so i had dual booted my laptop with win 7 and fedora 14 when i reinstalled my win 7 i lost my fedora 14 i don't get the option in which i could select either operating system so does anyone know what is the problem
View 9 Replies
i heard this can be dual booted easily alongside windows 7 how do i do this and can it also be done with XP. i would like to keep XP and windows 7 on hand for games and other thing i know i wont be able to do on linux.
View 1 Replies View RelatedOn a new install of Fedora 12, I did the online update (using PackageKit). However, though the new kernel with images are seen in /etc/boot it still boots into the old kernel:
New-2.6.31.9-174.fc12
Old-2.6.31.5-174.fc12
Code:
$ uname -a
Linux LinuxFedora.HomePC 2.6.31.5-127.fc12.i686.PAE #1 SMP Sat Nov 7 21:25:57 EST 2009 i686
[code]...
I'm having a problem which seems restricted to Fedora. I'm trying to install Fedora 10 on a dual boot system. I have Windows 7 RC installed. When I boot the live CD to run Fedora, my screen ends up displaying Fedora on the left half, and bits of the Windows shut down screen on the right. I cannot access the Fedora menus, they are pushed off to the left out of view.
I previously experienced the same problem with an earlier version of Fedora, with the HD loaded with Ubuntu and Win 7 beta. Fedora would boot but display either the last Ubuntu or last Windows screen to the right, whichever had been running last. No other version of Linux exhibits this behavior that I have found, but my experience is limited. Is there a particular procedure that I need to run to get Fedora to use the entire video display? Does Fedora need to be installed first?
Hardware is: ASUS P5E VM HDMI, using the integrated graphics, display is a 32" LCD TV HDMI input, hard drive is a Samsung 500Gb.
I finally got my system to boot to a console prompt. This is a fresh installation of fc10 that I have struggled to get working with my old Adaptec 2940 scsi hardware. I am a little fuzzy on the whole gtk, gdm, gnome thing. So how do I go from this console prompt to configuring the new installation with desktop?So let's say I am logged on as root on the console.
View 8 Replies View RelatedI had experience with earlier Red Hat Linux dual boot with Windows 98 and XP. I now have Fedora 9 and also a Compaq Presario CQ61 with Windows 7 Home edition. I have made it so that my Laptop now boots from its CD/DVD drive instead of the hard drive which it was. Only so far when I run Fedora's 9 Desktop Live CD everything seems OK until I get to a non graphics window for logging in and there I am stuck.how I am going to log in and go into Linux Fedora's windows view.
View 3 Replies View RelatedI have at office dual booting Fedora14 + Windows 7 in Laptop Lenovo G550. I am using it regularly for work. Recently it stopped normal shut down. It showed some panic message first time and i have to force shut down.It boots normally. Now it does not give any message during Shut down but it does not shut down properly. Every time i have to force shut down.I am ready to follow instructions from forum members. I want to know that how much serious this panic is. Will it result in corruption of installation?
View 5 Replies View RelatedWhen I booted up my laptop this morning my top menu bar has been reversed. IE the "Applications, Places, System" links are all on the right hand side of the bar and the "Shutdown, IM, Wlan, etc" buttons on all on the left hand side.Excuse my noobness, but how do I go about correcting this?
View 2 Replies View RelatedWell the title says it all.I dual booted Ubuntu 10.04 with windows 7 just for an experiment.It was fun while it lasted but my 3d programs dont like it. So all the threads I found are about people that did it wrong but I dont want to get that far. So it is a fresh start. How to I remove ubuntu 10.04 and Grub.
View 2 Replies View RelatedSo I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
I tried a number of times to install dual boot with Win2k. I keep getting errors at the stage of setting up the partition for the install. When I try to choose ext4 it says Fedora cannot be installed on a bootable drive, fix the problem. I don't see how to fix it...it does not say what to do or change.
I have had other linux installed in the same partition without a problem. What gives?
150GB drive for both OS's Separate drive for data, not involved in the install.
| 72GB NTFS Win2K | 76 GB free for ext3 and swap |
LBA support on in Bios.
I'm having trouble getting my computer to dual boot between vista and fedora 10. I 'know' that both are installed, but only 1 will boot at any given time. for instance, i've been using fedora 10 for a few months now, but only this os will boot from the grub menu. to boot vista, i need its install dvd, where I choose the command prompt, and then 'bootrec /fixBoot', 'bootrec /fixMbr'. After this, Vista will boot fine, with all of my data files untouched, but now Vista is the only option that works.
To get back to Fedora, I need its installation dvd, where I go through the motions, and choose to update an installation. Again, now Fedora is the only os that works. I would like to have them both just work, but all I can do is a 'faux' install with the dvd of whichever one I want.
