Does anyone know how to schedule a Fedora box to automaticly shutdown and then resume later at a specific time?Shutting down is easy, but I have found nothing about the restarting part.
View 14 RepliesHow do I schedule a Squid restart on CENTOS for example at 13:10
View 2 Replies View RelatedIve tested this on 2 different machines each running Fedora 15. If I try to install gnome-schedule the system reports nothing to do or that the software is already installed. If I try to remove it the system reports that gnome-schedule is available but not installed. Anyone know how to approach this?
View 2 Replies View RelatedI have just finished the upgrade of the latest version and I'm at the point of my system restating.
My system automatically tried to restart but on the restart I got the 'terminal' view. It stopped when asking for my username (it never normally asks for this before the grub menu) and then password. I didn't get any further than that.
I now have on my screen (still in the terminal view before the grub menu)
"name@name-desktop:...$ "
I'm on my phone now so I don't actually have the symbol for before the dollar sign but your know what it is. The raised S on a 90 degree angle.
I`d like to find out how to restart USB ports without restarting whole system?I googled some but solutions mentioned were refering to some modules that are not present on F14.
View 2 Replies View RelatedJust curious if it is possible to schedule a complete system shutdown and start up?
My box with ubuntu server on it is only used as an ssh/proxy server, so I would like save on energy costs and add a layer of security by completely shutting it down during the hours I do not use it.
I have a system installed fedora 13 which I have updated yesterday. Now when I am trying to start system it restarts immediately after entering the user name and password. I am not the expert user.
View 1 Replies View RelatedI have a problem with the openoffice 3.1, install it and I worked fine in Fedora 14, but I restart the system and no longer works. nothing happens with any file.
to download from the official site and install it manually.
I can not fix
I am an absolutely beginner with Linux (ubuntu). I got fed up with widows and decided it was time to go. I installed (clean install from a cd) ubuntu 10.04 on my desktop. It is an hp compaq d220 MT.It looks good and feels good, well at least for a while since it keeps crashing. The screen starts to flicker, goes black, and the only way to get it up and running again is to press the on/off button until the system powers off and restart.
View 2 Replies View RelatedI would like to schedule a cron job to run on every first saturday of the month, so far all documentation that I have looked at, mentions only a weekly cron or a monthly cron based on the date. Is it possible to run a monthly cron based on the day of the week?
View 1 Replies View RelatedHow to schedule a job using cron that shouldn't run between working hrs 9am-5pm, while run in non working hrs every hour, every day of the month, month & week. I tried the following way, not sure I can use logical not operator(!).
crontab -e
0 !9-17 * * * /path/to/script/file
I guess other way is
0 17-8 * * * /path/to/script/file
How can I schedule some shell scripts at certain time and upon certain actions (on start, shut down, etc...)??
View 1 Replies View RelatedIs there such a schedule on this or other Fedora oriented sites? Livna currently installs 256.xx and I need 260.xx for CUDA 3.2 apps. Tried installing 260.19.04, 260.19.12 and 260.24 direct from Nvidia (while removing nouveau driver) on an updated F13 and startx fails.
View 3 Replies View RelatedI have 11.3 Gnome installed on a Dell Optiplex380, and I can fully shutdown, but the system hangs when I try to Restart. The Geeko logo is there and the white bar retracts, once it hits all gray it stays there until I force a hard-shutdown holding the computer power-button.What steps can I take to fix this or start troubleshooting?
View 3 Replies View RelatedI just installed Ubuntu 10.04 on my old Toshiba Satellite laptop. I'm dual booting with another Linux distro - ZenMini Everything works O.K. running Ubuntu but I can't restart the system with out it locking up. I have to power down completely from Ubuntu. I don't have any problem restarting with ZenMini so its obviously an Ubuntu problem.
View 3 Replies View RelatedAs the object, when I shutdown or restart my system, this will stuck on black screen for about 30/40 second and then continue...
My system is debian testing with kernel 4.1.0-2
I need to know: how do not automatically restart GNU/Linux after a critical system failure(kernel panic). For some reason the pc is rebooted, actually throws the error screen Reboot just moments before, but I can't to read it before you reboot.
View 1 Replies View RelatedI've recently installed 10.04 LTS on a desktop PC so I can use it as a Zabbix monitoring machine.
I fresh installed and all seemed to be well but after a few restarts the system suddenly refused to boot anymore. The BIOS splash screen comes up and then a cursor blinks on the screen for a couple of seconds and then... nothing. The keyboard and monitor both go unresponsive and nothing happens.
