I took a perfectly functioning Fedora 10 install on my Dell D410 laptop and did "yum update" on it. Now when it boots, all I get is POST and then the single word "GRUB" on the screen. What'd I do? How do I recover?
View 3 RepliesI'm a little bit stuck and in need of advice from people who know what they're talking about. I've had Ubuntu on my office PC, home PC and laptop for about a year now and never had a problem that I couldn't solve, until now. I'd not turned my laptop (Lenovo N 500 with Ubuntu 9.10 64 Bit using GRUB2) on for about a month so when I did on Monday of this week I noticed that I'd not updated Ubuntu for 27 days, so ran the update manager. After everything was updated I carried on using it as normal but when I tried to turn it on yesterday I get the following issue...
GRUB loads and gives me all the possible boot options. Whatever one I choose, I get the same results. It starts to boot (I see the black screen with the white Ubuntu logo) but this remains on the screen for a very long time, then it goes to a flashing cursor at the top left of the screen and it just sits there indefinitely.
I've tried playing with Super GRUB Disc but admittedly I'm not too sure what I'm doing with it. I've tried using the Ubuntu Installation disc as a Live CD too but with no joy. The main HDD appears fine when in Live CD mode, all my files are there etc.. Is this actually a GRUB issue or something else? It's like GRUB's doing its bit and then it's failing slightly further down the line.
I'm totally out of my depth here and really don't want to have to reinstall everything, I'm sure there's a simply solution.
I just installed Fedora 11 on my HP Compaq laptop that had the original factory disk layout (Vista, a big 290GB partition and two other for rescue stuff).
The procedure was the following:
1. I resized the largest partition from 290GB to 270GB using gParted. I could boot normally to Vista after that;
2. Installed Fedora normally using the free 20GB.
After the installation I cannot boot anymore. After the BIOS post the text message shows up:
Non-System disk or disk error replace and strike any key when ready
Did any of you come across this problem before? Is there anything I can do to fix it or at least be able to log into Vista (this is my work laptop...)?
I'm trying to install Fedorad 9 on my windows Vista dell xps laptop in a seperate partition. I can't seem to make my laptop boot off of the DVD i'm burning the Fedora ISO to. I'm just using Windows, not Nero or anything like that. I've changed the boot options in setup, burned the ISO to the DVD and rebooted but I end up in Windows. By the way, should I just go ahead and use Fedora 10 as a new user or has it been "debugged"? I don't need any additional "new version" problems at this point.
View 2 Replies View RelatedMy laptop died while installing F12, without completing installation. Now I can not boot the computer from HD, CD, or USB. I have flashed the BIOS with the most recent ROM. I can access the BIOS setup and exhausted all my options there, which is mainly boot order. At the moment, the boot process goes to a blinking cursor and does not allow for input. The laptop in question is a lenovo Y510 that was previously running F10 with a single partition.
View 2 Replies View RelatedI tried to install fedora 12 in my old dell laptop LATITUDE D800. In first boot I get the black screen with
localhost login:
I see several discussions regarding this issues, but I could not resolve the problem. For example, I cannot find system-config-display. This is a fresh installation and there are no other OS in my hard disc.
I installed an update on my Dell D800 last night and now it won't boot. Attaching a pic of the screen. I'm sure I have not included enough info
View 7 Replies View RelatedI have successfully installed Fedora 12 today on a Dell M6400 from a live usb stick. Everything went very well. After the installation I rebooted, and updated the system. Then rebooted again, and now I get this message. No bootable partition in table. Apparently something in the update is broken... Is there a buggy kernel version I should be aware of? Should mention that I have two disks in a hardware raid 1. I left a none-bootable USB key in the computer when rebooting.
View 1 Replies View RelatedI was having problems performing an update yesterday that failed on dovecot dependancies and after a few tries I removed dovecote (it wasn't being used) from the installation and tried again. Everything seemed to be going OK then the update (about 160MB) hung and the screen went black a few times and I think then shutdown automatically. The PC then fails to reboot and displayes the message "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)" I have tried to get the PC to boot with the super grub disc but without success (probably my in experience) I have also tried a suggestion from one of the forums to start the PC with a live CD and typed su -c 'grub-install /dev/sda at the terminal again without sucess. I have looked at the files with the live CD there are grub, menu and kernel files there (some are in lost + found, b ut don't know wheer these should be so have not changed anything.
