I just attempted to upgrade my laptop from F11 to F13 using yum according to the instructions here. Everything seemed to go fine - the download and install took about an hour - but upon reboot it appears that all of my packages are still fc11 packages. It looks like I got the updates in the F11 repos but not an actual upgrade to F13.
View 1 RepliesI was upgrading from 10 to 11 and the laptop battery died during the installation (it was accidentally unplugged). Can I recover or do I need to do a complete install?
View 2 Replies View RelatedI've tried to upgrade my FC8 on Presario F700 series laptop to FC 10 and facing some issues. I've a live CD (i386). Initially i tried upgrading FC 8 to FC 10 and installation was stuck around 30% completion saying its unable to fins libdbi-0.8.3-1.fc9.i386.rpm. Then I tried to install FC 10 from scratch as system went to inconsistent state and faced two issues with two different setup options -
1) when i selected necessary software to be installed for office use and development, it failed after installing 20% saying libgnomeui-devel-2.24.0-2.fc10.i386.rpm
2) i then opted for for software to be installed for office use (default option) then it failed after installing around 50% saying libXrandr-1.2.3-1.fc10.i386.rpm
im trying to understand if this is a problem due to my laptop configuration (AMD Athlon 64 X2 Duel Core) or due to issue with the live CD.
I have an ancient laptop, an IBM T-20 with a Pentium 3 and 250 megs of RAM, which works great for blogging and email. I have used Ubuntu on it for nearly four years now. Last night I upgraded from 8.10 to 9.04 and now it won't get to the log-in screen. The BIOS splash screen appears, then the GRUB screen, then the Ubuntu trademark screen appears, with the horizontal progress indicator scrolling from left to right. And when it gets all the way to the right, the screen goes blank. Then the screen flashes twice, as if it's trying to display in a resolution it doesn't support, and then it goes blank again. The HD activity light flashes about every five seconds and the keyboard is unresponsive.
View 1 Replies View RelatedI upgraded to 10.04 from 9.10 via Update Manager. Upon reboot after the upgrade, I only got as far as the log-on sound and the laptop locked up. Even the power button was unresponsive, so I had to unplug the laptop and let the battery run out to get the thing turned off. I then tried doing a clean install from the CD, but got the same lock-up problem afterwards. I finally had to do a clean reinstallation of 9.10. I am using a Sony PCG-GRT240G Notebook. Are there any steps I can take to get 10.04 to work flawlessly? To get 9.10 to work flawlessly, all I had to do was boot with the noapic parameter.
View 9 Replies View RelatedI tried to use the automatic upgrade to version 10 last night on my Acer Aspire 8930G. Everything seemed to work fine until I got to the reboot. At the reboot it tells me that it is running in low resolution mode because the nvidia drivers have been removed. That is fine except I cannot hit the enter button to accept the message either using the laptop keyboard or by restarting and using a USB keyboard.
I have a dual boot with windows and I'm averse to just reinstalling ubuntu because there is some data which would be annoying to lose.
I had ubuntu 9.10, and every time i turned on my computer it would prompt me to upgrade, so finally i did. I let it upgrade over last night, then finished it this morning. when it went to restart, it turned off fine, but when it came back on, the screen goes through the Gateway first thing where it shows like F10 for boot from etc, and then the screen goes to a black command line looking screen, then it says ubuntu for a second, and then the screen goes black and does nothing. i let it sit for about an hour to see if it was just running slow, but it was still black when i checked it, so now my laptop is useless until i figure something out.
View 3 Replies View RelatedI just used Update Manager to upgrade to 10.4 and all I get is the Ubuntu logo screen with the dots and then the screen goes black and there's no other response. This happened after the upgrade completed installing and I received the message to restart the computer. I have never been able to get it to boot.
I can boot fine by selecting the next older kernal although I do get some messages that I don't understand. It all works so I presume it's OK. The kernal that was installed with the upgrade is 2.6.32-24-generic and I've seen other posts about boot problems with it. The laptop is dual boot with Windows XP and Windows boots normally. I saw a suggestion on another thread about booting into an older kernal and then issuing the sudo update-intramfs -u -k command. I tried it and it didn't help.
