Fedora Installation :: Blank Screen With Cursor - Installer Acting Up
Dec 4, 2009
when I fired up the installer, after asking to test the media (which I skipped) and starting up the actual installer (anakonda, akonadi, whatever the name was, can't remember now and too lazy to look it up), it seemed to start up fine, except I couldn't get the wizard to show up. I did see the cursor, and occasionally I would get the "searching for storage devices" message (I restarted it a few times to see if I would get it working), but nothing. I also tried random key presses (namely F12,F1-F4), and after some time got a message saying that I had to enter the root password, so I presumably got to the root password screen blind...? (meaning that the installer apparently is ther, I just don't see it?)
After several restarts, though, I managed to get the wizard visible (just luck?), so I went ahead with it, but apparently I messed it up, when I rebooted I didn't get the screen visible again, after some random keypresses I got to the login prompt but I obviously hadn't created any accounts, so :/ I tried booting from the DVD to the rescue mode and manually adduser-ing from the console, but when I tried logging on, it would just come up with some kinda bluetooth-related error message and then hang on there with only the background image on the screen. I didn't try the basic video driver thingy yet because this didn't seem like a video driver issue (well, not entirely anyways), and I need my 3D acceleration, so...
Basically, I'd be glad if anyone knows what's up with the installer, and if it's not fixable as such, would installing with the basic video driver and then installing the proprietary drivers afterwards be all right? Sorry for the wall-of-text, though, it's just one of those days, it's bedtime and I get carried away...
I am a complete Linux newbie and I tried installing the latest release candidate (10.04) as a dual boot with Windows XP. The install seemed to go fine and it said it needed to reboot to finish the install. It rebooted and then displayed a series of errors on a DOS-like screen (which I wish I wrote down). When I realized that it was definitely hung, I then held the power button to shut it off. After that, all it does is boot to up to a blank/black screen with a cursor.The box is old and I was actually going to throw it away, but I figured this was a good opportunity to give Linux a try. At this point, I'm willing to go to either Windows or Ubuntu... I don't really care which. I actually just want to recover some files on the box
Whenever I boot the system after the fedora 12 bubble fills up I see a blank screen with a blinking cursor. Though I am able to access tty2 by pressing alt+ctrl+F2.
I have seen the boot logs and it shows a warning:
Code: Warning: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/
I have an ATI Radeon 3xxx series card and I have recently installed mesa-dri-drivers.x86_64. I guess the blank screen problem is because xorg for fedora 12 doesn't support these drivers.
I want to remove this package using yum, but when I try to do it using "yum remove" it shows 95 packages that would be uninstalled with it. I don't want to remove those packages as it has some that I use like Konversation.
how do I remove mesa-dri-drivers and what were the drivers that were being used before I installed mesa.
After installation of Fedora core6, only i can access to Graphical interface(ctrl+alt+F7) only. When i press ctrl+alt+F1 ,F2, etc.only get blank screen alone with blinking cursor. My system configuration is PIII, Intel 810 chipset.
I recently installed Ubuntu 10.04 on my Aspire One netbook, but everytime while booting, I am stuck at a blank screen with a blinking cursor. I've tried reinstalling but to no help. I've also tried installing 9.10, which will boot, then upgrading to 10.04 which then produces the same problem.
I have installed today Ubuntu 10.4 LTS ..after installation the OS does not boot and just shows blank screen with cursor blinking ...any idea ..I have searched the forum a lot but cannot understand why this is happening ..re-installed twice ..This is AMD64 bit but I am installing the 32 bit ubuntu 10.4 LTS.
I have a desktop with AMD Sempron 3000+, 1.2GB RAM, VIA S3G Unichrome Pro IGP, VIA SATA RAID controller based disks, PS/2 mouse and keyboard running Windows XP. Wanted to move to years ago favourite (linux based systems), I downloaded Ubuntu 10.04 for i386 and am trying to install both using CD as well as USB. After the Ubuntu start-up menu for installation, I select install Ubuntu option, turn off 'quiet' so that I can see what happens. The screen goes blank dark with a flashing cursor at the top.
In the kernel messages, the see that it has detected the processor, set the clock, assigned the PS/2 keyboard to input3 and then says: [1.911624] isapnp: no plug and play device found After this, the system hangs. Keyboard doesn't work.
My new PC fails boot when having my IDE DVD drive connected. If the drive is removed the OS boots up without any issue. Once the PC is powered ON, the grub menu shows up, but when Ubuntu 10.10 is selected I get a blank screen with a blinking cursor on the top left corner and I have only option to force shutdown the CPU.ON selecting windows 7 i'm able to boot successfully and use the DVD drive without any problems.
