Ubuntu :: Restart Internet Connection In System?
Oct 21, 2010
I did a bit of searching, but I guess I'm not sure of the terminology associated with what I'm trying to do.
I'm currently connected via ethernet port (NOT wireless) to my DSL modem.
Every so often my connection gets 'saturated', typically after or during a lot of bittorrent activity that maxes out my bandwith, and my speeds drop markedly, even if the bandwith isn't currently being maxed out. I'm not sure whether it's my ISP throttling my connection or something else, but as a work around, I typically just disconnect my modem from the outlet and then replug to restore normal speeds.
Is there a way to 'restart' my modem from the command line in a similar way without having to physically turn off my modem to get the desired effect?
View 6 Replies
ADVERTISEMENT
May 20, 2011
I installed 11.04 via live install, and was connected to my home network/Internet. After the install finished and I restarted my pc, my network was not available nor internet connection. In the network manager I cannot access the "wired network" tab.
View 4 Replies
View Related
Apr 24, 2011
Like the title says, is there a way to restart the computer if the internet connection is lost?Is this possible on ubuntu?
View 3 Replies
View Related
Jun 23, 2011
Dell atitude E6420. e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 Firstly, I installed 11.04, 64 bit, I have wired internet but can not restart; then I switched to 10.04 LTS 64 bit, I can restart but I lost my wired internet. For both situation, wireless internet works well. I update the "linux-image-generic-lts-backport-maverick", then the wired internet works, it is fine. But, I can not restart the system, just same as 11.04. How to fix it?
View 2 Replies
View Related
Sep 12, 2010
How to set up internet сonnection in ubuntu...I have TCP / IP connection through the network card
View 9 Replies
View Related
Apr 30, 2011
I have just finished the upgrade of the latest version and I'm at the point of my system restating.
My system automatically tried to restart but on the restart I got the 'terminal' view. It stopped when asking for my username (it never normally asks for this before the grub menu) and then password. I didn't get any further than that.
I now have on my screen (still in the terminal view before the grub menu)
"name@name-desktop:...$ "
I'm on my phone now so I don't actually have the symbol for before the dollar sign but your know what it is. The raised S on a 90 degree angle.
View 6 Replies
View Related
May 2, 2010
I just installed Suse Linux on a computer that had Windows Vista first.
Everything seems to work ... only that there is no Internet connection.
What could be the problem?
View 15 Replies
View Related
Apr 4, 2010
I recently installed ubuntu studio 9.10 amd64 on my MBP 5,3 I need an internet connection for updates and to customise my system etc I tried to connect with a wired connection but for some reason I could not configure the ethernet interface. I tried to install the broadcom bcmwl-kernel-source driver by downloading it on another computer and then using a usb stick to transfer it. I had to go through installing several dependencies including dkms and linux-headers-generic. When I finally succeeded the driver showed up in Hardware privers as proprietry but was inactive. Whenever I try to active it I hit 'Activat' I authenticate and the nothing happens. It remains inactive. The wired connection is not readily available to me so it would be great if it was possible to solve this either via a usb or cd.
View 1 Replies
View Related
May 5, 2010
I'm running Kubuntu 10.4, and I'm having a really slow Internet connection, with Windows everything works fine.
When I upload a file to an internal Ubuntu server the speed is ok ~15MB/s.
The problem is only with Internet Firefox / synaptic, any program using Internet. Last download done with synaptic display 18KB/s when normally it should be 500.
View 9 Replies
View Related
Jan 24, 2011
So I just installed ubuntu from a net install, and updated from the internet and posted on this site through firefox while installing vlc wich just froze at 90%.....
but when I try to add community repos it comes up with errors. And while running a system check it says I have no internet connection...
I'm connected through ethernet on a router wich works with the g5 in the other room running osx, and the pc upstairs running ubuntu meerkat. Now I had this same problem with SUSE 11.1 and worked around it by adding through terminal but I was never able to add from the GUI.
View 1 Replies
View Related
Jan 20, 2011
Is there any way to temporarily "switch off (and back on)" the internet connection on a system (that runs linux)? The following methods are not allowed:Turning off the router. That would lead to a lot of angry young individuals. This method must be particular to my workstation.Use root privileges (coz I do not have them).
Yank the ethernet cable from the system.Why: Sometimes the internet proves to be a distraction.I am using the following system: Fedora release 11 (Leonidas), linux kernel 2.6.30 and GNOME 2.26.3
View 1 Replies
View Related
Jan 19, 2011
I am using Linux operating system fedora 6 .Before today everything is going well. But today internet connection gets failed. It can not connect to the server for the internet connection. But in the same computer,installed windows operating system shows the internet connection.Please try to answer my question why the Linux operating system can not connect to the internet?
