Fedora Installation :: Screen Goes Blank After Sellecting Install?
Feb 9, 2011
trying to install fedora but after I sellect install or install with basic video, the screen scrolls a bunch of text then goes blank. I'm on a laptop and tried unplugging. The lcd monitor but it still goes blank on the laptop screen. The cd is no longer spinning and the hdd light isn't blinking. What do I do?---------- Post added at 10:44 PM ---------- Previous post was at 10:11 PM ----------Sorry if my description of the problem is confusing, here's a video of what its doing
View 1 Replies
ADVERTISEMENT
Mar 6, 2009
i had a serious problemafter i checked my hardware detected by using liveCD, there's no problem i thoughti successfully installed it on my PCbuti got blank/no screen appeared when it started up
View 1 Replies
View Related
Nov 21, 2010
I am trying to use a F14 network install CD to upgrade on an old HP Pavilion 9695C (Athalon 850MHz, nVidia NV5 RIVA TNT2/TNT2 Pro AGP) with F12 on it. This same disk successfully upgraded a HP Omnibook 6000 with F12. I boot with the network install CD and get the initial menu to select to install/upgrade, install using basic video driver, etc. After selecting either upgrade or basic video driver install, I see the CD being read, then nothing, just a blank screen. I had a similar problem with F12 network install on this machine. So I tried adding "vga=0x318 nomodeset" to the upgrade boot options. The only difference is a quick flash on the screen, then a blinking "underscore character" cursor. The "install using basic video driver" has the same result.
Have also tried:linux nofb
vga=791 [nomodeset]
vga=1 [nomodeset]
xdriver=nv nomodeset
xdriver=vesa nomodeset
However, I always end up with a blank screen or blank screen with blinking underscore cursor. I know this particular AGP has problems with the nouveau driver. On F12 I had to force it to use the nv driver. I submitted a bug but there was no interest on it as this was F12 and F13 was the latest at the time. I did try to upgrade to F13, but ran into this same problem. I was hoping F14 would be better.
View 11 Replies
View Related
Mar 5, 2010
I have the following system using an ATI graphics card, SATA Drives and want to install Fedora 12 as a dual boot option with Windows XP.
Using an install DVD it seems that Fedora installs then at a point during the copying of packages the screen goes blank actually switches off. The DVD Drive and Hard drive still work , my guess is completeing the install. On reboot I do not get the option to boot to linux.
I have 2 SATA 3Gbs Hard Drives formatted for windows NTfs. One has 2 partitions and some free space, the other is formatted NTFS and is my data disk.
I would like to be able to access the data disk with both Windows and Linux and install Linux system in the free space.
Having read a few of the guides available, none of them seem to mention this problem, although I am aware of the Ati support problem. I am hoping I do not have to replace my graphics card with a nVidia one.
View 2 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Apr 9, 2009
I'm trying to build a dual boot ubuntu 8.10 and fedora 10.I have ubuntu sucessfully installed. with a free partition ready for fedora.I cant seem to get fedora past the beginning of the install. Once it says its loading anaconda, my screen either goes blank, or the anaconda fails and the install exits, telling me to reboot my system.I have downloaded the DVD twice. once from the website, and i think when I bruned it it didn't burn right, I then downloaded it from torrent just to be safe and reburned at the slowest speed. It passes the media test.
I have been reading around it may be cause of my video card?My computer is the following.AMD Athlon +2400 XPXFX Nvidia Geforce 6800 GT or something close.80 gig hard drive1.5 gigs of DDR ram.MSI Motherboard not sure of model off top of my head.I really wanna get this dual boot working, As I feel fedora may have advantages over ubuntu. I was going to try to get ahold of another video card, and maybe try that. What do you think I should do
View 14 Replies
View Related
Mar 7, 2010
Ok well this is my first post on the ubuntu forums and the problem I have is, hopefully, pretty simple to fix. When I am installing Ubuntu, I go through all of the steps and once it asks where to install and partitioning and all that I tell it to erase the entire windows thing and put in Ubuntu. So I click the Forward button and when it gets to 69% of copying files, the screen goes black. It sounds like its still running the install but I cant be sure. What should I do?
