Fedora Installation :: 10 Upgrade / Installation Failing On Presario F700 Laptop
May 29, 2009
I've tried to upgrade my FC8 on Presario F700 series laptop to FC 10 and facing some issues. I've a live CD (i386). Initially i tried upgrading FC 8 to FC 10 and installation was stuck around 30% completion saying its unable to fins libdbi-0.8.3-1.fc9.i386.rpm. Then I tried to install FC 10 from scratch as system went to inconsistent state and faced two issues with two different setup options -
1) when i selected necessary software to be installed for office use and development, it failed after installing 20% saying libgnomeui-devel-2.24.0-2.fc10.i386.rpm
2) i then opted for for software to be installed for office use (default option) then it failed after installing around 50% saying libXrandr-1.2.3-1.fc10.i386.rpm
im trying to understand if this is a problem due to my laptop configuration (AMD Athlon 64 X2 Duel Core) or due to issue with the live CD.
View 3 Replies
ADVERTISEMENT
Feb 16, 2011
I made a clean install of Ubunto 10.10 on my Compaq Presarion F700, nVida graphics, AMD Turion 64x2.Installation was fine.When I boot, it takes a lot of time, 5 minutes or more.Also, after the system loads I get those applet errors I've attached. Sometimes I get all the applet errors and sometimes it get few of them.I tried several configs of "GRUB_CMDLINE_LINUX_DEFAULT" but still no luck.
View 2 Replies
View Related
Jun 16, 2011
I'm trying to install Lubuntu 11.04 CD on a Compaq Presario M2000 Laptop to replace XP.
Processor: Intel Pentium Celeron M
RAM: 256mb
Existing O/S XP SP3 (boots & runs but is very slow)
Hard Drive 40GB (28Gb free)
Installation hangs about 1 minute after selecting language in both try Lubuntu & install Lubuntu modes. Have also left the laptop running all night to see if it was just a slow install. Have tried various other disks (Xbuntu, Puppy, Mint, Lubuntu 10.04), which have worked on other PC/laptops ok, but all stall after the language settings. Have tried burning the Lunbuntu iso with both Windows & Ubuntu at slow speeds & have verified the burnt iso. The laptop BIOS cannot be set to boot from usb, so an external CD or USB stick installation may not work? The BIOS has been updated to the latest one on the Compaq web site this morning. Although I have installed a few flavours of Linux on various hardware, I'm still a real Linux newbie. Can Lubuntu be installed within Windows, but still format the hard drive to ext2/3 ?
View 1 Replies
View Related
Jun 16, 2010
I just attempted to upgrade my laptop from F11 to F13 using yum according to the instructions here. Everything seemed to go fine - the download and install took about an hour - but upon reboot it appears that all of my packages are still fc11 packages. It looks like I got the updates in the F11 repos but not an actual upgrade to F13.
View 1 Replies
View Related
Apr 28, 2011
Trying to upgrade from 10.10 to 11.04 but it keeps giving me errors... such as:
An unresolvable problem occurred while calculating the upgrade.
Please report this bug against the 'update-manager' package and include the following error message:
I've attached a gzipped copy of my dist-upgrade folder, anybody have any ideas what's going on?
View 3 Replies
View Related
Jul 14, 2009
I was upgrading from 10 to 11 and the laptop battery died during the installation (it was accidentally unplugged). Can I recover or do I need to do a complete install?
View 2 Replies
View Related
May 4, 2010
I'm trying to upgrade my 9.10 desktop to 10.04, and it is failing to fetch the following two packages:
[URL]
I've made sure everything is patched current prior to the upgrade and have tried clearing out the contents of /var/cache/apt/archives/partial first as well to no avail.
View 3 Replies
View Related
Nov 21, 2010
I have upgraded this system 3 or 4 times from Lucid to Meerkat without any problems. After a nasty update to my Natty installation I have re-installed Lucid and am upgrading to Meerkat, then on to Natty again. However when I try to upgrade I am getting the error below.
Code:
2010-11-21 14:01:39,632 DEBUG running doUpdate() (showErrors=True)
2010-11-21 14:01:40,265 DEBUG openCache()
2010-11-21 14:01:40,265 DEBUG failed to SystemUnLock() (E:Not locked)
[code]....
View 9 Replies
View Related
Mar 20, 2009
How to make run modem on laptop Compaq Presario C700? Modem is HDAUDIO Soft Data Fax with SmartCP com3.
View 4 Replies
View Related
May 4, 2010
7 months using Linux , 2 months in this Forum. I'm searching for answers too long. My vga card crashes to a black screen with 178 and 183 drivers searching and executing threads for this problem does not fix nada.