I am an amatuer with linux(fedora 11) and was trying to install it on my laptop which has vista installed on it. I have already allocated 120 GB to the vista partition(NTFS file system) and left 27GB of unpartitioned space on the drive. I tried installing fedora 11 the first time and my vista was absolutely corrupted. I was wondering if someone could guide me with the selections I have to make while partitioning the drive using the fedora installer DVD.
View 14 Replies View RelatedI have a PC with two seperate hard drives. One has WinXP running on it, and on the other drive I've installed Fedora 13 from a live CD downloaded from the fedora website. How do I get the system to allow me a choice of which OS I want to start on boot-up.
View 1 Replies View RelatedI looked for threads about this but didn't find them. If they are out the and I could be pointed to them it would much appreciated. I'm in the midst of building a new system and it will be a dual boot system with Windows 7 and Fedora. There will be two separate hard drives for each OS.
Currently I have a dual boot Win XP and Fedora system with a hard drive dedicated to each OS. The nice thing with this is that I found here on these forums a change to one of the Windows files that allows Windows to recognize that there are two different operating systems without having to spend the money for something like partitioning software. It was a simple one line change to an ini file, I think. Can this be done with Windows 7? If I'm not clear on what I'm asking let me know. It's been a while since I last did this so I'm a little fuzzy on it all.
I have a Toshiba NB305 on which I've installed 10.04 and then 10.10. I set it up to dual boot windows, but windows has never booted. I get a quick blue screen, and then it goes back to the grub menu. Ubuntu boots just fine. I occasionally have reason to boot into Windows. So it would be nice to get it working. Here's the output from boot_info_script.
[Code]...
Since 10.10 is not out yet, I think I'm going to try Mint. (or possibly Lubuntu - I have both ISOs copied to CD already)
Question is: Is it possible to install the new OS on the partition that now contains Ubuntu, without disturbing my Windows Vista partition? (I just need Vista for occasional use of MagicJack- otherwise I'd gladly just wipe the whole disk)
Can I just boot my Ubuntu live CD and run Disk Utility and delete the Ubuntu partition? (I prefer to use GUI rather than CLI).
I recently started experimenting with Ubuntu 8.10 and I've spent the last week mostly getting the HDD partitions and desktop to my liking so I have not installed many actual programs yet. As of this last Saturday ( 11-29-2008 ) my Keyboard (PS/2 connection) worked fine whether booted into Ubuntu or XP and worked in grub as well. I discovered on Sunday the 30th that when booted into XP my keyboard no longer worked(but my USB mouse works). The keyboard still works fine in Grub and in Ubuntu but no amount of keypressing works when booted into XP. My device manager indicates the driver has been corrupted or something (Code 39 error) and indicates the driver files are i8042prt.sys and kbdclass.sys.
Here's a list of the things I've tried so far:Tried swapping in a USB keyboard; I've tried updating the drivers in Device Manager; Tried uninstalling/reinstalling the drivers in Device Manager; I tried the "uninstall driver, shutdown, unplug keyboard, reboot, shutdown, plug keyboard back in and reboot" routine; deleting those two files and letting them be rebuilt at boot; using the recovery console to copy them from the XP install CD to the System32/Drivers folder and as a last resort I tried a repair install only to find when asked to enter the CoA code the keyboard still did not work.
I obviously borked something on the Ubuntu side that's causing a conflicting with those drivers on the XP side but I'm at a loss as to what that might be. The only thing I can remember installing since the last time the keyboard worked was maybe Wine, but for sure I did a test install of my Baldur's Gate+ToSC disc and I attempted to install Daemon Tools Lite too. I've since uninstalled those two programs and even Wine itself without results. The only other thing I can think of is that I've been messing around with the /fstab file a lot trying to get all my drives/partitions to mount up at boot like I want but I don't know how that would impact the keyboard drivers.
I need HELP WITH my wireless and ethernet I am knew to linux and very aggravated being that I have been trying to figure this out on my own for a week now . here are the spec that I got
mistey@mistey-laptop:~$ lsusb
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:00e1 Microsoft Corp. Wireless Laser Mouse 6000 Reciever
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]..
trying to add things - drivers,etc. to make it look/act as it should found out later that it's due to quirkiness of running two systems in tandem (occas)...anyways i'm going to boot a fresh copy of xP pro again tomorrow..any wisdom to be lent b4 i do...uBuntu 10.4 rocks,..so I will be a permanent user/supp of this oS. Thx for having a forum such as this as I am green as can be to this stuff
View 3 Replies View Related2 days ago i have tried to install fedora 11 ...but after i did achieved installation successfully ...and rebooted system ,the device hasn't booted from hard disk ,alternatively it has booted from the network (Broadcom)- the third booting choice in bios - . i have tried three different DVDs ....but no thing changes ...!