I have installed it from usb as the cd installation failed at the point where you decide which type of installation you want (lamp or samba, etc)the installation completed but when booting nothing happens, only a black screen with a blinking cursor. pressing the shift key or any other keys doesn't work.strangely when i boot from the usb flash drive again (and not from the hard drive) the server does boot and asks for the user name and password!i have chosen the guided lvm partition with 20% reserved for system files.my machine is an athlon xp 2GHz (32bit), 1GB, SATA hard drive, nvidia 6600 graphicsmy guess is that its a problem with grub and lvm.
1) Burned Ubuntu 10.10 to a disk, When tried to install (Select Install Ubuntu) screen goes blank with dim backlight and a blinking cursor on top. Same thing happens with Try Ubuntu without installing.. 2) Tried on Lenovo T410 and Dell 1330. issue exactly remains the same.3) Tried it on a VM Worksation 6.0, "This kernel requires an x86-64 cpu but only detected an i686 error is popping up". So thought its a Ubuntu x32 an compatibility, hence downloading the 64 bit now. Will burn and check it later.
Brand: Lenovo T410 Intel(R) Core(TM) i5 CPU M520 @2.40Ghz BIOS: A1674IMS Ver 1.0L
I recently followed instructions to enable the nvidia driver. run the following commands:
[Code]....
then rebooted, a tricoloured loading bar appeared and finished, then all i got was a blank screen with flashing cursor. I don't get a prompt to login and can't access my account. I am dual booting on this machine with ubuntu, is there anyway i can restore my fedora partition and enable my nvidia graphics
I have just updated to 10.04 on my Dell Insperon 8200 laptop, and all seems well with Linux.My problem is that although it shows in Grub Windows XP will not load. I just get a blank screen with a flashing cursor.I have tried to grub-mkconfig and grub-update, both of which reported successful results.However on reboot I still get a blank screen for windows.This was not an issue with 9.04 and 9.10.so I don't think it is the machine.
Just curious if there is any sort of issues with Ubuntu and JBOD assignments. I had my 2 500GB hdd's as JBOD through my mobo BIOS/RAID Config and it didn't like it. It installed just fine and showed the hard drives separately. I really didn't think anything of it so I continued on.After the install completed successfully, and I rebooted the system, it came to a blank screen with a blinking cursor and wouldn't continue on. So I tried restarting a few times, no luck. Finally I was like "okay screw this, going to install with no RAID setup or JBOD setup." (had RAID issues last night. rabble rabble) Removed RAID configurations and BAM started right up..S. Semi-new to Linux/Ubuntu. Know the basics and what not, just not some of the more advanced stuff.Edit: Okay, so I restarted my computer and removed my USB drive (which I had installed Ubuntu from) and it didn't boot. So it was NOT an issue with JBOD. Guess I'll look for a resolution for that, though.
I shut down my laptop, which is running Ubuntu 9.10, without any problems. When I got home and tried to boot it, it finishes the POST and then I get a blank screen with a cursor for a few seconds. The word "GRUB" then appears in the upper left hand corner and that's it. The system is hung and I have to power off.
I've seen a lot of discussion that 9.10 uses grub2. Any ideas how I get out of this? Do I need to downgrade to legacy grub?
Whenever I boot the system after the fedora 12 bubble fills up I see a blank screen with a blinking cursor. Though I am able to access tty2 by pressing alt+ctrl+F2. I have an ATI Radeon 3xxx series card and I have recently installed mesa-dri-drivers.x86_64. I guess the blank screen problem is because xorg for fedora 12 doesn't support these drivers.
I want to remove this package using yum, but when I try to do it using "yum remove" it shows 95 packages that would be uninstalled with it. I don't want to remove those packages as it has some that I use like Konversation. Also I am not able to install anything using YUM. It gives the following error:
Code: [error 14] PYCURL ERROR 6-"" I work behind a proxy.
Please help as to how do I remove mesa-dri-drivers and what were the drivers that were being used before I installed mesa.
Running 10.04 as the only OS on a HP desktop - been running fine for months. Did an update - probably hadn't done one for a couple of months - may be a red herring. The system appeared to crash while inactive. Trying to boot - I get the Ubuntu 10.04 screen for a short while then it goes to blank screen with a flashing cursor at the top - occasionally it will give me an error that /home is not ready - skip or manual fix. I have sda1 = ext4 root
sda2 = swap sda3 = ext4 home sdb1 = ntfs
I removed sdb1 from fstab as initially it was complaining about this drive not being ready. The error switched to complaining about /home. I am able to mount both of those filesystems with no problem manually. I ran mke3fs on /home (I forgot the -n parameter! but no problem as I have good backups) - same error - complains about /home not being available at boot even though I can always manually mount it from live cd or manual recovery. I can rebuild this system - and I may as it was upgraded from 9.10 - I may do a fresh 10.04, but I would like to fix the boot problem in case something like this happens again when I actually care about fixing it.I recreated the grub2 configs - I don't have the command to hand, something like: sudo update-grub --root-directory=/mnt/boot/grub /dev/sda
several months ago I installed Maverick and it worked well, but eventually I lost the GUI. I fiddled with it to no avail. So I decided to do the Natty upgrade and it ended up not fixing the problem though I am able to boot to graphics safe mode.