Is there an easy way for the in-experienced to repair the boot process ?
The PC is a pentium 4 running Fedora 13
There is a 200MB boot partition formated as Ext3
and a 19GB partition formated as a LVM with Ext4
There is a CD drive but no DVD
Everything has worked OK for the past year through two online upgrades.
I decided to update all the software on my computer. Fortunately, it upgraded kernel version 3.14 to 3.16. I was happy to learn that suspend now worked on my laptop by calling pm-suspend, but it did not worked by closing the lid. So I search and found on debian's website that installing systemd and adding some config lines in /etc/systemd/logind.conf would sove the issue. So I followed the procedure and did like instructed, to end up with a computer that boots on black screen.
The last verbrose line I see on boot up is "kvm disabled by bios" and then it shutdown down the screen. The computer works, as I can login and shutdown by doing those operation blindly.
I tried removing systemd but it still does not work. If I use the old kernel 3.14 I can boot without any problem, but if I use kernel 3.16, I boot to a black screen. I remember successfully booting in 3.16 before installing systemd.
I have recently updated my Fedora 11 installation which replaced my older 167 kernel with the newer 217 kernel. However, the 217 kernel will not boot completely. It will show the splash loading screen, and then will switch to a rapidly blinking cursor. This cursor blinks for about 5 seconds and then disappears. I can access terminals using ALT+F2, etc. I can log in to these terminals, but init commands do not complete (something about a binary handler). I'm not sure if something is conflicting with an update to X or what is wrong. The most recent kernel that I managed to get to work was Kernel 167, however I cannot find this kernel for download.
Sys info:
AMD Athlon 64 X2 4800+
3GB RAM
nVidia GeForce 8600GT with proprietary drivers
320GB Hard Disk with windows and linux partitions
Fedora 11 32-bit i586
Just finished a security update, (Fedora 12) and it said I had to restart the computer to have it take effect. When I restarted, all I got was the "Compaq" logo....forever. No Grub2 (it's a three system set up), no bios, just the brand name of the box. Even worse, when I tried going at it with a live cd, the same thing; the bios never loads, so no live cd fix.
View 6 Replies View RelatedHello, i recently update the kernel in fedora through the GUI update manager and after restarting the new kernel wouldn't boot and i had to reboot into the old one. it freezes right after Plymouth finishes and the login screen should show up it just completely freezes, i do have proprietary nvidia drivers could it be that?
View 9 Replies View RelatedTried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
Have had a clean perfectly working copy of 2.6.31.6-166 for months and after two updates to 2.6.31.12-174.2.3 and 2.6.31.12-174.2.19, neither of the newer kernel versions will allow machine to boot properly. Start-up hangs at the preload daemon with a flickering screen. To use machine, must use grub chooser and choose the original base kernel.
Running on Tyan h2000m board, opteron 2356, Nvidia 9800 GTX+ and 12GB of dram with SELinux security enabled.
Finally updates are broken - I've been able to use my upgraded F12 system for some time, faithfully keeping up with f10, then f11. Just yesterday it finally broke:
Test Transaction Errors: installing package kernel-2.6.31.12-174.2.22.fc12.i686 needs 10MB on the /boot filesystem
It would appear that the most recent kernel update has broken the 10MB barrier initially set by the version I first installed (for the boot partition). Needless to say, I have quite an investment in this machine, and of course no time to back it all up and do a fresh F12 install. I am hoping someone out there can give me a bulletproof way to steal some space and expand the boot partition...
I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
I run an update of ubuntu 9.10 on my laptop and now my mpi programs do not work anymore... The error is
[florian-laptop:02935] [[INVALID],INVALID] ORTE_ERROR_LOG: A system-required executable either could not be found or was not executable by this user in file ../../../../../../orte/mca/ess/singleton/ess_singleton_module.c at line 269 [florian-laptop:02935] [[INVALID],INVALID] ORTE_ERROR_LOG: A system-required executable either could not be found or was not executable by this user in file ../../../../../
[Code]...