I can hear the HD spin up and it isn't making any weird noises. Also, booting from the CD works and I can see and work with the HD so I'm not convinced that this is the problem.
In fact, I actually did a fresh reinstallation of 10.4 onto the machine and started from scratch. Again it ran fine for a few hours while I was setting Zabbix up. After a couple of restarts, again the freeze on boot.
I ran a HD scan and everything seems fine. I've also switched the HD over to the second IDE connection in the box just in case...
Does anyone else have this problem? Is it a bug? Any ideas on how to workaround it? (Short of going back to a previous Ubuntu version)
After Ubuntu update, the system won't restart. Now, after BIOS start, I get the following message:" udevadm trigger is not permitted while udev is unconfigured."Then, after several seconds appear the following message:"Gave up waiting for root device.
View 1 Replies View RelatedI did a bit of searching, but I guess I'm not sure of the terminology associated with what I'm trying to do.
I'm currently connected via ethernet port (NOT wireless) to my DSL modem.
Every so often my connection gets 'saturated', typically after or during a lot of bittorrent activity that maxes out my bandwith, and my speeds drop markedly, even if the bandwith isn't currently being maxed out. I'm not sure whether it's my ISP throttling my connection or something else, but as a work around, I typically just disconnect my modem from the outlet and then replug to restore normal speeds.
Is there a way to 'restart' my modem from the command line in a similar way without having to physically turn off my modem to get the desired effect?
My system doesn't recognize my external HD when I restart. I have to unlug and replug it in every time. Is there a command I could add to startup apps that would do this for me?
View 7 Replies View RelatedI have dell xps 14 laptop sometimes sound gets choppy it get started breaking in middle of playing music then i need to restart the system to make it work. how to solve this without restarting? i m using ubuntu 10.10
View 4 Replies View RelatedI upgraded all xserver-xorg packages in my notebook. After restart system Xorg (GDM) don't run. My screen is black. If I will go to console CTRL+ALT+FX, screen is black too. I will go to console only in single-mode and I tried run dpkg-reconfigure xserver-xorg, but without results. I haven't got /etc/X11/xorg.conf in my system. I have got integrated Intel graphics card.
View 4 Replies View RelatedI have a primary language, Italian, and I want also use a secondary language, English. I want to switch language in order to have all the writings and messages in English not to write special characters by keyboard. I switched language in both kde system settings>Regional & language and in yast system>language leaving the keyboard layout Italian, but in the kde menu (the lizard on the left of panel) the groups of applications (multimedia, giochi, sistema) are in Italian and yast too (impostazioni amministratore), instead others are in English.
1)is this a bug or I forgot something?
2)which is the differences switching languages by yast and by kde system settings?
3)Is it possible to switch language and don't restart or logout the system?
I have opensuse 11.4 (Gnome + KDE) installed. The problem is with Gnome. When in KDE, everything works fine. But in gnome, when I shutdown/restart, it merely logs off the session. Then I have to shutdown it from the menu in the login screen.
View 2 Replies View RelatedI am new in Using Ubuntu, I need to set up environmental variables in Ubuntu, I do the following:
Code:
export JAVA_HOME=/path/to/Java
export PATH=$JAVA_HOME:$PATH
it work fine, but every time I restart the system I have to reset it again Is that the right way to it, or I do something wrong
I installed Lucid Beta a few days ago and was happy with the way everything worked. The system wanted an update on Thursday night, I installed it and then carried on using it for about an hour, it was then shutdown normally with no errors. On Friday morning it would not boot. I pressed the "on" button it came on, all the other lamps lit ie Caps and Num Lock, the battery light is on anyway, but the hard drive light is not flashing, it's as though it isn't being accessed, but I can hear it? There is no display on the screen. I'm running an Acer Aspire One. My initial thoughts are bios related, but I can't see how that would have changed, then I think maybe the Harddrive is knackered.
View 7 Replies View Relatedam starting to get this figured out. finally got the wifi working on a HP touchsmart tx2 laptop and once i give ubuntu a total system shutdown command this system restarts, is this normal or do i need to fix something?
View 2 Replies View RelatedI was a xp user.Recently I have diverted to Ubuntu 10.04LTS.When I have upgrades all packages,I was asked to restart system.I did the same.But After pressing restart button,there is something like....
Code:
Now I can not run my PC.There is XP on C drive,and Ubuntu in D drive installed in my harddisks.Now what should I do now.......
Is there anywhere I can check what is causing this loud system beep or a way to fix this?? I really don't know where to start on this issues. Possibly restart log files but not sure where they're located.
View 2 Replies View Related