Quote:
01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9200M GS] (rev a1)
Problem with update 2.6.31-21 gives
Quote:
W: Failed to fetch http://ppa.launchpad.net/user/ppa/ub...86/Packages.gz 404 Not Found
My upgrade gives:
[Code]...
View 9 Replies
View Related
Mar 9, 2009
I've burned the installation media on several different types of media, and i'm getting an error after the 3 bars load (first screen). I've tried the verify and boot option, and it's fine. I'm trying Fedora 10 on a studio xps 1340. The error messageet isCE hpet increasing min_delta_ns to xxxxx nsec twice, thenForce XPAon: 0about 15 times, thenCE hpet increasing min_delta_ns to xxxxx nsec a few more times, this pattern alternates and the xxxxx keeps increasing, starting at something like 10000 and jumping by 50000 each time it reposts.
View 14 Replies
View Related
Sep 1, 2009
Skype doesn't recognise my plugged in mic and earphones. I can hear sound through the headphones from other programs. DVD burner burnt a cd for me, but seemed to pause at around 15-20% and sat there for half an hour. When I ejected CD it jumped to 100% stating it had finished. The CD was a Live Install CD for Ubuntu, which didn't work. I get I/O errors when trying to install from CD on start up. I'm guessing it didn't burn properly or isn't being read properly. I'm generally unsure of what drivers are installed for all of my hardware. Not sure if there is an auto-detection program in or for Fedora that can help, or if I will have to stop being lazy. Skype, like mentioned before. I'm not sure if this is a software issue or driver issue.
Mozilla failing to open. When clicking on the Firefox icon it wouldn't start. Shows an icon at bottom of monitor on toolbar, but disappears after 5-10 seconds with no browser opening. I had recently installed a VLC player with plugin for Mozilla while logged in as root. Wondering if I messed this one up myself? I stumbled onto updates and it had Mozilla install in there. It works again. I'm sure it won't be reoccurrent. If I were to post system specs and issues I'm having, would someone on this forum be willing to guide me through or point me in the direction of having my laptop fully operational? All drivers basically. It works as is, just not completely
View 7 Replies
View Related
Feb 11, 2010
I have an ancient laptop, an IBM T-20 with a Pentium 3 and 250 megs of RAM, which works great for blogging and email. I have used Ubuntu on it for nearly four years now. Last night I upgraded from 8.10 to 9.04 and now it won't get to the log-in screen. The BIOS splash screen appears, then the GRUB screen, then the Ubuntu trademark screen appears, with the horizontal progress indicator scrolling from left to right. And when it gets all the way to the right, the screen goes blank. Then the screen flashes twice, as if it's trying to display in a resolution it doesn't support, and then it goes blank again. The HD activity light flashes about every five seconds and the keyboard is unresponsive.
View 1 Replies
View Related
May 1, 2010
I upgraded to 10.04 from 9.10 via Update Manager. Upon reboot after the upgrade, I only got as far as the log-on sound and the laptop locked up. Even the power button was unresponsive, so I had to unplug the laptop and let the battery run out to get the thing turned off. I then tried doing a clean install from the CD, but got the same lock-up problem afterwards. I finally had to do a clean reinstallation of 9.10. I am using a Sony PCG-GRT240G Notebook. Are there any steps I can take to get 10.04 to work flawlessly? To get 9.10 to work flawlessly, all I had to do was boot with the noapic parameter.
View 9 Replies
View Related
Feb 11, 2010
I am running Live 12 on my CD rom drive of my dying laptop. I have a major Windows registry error on that system and am working to recover my files. I have successfully moved a couple of folders from the laptop to my Seagate Free Agent Drive as a test.What I would like to know is, is there a way to copy my files and folders without literally dragging and dropping each one? We're talking 140 G of folders....sigh.
View 1 Replies
View Related
Mar 12, 2009
I installed Fedora 10 on an 8 GB USB-stick using the creator-software for windows. Sadly I am not so familiar with linux but as I am now trying Fedora on a friend's advice I really start to like it
Unfortunatels there ist a problem: I wanted to compile a driver for my wlan-card but got the known error "make: command not found". So I searched this forum and found in this thread that I need to install the development tools. But when I try to do so by typing yum groupinstall "Development Tools" it first starts but then cancels with an error message claiming missing dependencies to a perl package:
Quote:
Fehler: Fehlende Abh�ngigkeit: perl = 4:5.10.0-49.fc10 wird ben�tigt von Paket 1erl-Pod-Escapes-1.04-49.fc10.i386 (installed)
Due to my ignorance I tried yum install perl but this also fails with the same error message I am sure it is just a bite for you but I don't hava a clue right now By the way I already can call the command make install now for the wlan-card driver. It also starts but fails and says:
View 9 Replies
View Related
May 16, 2010
I tried to use the automatic upgrade to version 10 last night on my Acer Aspire 8930G. Everything seemed to work fine until I got to the reboot. At the reboot it tells me that it is running in low resolution mode because the nvidia drivers have been removed. That is fine except I cannot hit the enter button to accept the message either using the laptop keyboard or by restarting and using a USB keyboard.