Problem surfaced roughly 2 days ago (March 6th, 2010). When laptop lid is closed, and then opened, the screen remains black. Hard reboot is usually needed. Problem occurs when behavior setting is set to close laptop lid -> suspend, and also when setting is set to close laptop lid -> blank screen. I haven't tested under other settings.
Expected behavior: gnome login prompt appears. Please note that the expected behavior occurred consistently until a few days ago. Additional details:
Intel driver.
Fedora 12.
GNOME.
Thinkpad T60.
I installed REL 5.5 on this Dell laptop (originally win 7) and everything works ok except when i get to the login GUI the LCD brightness (or lack of) sets to it's lowest so i have to click the f5 button to brighten the screen. If I log out, the LCD resets to the dimmest setting (can hardly make out the login GUI) and again I have to click on f5. I believe I need to update the BIOS but I don't know how. The BIOS update I dound on-line if a xxx.exe file.
View 1 Replies View RelatedI have a Dell Laptop C640 Latitude that locks up with in a min or two of booting up after I update from 09.04 to 09.10 or if I do a clean install of 04.10. I do not know if it is the laptop or the 09.10 that is doing it.
View 3 Replies View RelatedIf I would like to update my kernel to linux 2.6.34 on my asus eee 1001px laptop. How can I do that in the easiest way? I already downloaded the kernel from kernel.org.
View 7 Replies View RelatedI just installed 10.04 on an Acer 4736 laptop and was prompted for a software update of about 170 MB.
I went through with the update downloads and installation, got an error message of some packages not being found, and clicked on the "close" button on the dialogue to finish with the whole thing.
Now the Update Manager window with the grayed-out package updates didn't go away, and the cursor would always show the "busy" circle thing. I waited for a while, but nothing happened. I tried opening Firefox to check for anything about this on the net, but it wouldn't open.
So I left it alone, and it the screen went black (screensaver, I guess). When I tried to get back to the desktop, I couldn't. Screen wouldn't respond and it stayed black; no password prompt or anything.
Ctrl-Alt-Backspace wouldn't take me back to the login screen either.
I'm a complete an utter newbie on this forum, and indeed to linux/ubuntu in general so pardon me in advance if some of my question makes no sense/sounds silly/makes you want to exterminate all noobs. Basically, I've had bad experiences (i.e. had to use my recovery system) trying to install a dual boot system with OpenSuse and want to get some sound advice before I proceed with installing Ubuntu, instead of having to go through the agony of formatting and recovering Vista HP again, and consequently trying to teach it all over again how to suck less.
Okay, so less waffle and more questioning. Background information is that the laptop is a Compaq F560. It has at present Win Vista 32 HP on the primary partition (C), with a recovery partition on (D). It has a very basic, almost un-alterable BIOS, 1.5Gb of RAM, 120Gb HD, standard CD rom, integral nVidia 6100m graphics card, a broadcom wireless network adaptor and various other bits n' bobs.
When installing OpenSuse last time I found 2 huge flaws with my method. First one is, that I didn't have wired networking available to me at the time, and foolishly forgot to get hold of the wireless adaptor drivers before installing Suse. No biggy you say, just go back to windows and download from there. Great, except I'd bozzed up the MBR too, so couldn't do that. Suse, for it's part, ran fine. Very smooth. I just couldn't do anything with it.
What I'm now looking to do, is give Ubuntu a shot, as part of a dual boot system, with Vista on the other half. I want to make vista the default boot system. I DONT want to have to go through my compaq's recovery system again, if possible. To meet these objectives, Ultimately, I'd like to transfer all of my operations across to Ubuntu, but I'm too windows-dependent at the moment, though some sort of windows-emulator wouldn't be a bad idea if anyone knows where/how/what.
I have been working on this for 2 days and I am ready give this one up!! I have an old 'hp omnibook 6000' It's an Intel mother board. I believe it has 4 or 5 GB hard drive. 512 RAM, put that in myself. I can load live-cd's and all is good. I have tried: Xubuntu-alternate 7.04 and the desktop cd. Puppy Linux loaded up ok and all was working. Dam Small Linux loaded ok. Each time I reboot after install of mentioned os, all I get is a flashing cursor upon reboot. I know each one installed as gparted has shown me. When I install I 'erase and use entire disk'.