Next I tried 2.6.32-24-generic recovery mode and I tried the option to fix damaged packages. It seemed to do something although I saw error messages about not being able to find various software sources. I tried a normal boot afterwards and same problem. Recovery mode has another menu option about repairing grub but I don't want to try that. I'm not a power user and this is all over my head. Before I turn the laptop into an unusable door stop,
Upgrade from netbook remix to desktop/laptop version?
View 3 Replies View RelatedI tried to upgrade from Fedora 8 to Fedora 12, but after preupgrade got everything ready I rebooted. Anaconda searched for storage devices and then said "No upgrade root found". What can i do to continue the upgrade manually?
View 1 Replies View RelatedI have installed Ubuntu 10.10 desktop version on my Lenovo L420 laptop. Now my friend told me that if I had installed laptop version on it then it would have recognized events related to laptop like closing down the laptop screen and all.
Q1. Is there any way by which I can upgrade it to laptop version?
Q2. What are the differences between both?
when I tried to download a installation DVD of F10 for my new thinkPad T500 laptop.The architecture of the processor should be i686 and I downloaded the DVD image Fedora-10-i386-DVD.iso. I understand i686 has backward compatability with i386. But i have following questoins:
(1) why we don't have an installation for i686?
(2) If I install the i386 package, do I get performance downgrades?
(3) Also, why the live DVD has this file called F10-i686-Live.iso?
(4) Finally, I always get message like "Warning: Cannot convert string "nil2" to type FontStruct
/usr/bin/xterm: cannot load font -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso10646-1" when I use X application. What's the problem here? BTW, I used Fedora core 8 before I didnt have this problem.
so i had dual booted my laptop with win 7 and fedora 14 when i reinstalled my win 7 i lost my fedora 14 i don't get the option in which i could select either operating system so does anyone know what is the problem
View 9 Replies View RelatedTrying to do the upgrade through "Software Updates", however because there are no current updates, I cannot click on the "Upgrade" button to begin the upgrade process to FC14.
Is there any other way to do this besides downloading the DVD and installing?
I just installed Fedora 11 on my HP Compaq laptop that had the original factory disk layout (Vista, a big 290GB partition and two other for rescue stuff).
The procedure was the following:
1. I resized the largest partition from 290GB to 270GB using gParted. I could boot normally to Vista after that;
2. Installed Fedora normally using the free 20GB.
After the installation I cannot boot anymore. After the BIOS post the text message shows up:
Non-System disk or disk error replace and strike any key when ready
Did any of you come across this problem before? Is there anything I can do to fix it or at least be able to log into Vista (this is my work laptop...)?
I really want to try it on my Dell E6400 (it runs Fedora 10 right now).
View 14 Replies View Relatedgoing to be putting it on my laptop and wondering what partitions i should have and the sizes. think its a 1gb drive.
View 1 Replies View RelatedI am willing to install fedora 15 in a 32 bit laptop. My laptop has Getforce 9300M nvidia graphics card. I would like to know if there is any automatic way to install the graphics driver with fedora 15. If yes please provide me the information.
Why i am interested to know is that previously when i was using a earlier version of fedora11 i guess, people in the forum suggested me to download the driver from the nvidia site and install it. It was really painful to install the driver in that way.
I'm trying to install Fedorad 9 on my windows Vista dell xps laptop in a seperate partition. I can't seem to make my laptop boot off of the DVD i'm burning the Fedora ISO to. I'm just using Windows, not Nero or anything like that. I've changed the boot options in setup, burned the ISO to the DVD and rebooted but I end up in Windows. By the way, should I just go ahead and use Fedora 10 as a new user or has it been "debugged"? I don't need any additional "new version" problems at this point.
View 2 Replies View RelatedI took a perfectly functioning Fedora 10 install on my Dell D410 laptop and did "yum update" on it. Now when it boots, all I get is POST and then the single word "GRUB" on the screen. What'd I do? How do I recover?
View 3 Replies View RelatedI have an Thosiba Laptop, with an Seagate 100 GB SATA Hard Disk. I have installed Windows XP and Red Hat on my laptop, and all works fine. I want to remove Windows and Red Hat from the Laptop and only use Fedora, but when I am trying to install Fedora the installation wizard can not detect th SATA Hard Disk. My Red Had sees the HDD as:
[code]...
I am upgrading my old 40G hard drive to a new 160G one and want to know the best way to set it for use with my system. I currently have a Windows partition which I want to keep & reinstate onto the new drive. Then I want to have another 3 partitions for different distros.