I have a dual boot with windows and I'm averse to just reinstalling ubuntu because there is some data which would be annoying to lose.
View 9 Replies
View Related
May 16, 2010
I had ubuntu 9.10, and every time i turned on my computer it would prompt me to upgrade, so finally i did. I let it upgrade over last night, then finished it this morning. when it went to restart, it turned off fine, but when it came back on, the screen goes through the Gateway first thing where it shows like F10 for boot from etc, and then the screen goes to a black command line looking screen, then it says ubuntu for a second, and then the screen goes black and does nothing. i let it sit for about an hour to see if it was just running slow, but it was still black when i checked it, so now my laptop is useless until i figure something out.
View 3 Replies
View Related
Sep 12, 2010
I just used Update Manager to upgrade to 10.4 and all I get is the Ubuntu logo screen with the dots and then the screen goes black and there's no other response. This happened after the upgrade completed installing and I received the message to restart the computer. I have never been able to get it to boot.
I can boot fine by selecting the next older kernal although I do get some messages that I don't understand. It all works so I presume it's OK. The kernal that was installed with the upgrade is 2.6.32-24-generic and I've seen other posts about boot problems with it. The laptop is dual boot with Windows XP and Windows boots normally. I saw a suggestion on another thread about booting into an older kernal and then issuing the sudo update-intramfs -u -k command. I tried it and it didn't help.
Next I tried 2.6.32-24-generic recovery mode and I tried the option to fix damaged packages. It seemed to do something although I saw error messages about not being able to find various software sources. I tried a normal boot afterwards and same problem. Recovery mode has another menu option about repairing grub but I don't want to try that. I'm not a power user and this is all over my head. Before I turn the laptop into an unusable door stop,
View 1 Replies
View Related
Feb 28, 2010
I was given an old Compaq Presario computer; it had a 3.2GB hard drive with windoze 98 (put your crucifixes down, please) and a somewhat broken CD drive. I replaced the CD with a spare DVD ROM and the hard drive was replaced with a spare 250GB. I also removed the old ISA Fax/modem and installed a PCI network card. On top of this I also burned a copy of Xubuntu 8.04 on my main PC, for loading onto the old timer.
But then I came to use the old machine, the BIOS recognised the new DVD ROM, but no menu appeared, just the word "COMPAQ", any attempt to access the BIOS met with no response, (would not respond to "Del" or "Esc" or any of the "F" keys) the PC then attempts to boot from the hard drive (it had an old version of, what I think may be Ubuntu, as it comes up with a GRUB error 1!
I did notice the DVD ROM drive's light flash during the boot sequence. how to access the BIOS?It would be a shame for me to throw this old PC out! (I could always salvage the parts, I have 2 other motherboards and cases ready to make up some more computers, making 5 computers in my network)
View 2 Replies
View Related
Jul 13, 2010
I tried installing the xubuntu desktop edition on my presario 2202AL laptop(celeron 1.4GHz,256MB RAM). It started and then got hung up.
i even tried a direct upgrade from the earlier 9.10, but the upgrade was ok downloaded and installed all, but after reboot it hung up with startup screen.
View 3 Replies
View Related
Oct 20, 2010
After using Ubuntu for a while I have decided I wanted to do a fresh install onto my PC, however being rather old it (about 6 years old), It seems I cannot get any recent kernels to run on the system. As such, I cannot get the live CD to boot. After searching for hours to find a solution I have found nothing.
Upgrading also breaks the system as well, So to do so wouldn't work.[URL].. with addition of a 256MB RAM chip and starting with a 512 rather then the 256 stated on the page. and a ATI Radeon 9800.
Is there anyway I can get newer kernels/Live CD to boot? I've tried all options i've found in other threads but no go.
View 1 Replies
View Related
Apr 2, 2009
when I tried to download a installation DVD of F10 for my new thinkPad T500 laptop.The architecture of the processor should be i686 and I downloaded the DVD image Fedora-10-i386-DVD.iso. I understand i686 has backward compatability with i386. But i have following questoins:
(1) why we don't have an installation for i686?
