Is there such a schedule on this or other Fedora oriented sites? Livna currently installs 256.xx and I need 260.xx for CUDA 3.2 apps. Tried installing 260.19.04, 260.19.12 and 260.24 direct from Nvidia (while removing nouveau driver) on an updated F13 and startx fails.
View 3 RepliesI just want to know the distribution which is supported for longer time ex: Ubuntu will be supported for 18 months fedora for 14months. I repeat,I want a distribution which is stable,which I can leave without upgrading to next version for atleast 2 or 3 years. tell me other than Ubuntu LTS version
View 5 Replies View RelatedI'd like to know if the latest release of the ATI Catalyst driver is compatible with Fedora 13.
View 14 Replies View RelatedI had a bad timing when I set up my system yesterday evening.Livna beeing not online for like almost 24hrs.I did download the rpm from a mirror mainwhile, but for some reason i dont understand, yum still aborts EVERY command if i dont add --disablerepo=livna.
View 10 Replies View RelatedI recently upgraded successfully from F8 to F10 with no problems. I have a question about repo compatabilities. The livna repo is still enabled after the upgrade. Is is compatable with the rpmfusion and fedora repos? should I disable the livna repo? will this cause any problems?
View 4 Replies View Relatedso i installed the livna driver according to leigh123@linux and when i tried to "gedit /etc/X11/xorg.conf" as root i got
Quote:
No protocol specified
(gedit:5031): Gtk-WARNING **: cannot open display: :0.0
i was able to oped gedit when i wasnt root, so i changed the permissions of xorg.conf and added the extra
Quote:
ModulePath "/usr/lib64/xorg/modules/drivers"
to the existing Section "Files" then rebooted. when i run livna-config-display as root i get
Quote:
No protocol specified Cannot import GTK. Please try setting DISPLAY and try again
this didn't really make sense to me, so installed gtk+, not sure if that just added to my problems or not...
when i run system-config-display as root i get
Quote:
No protocol specified
Traceback (most recent call last):
File "/usr/share/system-config-display/xconf.py", line 312, in <module>
hardware_state = XF86HardwareState(xconfig)
[Code].....
I am trying to configure an additional input device so I need to edit my xorg file. Any change I make is being lost when I reboot. The xorg gets reverted to seme default configuration. Even if the change is as simple as adding a comment. I have tried disallowing livna to edit the configuration file (using livna display configuration), but when I reboot, the system reverts back to the vesa display drivers.
How can I figure out what is recreating the xorg file? How can I disable this so my changes persist. Or is there another file I can add input devices to (or a way to automatically add them upon boot but before x starts?)
I was trying to install the Livna Repository for DVD playback and I get this
[code]...
I did a fresh install of Fedora 13, 32-bit, with GNOME desktop. My goal is to watch DVDs with VLC media player. I followed the steps in this website to install the media players, codecs, VLC etc. -
Code:
http://www.mjmwired.net/resources/mjm-fedora-f13.html
Everything was successful until I got stuck at this point (the DVD Playback section) -
Code:
#Setup the Livna Repository:
[Code]....
When I try to install some programs, like Asunder, I get the following:
Code:
[root@localhost theAdmiral]# yum install asunder
Loaded plugins: presto, refresh-packagekit
Could not retrieve mirrorlist http://rpm.livna.org/mirrorlist error was
14: PYCURL ERROR 7 - ""
Error: Cannot retrieve repository metadata (repomd.xml) for repository: livna. Please verify its path and try again
[Code]...
I would like to schedule a cron job to run on every first saturday of the month, so far all documentation that I have looked at, mentions only a weekly cron or a monthly cron based on the date. Is it possible to run a monthly cron based on the day of the week?
View 1 Replies View RelatedHow to schedule a job using cron that shouldn't run between working hrs 9am-5pm, while run in non working hrs every hour, every day of the month, month & week. I tried the following way, not sure I can use logical not operator(!).
crontab -e
0 !9-17 * * * /path/to/script/file
I guess other way is
0 17-8 * * * /path/to/script/file
Does anyone know how to schedule a Fedora box to automaticly shutdown and then resume later at a specific time?Shutting down is easy, but I have found nothing about the restarting part.
View 14 Replies View RelatedHow can I schedule some shell scripts at certain time and upon certain actions (on start, shut down, etc...)??
View 1 Replies View RelatedIve tested this on 2 different machines each running Fedora 15. If I try to install gnome-schedule the system reports nothing to do or that the software is already installed. If I try to remove it the system reports that gnome-schedule is available but not installed. Anyone know how to approach this?
View 2 Replies View Relatedrelease notes Flash Player 10.2 Release Notes
View 9 Replies View RelatedI'm planning to install Fedora 11 Release Candidate on my computer because I really need a working Linux system, right now. Once the final version is released, will I have to do a fresh install or do I just update the packages on my system to get the final version?