View 1 Replies
View Related
Mar 10, 2010
I've found similar posts to this but none seemed to be solved. I'm trying to install ubuntu 9.10 on my new laptop. Dual boot Win 7 Pro on first partition.Its a gateway nv79 laptop with an intel i3 330M processor.The problem occurs when I boot from the CD I get the first menu where you can choose to install, load ubuntu from CD, etc. No matter which option I choose, I get nothing but a blank screen. Then I can do nothing but power down by holding the power button.I've tried both 64 and 32 bit versions, same thing. The 32 bit disk works fine on another computer. I've also tried booting another version of Linux, Helix, from CD and that also works fine. I'm thinking ubuntu doesnt support my graphics card: Intel Graphics Media Accelerator HD
View 1 Replies
View Related
Jul 7, 2010
I've searched the forums and all the problems seem to be getting a blank screen after the first menu or first splash screen.My problem is that I'm getting a blank screen straight away without seeing anything. As soon as the system says that it's booting from CD the screen goes blank and nothing happens.I've done the md5sum on the disc successfully (and the iso). It's an old system (P4) and I'm using the integrated graphics.I've tried Ubuntu Server 10.04, UNE 10.04 and Ubuntu 9.04, all have the same problem.
View 1 Replies
View Related
Oct 24, 2010
I'm installing Ubuntu 10.10 64bit (and ive tried 32bit) on a brand new Sony Vaio as a dual boot on Windows 7.
All goes well and I eventually get to the desktop on Ubuntu but the screen isnt right. Its not so much the resolution as its perfect in clarity but its the physical borders right and bottom are out of screen. Move the mouse to the right and bottom and the mouse disappears. I cant see the bottom bar at all. But like I said, the res clarity is perfect. I've tried playing with the res but it wont change the border issue.
Soon enough, on the top right, I get a hardware driver update alert for a Nvidia and asks me to activate. I do this with the hope to fix my screen size issue. Once activated, I restart and thats it, I get a blank screen.
This is what ive tried:
In recovery mode, i can get in with low-graphics.
Uninstalled the Ubuntu recommended Nvidia driver and all is ok.
Tried downloaded the correct Nvidia driver for my laptop but exact same.
In low graphics mode, when I launch Nvidia X Server, I get this error: 'You do not appear to be using the Nvidia X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root), and restart X server.'
View 2 Replies
View Related
Mar 8, 2011
After selecting "Install Ubuntu", the screen goes blank and nothing happens. I am using a HP laptop and am trying to install Ubuntu 9.10 from a CD I ordered from ubuntu site.
View 9 Replies
View Related
Feb 17, 2011
It seems I am having the same problem, but on a Toughbook CF-28. I tried searching the forum for a solution, and Google, but to no avail. Here is the run down:Installed Debian 6.0 from the NetInst (i386) CD, and all went well. Re-started the laptop, and all booted up fine (got the code lines). When the login screen should appear, all I get ilackscreen.CF-28 Hardware:RAM: 512MB. CPU: Pentium III Mobile 800 MHz (Im guessing from Google) Searches) Not sure what else it has, no information came with the laptop. I do know it has an ethernet port, which worked durininstall, has no wireless, does have a touch screen.I apologize for my noobness, but I am uber new to Linux. Any ideas on how to resolve this issue?
View 14 Replies
View Related
Feb 11, 2010
I'm extremely close to getting ubuntu on my old Toshiba Sattelite 1135-S155. It meets the minimum requirements (barely).I was able to go through almost the entire install process, but at the end when I restarted, I was told to remove the disc and hit enter, which I did. Then nothing but a black screen with a blinking cursor and unresponsive keyboard. I powered down, restarted, and got the grub. Same thing: it identifies the Ubuntu OS , but when I select it to boot, nothing but a black screen with a blinking cursor and unresponsive keyboard.
I'm trying to run this machine purely on ubuntu- no windows installed.I can actually load and run the OS from the "Try Ubuntu" option that rune off the CD.
View 3 Replies
View Related
Apr 14, 2011
I Just installed OpenSuse 11.4-32 bit with KDE 4.6 on my PC. At first boot everything was working, then I added the community ATI/AMD repository to get the drivers for my ATI 5570, but after reboot i got a blank screen. So I ran the "failsafe mode" in the boot menu, it worked (3D accel. as well), but just for the root user. To make it work for the non-root user had to set the setuid bit for /usr/bin/Xorg. (is it ok to run xorg with superuser privileges?) Then I tryed to understand wich is the kernel option actually needed for X to start, and after a few attempts I realized the only option really needed is the "nomodeset". what is the nomodeset option for? and why I need it to run in the graphic mode?
View 9 Replies
View Related
Jan 14, 2010
I had ubuntu running just fine on another computer, but had to move things around to make Windows7 run better. So after backing up Home, I switched hard drives, pulled the video card, and adjusted RAM, I tried booting up. The computer found all the changes and did its thing. But then it hung with a blank screen. I figured that it didn't recongnize the video driver for this computer, or something, so I did a fresh install with 9.10 to start over from scratch. The boot up went great, and finished completely. I made a few changes to the desktop, and loaded in my archived firefox bookmarks and evolution files. After rebooting, the first ubuntu logo came up, but then the blank screen, with no drum sounds. I tried a few more times rebooting and hitting esc, but I don't know what I am doing at that menu. I also tried the F1 option, but again, I don't know anything. One other time I was able to boot into ubuntu all the way when I was hitting esc slowing (waiting) and somehow was able to get the login and the desktop just fine. I haven't been able to get that to happen again.