I popped on this forum and a couple others but got little response and ran out of fiddle time. SO now I have a little time to mess with this, and I REALLY want to move back over to Ubuntu so if any one is familiar with that could be the issue
I'm using "sudo rtcwake -m disk -s 5000" or whatever the seconds is for the time I need it. It doesn't help if I use mem. Anyone know what's up or know a better program?
I have reinstalled the OS a couple times now. Not sure what else to check.(noobie)Its on a RAID 1 controller, so I'm wondering if that has something to do with it
Slack 13.0 X sometimes fails to start after boot about 50% of the time. linux says "starting X11 session" then I get a blank screen with a flashing cursor and absolutely nothing else. I can <ctrl>-<alt>-<F7> and get a text prompt, log in, and startx from a command prompt. After that, I can reboot once or twice and still get a graphic login, but will soon revert to the dumped condition. I have reinstalled X and KDE twice now as well as deleting my .kde folder. This condition started when I inadvertently ran out of disk space on my /home drive. Since then I have migrated /home to a larger drive and watch it's disk space very carefully.
On my dual core AMD with 2 gig of memory I installed Lubuntu in VirtualBox for testing and the install was very smooth. My primary OS is Ubuntu 10.04 and it runs sweet. When I boot the Lubuntu virtual machine all I get is the arrow cursor and a blank screen.
This is probably not possible, but just wondering, restarted centos 5.2 remotely, hung at shutdown, kvm'ed to see what was hanging it up, control c'ed and then ctl alt del, just trying to kill the process, was brought back to the login screen, but unable to type anything. Alt-f1 switched to a different virtual console, which was just a blank screen and a blinking cursor, but now able to type things. Want to avoid hard shutdown. Is there anyway to force shutdown/reboot the machine from this console?
I have just bought a Dell Optiplex 960 with a NVIDIA Quadro NVS 450. Everything works out of the box with the 10.04.1 Live CD. It suggests to install and activate NVIDIA proprietary drivers, but you need to restart the machine afterwards.The problem is that, after that, all what you get is a blank screen, with not even a cursor.The same happens when you install Lucid: blank screen with no cursor.
Ctrl+F1 does not show anything, but Ctrl+Alt+Prnt Scrn+REISUB works and the PC is reset.In the var directory the logs show that the NVIDIA module is not loaded.
I have Fedora12 and it was working fine all through. I Installed Skype yesterday and since it was working, I installed the following using instructions from a blog. These were to install
Skype started to work well. However, after I rebooted the system, all I get is a blank screen with a blinking cursor. I am able ot get to tty by doing ctrl+alt+f2 but am not sure how to proceed from the above. I also erased the above packages thinking that that might solve. But it hasnot solved the issue.
Did a quick search for these symptoms and couldn't find anything related. After upgrading to 10.04 I found that the computer (HP NC8000) now crashes frequently and at random intervals. It occurs sometimes after only a few minutes, other times after an hour or two. It happens while its in use, or while its idle, wether the screensaver is on or not, even if its locked and the lid closed. When I walk away and come back I find the screen has gone blank (except for the Mouse Pointer and a cursor in the top left) and the Caps Lock Light and Num Lock Light are flashing (signifying a crash)
I caught it while I was using it and watched as the screen suddenly went blank as described above. No errors or explanations or warning. A reboot restores order, but not for long. Some assistance with diagnosing this would be helpful. I suspect it could be ATI radeon 9600 mobility related, as with each passing version of ubuntu it seems to be more unstable
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
I have just upgraded from 10.04 (where everything was working fine) to 10.10...I am able to boot in recovery mode (graphic mode is working ok this way), but not in normal mode: just after the purple Maverick boot screen, I get a black screen where my computer stucks, possibly for ever (although I can't be definitive on this point )Do you guys have any thought on what is going on here?I boot once in recovery mode, updated my graphic driver (ati, which was not working well anymre according to catalyst), and then I thought everything would be allright, but it is not the case: still black screen at boot.
I have installed F12 on the remaining space on my disk and now Windows does not boot anymore. I get to Grub and choose windows and then just get black screen with flashing cursor.