View 1 Replies View RelatedI hope this is the right section, it looks like though. I have a small nas ( via artigo a2000 ) with 2 sata hd 1tb each with raid 1 and lvm on top configured and working great.
sda1 and sdb1 ==> md0 raid1 for /boot
sda2 and sdb2 ==> md1 raid1 for swap
sda3 and sdb3 ==> md2 raid1 as physical volume then volume group and lvs on top ( / is a logial volume of these )
I wish to upgrade the current fedora 12 32bit installation I have on it doing a fresh install. But because I have a lot of data on md2 ( 600GB worth ) which I don't want to copy across somewhere else first, I need to know how ( i am pretty sure i can ) to mount md2 during the installation. This way I can use the data I already have on it.
I Have installed oracle 11g release 2 in fedora 12 but after completion of the installation there is no launch shortcut has generated nor any where any icon for launching oracle is given so now how can i run oracle.
View 3 Replies View Relatedhow will i be able to upgrade installation of fedora 14 to fedora 15 pre-release?
View 5 Replies View RelatedHas anyone used kpackage to upgrade release 13 to release 14?I keep getting a prompt to start the upgrade but am worried about the time it will take and what happens if the network hiccups..
View 1 Replies View RelatedI am new bie to linux and i am using FC 9. My intention is to install latest packages of FC11 release to FC9 despite of upgrading entire OS. is their any way to do this .... I have tried doing installing ssh package of FC11 release into FC9 OS but encountered with library errors.
View 7 Replies View RelatedI'm currently running F11 x86 and want to update to F13 x64, so a new drive and fresh install and copy all the config & data from old drive. and Prey, a lot....I'll be installing F13 x64 later this weekend, But F14 will be out in a few months then F15 and so on.I've tried the upgrade option (x86 to x86 in the past) on the install dvd but it doesn't work and I wind up with a broken install and have to do a fresh install after saving most of the import data and config files, but I usually missing something and get hosed. Part of the problem could be using Nvidia drivers for video and several applications installed from several different repos.I've never been able to safely uninstall the Nvidia driver and still have a working system, let alone upgrade to a newer version and still get a visible desktop.
I was thinking that couldn't I just edit a yum file and point it to a new repository and have it upgrade the machine with out all the fuss?I followed a procedure once or twice on how to do a inplace upgrade, but that didn't work either. I'd like to keep the machine running the latest bits, but with all the pain and suffering I need a simpler method to do it. Is there a procedure or process I can run or follow to keep Fedora in sync with the latest release with out having to continuously swap disks, reinstall and copy critical data files?
I have an F14 system which was created by preupgrade in two stages from an F12 system. I had a couple of preupgrade crashes along the way, but was able to resolve them and the installation appears to be working fine except for some minor yum problems. Yum appears to be confused about which release it is at. It has a number of 'fedora-release' packages installed:
Code:
Installed Packages
fedora-release.noarch 12-2 @updates
fedora-release.noarch 13-1 installed
fedora-release.noarch 14-1 installed
[Code]...
If I include --releasever=14 in each yum operation, things seem to work normally. However if I leave this out, every yum operation creates hundreds of 'duplicate package' messages, and fails to proceed. I assume if I could remove the outdated release packages, the problem would be resolved - but I haven't been able to find how to do this.
I'm currently using Fedora 15 Beta on my laptop and I always use YUM to update my OS every week. I have a question that when official release of Fedora 15 will be available, should I reinstall that stable version on my laptop? Does YUM application automatically update the latest packages for my OS?
View 1 Replies View RelatedI installed Fedora 15 but I cannot find the office program, only Evolution email, it was supposed to come with it but I cannot locate it?
View 10 Replies View RelatedI have two HP Quard core high end server.
OS : Red Hat Enterprise Linux Server release 5.2 (Tikanga)
Kernel : kernel-2.6.18-92.el5
From last couple of days I found entry in dmesg:
Should require KERNEL upgradation.?
Has someone managed to install Oracle 11.1 on Fedora 12 ?
The following packages failed to install :
I couldn't find any of these packages in the x64_86 or i386 DVD. i686 version of the above packages are already installed, but I still get the error while installation.
I saw a reference to a way to do this while searching for help with something else but don't remember where it was now. I know it is possible to make a local repository but that seems more for someone with a home network composed entirely of Fedora machines than what I'm looking for.In Ubuntu I could just copy the contents of the /var/cache/apt/archives directory and paste the debs into the new installation to be installed once the update manager saw that there were updates. I looked through the contents of the /var/cache/yum directory but I didn't see anything that looked like it would allow me to do this in Fedora. All I want is a way to download whatever updates I need (and there are 300mbs of updates from a fresh install) one time to allow me to catchup and now be waiting hours on my slow 700k connection to download everything.
Could someone point me to an easy to follow HOWTO that would walk me through creating a service pack of the basic default applications for Fedora 13 that will need to be installed or updated on any system?
the gnome-system-monitor in fedora 14 do not sho the distributionrelease in the system-tab. The place for the distribution release is empty.
View 7 Replies View Related