View 1 Replies View RelatedI just rebooted from an yum update, which updated my kernel 2.6.31-something to kernel 2.6.32-whatever-is-up-to-date-in-testing. My disk layout was LVM2+encrypted root. When I rebooted it prompted me for the encryption password as always. After I entered the correct password the loading screen (progress bar) finishes up as usual. Then, the screen is black.
It just stays in console resolution, but its just black. No typing, no chars, no X-mode, no errors, no VT-switches, nothing... just black. I remember to have started at 2.6.27-something and never had to kernel-update problems, so I dont know why it's annoying me now with todays update. I cant work with the machine any more.
I have a gateway laptop that I have attempted to dual boot, but the computer only sees the Ubuntu OS and the Vista Windows Recovery Partition. (Actually, gnome reports 3 separate Ubuntu OSs... part of the problem?)
When I type fdisk -l, I get the following message code...
On duel booting windows 7 and ubuntu on an hp laptop. All 4 partitions are taken up. I know i need to delete one partition to make room for ubuntu. Should I delete the windows recovery or hp partition? Or is there another option?
View 5 Replies View RelatedI will be buying a laptop in the coming months for college and my intention is to run Ubuntu as my primary operating system, but I still want to have Windows 7 as a crutch. I know there are multiple ways to do this (Wubi, seperate hard drives etc.) but I was wondering if it were possible to just install it and if there were an option to partition your existing hard drive so they are virtually seperate from each other.
View 5 Replies View RelatedI just searched the forum for ibex and nothing turned up - but I've recently had a surprising experience worthy of a thread (IMHO). Used to be an UBUNTU devotee, until this and working at netuxo.com which is taking me to debian...
Was making a dual boot laptop, and found that on THREE seperate attempts UBUNTU ibex, whilst it would of course make a near flawless laptop install replete with wi-fi it would NOT permit windoze to remain in the MBR or indeed on the drive. In a fashion reminiscent of M$ it took a fascist attitude and insisted on owning the machine, in one case actually stealing the partition, despite selecting option to only use free space. In the other two it just messed the MBR up.
I'm a complete an utter newbie on this forum, and indeed to linux/ubuntu in general so pardon me in advance if some of my question makes no sense/sounds silly/makes you want to exterminate all noobs. Basically, I've had bad experiences (i.e. had to use my recovery system) trying to install a dual boot system with OpenSuse and want to get some sound advice before I proceed with installing Ubuntu, instead of having to go through the agony of formatting and recovering Vista HP again, and consequently trying to teach it all over again how to suck less.
Okay, so less waffle and more questioning. Background information is that the laptop is a Compaq F560. It has at present Win Vista 32 HP on the primary partition (C), with a recovery partition on (D). It has a very basic, almost un-alterable BIOS, 1.5Gb of RAM, 120Gb HD, standard CD rom, integral nVidia 6100m graphics card, a broadcom wireless network adaptor and various other bits n' bobs.
When installing OpenSuse last time I found 2 huge flaws with my method. First one is, that I didn't have wired networking available to me at the time, and foolishly forgot to get hold of the wireless adaptor drivers before installing Suse. No biggy you say, just go back to windows and download from there. Great, except I'd bozzed up the MBR too, so couldn't do that. Suse, for it's part, ran fine. Very smooth. I just couldn't do anything with it.
What I'm now looking to do, is give Ubuntu a shot, as part of a dual boot system, with Vista on the other half. I want to make vista the default boot system. I DONT want to have to go through my compaq's recovery system again, if possible. To meet these objectives, Ultimately, I'd like to transfer all of my operations across to Ubuntu, but I'm too windows-dependent at the moment, though some sort of windows-emulator wouldn't be a bad idea if anyone knows where/how/what.
I put Ubuntu on my G60 hp laptop a few months ago and have not touched Windows 7 since. How do I go about removing windows and leave linux with access to the entire hard drive?
View 9 Replies View RelatedIm looking at getting a laptop and dual botting it with ubuntu and windows and my boss said when he did that on his laptop it caused all kind of problems, but that was 2-3 years ago. Is it still a big buggy doing this or should i be able to dual boot on any laptop i get?
View 4 Replies View RelatedI've tried to upgrade my FC8 on Presario F700 series laptop to FC 10 and facing some issues. I've a live CD (i386). Initially i tried upgrading FC 8 to FC 10 and installation was stuck around 30% completion saying its unable to fins libdbi-0.8.3-1.fc9.i386.rpm. Then I tried to install FC 10 from scratch as system went to inconsistent state and faced two issues with two different setup options -
1) when i selected necessary software to be installed for office use and development, it failed after installing 20% saying libgnomeui-devel-2.24.0-2.fc10.i386.rpm
2) i then opted for for software to be installed for office use (default option) then it failed after installing around 50% saying libXrandr-1.2.3-1.fc10.i386.rpm
im trying to understand if this is a problem due to my laptop configuration (AMD Athlon 64 X2 Duel Core) or due to issue with the live CD.