View 4 Replies
View Related
Mar 28, 2010
Failed to fetch [URL] Could not connect to 127.0.0.1:8118 (127.0.0.1). - connect (111 Connection refused)----when tor and polipo are not running---
Possible causes:
I just installed tor, privoxy, and polipo and set them up for web browsing anonymity. Other than that I don't recall making any system wide changes.
Other Info:
I can access the internet via a web browser and other programs just fine because i can manually edit each program's internet connection settings. apt-get works when tor and polipo are running. I have used tor and privoxy/polipo in the past and this has never been a problem, so I must have done something different this go around. Obviously I am not sure what that is. Attached are the applicable config files.
View 2 Replies
View Related
Aug 13, 2010
I,m new to linux. I don't know how to do settings for Internet connection.
so, please send me complete detail of how to make settings for Internet connection.
View 3 Replies
View Related
Dec 14, 2010
I am new to Linux and Debian. I have Compaq Presario R3000 laptop, which is 5 years old now. I have RealTek RTL8139 family PCI Fast Ethernet NIC. Currently I have a broadband connection at home. I have dual boot Windows XP Professional and Debian (which I installed a week ago through CD). I have done some preliminary tests for the network and I am posting the screenshots for the tests (e.g. lspci, ifconfig, etc.). I also did two more commands. For 'cat /etc/network/ifstate' the output was 'No such file or directory'. Same output was for the command 'cat /etc/network/options'.
View 7 Replies
View Related
Jan 9, 2011
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies
View Related
Sep 16, 2010
I'm using RedHat Linux. In my friend system have Winxp. I have 2 LAN Cards. I'm using wired Broadband internet. So i want to share my internet connection to my friend system through another one LAN card. How can i do this
View 2 Replies
View Related
Sep 6, 2010
I am an absolutely beginner with Linux (ubuntu). I got fed up with widows and decided it was time to go. I installed (clean install from a cd) ubuntu 10.04 on my desktop. It is an hp compaq d220 MT.It looks good and feels good, well at least for a while since it keeps crashing. The screen starts to flicker, goes black, and the only way to get it up and running again is to press the on/off button until the system powers off and restart.
View 2 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Jan 26, 2010
It is most certainly my fault but I am now without a sound volume control and it does not show up in the add to panel.What can I do here? Does your icon have code that that I can use or can I find the file somewhere and create a link? Alsa mixer works ok and nothing is muted and I have sound so as to play music. The Internet connection and the power connection icons also don't appear.
View 5 Replies
View Related
Apr 30, 2010
I had this issue in 9.04, resolved it in 9.10 (it went away on its own), but it's back in 10.04..I currently run my Ubuntu machine as a headless server and connect to it using TightVNC from a Windows computer.However, this connection won't work unless I start the Ubuntu machine with a monitor connected. Once that's done, the remote connection works fine until the Ubuntu machine has to be restarted. Thankfully Linux doesn't need restarting as much as Windows does, but unfortunately, every time I restart (i.e. with a kernel update, which happened at least a half-dozen times with 9.10), I have to plug the monitor in or TightVNC won't be able to connect.
System - Control Centre - Remote Desktop is set to allow remote connections as it should, I haven't altered this on upgrade.It's like it's some sort of graphics issue - if no monitor is detected on startup, disable the GUI completely...the system runs fine in remote terminal mode over putty, it's serving files fine and running the few server apps I have on it, but nothing over TightVNC.
View 5 Replies
View Related
Jun 4, 2010
After upgrading to Ubuntu 10.04, I'm not able to make any connection to the internet with either my netbook through WiFi or my computer on wired LAN. I can, however, ping my Solaris machines and Macbook. How do I fix this?
View 9 Replies
View Related
Oct 21, 2010
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies
View Related
May 1, 2011
I seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies
View Related
May 7, 2010
Following upgrading my 09.04 partition to 09.10 then 10.04, all was working fine until I tried hibernate out for the first time - big mistake! If I can get to a position where i can log on to the system, I find that my ethernet network connection is disabled and I cannot get it to restart. My 09.10 system still works ok. I am tempted to do a clean install of 10.04, even though I'll have to spend some time reloading the extra's and re-configuring.
View 1 Replies
View Related
Aug 11, 2010
My ISP pushes software updates occasionally to my router. This also forces the router to restart. When the router restarts, my ubuntu box loses its network connection and does not automatically restore it after the router comes back online.How can I configure ubuntu to restore the connection once it is available again? It happens on my windows workstation...I am using ubuntu on a box with no screen / keyboard / mouse it serves as a fileserver and I remote desktop in. Obviously if the box drops the connection it is a major annoyance. I am using version 9.10
View 1 Replies
View Related
Apr 15, 2011
1 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:
[code]....
I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.
View 4 Replies
View Related
Jun 25, 2010
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
View 14 Replies
View Related
Jun 21, 2009
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
View 3 Replies
View Related
Feb 4, 2010
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies
View Related
