for anything like login sound, totem, mplayer or any other playerBut when I press Alt+Ctrl+F1 to change to virtual console, the playback resumes from where it was in time and when coming back Alt+Ctrl+F7 and the time in totem (or any other player) doesn't move. While log out also it doesn't play logout sound and doesn't logout, so I have to press Ctrl+Alt+F1 so that logout sound play then it exits.When starting KDE by kdm or gdm, the sound works normally. But I don't want to login again using kdm or gdm and not to use root user to start kdm or gdm.I don't know what is the difference between when KDE is started by startx or by kdm/gdm where the same user login in kdm/gdm as that for startx
View 2 Replies
View Related
Nov 20, 2015
I'm running Debian 8..How do you upgrade Libreoffice to version 5?
View 4 Replies
View Related
Jan 14, 2011
I am trying couple of days now and I did not managed to intall it non of the ubuntu how to found on the web seemed to works with debian, doesnt anyone has some time to write a install libreoffice how to?
View 8 Replies
View Related
Apr 27, 2016
I tried to set up my linux server with a specific script that can control my gameserver (mta). The thing is, I wanted to let this script be forced to start by the systemd, so I created a service called 'mtadef' (btw: same name as the user).
Here is the service script:
Code: Select all[Unit]
Description="MTA: Primary Server"
[Service]
Type=Forking
User=mtadef
ExecStart=/home/mtadef/mtastart.sh
RemainAfterExit=yes
[Install]
WantedBy=multi-user.target
And here is my shellscript (mtastart.sh):
Code: Select all#!/bin/sh
if [ $# -ne 1 ]
then
screen -S MTA_def /home/mtadef/mta-server64 -screen 0 800x600x16 -ac
exit 1
[Code] ....
When I try to start the service by the command "systemctl start mtadef" now, I returns me the message:
"Must be connected to a terminal."
View 5 Replies
View Related