View 2 Replies View RelatedI just recently bought a Toshiba L505-ES5033 and can not get ubuntu (or fedora 12 32 or 64) to boot from the live cd, or install. I can get to the initial menu that asks me if I want to try without changes and all that but from that point nothing really. If I choose any options other than the help option it runs through some scripts and gives me an error. The error refuses to stay on the screen despite my constant demands that it does; all I THINK I can make out is MIRR... configuration error. Fedora tells me something entirely different. After this error it goes to a faded black screen and I can hear my HDD making angry sounds.
View 1 Replies View RelatedSince my wife just bought a new laptop I decided to polish her old (decrepit) machine a little and let my daughter have it. It was dual partitioned XP and Ubuntu 8.04 (which worked flawlessly). I figured that since it was older I'd load Xubuntu. I made a DVD of Xubuntu 10.04 that passed checksum. When I tried to boot from the DVD I got as far as the menu asking me if I wanted to boot from the DVD, install from the DVD, etc. Whatever I picked the machine seemed to think a while, then hang on a black screen.
So, I got an Ubuntu 10.04 CD from a book I'd just bought, and tried that. It behaved identically- after the option menu whether I tried to boot from CD or install, it hung on a black screen. So, I booted 8.04, and fired up the Update Manager, and loaded all recommended updates (as is generally my habit). Then I clicked the button to update to 10.04, all of which progressed as expected over the course of a few hours, until the reboot. At this point it did the same thing! GRUB loads, and I pick Ubuntu 10.04, then I get the word "Ubuntu" in the middle of the screen with several dots under it (the boot splash?) for a split second, then it hangs on a black screen.
If I boot Ubuntu 10.04 in recovery mode that DOES seem to work, and I get a command prompt. But fixing this via command prompt is WAY beyond my weak Ubuntu kung-fu.
The machine is:
Averatec 1000 series
Intel Celeron (R)M 1.00GHz
504MB RAM
Intel(R) 82852/82855 GM/GME graphics controller
Which seems to meet minimum system requirements.
Oh, and XP SP3 boots just fine.
But I'd be happy if I could single-install some version of Ubuntu, and screw the dual-boot capability with XP, if that makes any difference.
I tested a month ago with my bro's PC and really liked it a lot. I downloaded 10.10 version from net. But i found out that my CD ROM drive is not able to read any CDs any more and my laptop doesn't have USB boot option. My laptop is a Pentium 4 with 1.5 GB RAM and is running Windows XP Professional SP 3. I have created 15 GB unallocated space for Ubuntu but don't know how to install in this situation.
View 2 Replies View RelatedLaptop HP G62-140US - BIOS Hewlette-Packard F.07, 10/2/2010.
Has Windows 7 Home 64 bit. Processor Intel i-3 2.1 GHz. Memory 4 GB. Hard disk 250 GB
Was not able to boot Ubuntu 9.04 from the DVD drive ('Broken Bios' error). Was able to boot Ubuntu 10.10 Seemed OK and so made a USB stick for booting.
This also worked on 2 occasions and after about a week cannot boot either from DVD drive or from USB stick. No upgradation of BIOS or Windows 7 was made.
Trying to boot from DVD drive got 'Broken Bios' error and with USB the error screen goes off too quickly and therefter the loading goes for ever.
I downloaded the disk ISO torrent and burned it to a DVD. I then ran the DVD and installed Ubuntu using the Windows installer. Upon rebooting, I get the boot menu asking which OS I want to start. I select Ubuntu and it goes to a countdown to hit ESC to select boot options. Once boot starts, I get a bunch of crap on the command lines and then it hangs. The entry it hangs on is something to do with? child-(several numbers I can't remember right now). I hope that is enough for someone to identify where it's hanging during boot. what is causing this? The computer is a Toshiba Satallite L505D-S5983. You can look up the specs for that. Processor is an AMD Athlon II M300 2.0Ghz, 32-bit, with 3GB RAM. Video is AMD M860G with ATI Mobility Radeon 4100. Primary OS is Windows 7. I'll see if I can find some paper and a pen to write down the particulars of the error. I usually use my computer for note-taking, but I obviously can't do that here.
View 9 Replies View Related