(2) If I install the i386 package, do I get performance downgrades?
(3) Also, why the live DVD has this file called F10-i686-Live.iso?
(4) Finally, I always get message like "Warning: Cannot convert string "nil2" to type FontStruct
/usr/bin/xterm: cannot load font -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso10646-1" when I use X application. What's the problem here? BTW, I used Fedora core 8 before I didnt have this problem.
View 3 Replies
View Related
Jan 14, 2011
Upgrade from netbook remix to desktop/laptop version?
View 3 Replies
View Related
Jun 20, 2011
New member here. Was introduced to Ubuntu by the IT guy at my last place of work and liked it so much, I ran WUBI on my laptop for a couple of months before taking the plunge and today fully converting my Compaq Presario CQ56 Laptop to the full Ubuntu OS.
The only issue I have is I have no sound whatsoever. I have seen some suggestions where you should check the hardware drivers and when I do that the only driver that appears is for ATI/AMD proprietary FGLRX graphics driver. It also says this driver is active and currently in use.
So, can anyone else offer some help. I love the system and the way it does everything but it needs sound. Incidentally when I ran WUBI (while Windows 7 was on there) I did not have a problem with the sound!
View 2 Replies
View Related
Jun 19, 2010
I'm aware of the issues of the ACPI that Toshiba laptops have...
Unfortunately I found out after I bought the laptop.
Auto-boot initiates, and then the screen freezes with this text:
View 10 Replies
View Related
May 10, 2011
Last year, I bought a Presario CQ62-225NR running 64 bit Windows 7 Home Premium. With the recent release of Natty, Ive decided to take the plunge and try out the Unity interface. In preparing the hard drive for dual booting Ubuntu, I shrunk the C: Windows partition using Disk Manager and deleted the D: RECOVERY partition.
The 200mb hidden SYSTEM boot partition and the 100mb E: HP_TOOLS partition were untouched.
So far so good. I now have an unallocated block of free space roughly 140 GB in size between the Windows Partition and HP_TOOLS partition. Disk Management shows the three remaining partitions to be healthy.
However, after I boot into the Gparted live-CD, Im presented with a small mess. Every partition is lite up with caution signs. A new partition that doesnt appear under Disk Manager has popped up out of nowhere. And all the labels have now been shifted.
In short, before partitioning:
/dev/sda1; ntfs; SYSTEM; 199mb; boot
/dev/sda2; ntfs; [no label]; 286.29gb
/dev/sda3; ntfs; RECOVERY; 11.5gb
/dev/sda4; fat32; HP_TOOLS
[Code].....
I took the precaution of saving a disk image with Clonezilla before starting this adventure. Though the computer can run Windows just fine right now, I may choose to find out soon if the stored image can properly restore everything. Then Ill have another go at repartitioning the HD to get Ubuntu installed. how to avoid the same results?
View 9 Replies
View Related
Sep 12, 2010
I installed Ubuntu 10.4 on my laptop compaq presario CQ50 I cannot go online, because the drivers does not exist ? where can I download them? the wireless flash blue by the way, and it was working before I switch to Linux is there anyway to find driver for my wireless compatible?
View 5 Replies
View Related
May 13, 2010
I have a Compaq Presario CQ60 laptop and have one of those wireless light indicators. For me the light glows orange when the wireless is OFF and blue when the wireless is ON. In Ubuntu 9.10 (Karmic) the light was always orange, even if the Wireless was on, but my wireless worked right out of the box so I was grateful for that, but since upgrading to Ubuntu 10.04 (Lucid) I've noticed that my wireless light alternates between orange and blue frequently and sometimes flashes madly when wireless activity is occurring.
I was wondering if there is a fix for this as it can get quite annoying, the light sometimes stays blue for a while but will ultimately keep going back to orange and vice-versa, my friend who also has a Compaq Presario CQ61 (Revised model of mine) has his wireless light constantly blinking orange and blue no matter what.The wireless itself works fine, I can connect to any wireless connection and use it without having to install anything else, so it does work out of the box, which again, I'm grateful for.The wireless adapter is a Atheros AR5001 Wireless network adapter. Do I need to install additional packages or drivers to get the wireless adapter to work properly?
View 9 Replies
View Related
Jun 17, 2009
I try to install Fedora 11 from DVD BUT after installation system is not booting. Windows XP is a 1st OS is already installed in my system.
View 1 Replies
View Related