What should I do as a first step when I put the drive in boot off a live CD. I am assuming that I will need to do. If I do a, # grub-install, will this then format the MBR and then create a small partition for /boot. Following that, do I just restore the Windows partition immediately after the /boot partition, and then create new partitions for the distros accordingly.
I would also like to create a seperate swap partition and then install F10. Is there an option in Anaconda to not use LVM (can't remember).
i am trying to get F12 running on my Dell D600 laptop and am having some SERIOUS networking issues.
i had F11 running, but the upgrade process was FUBAR'd and doesn't work so i had to do a clean installation. upon finishing that, i now have no network connectivity.
i try connecting an ethernet cable to eth0 (LAN connection), no connection. i try connecting to my wireless network using wlan0, no connection
i turn off network manager, try adding them manually same thing.
how the frick do i get this thing to connect to the world?
Edit: p.s. the only connection that i've been able to get so far is some halfway connection to my wireless, but it puts me on the 10.x.x.x subnet, and my entire internal network is on 192.168.1.x.
Edit: one other thing, every time i make changes and reboot it tells me to log into system-config-network as root and make further changes
My laptop died while installing F12, without completing installation. Now I can not boot the computer from HD, CD, or USB. I have flashed the BIOS with the most recent ROM. I can access the BIOS setup and exhausted all my options there, which is mainly boot order. At the moment, the boot process goes to a blinking cursor and does not allow for input. The laptop in question is a lenovo Y510 that was previously running F10 with a single partition.
View 2 Replies View Relatedmy laptop windows 7 64-bit intel core i5,4GB ddr3 RAM 500GB HDD. hard Drive partion -- c-drive:150GB D-Drive:150 GB remaing 160 GB not allocated but when i install fedora 12 . it says create boot/efi partion, root partion i dont get it
View 7 Replies View Related1. Unable to install F 13 on my laptop using the fedora live usb i had. It worked from the Live CD though, but the 3d effects don't work.
2. Does F 14 have native support for NVIDIA 5100m card? This is the card present on my laptop its based of the Quadro 880 chip
I meddled a bit with the PAE kernel and tried to install the driver off the nvidia website and now the system does even boot..
I want to replace the Ubuntu with Fedora in my laptop(model:hp EliteBook 8540W). After I opened the machine, the status is as follows:
[Code]....
I have some questions about installation:
1) How to partition space for Fedora? (this space is 128GB occupied by Ubuntu currently). Maybe I cannot use Gparted to partition. Will it influence windows system after partition? (because the windows loader is on /dev/sda1)
2) Do I need replace Ubuntu's grub2 bootloader with installing Fedora's grub? How to do?
3) Can you introduce me all the steps in detailed before installation? Because I can not
I just got my brand new shiny Dell XPS L502X laptop today and planned to do a dual-boot installation between Win 7 and F15. Win 7 went great but I can't even get the 64-bit Live DVD of F15 to load. The splash screen always hangs while the bar loads, but if I push ESC so I can see what's going on in the background, I get a whole lot of different error messages and the last message is "fixing recursive fault but reboot is needed." What I get is nearly identical to what I found in this post. I've already tried the usual kernel options that have always worked for me in the past, such as noapic, noacpi, and nomodeset. However, the Live DVD still won't boot. There's got to be a way to install this. Any ideas?
View 1 Replies View RelatedOne of my two laptops is a P-III at 800 mhz and 1 Gig memory running Ubuntu 8.04.This runs very well.I'd like to upgrade to 10.04 LTS because I like to stay current with the LTS releases but I wonder if maybe it will run too slow on this old computer.
1. Upgrade to 10.04 ?
2. Change over to Lubuntu 10.04 ?
3. Or just stick with 8.04 figuring it works and this laptop is too slow for something newer
I've tested both Ubuntu 10.04 and Lubuntu 10.04 from Live CDs but with a lot of CD I/O it's hard to judge whether these would run satisfactorily from the hard drive. Unfortunately the hard drive does not have sufficient space to co-install 10.04 with 8.04 for a parallel test.
I tried to install fedora 12 in my old dell laptop LATITUDE D800. In first boot I get the black screen with
localhost login:
I see several discussions regarding this issues, but I could not resolve the problem. For example, I cannot find system-config-display. This is a fresh installation and there are no other OS in my hard disc.