Can someone walk me through the steps to troubleshoot this? I don't know any terminal jargon or commands, and haven't really got a clue, but I really want to learn and figure this out. I don't even know how to go in from the command line to see what my system specs or video specs are to tell you.
View 1 Replies
View Related
May 1, 2010
My laptop: MSI AMD Athlon 64x2 Nvidia GeForce GO 6100.
I've done a fresh install of Ubuntu 10.04 and I end-up with a blank screen. I've also tried a fresh install of Xubuntu 10.04 and Kubuntu 10.04 and I get the same blank screen.
Ubuntu 9.10 was working perfectly though. So what do you think happened?
I installed the Ubuntu 10.04 livecd on my desktop and it works perfectly so I think it is not a burning problem.
View 5 Replies
View Related
Jun 4, 2010
I have installed today Ubuntu 10.4 LTS ..after installation the OS does not boot and just shows blank screen with cursor blinking ...any idea ..I have searched the forum a lot but cannot understand why this is happening ..re-installed twice ..This is AMD64 bit but I am installing the 32 bit ubuntu 10.4 LTS.
View 9 Replies
View Related
Aug 1, 2010
I just setup a Fujitsu s6231 lifebook with Lucid. When I boot there is no grub menu unless i press the "start" key. Then the only way i can get into the machine is by entering into recovery mode and booting in "safe graphics mode".
Everything works fine once I am able to log on the "safe graphic mode".
If i don't press the "start" key the ubuntu logo will flash for 3 seconds and then the screen goes blank and nothing happens.
View 3 Replies
View Related
Oct 13, 2010
I just bought a new Dell Latitude E6510. When I boot from the Ubuntu 10.10 64bit disk (I've checked the disk for errors already), the initial, purple splash screen comes up, but then the screen just goes blank and stays that way. I never even see a grub screen.I tried Linux Mint 9 with both the 64 bit DVD and the 32 bit CD. Both Mint disks bring up a grub boot screen, but then the screen goes blank just like Ubuntu 10.10. I can hear Mint's "login" sound, but nothing shows up on the screen
View 3 Replies
View Related
Apr 21, 2011
I'm trying to install 10.04 Server on an old Dell Poweredge 600SC I had lying around, and I'm having an issue with the installation. I can boot from the disk without any issues, I select a language for the installer, and I get to the main menu (Install Ubuntu Server, Check Disk for defects, Test Memory, etc). When I select Install Ubuntu Server, it waits a couple of seconds and then goes straight to a blank screen. No flashing cursor or anything.
I've tried some digging on the issue and another thread from a while back said to add "vga=771" to the installer line and when I did that, I got an error from my monitor itself complaining about an incompatible video mode.I know I'm not the only one who has had this issue, I just don't know how to address it. This is the first problem I've ever had on an installation.
View 2 Replies
View Related
Oct 22, 2010
Running 2.6.33.3-85.fc13.i686 and just purchased a AGP 7600GT 512 video card. Searched around and found:I did the rpm, yum, sed, mv & dracut as directed. Then I rebooted. When it starts up (all the normal bios messages) and then I 1/2" bar across the bottom of the screen with Fedora 13 on the right end and .... nothing. Just sits there. I've used my Live-13 disk and tried to reverse the procedure but I'm starting to think it's the video drivers.
View 4 Replies
View Related
Jan 20, 2011
I have installed fedora 10 successfully but when reboot the system after installation not initrd or vmlinuz load and display first blue screen and some processing show after this blank screen display and held the system please tell me what should I do? I have reinstall many times but the problem is same.
View 3 Replies
View Related
Jan 26, 2009
I was able to get Fedora 10 to run on VirtualBox. Since the system wouldn't let me set the resolution to anything bigger than 800 x 600, I decided to get the nVidia driver (I'm running the nVidia 8400m G). I did it through this guy's tutorial: [URL]... After rebooting, I see the loading bars and everything, but I get a blank screen with a cursor. After pressing ctrl+alt+F3, I was able to log in to the root and execute the "akmod builds the required kmod on bootup" under the "For GeForce 8 series" [URL]... After a reboot, I still get the same thing. Will I have to reinstall Fedora 10 and just not update the nVidia graphics drivers? I have a 20" monitor that has a resolution of 1600 x 1050 and I would really like to take advantage of that.
View 14 Replies
View Related
May 27, 2009
Im trying to install fedora 10 on the ps3 but i get a blank screen after the media test question, i tested the media in this case the CD and it says it has no errors but when it goes to install it switches to a blank screen and gets stuck. Can anybody help me, or tell me what im doing wrong. Steps that i taken.
1.Download the ppc version of fedora10.
burn the ISO-image using the lowest possible setting.
2. i made a foder in my usb stick called PS3 and inside has another folder called otheros then inside it has the file otheros.bld
3. formatted the ps3 using the xmb. to 10 gigs for the other OS.
4. install Other OS using the usb stick that i made, install successful.
5. switch to other OS, using the XMB through systems settings.
6. Next I see a cd , i click on it with a mouse, see two penguins two options install 32 bit or 64 bit, i choose 64 bit.
7. then i get a media test question , choose skip and loads from CD.
8.Switches to blank screen and nothing else happens.
View 2 Replies
View Related
Jan 9, 2010
So I currently have an install of Karmic running that has been upgraded over the years but I am repartitioning my drives so I did a fresh install on a new drive.
My first problem was the live cd would not boot and I had to use the alternate cd to do the install. It would boot into a blank screen and the i915.modeset=0 kernel parameter did not help.
After the installation finished I went to try and boot and found that right when it went to initialize the graphics, my computer locked up hard. Keyboard unresponsive and all. I read the forums and I tried using the kernel parameter i915.modeset=0 and removed quiet and splash from the kernel line to see if I could spot any errors but nothing appeared.
I am able to boot into recovery mode, and I tried even running an apt-get upgrade to get all my packages up to date and installed the latest nvidia driver but still have this issue.
I'm at a loss as to what I should attempt next.
Here is boot info, just to clarify sda and sdb are a fakeraid on my old setup, sdc is my new install
Boot Info Summary:
View 1 Replies
View Related
Sep 23, 2010
I have installed it from usb as the cd installation failed at the point where you decide which type of installation you want (lamp or samba, etc)the installation completed but when booting nothing happens, only a black screen with a blinking cursor. pressing the shift key or any other keys doesn't work.strangely when i boot from the usb flash drive again (and not from the hard drive) the server does boot and asks for the user name and password!i have chosen the guided lvm partition with 20% reserved for system files.my machine is an athlon xp 2GHz (32bit), 1GB, SATA hard drive, nvidia 6600 graphicsmy guess is that its a problem with grub and lvm.
View 9 Replies
View Related
Mar 19, 2011
I have just installed ubuntu mavericks to an old laptop. I burned a cd and used it to install from. I choose to have the drive wiped and ubuntu installed to it. When I start up all goes well until the end.. I get a blank screen. It is not blank as in black. It has colors you expect to see with ubuntu but there are no controls... just a blank desktop with a cursor
View 9 Replies
View Related
Jun 17, 2011
I installed Umbuntu (MythBuntu 11.04 as backend system) and initially when starting it just went to a blank screen (no prompt, nothing). After going through safe mode I was able to get to a prompt and into the UI in low graphic mode.After updating the graphic drivers (nvidea) to the latest and changing some grub options (GRUB_CMDLINE_LINUX_DEFAULT="acpi=off splash") when I restarted it went to the busybox initramfs prompt. I typed "exit" and the UI started up normally.
The next time I restarted it went through to a blank screen. I typed "exit" again and enter and the UI started up normally again (even though I couldn't see what I was typing at the time).While I was going through the recovery mode I do remember some messages about disk not found/mounted, when I googled it I found stuff about entering rootdelay=90 in menu.lst which doesn't exist anymore. Is there a similar option I can enter somewhere in 11.04?Also I'm new to Ubuntu (in fact any Linux distro as an admin), where would I find any log files that may help with finding the problem.
View 2 Replies
View Related
Jan 20, 2009
I've just got a second-hand computer at a bargain price and I would love to install Fedora 10. I have some previous knowledge on Ubuntu, so I'm not completely new to Linux, but I'm pretty amateur still. Anyway, I have some trouble installing either Fedora or Ubuntu to this machine right now. It has an AMD Sempron 3800+ (2,2 GHz) & an ATI Mobility Radeon X1250. I have the usual "Automatic boot" screen.
Then everything seems to load fine, besides I have an apciphp error. After this single line of error, I have the usual loading bar; and then a blank screen - nothing seems to happen. I saw there were some issues installing Linux on this model - so if you can help me solve this, I'm sure other people will benefit as well!
View 1 Replies
View Related
Oct 26, 2009
I have a fresh install of Fedora 11. All is good except the VNC client. When connected using the client all is fussy or blurred out. The Fedora computer is next to my computer and I can see the movement of the mouse on its screen, but cannot see on VNC viewer. I have tried this from several different computers Windows XP and Windows 2003 and the result is the same.
View 9 Replies
View Related
